Dijet Dds 8.00mm M-series Sigma Drill
    Dijet Dds 8.00mm M-series Sigma Drill.

    Can Give Five Times More Tool Life And Higher Productivity Than Conventional High Speed Steel Drills And Have Regularly Out-performed Other Similar Carbide Drills. A Greater Web Thickness Increases Rigidity Providing Tighter Tolerances. The Special Carbide Grade Is Particularly Suited To Deep Hole Drilling In Steel. Unique Flute Configuration Produces A Controlled Chip Formation For Effective Swarf Removal And The Sigma Point Geometry Reduces Heat And Wear At The Cutting Edge Increasing Tool Life. Sigma Drills Can Easily Be Reground On Conventional Cutter Grinders, Reducing Cost Of Regrinds. Self Centring Eliminates Spot Drilling. Dds-m. Jc Coated (tin) Standard Series (recommended 4xd). For High Hardened Steel Up To 70hrc.for All Dimensional Specifications Please Refer To Our Catalogue.



    Manufacturer: Dijet
    ID: Dds-080mjc3500h
    Category: Cutting Tools , gt, Hole Making , gt, Carbide Drills , gt, Carbide High Performance Production Drills
    SKU: Dij1022080s




Kennedy 3/8" Borex100ft Long Airline Hose
    Kennedy 3/8" Borex100ft Long Airline Hose.

    Reinforced With A Polyester Fibre Braid. Used In Pneumatic Airline Systems, Crop Spraying, Transportation Of Gases And Liquids, Decanting Of Acids, Salts And Many Other Chemicals. Fully Approved For Food Contact Applications. Operating Temperature Range Of -20ã‚â°c To +60ã‚â°c.supplied In 30m (100ft) Reels.



    Manufacturer: Kennedy
    ID: 002-108-clcl-04
    Category: Fluid , amp, Water Control , gt, Hoses , gt, Airline Hoses
    SKU: Ken2581030k




Polyco 8803g Polyflex Palm-side Coated Grey Gloves -  Size 9
    Polyco 8803g Polyflex Palm-side Coated Grey Gloves - Size 9.

    Low Linting Reduces The Risk Of Product Contamination. Designed To Be Tight Fitting To Give Maximum Dexterity. Elasticated Knit Wrist. Typical Handling Applications: Component Handling, General Assembly, Light Engineering Work And Electronics.used For Inspection Lines, Can Be Made From Lint-free Material For Less Contamination.added Surface To Furnish Extra Grip During Application.conforms To Bs En388 4.1.4.2cat Ii.



    Manufacturer: Polyco
    ID: 8803g Grey
    Category: Personal Protection , amp, Clothing , gt, Hand , amp, Arm Protection , gt, Gloves , gt, Mechanical Hazard Gloves
    SKU: Ply9611663d




Kennedy 4.0mm 2fl L/s B/nose Carbide Slot Drill
    Kennedy 4.0mm 2fl L/s B/nose Carbide Slot Drill.

    Long Series - 2 Flute - Metricfor Optimum Performance And Maximum Swarf Removal When Plunging, Slotting And Routing In Most Materials Including Brass, Aluminium, Non Ferrous And Other Soft Materials. Manufactured To Uscti Standards.metric Tolerancesdiameter: Over 1.00 ~ Up To 6.00. Tolerance: +0.000, -0.050.diameter: Over 6.00 ~ Up To 25.00. Tolerance: +0.000, -0.080.



    Manufacturer: Kennedy
    ID: Crken1611940k
    Category: Cutting Tools , gt, Milling , gt, Ball Nose , gt, Carbide B, n Slot Drills - Long Series
    SKU: Ken1611940k




Kennedy 1/8" Hss-cobalt Kc3 Throwaway Cutter
    Kennedy 1/8" Hss-cobalt Kc3 Throwaway Cutter.

