|
|
Kennedy Chrome Leather Grey Welder's Gaiters.
A Range Of Economically Priced Rugged Workwear Manufactured From High Quality Selected Chrome Leather. Spatter-resistant And Tear-resistant. The Full Range Offers Head-to-toe Protection Against Weld Spatter And Grinding Sparks. Suitable For Use In Workshops, Foundries And On-site.gaitersfor Wearing Over Workshoes To Protect Against Weld Spatter And Grinding Sparks. With Hook-n-loop Fastening On Back Of Calf And Buckle Adjustment Around Shoe. Double Stitched And Riveted Seams For Extra Heavy Duty Use. Ce Approved To En470-1 Cat Ii.size: 35cm.
Manufacturer: Kennedy
ID: 1892
Category: Personal Protection , amp, Clothing , gt, Footwear , gt, Safety Overshoes
SKU: Ken8858260k
|
|
|
Himalayan W102 Navy Tool Vest Small 36/38.
Teflon Coated Fleece Lined Pilot Jacket. Snapfast; Accessories Can Be Added To The Tool Vest. 50% Cotton/50% Nylon.
Manufacturer: Himalayan
ID: W102 Sml 36/38
Category: Personal Protection , amp, Clothing , gt, Clothing , amp, Workwear , gt, Body Warmers
SKU: Him9625200a
|
|
|
Impacto Protective Products Inc 714-20 Anti-impact Liner& Support - S.
Fingerless Nylon Lycra Glove With Polycotton Liner And Vep (visco-elastic Polymer) Padding On Palm And Thumb Web Area. Detachable Leather Wrist Support. Typical Uses: Heavy Industrial, Jack Hammer, Grinder, Impact Tools. Impact, Vibration And Repetitive Strain Protection. Protective Impact Resistant Gloves Protect Effectively The Palms And Wrists Against Traumatic Impacts.designed For Use Where Vibration Can Cause Extreme And Permanent Damage To The Hands.help Prevent And Relieve Pain Associated With Rsi (repetitive Strain Injury).conforms To En388 2521cat Ii
Manufacturer: Impacto Protective Products Inc
ID: Crimp9611351e
Category: Personal Protection , amp, Clothing , gt, Hand , amp, Arm Protection , gt, Gloves , gt, Cut Resistant Gloves
SKU: Imp9611351e
|
|
|
Orbit International Jkrs Argyle Black Jacket - Size S.
Ripstop Breathable Waterproof Fabric. Contrast Trim. Full Mesh Lining. Detachable Hood And Liner. Two Lower Pockets, And Two Chest Pockets.
Manufacturer: Orbit International
ID: Jkrs
Category: Personal Protection , amp, Clothing , gt, Clothing , amp, Workwear , gt, Coats, Jackets , amp, Fleeces
SKU: Orb9624200a
|
|
|
Pal N77113 Non-woven Visitors Coat Large (pk-25).
Knee-length Coat Made From A Soft, Yet Strong Nonwoven Polypropylene Fabric With Front Popper Fastenings.
Manufacturer: Pal
ID: N77113
Category: Personal Protection , amp, Clothing , gt, Clothing , amp, Workwear , gt, Disposable Coats
SKU: Pal9624030c
|
|
|
Kobe Red Line Hp5040k Hammer & Chisel Kit.
Hp5040ksupplied With Flat Chisel, Spot Weld Breaker, Taper Punch And Rivet Cutter. Variable Power Regulator. Accepts All Standard 0.401" Shank Tools. 1/4" Npt Air Inlet Thread For 10mm Air Hose, 90psi Air Pressure, 4cfm* Air Consumption.stroke Length: 40mm. Sound Pressure Level: 112dba. Sound Power Level: 121dba. Vibration Level: 15.5m/s2. Overall Length: 135mm.*based On A 15 Second Cycle Per Minute Average Use.
Manufacturer: Kobe Red Line
ID: Sg-0101rk
Category: Power Tools , gt, Air Tools , gt, Air Hammers
SKU: Kbe2703150k
|
|
|
Uvex 2112022 X Fit Dispenser Refill Pack (300-pr).
The Ergonomically Pre-shaped Uvex X-fit Disposable Earplugs Are Characterised By Very High Levels Of Sound Absorption, Making Them Suitable For Use In Extremely Loud Environments. The Soft Foam Offers Exceptional Comfort, Even When Worn For Extended Periods.for Dispenser Uvx9582000a.
Manufacturer: Uvex
ID: 2112022
Category: Personal Protection , amp, Clothing , gt, Hearing Protection , gt, Ear Plugs
SKU: Uvx9582130b
|
|
|
Pcl Aca6582 Standard Adpatorsrp3/8 Female.
Case Hardened With Passivated Finish. For Use With 'standard' And 'vertex' Type Couplings. Hard Wearing Passivated Zinc Finish For Double Protection Against Corrosion.
