|
|
Solent Spill Control Sw-2 2 Drum Workstation.
â€⢠Perfect For Machine Cleaning And Lubrication Areasã¢â‚¬â¢ Versatile Modular Systems To Allow Bespoke Configuration.ã¢â‚¬â¢ All Sizes Of Workfloor Have The Same 15cm Height For Easier Loading And Unloading.ã¢â‚¬â¢ Grates Can Be Removed For Cleaningworkfloor Rampã¢â‚¬â¢ Safe For Use With Any Size Of Workfloorã¢â‚¬â¢ Integral Joining Strip Ensures That It Stays In Positionã¢â‚¬â¢ Ribbed Surface For Better Grip.
Manufacturer: Solent Spill Control
ID: 5117-ye
Category: Site Safety , gt, Spill Control , gt, Secondary Containment Storage
SKU: Sol7416410a
|
|
|
Hammerite Deep Green Direct To Rust Gloss Paint 750ml Tin.
Forms A Tough Barrier Which Repels Moisture And Provides Long Lasting Protection. Corrosion Resistant With A High Gloss Colour Retention. Can Be Applied Directly Onto Rusty Metal By Brush Or Roller - No Need For A Primer Or Undercoat (just Use A Wire Brush To Remove Loose Paint Etc. To Leave A Dry Dirt-free Surface).
Manufacturer: Hammerite
ID: 5092823
Category: Lubricants , amp, Chemicals , gt, Paints , amp, Primers
SKU: Ham7212539z
|
|
|
Hitachi Power Tools Sv13ya 125mm 230w Random Orbital Sander 240v.
Sv13ya Large Soft Grip Handle. Variable Speed With Constant Speed Control. Supplied With Sanding Pad, Dust Bag And Carrying Case.power Input: 230w.no Load Speed: 7,000 - 12,000rpm.pad Diameter: 125mm.orbit Diameter: 3.2mm.weight: 1.40kg.
Manufacturer: Hitachi Power Tools
ID: Sv13ya
Category: Power Tools , gt, Corded Power Tools , gt, Orbital Sanders
SKU: Hit2740380d
|
|
|
Indexa E2-3 40x3 Morse Taper Socket.
Morse Taper Sleeves - E2-3manufactured To Din 69880. Suitable For Use In Nc Lathes With Vdi Fixing Disc. Features: All Tools Are Fully Carburised And Hardened. Surface Hardness Of 58 - 60hrc. Tensile Strength Above 1000n/mm2. Surfaces Blued; Seat, Parallel Shank And Shoulder Ground. Tools Can Be Adjusted In-situ On Radial And Axial Toolholders. Seat Shim Allows Two Tool Sizes To Be Used With One Toolholder. Ball Regulator (bullseye) Provides Easy Coolant Control.
Manufacturer: Indexa
ID: E2-3 40x3
Category: Spindle Nose , amp, Workholding , gt, Specialist Toolholders , gt, Vdi Tooling , gt, Vdi Sleeves, Blanks , amp, Chucks
SKU: Ind1483280k
|
|
|
Pcl Acas103 Schrader Std Adaptor 5/16 Hose Tailpiece.
Case Hardened, Zinc Finish. For Use With 'schrader' Type Couplings.
Manufacturer: Pcl
ID: Acas103
Category: Fluid Power , gt, Pneumatic Fittings , gt, Schrader Couplings
SKU: Pcl2591998e
|
|
|
Kennedy 100x25x6mm S/c Medium Bench Stone.
