Series 1259 M42 Straight Shank Stub Drillsmetric High Alloyed Como Steel.especially High Wear Resistancemedium/high Tensile Crni-based Alloys,hastelloy, Inconel, Nimonicstainless/acid/heat Resistant Steels,wear-resistant Sheet Metalssteels/bronzes Up To 1400 N/mmã‚â³

Series 1012 Hss-co Straight Shank High Helix Jobber Drillsmetrichigh Helix Drills, To Drill Long-chipping Materials Like Aluminium, Aluminium Alloys, Copper And Plastics. Point Angle: 130ã‚â°. Helix Angle: High. Web Thickness: Normal. Reli Ef Angle: Normal. Tolerance Of Diameter: H8. Tolerance Of Shank: F11. Manufactured To Din 338 Rn.

Snc Bearing Housings Can Be Used For Both Fixed And Floating Bearing Arrangements. Locating Rings Enable The Bearing To Be Fixed In Place Axially. The Width Of The Locating Rings Is Adapted To The Bearing Being Used. To Secure The Bearings, Two Locatings Rings Per Housing Are Required.

Soft Jawssold Individually. For Self-centring Lathe Chucks (ind-475) - Indexa 3200 And 3500. Chuck Jaws Supplied In Sets Of Three.

Kjt Seriesto Branch Tubing In Two Directions, Each At 90ã‚â° To The Original One.push-fit Fittingsquick And Simple Tube Insertion. Tapered Threads Have A Re-usable Thread Seal.pressure Range: 0.9bar Min To +10bar Max.temp Range: -20ã‚â°c Min To +70ã‚â°c Max.tube Suitability: Nylon, Polyurethane.

Micro Fine Point Correction Pen. Dense, Quick Drying White Fluid. Self-sealing Tip Prevents Drying Out And Spillage. Trichloroethane Free.

Fc02 - Serrated Ball Endprecision Swivel Ball That Can Be Used Either As A Touch Bolt Or Rest Pad. As Contact Pads These Swivel Ball Units Are Ideal For Evenly Distributing Clamping Pressure On Sloped Or Uneven Surfaces.material: Body - Medium Carbon Steel. Ball - Through Hardened Steel En 31.hardness: Bolt - Hrc 35.ball - Hrc 62.surface Finish: Black Oxide.

13 Gauge Seamless Liner With Dynema Diamondt Echnology, Lycra And Nylon Blend. Fully Dipped Nitrile Coating Provides Protection Against Oil And Grease. Reinforced Grip Pattern Ensure Firm Grip On Oily Components.conforms To En388 4543.cat Ii

Scaling And Chipping Hammers. For Boiler Scaling, Weld Dressing Etc.hardwood Shaft Manufactured From Tempered And Hardened Steel, Chisel And Point Striking Faces With Close Grain Hardwood Handle.

Two Size Tips Allow You To Remove Oil Or Grease Seals From Virtually Anything Including Wheel Bearings, Transmission Housings, Etc. Hardened And Tempered Carbon Steel Shank And Head With Oxidised Finish Tips, Chrome Plated Shank For Protection Against Corrosion. Impact Resistant Square Section Handle For Secure Grip Even When Greasy.overall Length: 310mm (12 1/4ã¢â‚¬ï¿¾).

Series 193with Drop Forged Steel Frame, Micro-lapped Tungsten Carbide Tipped Measuring Faces And Constant Force Ratchet.parallelism: (2+l/100)mm (fraction Rounded Down).counter To 0.01mm (.001").vernier Scale Graduated To 0.001mm (.0001").l = Maximum Measuring Length.accuracy: Flatness: 0.6ã‚âµm For Up To 300mm.metric

Suitable For Office, Postroom Or Stores Applications, The Scales Are Mains Or Battery Powered (4 X Aaa Batteries Not Included). Featuring A Large, Clear Digital Display, Dual Reading (metric Or Imperial), And Self-levelling, Anti-slip Rubber Feet.contents Not Included.images Are For Illustration Purposes Only

For Use On Copper, Brass, Aluminium And Thin Wall Conduit. Supplied With Spare Blade. Width: 25mm. Overall Length: 95mm.