    Short Series - Inch.kennedy Kc3 Throwaway 3* Flute Endmills Are Manufactured Hss-co 5% Making Them Much Tougher Than Hss. This Means That Kennedy Endmills Can Be Used At Higher Speeds And Feeds Which In Turn Gives Greater Productivity. Suitable For Slot Drilling And End Milling. Cutters Are Held In Adaptors/chucks By The Action Of A Set Screw Which Locates On The Shank Flat Giving Quick And Easy Cutter Change. *except: 1mm Cutters, 2mm And 1/16" Ball Nose Cutters, All Of Which Have Two Flutes.inch Tolerances: Diameter: Over 1/16" ~ Up To 1/4". Tolerance: +0.0005, -0.0013.kennedy Kc3 Endmills Are Available Uncoated, Tin Coated And Ticn Coated.tin (titanium Nitride) Provides A Surface Hardness In The Region Of 2300hv Which Offers Improved Wear Resistance, Tool Life And Productivity.ticn (titanium Carbonitride) Gives A Surface Hardness In The Region Of 3000-3500 Hv, Excellent Wear Resistance And Good Heat Resistance. This Coating Is Used For The Same Things As Tin But Also For Hard Steels, Stainless, Cast Iron, Brass & Bronze.



    Manufacturer: Kennedy
    ID: Crken0620580k
    Category: Cutting Tools , gt, Milling , gt, Throwaway Cutters , gt, Kc3 Milling Cutters
    SKU: Ken0620580k




Kobe Space Heater Propane Fuelled 58000 Btu
    Kobe Space Heater Propane Fuelled 58000 Btu.

    Ksh058two Layer Stainless Steel Combustion Chamber Helps To Keep A Constant Temperature. Stainless Steel Casing And Heavy-duty Construction Means Reliable, Long Term Use.overheat Protection Safety Device. Automatic Gas Shut Off. Supplied With Gas Hose And Propane Regulator.input Voltage: 220v-240v/1ph/50hzpotection Class: Ip44fuel Consumption: 1.24kg/hr.heated Volume: 200 Mã‚â³.weight: 8kg



    Manufacturer: Kobe
    ID: Ot318
    Category: Power Tools , gt, Heating And Ventilation , gt, Space Heaters
    SKU: Kbe2737810k




Jubilee Junior Assortment
    Jubilee Junior Assortment.

    165 Mild Steel Zinc Protected Nut And Bolt Clips, Supplied In A Clear Re-usable Plastic Storage Box. Contents: 25x 7 - 9mm, 8 - 10mm, 9 - 11mm, 30x 10 - 12mm, 11 - 13mm, 12 - 14mm.



    Manufacturer: Jubilee
    ID: Ja165
    Category: Fasteners , gt, Hose Clips , gt, Assorted Kits
    SKU: Jub6623051b




Matlock 2.0 Ton Beam Clamp C/w Certificate
    Matlock 2.0 Ton Beam Clamp C/w Certificate.

    1,000 To 5,000kg Range Capacities. Clamp Jaw Designed To Reduce Flange Stress By Distributing Load Away From Beam Edge. Easily Mounted With Threaded Handle. Fits A Wide Range Of Flange Widths And Beams. En 13155:2003 + A2:2009 And Ec Council Directive 2006/42/ec Machinery Compliant.



    Manufacturer: Matlock
    ID: Crmtl9411020k
    Category: Storage , amp, Handling , gt, Handling , gt, Beam Clamps
    SKU: Mtl9411020k




Kennedy 44mm Long Multi-tooth Cutter
    Kennedy 44mm Long Multi-tooth Cutter.

    Faster, Easier And Are More Accurate And Dramatically Outperform Conventional Twist Drills, In Terms Of Cutting Speed And Tool Life. Used On Structural Steel, Plate, Tubing Or Material That Requires A Fine Finish Hole. Cutting Edge Geometry Increases Cutting Performance And Reduces Cutting Forces Producing A Solid Slug Of Material Which Is Ejected When The Cutter Breaks Through And The Hole Is Complete. An Ideal Choice For All Magnetic Based Drilling Applications In General Engineering, Construction And Fabrication.sizes Available: 12 - 52mm.bore: 1/4" (6.35mm).depth Of Cut: 50mm.overall Length: 85mm.3/4in Weldon Shank.



    Manufacturer: Kennedy
    ID: 44mm Long
    Category: Power Tools , gt, Consumables , amp, Accessories , gt, Multi-tooth Annular Cutters
    SKU: Ken2882440k




Kennedy Spot Weld Remover
    Kennedy Spot Weld Remover.