Manufacturer: Pcl
ID: Aca6582
Category: Fluid Power , gt, Pneumatic Fittings , gt, Coupling Adaptors, tailpieces
SKU: Pcl2591996b
|
|
|
Regatta Tra642 Uproar Men's Navy Soft Shell Jacket - Size S.
Has An Adjustable Shock-cord Hem. Warm Backed Woven Stretched Soft-shell Fabric. Wind-resistant. Durable Water-repellent Finish. Quick Drying Fabric. Lightweight And Easy To Wear. Two Zipped Lower Pockets. Interactive Full Length Zip.
Manufacturer: Regatta
ID: Tra642
Category: Personal Protection , amp, Clothing , gt, Clothing , amp, Workwear , gt, Coats, Jackets , amp, Fleeces
SKU: Reg9629341k
|
|
|
Devcon 400ml "5-minute" Epoxy Adhesive.
Clear, Permanent Non-shrinking Bonds. Bonds Metals, Glass, Ceramics, Concrete And Wood. Works Down To -40ã‚â°c When Cured. Max. Operating Temperature: 93ã‚â°c.pot Life: 4 Minutes. Mix Ratio: 1:1.available In 400ml Cartridges, 70g Twin Tubes And 28g Dev-tube Dispenser.
Manufacturer: Devcon
ID: 14272
Category: Adhesives , amp, Sealants , gt, Two-part Adhesives
SKU: Dev7112038h
|
|
|
Staedtler 341 Lumocolor Whiteboard Compact Red (pk-10).
Lumocolor 341with Universal Tip For Variable Line Widths Of Aprox. 1-2mm. Dry Safe - Can Be Left Uncapped For Days Without Drying Up (test Iso 554).
Manufacturer: Staedtler
ID: 341-2
Category: Office Supplies , amp, Stationery , gt, Writing , amp, Graphic Supplies , gt, Marker Pens
SKU: Std8461060k
|
|
|
Kennedy 145mm/5.3/4" Pro-torq Diag/cutter 1000v Ins.
Insulated Diagonal Cutting Nippersespecially Suitable For Production Line Environments Where Repetitive Work Is Undertaken. Double Polished Head And Joint With Induction Hardened Cutting Edges.
Manufacturer: Kennedy
ID: 2031nv
Category: Hand Tools , gt, Pliers , amp, Grips , gt, Nippers , amp, Side Cutters
SKU: Ken5585080k
|
|
|
Kennedy Ultra Slim Knife - 13-seg Snap-off Blade.
Featuring A High Strength Abs Plastic Construction, Tihs Ultra Slim Knife Has A Retractable 13 Segment Snap-off Blade And Auto Lock.
Manufacturer: Kennedy
ID: Sx48-1
Category: Hand Tools , gt, Cutting , amp, Sawing , gt, Knives - Snap-off Blade
SKU: Ken5370250k
|
|
|
Smc Kq2h10-12a Male Connector 10 X 12.
Kq2h Seriesone-touch Fitting Different Diameter Straight/male Connector/straight Union. Colour: White.push-fit Fittingsquick And Simple Tube Insertion. Tapered Threads Have A Re-usable Thread Seal.pressure Range: 0.9bar Min To +10bar Max.temp Range: -20ã‚â°c Min To +70ã‚â°c Max.tube Suitability: Nylon, Polyurethane.
Manufacturer: Smc
ID: Kq2h10-12a
Category: Fluid Power , gt, Pneumatic Fittings , gt, Straight Union Connectors
SKU: Smb2915602p
|
|
|
Carplan All Seasons Screen Wash 5 Ltr.
Concentrated Winter Screen Wash With Anti-freeze. Designed To Clean Windscreens Leaving Them Crystal Clear Even On Cold Mornings
Manufacturer: Carplan
ID: Swa005
Category: Automotive , gt, Care , gt, Windscreen Wash And Glass Cleaners
SKU: Tet7321550d
|
|
|
Iscar Vcmt 160408-14 Insert Grade Ic20.
Vcmt Turning Inserts 35ã‚â° Rhombic Insert7ã‚â° Positive Flank Inserts Used For Semi-finish And Finish Turning. Chip Breaking In Moderate Feed Range. Positive Rake, Low Cutting Forces. Used For A Wide Range Of Materials, Including Soft And Exotic Alloys. Insert Grade Ic20iso Range - (m10-m25)(k10-k20)(h05-h15)(s05-s20)(n05-n25) Coating - Uncoated An Uncoated Grade For Semifinishing, Finishing And Semiroughing Of Aluminum, Cast Iron And Stainless Steel.
Manufacturer: Iscar
ID: 5502403
Category: Cutting Tools , gt, Turning , gt, Iso Turning Inserts
SKU: Isc1153668b
|
|
|
Sitesafe Solid Socket Steel Yd Cable Laying Shovel.