Bench Stones.a Comprehensive Range Of Bench Stones And Sharpening Stones To Cover A Wide Variety Of Sharpening And Honing Applications. Most Of The Shapes And Sizes Are Available In Fine, Medium And Coarse Grades. Available In Aluminium Oxide Or Silicon Carbide, All Stones Can Be Used Wet Or Dry To Produce Sharp Cutting Edges Or To Remove Burrs.aluminium Oxide: Man-made Abrasive Which Is Extremely Tough Enabling High Speed Penetration Of High Tensile Materials Without Causing Excessive Fracturing. This Resistance To Fracturing Makes It A Versatile Material Suitable For General Sharpening And Honing Applications.silicon Carbide: Man-made Abrasive With Very Hard, Sharp Particles. This Makes It Ideal For Non-ferrous Metals, Hard Surfaces, Alloys And Cemented Carbides. Also Used On Stone, Marble, Glass And Plastics. A Superior Abrasive That Is Able To Penetrate And Cut Quickly With Only Light Pressure Being Applied.single Grit Silicon Carbidefor Workshop Use. Ideal For Sharpening Chisels, Plain Iron And Virtually Any Metallic Implements.
Manufacturer: Kennedy
ID: 180 Grit
Category: Abrasives , gt, Finishing , amp, Polishing , gt, Oilstones , amp, Whetstones
SKU: Ken2554010k
|
|
|
Kennedy 3 Piece Curved Tooth Milled File Set.
Curved Cut - Teeth Are Arranged In Curved Contours Across The File Face. Normally Used In Automotive Body Shops For Smoothing Body Panels.curved Tooth File Setcontents: (1 Of Each) Flat, 200mm (8"), 255mm (10") And 305mm (12") Standard Cut.
Manufacturer: Kennedy
ID: Ken-032-1830k
Category: Abrasives , gt, Filing , gt, File Sets
SKU: Ken0321830k
|
|
|
Kennedy Professional Varipitch Ho Lesaw Kit.
For Producing High Quality Holes In Wood, Steel, Brass, Bronze, Cast Iron, Aluminium And Plastic. Featuring A Very Aggressive Cutting Action And M3 Hss Cutting Teeth To Give A Very Smooth Finish. Cuts Upt O 40% Faster Then Constant Pitch Saws. The Varying Tooth Pitch Gives Substantial Reductions In Noise By Disrupting Harmonics Produced When Sawing Materials Such As Tubing, Angle Etc. Improved Swarf Clearance Is Also Achieved Requiring Less Effort To Complete Each Cut. Tooth Life Is Greatly Extended, As Is Battery Life When Used With A Cordless Drill. Suitable For All Uses: En Gineering, Construction And Maintenance. 4 To 6 Teeth Per Inch. 28.5mm (1 1/8ã¢â‚¬ï¿¾) Cutting Depth.service Engineer's Kit - 9 Piecescomprises Of 22, 29, 35, 44, 51 And 64mm Variable Pitch Bi-metal High Speed Steel Holesaws With Hardened Cutting Edges, K7 Spring, K4 And K10 Arbors With Pilot Drills. Supplied In A Robust Plastic Carry Case.
Manufacturer: Kennedy
ID: 8366 110
Category: Cutting Tools , gt, Hole Making , gt, Holesaws , gt, Hole Saw Kits
SKU: Ken0502400k
|
|
|
Kennedy 100x1.90mm (5/64") Parallel Pin Punch.
Ideal For Driving Tight Fitting Pins Out Of Mechanical Assemblies Or Realigning Holes To Fit Dowel Pins. Manufactured From Hardened And Tempered Steel. With A Knurled Body For Extra Grip. Conform To Bs 3066.
Manufacturer: Kennedy
ID: 408 1.9x100mm
Category: Hand Tools , gt, Engineers Tools , gt, Toolroom , amp, Maintenance , gt, Punches - Pin, Centre, Nail , amp, Taper
SKU: Ken5182125k
|
|
|
Ejendals 737 Tegera Palm-side Coated Black/blue Gloves - Size 8.
Gloves For Assembly Work, For Protection Against Mechanical Risks. Made Of Nylon And Lycra, The Palm And Fingertips Coated Nitrile Microfoam. Anatomic Design, Seamless Lining, Coating Mfg (texture On Technology Microbubbles). Cat Ii. To En388 4131.