    Suitable For Cutting Holes In Steel Metal, Steel, Plastic And Brass. The Hardened Steel Cutter Is Reversible Increasing Tool Life. Adjusting The Spring Loaded, Centre Point Screw Accurately Controls The Depth Of Cut, Allowing The Top To Be Removed Whilst Leaving The Lower Panel In Place.



    Manufacturer: Kennedy
    ID: 070472sb
    Category: Automotive , gt, Tools , gt, Bodywork Tools , gt, Spot Weld Removers
    SKU: Ken5031200k




Kennedy Double Sided 100% Wool Mix Compound. Pad
    Kennedy Double Sided 100% Wool Mix Compound. Pad.

    Twisted 100% Wool Pads - For Fast Results On Large Areas. Pad Can Be Flipped Over To Use Both Sides, I.e. One Side For First Pass - One Side For Finishing, Or Just To Double The Life Of The Pad.use With Spindle Adaptors



    Manufacturer: Kennedy
    ID: 40411
    Category: Power Tools , gt, Consumables , amp, Accessories , gt, Polish Ing Bonnets, buffing Pads
    SKU: Ken2805120k




Osborn Warwick No.1nfx72 Taper Tap
    Osborn Warwick No.1nfx72 Taper Tap.

    Type Nf (american National Fine).m2 Bright, Straight Shank, Unheated Ground Surface Giving Low Friction And Good Chip Flow. Suitable For Machining Non-ferrous Materials And General-purpose Applications. Available In Taper, Second And Bottom Leads. To Ansi B94.9 (1987).



    Manufacturer: Osborn
    ID: F1910073
    Category: Cutting Tools , gt, Threading , gt, Taps - Production , gt, Hss-co Production Taps
    SKU: Mgz0850318r




Sumitomo Dtr55cr 2020 K17 Toolhold Er
    Sumitomo Dtr55cr 2020 K17 Toolhold Er.

    The Sumitomo T-rex Can Replace Your Costly Dnmg Applications With The Economical T-rex System!features & Benefits55 Triangle Insert.6 Cutting Edges Versus The Standard 4 Edges Of A Dnmg Insert.rigid Clamping System Ensures Accurate Insert Indexing.up To 2.5mm (0.100") Depth Of Cut.available In The -lu And ?gu Chipbreakers With Grades Ac700g, Ac2000 And Ac3000.suitable For All Steels Including Stainless.



    Manufacturer: Sumitomo
    ID: 48836
    Category: Cutting Tools , gt, Turning , gt, Iso Toolholders , gt, External Toolholders - Top Clamp
    SKU: Sum1063763s




Kennedy Scsi Standard Chain Separator
    Kennedy Scsi Standard Chain Separator.

    All Case-harden Construction, Industry Quality Roller And Bush Chain Separator. Designed For Separating Roller And Bush Chains That Have End Softened Pins. To Remove Hardened Pins The Ends Must First Be Removed By Grinding. Simple To Operate: Grip The Chain In The Self-closing Jaws That Also Support The Chain To Prevent Twisting As The Link Pins Are Driven Out. Then Turn The T-handle To Drive The Pins Out. Always Ensure That The Machine Is Switched Off Before Disconnecting Or Connecting A Chain.roller Chain Pin, Roller And Bush Assembly.bush Chain Identical To Roller Chain, But With The Omission Of The Roller.model Scs1 Chain: 9.525 - 15.875mm (0.375ã¢â‚¬ï¿¾ - 0.625ã¢â‚¬ï¿¾) Pitch, To Bs & Ansi Standard.model Lcs2 Chain: 19.05 - 31.75mm (0.75 - 1.25ã¢â‚¬ï¿¾) Pitch, To Bs Standard.chain: 19.05 - 25.40mm (0.75 - 1.00ã¢â‚¬ï¿¾) Pitch, To Ansi Standard.



    Manufacturer: Kennedy
    ID: Crken5881010k
    Category: Hand Tools , gt, Engineers Tools , gt, Toolroom , amp, Maintenance , gt, Chain Separators
    SKU: Ken5881010k




Moldex 2495-ffp2d 1-strap Dust/mist/fume Mask/valve (20)
    Moldex 2495-ffp2d 1-strap Dust/mist/fume Mask/valve (20).

