|
|
Kennedy Small Parts Organiser 10- Compartments.
Made From Tough Polypropylene. This Service Case Has 10 Equal Compartments Measuring 80 X 40 X 30mm Deep. The Lid Has Positive Catches And Is Semi-transparent To View Its Contents.
Manufacturer: Kennedy
ID: Ken-593-6040k
Category: Storage , amp, Handling , gt, Storage , gt, Tool Storage , gt, Service Cases , amp, Organisers
SKU: Ken5936040k
|
|
|
Identibadge Lanyards Breakaway Blue 5 00mm (pk-10).
Flat Woven Fabric Lanyards With Metal Dog Clip And Black Plastic Health & Safety Breakaway Feature. 10mm Wide, 500mm From End To End Hanging Length. Lanyards Are Also Available Printed With Your Company Name And Logo. Enquire For Further Details.
Manufacturer: Identibadge
ID: Lan3b10
Category: Office Supplies , amp, Stationery , gt, Conference , amp, Presentation , gt, Visitor Badges
SKU: Idb8200330k
|
|
|
Yamaloy Ccmt 09t304-pm Insert Grade Qx500.
Ccmt Turning Inserts 80ã‚â° Rhombic Insertinsert Grade Qx500(iso P10-p25) Cerment. For High Speed Finishing And Light Cutting. Will Remain A High Class Surface Finish. Mainly Used On Steels And Can Be Applied To Finish Some Stainless Steels And Cast Irons.chip Breaker: Pm. Application: Med Cut.
Manufacturer: Yamaloy
ID: 1-03-014558
Category: Cutting Tools , gt, Turning , gt, Iso Turning Inserts
SKU: Yml1200403a
|
|
|
Kobe Red Line Vcb-2-32a Flexible Hose Assembly.
Suitable For Use With Kobe Models 310 And 523i Vacuum Cleaners. The Accessories Illustrated Here Are Supplied As Standard With Models 310 And 523i In Addition To The Flexible Hose Which Is Not Illustrated Here But Can Be Seen In The Pictures (left).
Manufacturer: Kobe Red Line
ID: Vcb-2-32a
Category: Cleaning , amp, Hygiene , gt, Cleaners , amp, Washers , gt, Vacuum Cleaner Accessories
SKU: Kbe2805110k
|
|
|
Renold 06b-1s26 Bs Din8187 Blue Box Connecting Link.
Simplex Chain Connecting Linkrenold Blue Box Chain With Their Unique Control Over Pin/bush Contact, Ensures That Little Initial Connected Series Adjustment Is Therefore Required. Renold Blue Box Roller Chain Is Highly Fatigue Resistant With Breaking Loads Exceed The Minimum Requirements Of The International Standards. The Specification Of Renold Chain Has Evolved From Decades Of Design, Test And Application Experience Which Delivers Product Reliability And Consistency. Other Sizes From 5/16ã¢â‚¬ï¿¾ To 2ã¢â‚¬ï¿¾ Pitch Are Also Available Please Ask For Details. Conforms To: Din8187/is606
Manufacturer: Renold
ID: 06b-1s26b50
Category: Bearings , amp, Transmissions , gt, Roller Chains , gt, Simplex Chain
SKU: Ren6901896g
|
|
|
Solent Spill Control Msd42 2-part Modular Dispensing Unit.
Engineered To Provide Compliance In A Variety Of Locations, Wherever Spill Response Is Required, Providing An Effective Dispensing Solution For Pads And Rolls.ã¢â‚¬â¢ Avoids The Need To Use Stock From Spill Kits (designed For Emergencies) To Satisfy Every Day Requirementsã¢â‚¬â¢ Versatile Modular System - Optional Lockable Cabinetã¢â‚¬â¢ Spindle Location Can Be Adjusted To Suit Varying Roll Sizesã¢â‚¬â¢ Can Be Free-standing Or Wall Mountedã¢â‚¬â¢ Powder-coated Steel Constructionã¢â‚¬â¢ Can Also Be Used With 20 Litre Spill Tray
Manufacturer: Solent Spill Control
ID: Depot-42
Category: Site Safety , gt, Spill Control , gt, Spill Kits
SKU: Sol7428330h
|
|
|
Kennedy 3-point Mag Medium Duty Fitment.
All Main Columns Are Threaded M8 X 1.25mm And Are Interchangeable With Kennedy, Oxford, Mitutoyo Etc. Base Units Except Mini-mag (m6 X 1mm) Also Suitable For Incorporating Into Special Fixtures Or Threaded Pot Magnets.medium Duty Fitment - 3 Pointfitted As Standard To Ken- 333-2110k.3 Point Adjustable Colunm: 15 X 280mm Max.thrreaded: M8 X 1.25mm.clamp Hole: 8mm.