Snmm Turning Inserts Square Insertinsert Grade T9025 (iso P20-p30, M20-m30) Mt-cvd Coated. Increased Wear Resistance Provided By The New "double-bridge" Coating Technology Allowing For Higher Cutting Conditions. Universal Grade For Medium To Rough Turning Of Steel At Medium Speed.tu-heavy Roughing Chipbreaker, Single Sided.

Basic Range Of Stretch Fabric Plasters Are Hypoallergenic, Sterile And Individually Wrapped.economic Alternative.highly Absorbent And Low Adherent Pad.comprehensive Range.

Used For Setting Up Work On Machine Tables And Surface Plates. Made To Bs906 : Part 1 : Grade B For Flatness And Parallelism Of Working Faces. Supplied In Pairs. Calibration Certificate Available On Request At Extra Cost: Please Contact Us For Further Information.

Ccmt Turning Inserts 80ã‚â° Rhombic Insertsinsert Grade - At530iso Range (p05 - P30)coating Layers : Cermet Tialn Pvdcoated. For Pre-finishing And Finishing Ongeneral Steel, Suitable For Continuous Andinterrupted Cutting

Manufactured From Microthan/polyester With Half-lined Kevlar, Which Protects Against Cuts. Hook 'n' Loop Fastening, Chrome-free, Kevlar Palm, Cut-protection, Reinforced Index Finger, Reinforced Seams, Machine Washable At 40ã‚â°c, Reflectors, Curved Fingers, Lycra Between The Fingers.

373rugged & Safe Clamp Meter For Industrial, Commercial And Residential Electrical Work.bright Backlit Display600a Ac Trms.600v Ac/dc.resistance To 6w.capacitance To 1,000uf.32mm Jaw Size.3 Year Warranty.cat Iii-600v/cativ-300v Safety Rating.

Quilted Polycotton Bodywarmer.stud And Zip Front.stand-up Collar.elasticated Arm Holes.2 Patch Pockets With Hook-n-loop Fastening Flaps.attractive Brushed Check Cotton Flannel Lining.1 Inside Patch Pocket With Flap.

The Dressing Pad Has A Low Adherent Contact Layer, Which Is Designed Not To Stick.it Is A Thick And Comfortable Sterile Eye Pad Attached To A Continuous Stretch Bandage For Ease Of Use.also Suitable As A Replacement In All First Aid Kits.

Hygiene Kit For Howard Leight Impact Sport Earmuff.includes One Pair Of Replacement Ear Cushions And One Pair Of Foam Inserts.extends Performance And Lifetime Of Earmuff.recommended Replacement Every 6 Months With General Use, More Frequently With Heavy Use.snap-in Ear Cushions Are Standard On All Howard Leight Earmuffs.

Universal Wipes For General Hand Cleaning, Such As Removing Oil, Grease And Grime. The Impregnated Tough, Extra Large Wipes Are Available In A Handy, Easy-to-use Pack Which Can Be Used Whilst On The Move, With No Need For Water.pack Quantity: 150.

Slip-on. To En Iso 20345 S3 Src. Steel Toecap And Flexible Composite Midsole Plain Front Slip-on Shoe. Premium Leather Upper. Eva Footbed Providing Increased Comfort. Dual Density Exclusive Ladies Outsole. Lightweight And Flexible. Elasticated Sides For Better Fit. Anti-static Properties.

Highest Possible Energy Class Celma Eei = A2 Batnominal Life Time Up To 100000 Hours (at 50 Ââ°c)large Temperature Rangeintelligent Voltage Guard (overvoltage Indication And Undervoltage Shutdown)precise Lamp Operation Using Adjustment Of Lamp Parametersadvanced Smart Heating For Min. 50000 Starts Without Replacement Of Lampsconstant Luminous Flux Irrespective Of Fluctuations In Mains Voltagedesigned For Thd