Mini Multimetera Handy, Pocket-sized Everyday Meter For Every Engineer, With The Added Benefit Of A Built-in Volt Stick And Torch.specifications:display: 2000-countdc Voltage Ranges: 0.1mv ~ 600vac Voltage Ranges: 1mv -~ 600vac/dc Current: 0.1ã‚âµ- 200mameasuring Rate: 2 Per Seconddimensions: 54(w) X 104(h) X 36(d)mmpower Supply: 2x Aaa 1.5v Batteries (included) Approvals: Car Iii 1000v, Cat Iv 600v Safety Standards En 61010 1.ce, Pollution Degree Ii

710easily Reversible Latchbolt, Adjustable Springing Feature. Supplied With Square Forend And Strike. Supplied With Two Keys.

Heat Sealed Disposable Glove Specifically Designed For The Catering Market. Powder Free To Minimise Particulate Contamination.cat I

Protects Metal From Rust And Corrosion, Penetrates Stuck Or Jammed Parts, Displaces Moisture, And Lubricates Just About Anything. Wd-40 Is Also Great When It Comes To Cleaning Grease, Grime And Other Marks From Most Surfaces.

Fkt-cty250cavity Fixings Kit Complete With Nylon And Metal Self-drive Plasterboard Fixings And Intersets. Set Contents:25 X Nylon Self Drill With Screws25 X Metal Self Drive With Screws25 X 4 X 40mm Intersets25 X 5 X 40mm Intersets

Bowex Curved Tooth Gear Couplings Are Specifically Suited To Compensate For Axial, Radial And Angular Shaft Misalignment. They Can Be Assembled Both Vertically And Horizontally Without The Need For Special Assembly Tools. Due To The Nature Of Curved Tooth Gear Couplings, Any Angular And Radial Displacement Edge Pressure In The Spline Is Avoided, Making Them Virtually Wear Free During Operation. Bowex Couplings Include An Electroconductucive Nylon Sleeve (pa-cf), Are Suitable For Power Transmission In Drives In Hazardous Areas And Explosion Proof Use.(please Note: When Ordering You Will Need Two Hubs And One Sleeve As These Are Sold As Separate Items).

Industrial Reversible/double-ended Adjustableused For The Removal Of Gears, Ball Races, Bearings, Pulleys And Sprockets From A Drive Shaft. With Reach Capacities Of 75, 100, 150 And 200mm. All Sizes Have Double-ended, Adjustable, Reversible Legs And Can Be Used For Internal And External Applications. Selection Always Use A Three Jaw Puller Whenever Possible. This Produces Better Load Distribution Across The Jaws And Easier And Safer Removal Of The Part. Determine What 'spread' Is Needed - This Is The Width Of The Part To Be Removed. The Reach Capacity Is Determined By The Depth Of The Part To Be Removed.all Pullers Can Be Assembled For Internal Or External Use.combined 2+3 Jaw Pullers - '4-in-1'supplied With 2 And 3-legged Yokes And 3 Leg Assemblies - Allowing The Pullers To Be Configured In 2 Jaw Internal / External Or 3 Jaw Internal / External Assemblies.

Elbow Connector To Stemquick And Simple Tube Insertion. Compact Lightweight Design With A Well Proven Tube Retaining System. Tapered Threads Have A Re-usable Thread Seal And Parallel Threads Have A Rubber Washer. Main Body Manufactured From Nickel Plated Brass, Acetal Resin, Pbt With A Stainless Steel Retaining Ring, Nitrile Tube Seal And Acetal Resin Tube Release Collar.pressure Range: -0.9bar Min To +10bar Max. Temp Range: -20ã‚â°c Min To +70ã‚â°c Max. Tube Suitability: Nylon, Polyurethane.

Removes Door Panel Clips Without Breakage. Simple Action - Insert The Tool And Push The Clip Out.

14cm Diamond Needle Files With Soft Touch Foam Rubber Handles For Comfort.

Ergonomically Designed Knee Pad Which Does Not Hinder The Wearer When Walking. 100% Moulded Polythene.

Single White Brackets For The Matlock Twin-lock Shelving System.

Conventional Size, Easy To Read Indicator For General Applications.

Snmg Turning Insertssquare Insertdouble-sided Square Inserts, With Negative (0ã‚â°) Relief Angle For Medium Machining.used For Steels, Stainless Steel And High Temperature Alloys.insert Grade Ic6025iso Range - (m15-m35)coating - Cvd Ticn+al2o3+tin Tough Substrate For Machining Stainless Steel At High Feeds At Medium Cutting Speeds.

6-flute, Centre Cutting End Mills. Rough And Finish In One Operation. Minimum Vibration Chatter And Chip Recutting. Manufactured To Din844 / Din1835. Length Iso 3338/2.

Fkt-fmsc 520screw And Plug Pack Suitable For Use In Concrete, Brickwork, Stone, Blockwork And Plasterboard.set Contents:160 4.0x35mm Pozi Countersunk Screws.160 6.0x30mm Red Plug.100 5.0x45mm Pozi Countersunk Screws.100 7.0x35mm Brown Plug.

1-93-935constructed Of Structural Foam For Extra Strength Complete With An All Round Water Seal Ensuring Safe And Dry Storage With An Extra Large Storage Capacity, Large Metal Rust-proof Latches And Padlock For Security. It Has A 3/4 Length Tote Tray To Give Access To The Large Tool Storage Area Inside And Integrated V-groove On Lid Which Helps When Sawing.

Replacement Sweatbands For Centurions Range Of Safety Helmets.

Works Best On Both Int. And Ext. Burrsmade Of H.s.s. Hardness 62-64rcincl. Angle 40 Degpack Weight 31 Grpack Quantity 10 Piecesfor Right Hand Users

For Cleaning Glass And Vitreous Surfaces Without Film Or Smearing. For Use On Lenses, Glass Surfaces In Photocopiers, Windows, Mirrors, Tiles And Other Glazed Areas. Size: 400ml.

More Power, More Features With No More Batteries.ã¢â‚¬â¢ Prints 6/9/12/19 Mm Widths.ã¢â‚¬â¢ Powered By A Lithium-ion Battery Eliminating The Inconvenience Of Aa Batteries.ã¢â‚¬â¢ Charge And Go Unlike An Ac Adapterã¢â‚¬â¢ Large 7 Cm X 3,8 Cm Screen That Displays Two Lines Of Text

An Effective Way To Obtain Depth Filtration With High Contaminant Holding. Pure Polypropylene, Surfactant-free Depth Filter Ensures Low-pressure Drops, With Exceptional Dirt-holding Capabilities.dimensions: 60mm X 10".

Durable Plastic Headband Equipped With Soft, Flexing Pads Adjusting To Jaw And Head Movements. It Can Be Worn Under The Chin Or Behind The Head. Conforms To: En352-2. Suitable For Intermittent Wear As The Ear Plugs Do Not Need To Be Rolled To Be Fitted Allowing Easy Insertion.

Supplied With Earth Terminal That Is Riveted In Base Of Mounting Blockdo Not Have To Be Derated When Used With Fluorescent Or Inductive Loadscomplies With Bs En 60669-1:1999

Ideal For Both Temporary Heating And Drying Paintwork & Plaster.ã¢â‚¬â¢ Twin 1400w Infra-red Elementsã¢â‚¬â¢ Available In 2 Or 3 Heat Settingsã¢â‚¬â¢ Easy Mobility With Integral Wheelã¢â‚¬â¢ Robust Plastic Body Resists Bumps And Scrapesã¢â‚¬â¢ Heat Output: 2.8kwã¢â‚¬â¢ Weight: 14.30kg