Manufacturer: Ejendals
ID: 737
Category: Personal Protection , amp, Clothing , gt, Hand , amp, Arm Protection , gt, Gloves , gt, Mechanical Hazard Gloves
SKU: Eje9614736e
|
|
|
Micro-speed Plus Evo Dust Mop Head Green (pk-5).
For Dry Use On Any Wall Or Floor Surface. Retains Twice The Amount Of Dust Particles As Pre-impregnated Floor Wipes. Thickness: 5.1mm.size: 14 X 48cm.
ID: 0106
Category: Cleaning , amp, Hygiene , gt, Cleaning Hardware , gt, Mops
SKU: Ctl9070212f
|
|
|
Irwin Tm130 Clamp Head.
M130a Low Cost Alternative To A Full Size Sash Clamp. Clamp Heads Have A Casst Grey Iron Head And Slide With A Steel Main Screw. Clamp Heads Are Designed To Be Fitted To A Wooden Batten 25mm (1ã¢â‚¬ï¿¾) Thick By 38mm(1ã‚â¾ã¢â‚¬ï¿¾) Wide And Any Length.
Manufacturer: Irwin
ID: Tm130
Category: Hand Tools , gt, Clamps , gt, Sash Clamps
SKU: Mar5973023c
|
|
|
Iscar Somt 060204-hq Insert Grade Ic250.
Somt Milling Insertssquare Insert Insert Grade: Ic250for High Loads And Medium To High Cutting Speed.iso Range - P/m/k: (p15-p35)(m20-m40)grade Or Coating Type: Pvdcoating Layers: Ticn+tin
Manufacturer: Iscar
ID: 5600924
Category: Cutting Tools , gt, Milling , gt, Milling Inserts
SKU: Isc1153005p
|
|
|
Kennametal Ccgt 060202hp Insert Grade K313.
Ccgt Turning Inserts80ã‚â° Rhombic Insertinsert Grade K313(m10-m20)(k05-k20)(n10-n20)(s10-s20)a Hard, Low Binder Content, Unalloyed Wc/co Fine-grain Grade. Exceptional Edge Wear Resistance Combined With Very High Strength For Machiningtitanium, Cast Irons, Austenitic Stainless Steels, Non-ferrous Metals, Non-metals, And Most High-temp Alloys.
Manufacturer: Kennametal
ID: 1162181
Category: Cutting Tools , gt, Turning , gt, Iso Turning Inserts
SKU: Kml1133984m
|
|
|
Workshop Trojan Coverall Size (xxl).
7oz Polyester/cotton Material. 2 Brass Zip Fastening Breast Pockets. Concealed Brass Zip Fastening Front. 2 Side Swing Pockets, In Self Fabric, With Trouser Pocket Access. Action Back For Ease Of Movement. Pen Pocket On Left Sleeve. Rule Pocket And Two Mitred Hpi Pockets.
Manufacturer: Workshop
ID: Crpro9620023a
Category: Personal Protection , amp, Clothing , gt, Clothing , amp, Workwear , gt, Overalls , amp, Body Suits
SKU: Pro9620023a
|
|
|
Parweld 4635 Head Assembly (longtips).
Pwd8831635t - Short Tip4435: Ezq 500a & Pez 300e.pwd8831675w - Long Tip4635: Ezq 500a, Ezq 600e, Pez F & Pez H.
Manufacturer: Parweld
ID: 4635
Category: Welding, Brazing , amp, Soldering , gt, Mig Welding , gt, Tip Adaptors
SKU: Pwd8831675w
|
|
|
Seco Dcmt 070204-f2 Insert Grade Tp200.
Dcmt Turning Insertsinsert Grade Tp200(p20-p35)(m20-m35)(k20-k40)chipbreaker F1 - For Precision Forgings And Castings At High Feed Rates.f2 - For Semi-finishing /medium Roughing On Steel & Stainless Steels
Manufacturer: Seco
ID: 74068129
Category: Cutting Tools , gt, Turning , gt, Iso Turning Inserts
SKU: Sec1124227t
|
|
|
471 50mmx33m Yellow Tape.