    2495one Strap Makes The Mask Easy To Put On And Take Off, Fitted With A Head Harness As Part Of The Strap Ensures Correct Positioning And Increases Comfort. Foam Nose Piece Increases Comfort And Fit And A Ventex Valve Helps Reduce Moisture And Heat Build-up Within Mask. Reduced Breathing Resistance Due To Passing The Dolomite Test. For Protection Against Toxic Dusts, Water And Oil-based Mists And Fumes. Standard: En149:2001 + A1:2009 Ffp2 Nr D. Adjustable Strap. Nose Clip Included.



    Manufacturer: Moldex
    ID: 249501
    Category: Personal Protection , amp, Clothing , gt, Respiratory Protection , gt, Respirators - Disposable Masks
    SKU: Mdx9591237x




Lincoln Replacement Castors For Metal Or Plastic Kick Stools
    Lincoln Replacement Castors For Metal Or Plastic Kick Stools.

    Lincoln Lincoln Replacement Castors For Metal Or Plastic Kick Stools Site Safety > Ladders, Steps & Access Equipment > Kick Stools



    Manufacturer: Lincoln
    ID: Lnc-811-0390k
    Category: Site Safety , gt, Ladders, Steps , amp, Access Equipment , gt, Kick Stools
    SKU: Lnc8110390k




Deluxe Fixed Arms (pair)
    Deluxe Fixed Arms (pair).

    Pair Of Spare Chair Arms For High Back Operator's Chairs.suits: Tcs-811-8300ktcs-811-8302ktcs-811-8304k



    ID: Ac1002
    Category: Furniture , gt, Office Accessories , gt, Chair Accessories
    SKU: Tcs8119802k




Hitachi Power Tools Cr18dsl/w4 18v Reciprocating Saw Body Only
    Hitachi Power Tools Cr18dsl/w4 18v Reciprocating Saw Body Only.

    High Specification Reciprocating Saw With High Capacity 5.0ah Li-ion Batteries.double The Performance Of A 3.0ah Li-ion Battery Thanks To Advancements In Battery Technology.multiplex Protection Circuit For Maximum Battery Life.same Size And Weight As 3.0ah/4.0ah Li-ion Battery.soft Grip Handle For Extra Comfort.variable Speed Trigger.tool Free Blade Changing System.blade Can Be Fitted Facing Up Or Down For Extra Versatility.adjustable Front Shoe To Maximise Blade Life.safety Lock-off Button.external Brush Caps.standard Accessories: Uc18yrsl, Blade, Wrench, Carrying Case.batteries:cr18dsl/jj: 2x5.0ahcr18dsl/jj1: 1x5.0ahcr18dsl/l4: Naked



    Manufacturer: Hitachi Power Tools
    ID: Cr18dsl/w4
    Category: Power Tools , gt, Cordless Power Tools , gt, Cordless Reciprocating Saws
    SKU: Hit2740362t




Swisstech 6-16mm Cutter Set In Wooden Box
    Swisstech 6-16mm Cutter Set In Wooden Box.

    Shanks To Din1835b. Cutting Diameters To Js12 & E8. Supplie In A Wooden Case.contents: (1 Of Each).series 01: 2 Flute Slot Drills. 6, 10, 12 & 16mm Diameter.series 06: 3 Flute Ticn Coated Slot Drills. 6, 10, 12 & 16mm Diameter.series 09: 4 Flute End Mills. 6, 10, 12 & 16mm Diameter.series 13: 3 Flute 50 High Helix End Mills. 6, 10, 12 & 16mm Diameter.series 25: 4 Flute Coarse & Fine Pitch Ticn Coated Ripper Cutters. 6, 10, 12 & 16mm Diameter.



    Manufacturer: Swisstech
    ID: Crswt1639950a
    Category: Cutting Tools , gt, Milling , gt, End Mills , gt, End Mill Cutter Sets
    SKU: Swt1639950a




Avon 75mmx50m Cross Weave  Filament Tape
    Avon 75mmx50m Cross Weave Filament Tape.

    Clear Polypropylene Film, Reinforced With Glass Fibre Filaments Which Are Cross-woven Into An Aggressive High Shear Adhesive To Give High Strength. Used For Heavy Reinforcement, High Security Sealing. Adheres To All Paper, Card And Plastics.all Prices Are Per Roll. Images Are For Illustration Purposes Only



    Manufacturer: Avon
    ID: Avon115275x50
    Category: Adhesives , amp, Sealants , gt, Adhesive Tapes , gt, Packaging Tapes
    SKU: Avn9810040k




Bosch Gco 2000 Cut Off Saw 110v
    Bosch Gco 2000 Cut Off Saw 110v.