Manufacturer: Kennedy
ID: Ken3332480k
Category: Measuring , amp, Test Equipment , gt, Test Gauges , amp, Accessories , gt, Instrument Stands , gt, Magnetic Stand Fitments
SKU: Ken3332480k
|
|
|
3m 09743-hi-ur 75x6mm L/cut Unitised Wheel.
Designed For Use On Portable Tools And Featuring The Convenient Roloc+ Twist-on, Twist-off Fixing System.roloc+ Cut & Polish Unitised Wheelcompressed 'level Cut' Web Designed For Blending And Polishing, Giving An Excellent Fine Finish. Use On Moulds And Dies To Restore Surface Finish Without Changing The Surface Geometry.
ID: 7000078001
Category: Abrasives , gt, Finishing , amp, Polishing , gt, Surface Conditioning Products
SKU: Mmm2457743m
|
|
|
Solent Lubricants Plus Fsasp Anti Seize Paste 500gm.
Formulated For Use On Assemblies In Difficult Areas Where Fretting Corrosion And Corrosion Induced By Wet Environments Occur. It Can Also Be Used To Lubricate Slow Moving Slides And Pivot Pins. Resistant To Hot, Cold And Salt Water It Can Be Used Across A Wide Temperature Range Where The Solid Lubricate Including Ptfe Gives Excellent Dry Lubrication And Forms A Barrier Between All Surfaces. Non-toxic, It Complies With Fda Regulations And Is Ins H1 Registered. Size: 500g.
Manufacturer: Solent Lubricants Plus
ID: Sol-740-6720b
Category: Lubricants , amp, Chemicals , gt, Food Industry Lubricants , amp, Greases , gt, Food Industry Greases
SKU: Sol7406720b
|
|
|
Kennedy-pro Sliding "t" Handle 1/4" Sq Dr.
Manufactured From High Quality Chrome Vanadium With A Fully Polished Finish. The Sliding Bar Will Give Many Options For Leverage Within A Given Space.
Manufacturer: Kennedy-pro
ID: 0161v2a105
Category: Hand Tools , gt, Sockets , hand, , gt, 1, 4, quot, Square Drive , gt, Accessories 1, 4, quot, Sd
SKU: Ken5824040k
|
|
|
Kennedy Pressure Testing Pump 60 Bar.
This Robust Piece Of Equipment Has A 10ltr Powder Coated Tank And Comes With A 1.5m 1/2ã¢â‚¬ï¿¾ Reinforced Hose And A Pressure Gauge Graduated In Bar And Psi.
Manufacturer: Kennedy
ID: Crken5888700k
Category: Hand Tools , gt, Plumbing , amp, Pipe Tools , gt, Pipe Testing , amp, Inspection
SKU: Ken5888700k
|
|
|
Smc Kq2k06-m5a 45deg Male Elbow 6 To M5.
Kq2k Series45ã‚â° Elbow Fitting With External Hexagon Head, 360ã‚â° Pivotable. To Pipe At A 45ã‚â° Angle On A Female Thread.colour: White.
Manufacturer: Smc
ID: Kq2k06-m5a
Category: Fluid Power , gt, Pneumatic Fittings , gt, Elbow Connectors
SKU: Smb2915798w
|
|
|
Impacto Protective Products Inc Mat5050 Kneeling Mat C/w Handle 14"x21.
Designed For Severe Kneeling Conditions In Cold/hard, Steel, Concrete, Grating, Gravel, Wet Surfaces, Dirt/mud.helps To Reduce Knee Trauma And Low Back Pain. Provides Comfortable Support And Cushioning.does Not Compress Set. Does Not Absorb Liquids. Silicone-free, Fully Washable. Impervious To Petroleum Products.resilient Closed Cell Pvc 1" Foam Rubber With Built-in Handle. Self Extinguishing And Non Conductive. 14" X 21". Used For Sitting Or Kneeling.
Manufacturer: Impacto Protective Products Inc
ID: Crimp9465050a
Category: Personal Protection , amp, Clothing , gt, Knee , amp, Elbow Pads
SKU: Imp9465050a
|
|
|
Iscar Gipa-3.00-0.20 Insert Grade Ic20.
Gipa (w=3-6) : Precision Ground Double-ended Inserts, Polished To Avoid Built-up Edge, Used For Machining Aluminum At Medium-to-high Feeds. Ic20 (k10-k20).uncoated Carbide Grade For Grey Cast Iron Over 220hbn, Malleable Cast Iron, Silicon Aluminum, Copper Alloys. Fibre Reinforced Plastics (frp) Phenolic Laminates, Stone, Wood, Stainless Steel And High-temp Resistant Alloys. Suitable For Finishing And Medium Finishing At Medium Speed, Medium Feed And Interrupted Cut Conditions. High Wear Resistance.
Manufacturer: Iscar
ID: 6402113
Category: Cutting Tools , gt, Parting , amp, Grooving , gt, Inserts , amp, Blades , gt, Parting Inserts
SKU: Isc1333968c
|
|
|
Kobe Multi-tool Accessory Kit 53pc.