Specially Designed For Digging Trenches For Cables. Generally Used In Conjunction With The Trenching Shovel. All Blades Are Hardened And Tempered With An Epoxy Coating.s11322type: Solid Socket.handle Type: Myd Metal Framed.shaft: Metal.blade Material: Carbon-manganese Steel.blade Size: (w)140 X (h)280mm.overall Length: 980mm.
Manufacturer: Sitesafe
ID: Crssf5227813d
Category: Hand Tools , gt, Gardeners , amp, Contractors , gt, Shovels
SKU: Ssf5227813d
|
|
|
Marigold G26g Green Nitrile Gloves Size 7.1/2.
Nitrile Formula For Resistance To Many Solvents And Oil Based Chemicals Unlined With Superior Raised Diamond Grip Pattern. Open Cuff Allows Ventilation To Keep Hands Cool. Good Puncture And Abrasion Resistance. Silicone Free To Provide Less Risk Of Product Contamination.length: 330mmen388: 3.0.0.1bs En374: 3.6.6.3. Ajkl
Manufacturer: Marigold
ID: Green Nitrile G26g
Category: Personal Protection , amp, Clothing , gt, Hand , amp, Arm Protection , gt, Gloves , gt, Chemical Resistant Gloves
SKU: Mrg9616222k
|
|
|
Sykes-pickavant 083100 Twin Leg Puller.
Industrial Reversible/double-endedthe Double-ended Reversible/double-ended Drop Forged Steel Jaws, Are Heat Treated For Strength And Durability. They Can Be Used Internally Or Externally.083100: Spread: 200mm. Reach: 140mm.
Manufacturer: Sykes-pickavant
ID: 8310000
Category: Automotive , gt, Tools , gt, Pullers , amp, Separators , gt, Pullers - Mechanical
SKU: Syk5032151b
|
|
|
York Stainless Steel Polishing Kit.
Used To Achieve A Desired Finish On Stainless Steel. Contents: 1xm14 Backing Pad, 2x Surf Cond Discs Brown (crs), 1x Surf Cond Disc In Colours: Maroon (med), Blue (vf) And Grey (ultra Fine), 1x Felt Disc (white) 1x Bar Of Compound (yellow)
Manufacturer: York
ID: 63642563187
Category: Abrasives , gt, Finishing , amp, Polishing , gt, Surface Conditioning Kits
SKU: Yrk2809200k
|
|
|
Eclipse Magnetics E934 Magnetic Vee Block.
Powerful Magnet In A Precision-ground Mild Steel Case. The Vee Block Can Be Used On Its Base, Side Or End To Hold Components For Machining Operations. The Large Vee Can Hold Diameters Up To 65mm And The Smaller Vee Diameters Up To 20mm. The On/off Switch Toggles Both Vees Simultaneously. Suitable For Holding Cylindrical And Complex Workpieces For Marking, Spark Erosion, Grinding, Measurement And Inspection Operations.magnetic Adhesion (top And Bottom Faces): 200/150kg.
Manufacturer: Eclipse Magnetics
ID: E934
Category: Hand Tools , gt, Engineers Tools , gt, Magnetic Products , gt, Magnets
SKU: Ecl4000473x
|
|
|
Norton Saint Gobain Mf114 Medium Inda Triangular File 102x6mm.
Usedd For Imparting Uniform Finish On Precision Machined Parts, In Tool And Die Manufactures And Chamfering/deburring/radiusing.triangular.type: Mf114.grade: Medium.
Manufacturer: Norton Saint Gobain
ID: 61463686265
Category: Abrasives , gt, Finishing , amp, Polishing , gt, Oilstones , amp, Whetstones
SKU: Nor2551041b
|
|
|
Dewalt D28710-lx Abrasive Chopsaw 355mm 110volt 2200watt.
D28710high Power, Abrasion Protected Motor With Heavy Duty Steel Base. Adjustable Spark Guard. For Cutting Ferrous Metal.power Input: 2200w.no Load Speed: 3800rpm.max. Cut: 120mm.
Manufacturer: Dewalt
ID: D28710-lx
Category: Power Tools , gt, Corded Power Tools , gt, Saws , gt, Cut Off Saws
SKU: Dew2722869k
|
|
|
Evolution Power Tools Raptor 14" Saw Blade For Stainless Steel.
Tct Industrial Premium Stainless Steel Saw Blades 355mm. Designed Specifically To Cut Stainless Steel. Material Applications Include: Square Tube, Angle Iron, Stainless Steel Plate, Diamond Plate, Pipe And Tube.
Manufacturer: Evolution Power Tools
ID: 90tblade
Category: Power Tools , gt, Consumables , amp, Accessories , gt, Circular Saw Blades
SKU: Evl2807060k
|
|
|