    Gco 2000soft Startpower Input: 2,000w.no Load Speed: 3,500rpm. Cutting Disc Dia: 355mm.cutting Disc Bore: 25.4mm.cutting Capacities: Rectangle 180 X 85mm, Square 110 X 110mm, L-profile 130 X 130mm.weight: 18kg.



    Manufacturer: Bosch
    ID: 0601b17260
    Category: Power Tools , gt, Corded Power Tools , gt, Saws , gt, Cut Off Saws
    SKU: Bch2666550e




116 Fluke True Rms Multimeter
    116 Fluke True Rms Multimeter.

    116compact True-rms Meter For Hvac Troubleshooting. It Has Everything Needed In An Hvac Meter Including Temperature And Microamp Measurements To Quickly Troubleshoot Problems With Hvac Equipment And Flame Sensors.voltage Max: 600v Ac/dc. Current Max: 600ma Ac/dc. Capacitance Max: 500mf. Temp. Range: -40ã‚â°c - 400ã‚â°c. Continuity: 600w. Diode Test: 2v. Safety Rating: Cat Iii 600v.



    Manufacturer: Fluke
    ID: 2583601
    Category: Measuringg , amp, Test Equipment , gt, Electrical Measuring , amp, Testing Equipment , gt, Multimeters
    SKU: Flu5161126c




Anglo Anti-slip Step Cover 600x345mm Yellow
    Anglo Anti-slip Step Cover 600x345mm Yellow.

    Highly Versatile, Heavy Duty Preformed Step Covers With Nosing, Landing Covers With Nosing And Sheeting. Provides A Corrosion-resistant Surface For Damaged Or Worn Areas. Will Tolerate Heavy Wear. Easy To Apply - Can Be Glued Or Screw Fixed. Black Tread With 55mm High Visibility Nosing For Landing Covers And Step Covers. Excellent Slip Resistance Even In Wet Conditions. Ideal For Use Inside And Out. Step Cover Sizes Available: 600mm X 220mm And 1000mm X 220mm In Black With Yellow 55mm Nosing.



    Manufacturer: Anglo
    ID: Axassc6
    Category: Materials , amp, Maintenance , gt, Maintenance , amp, Repair , gt, Floor Maintenance , amp, Safety Products
    SKU: Ang7070830r




Dewalt Dwp849x-lx 180mm 1250w V/ Speed Polisher 110v
    Dewalt Dwp849x-lx 180mm 1250w V/ Speed Polisher 110v.

    Dwp849x - Lxvariable Two Finger Speed Trigger Allows The User To Control The Speed Of The Unit By Adjusting The Force Applied To The Switch. Large Variable Speed Dial Allows The User To Easily Change Their Speed To Suit Specific Applications. Large Spindle Lock Makes Accessory Changing Easy, "pop Off" Brushes Protect The Armature From Damage Due To Worn Brushes. Rubber Over Moulded Gear Case Allows The User To Grip The Gear Case For Greater Comfort.supplied With 180mm Hook&loop Packing Pad And Wool Bonnet, Bail Side Handle And A Horizontal Side Handle.power Input: 1250 Wattsno Load Speed: 0-600/3500rpmmax. Disc Diameter: 150 & 180 & 230mmspindle Thread: M14length X Height: 480mm X 135mm



    Manufacturer: Dewalt
    ID: Dwp849x-lx
    Category: Power Tools , gt, Corded Power Tools , gt, Polishers
    SKU: Dew2728415k




Dmt Dcsfh Diafold Conical File
    Dmt Dcsfh Diafold Conical File.

    Diafold Conical File 102mm Long. 3.2 To 9.5mm Tapered For Honing Curved Surfaces, Serrated Knives Etc.



    Manufacturer: Dmt
    ID: Dcsfh
    Category: Abrasives , gt, Finishing , amp, Polishing , gt, Oilstones , amp, Whetstones
    SKU: Dmt2563010a






Brake | Steering | Auto | Ignition | Belts | Engine | Fuel | Vehicle

Copyright © 2024 MotorHolder.com All rights reserved.
With any using link to MotorHolder.com strongly required.