Suitable For Marking Off Aisles On Factory And Warehouse Floors Free Of Forklift Activity, Also Good For Marking Off Sports Hall Floors. The Area Can Be Used Immediately After Application. Strong Pvc Tape. For Internal Use Only.colours And Widths In Accordance With The British Sports Council.weight 0.326 Kg
ID: 7000028852
Category: Site Safety , gt, Traffic Management , gt, Lane Marking , amp, Hazard Tapes , gt, Adhesive Tapes
SKU: Mmm9813183m
|
|
|
Adcola Curie No.8 65dd8 5.0mm Chisel Tip.
Tips Suitable For Weller Toolsadiron Tips For P.t. Series. Curie Type No.8 (425ã‚â°c)additional Curie Types Are Available Upon Application: Curie Type 6 (325ã‚â°c), Curie Type 7 (375ã‚â°c), Curie Type 9 (475ã‚â°c).
Manufacturer: Adcola
ID: 65dd
Category: Welding, Brazing , amp, Soldering , gt, Soldering , gt, Soldering Iron Tips
SKU: Adc5163223w
|
|
|
Cathedral 200bk 310x200x200mm Mechanical Keyed Safe Black.
Tough Powder-coatde Steel Wall Safe With A High Security 2-bolt Double Lever Lock. 5mm Door Thickness And 2.5mm Body Thickness. Supplied With Interior Carpet, Spare Key And Surface Fixings. Manufacturers Rating For Cash And Jewellery.internal Dimensions (wxhxd): 306 X 196 X 140mm.external Dimensions (wxhxd): 310 X 200 X 200mm.colour: Black.
Manufacturer: Cathedral
ID: Sa200bk
Category: Site Safety , gt, Security , gt, Safes And Cash Boxes
SKU: Cth8200320k
|
|
|
Makita 793004-6 (05002) Hss Planer Blade 1923b/bd/1901.
793004-6 (05002)pack Of 2 Replacement Hss Planer Blades. Tungsten Edged. Designed For Planers 1923b/bd/1901.
Manufacturer: Makita
ID: 793004-6
Category: Power Tools , gt, Corded Power Tools , gt, Planers
SKU: Mak2806280a
|
|
|
Gedore 8000-a1 Circlip Pliers -6701460.
8000for Retaining Rings As Per Din 471, Din 983din 5254 Form Astraight Tipswith Opening Springwith Clamping Protectionforged Gedore Chrome-vanadium Special Hardened And Tempered Steelprecision Machined, Oil Hardened And Annealedblack, With Red Dipped Handles
Manufacturer: Gedore
ID: 6701460
Category: Hand Tools , gt, Pliers , amp, Grips , gt, Circlip , amp, Automotive
SKU: Ged5588001b
|
|
|
Edding 780 White Roller Pen (single).
White Paint Marker With Metal-framed Bullet Tip. Permanent, Quick Drying, Low-odour Pigment Ink Providing An Opaque Lacquer Finish. Valve-controlled Ink-flow And Heat-resistant Until 300c. For Marking, Writing And Colouring On Glass, Plastic, Metal Or Wood. Ideal For Dark And Transparent Materials.
Manufacturer: Edding
ID: 780
Category: Office Supplies , amp, Stationery , gt, Writing , amp, Graphic Supplies , gt, Marker Pens
SKU: Edd8021800k
|
|
|
Senator 60 Pce Standard Auto Blade Fuse Set.
Supplied In A Transparent Plastic Box.contents: 10 Each Of 5, 10, 15, 20 25 And 30 Amp Blade Fuses.
Manufacturer: Senator
ID: 74782
Category: Automotive , gt, Repair , gt, Fuses
SKU: Sen6152000k
|
|
|