Fitted Plastic Case Containing 53 Piece Multi-tool Kit For A Range Of Surface Cleaning And Polishing Tasks.contents: 1x Silicon Carbide Sanding Wheel With 1/8" Diameter Shank,1x Aluminium Oxide Sanding Wheel With 1/8" Diameter Shank,1x Holder 1/4" X 1/2",1x Holder 1/2" X 1/2",1x Mandrel Shank Dia: 1/8",1x Nylon End Brush,1x Wire Cup Brush, 2x Grinding Wheel 1/8" X 13/16",30x Cutting Disc 1/32" X 15/16",6x Sanding Band 1/2" X 1/2", 8x Sanding Band 1/4" X 1/2".
Manufacturer: Kobe
ID: Kbe-280-3380k
Category: Power Tools , gt, Corded Power Tools , gt, Multi-tools , amp, Engravers
SKU: Kbe2803380k
|
|
|
3m 847 Adhesive 1ltr.
847 Gasket Adhesive Medium Viscosity Grade Adhesive For Many Brush Or Flow Applications. Quick Drying, Excellent Resistance To May Fuels And Oils. Bonds Leather, Nitrile Rubber, Most Plastics And Gasketing Materials To A Variety Of Substrates. It Can Also Be Heat Cured To Obtain Improved Physical Properties.
ID: 7000079819
Category: Adhesives , amp, Sealants , gt, Structural Adhesives
SKU: Mmm7050847g
|
|
|
Workshop T/s Drill Set In Plastic Tube 16-pce.
Useful Miscellaneous Taper Shank Drill Set, In Plastic Tube. Contains A Selection Of Small Diameter Metric And Inch Drills For General Workshop Use.n.b. Item Contents May Vary.
Manufacturer: Workshop
ID: Crpro0259000a
Category: Cutting Tools , gt, Hole Making , gt, Drill Sets , gt, Taper Shank
SKU: Pro0259000a
|
|
|
Uvex 9178-881 Superfit Optidur Nc Silver Mirror Specs.
Lightweight Safety Spectacle With Hinged Side Arms. Extremely Thin Wrap-around Lens. Aerodynamic Lenses Are Angled Forward To Provide Ventilation. Uvex Permanent Lens Coating Technology: Anti-fog On The Inside And Scratch Resistant On The Outside (9178.265)
Manufacturer: Uvex
ID: 9178-881
Category: Personal Protection , amp, Clothing , gt, Eye Protection , gt, Spectacles , amp, Glasses
SKU: Uvx9602762m
|
|
|
Workshop 1.1/2" X 1.3/4" Trim Hock Y Stick Radiator Brush.
Designed To Reach Inaccessible Places Like Behind Radiators, Eaves Above Door Jams, Baseboards And Ceiling Line. Chisel Trim Flat Sash. With 'hockey Stick' Handle.brush Width: 1,1/2".brush Height: 1,3/4".
Manufacturer: Workshop
ID: 504.100.100
Category: Hand Tools , gt, Decorators , gt, Brushes
SKU: Ctl9070302m
|
|
|
Dewalt D26441-lx 230w 1/4 Sheetpalm Sander 110v.
D26441 230w Motor Sands At 14,000 Orbits Per Minute, Providing A Superior Finish. Hook And Loop Platen Allows Faster Paper Change. Paper Clamps Provided For Conventional Abrasives. Supplied With Sanding Sheets, Paper Punch, Dust Bag With Built-in Extractor Connection.power Input: 230w.orbits Per Minute: 14,000/min.orbit Size: 1.4mm. Paper Size: 140 X 115mm. Pad Size: 108 X 115mm. Overall Length: 130mm.
Manufacturer: Dewalt
ID: D26441-lx
Category: Power Tools , gt, Corded Power Tools , gt, Orbital Sanders
SKU: Dew2722379k
|
|
|
3m Hot Melt Touch Control Adhesive Applicator Tc.
3m Polygun Hot/low Melt Adhesive Applicators And Accessories Are Ideal For Manual Packaging And Product Assembly Applications.
ID: 7000028618
Category: Adhesives , amp, Sealants , gt, Adhesive Accessories
SKU: Mmm7057870k
|
|
|
Dewalt Dt9520-qz 6.50mmx160mm Sd S-plus Drill Bit.
This 6.5 X 160mm Drill Bit From Dewalt Has Been Manufactured To A Very High Standard Courtesy Of The Superior Carbide Grade For Long Life And Greater Durability, While The Hardened Body Offers Extra Strength And Reduced Breakage. Whether You Are A Profressional Tradesman Or Diy Enthusiast, The Drill Bit Delivers Speed And Endurance, Along With An Optimised Flute Design For Efficient Debris Removal. New Tip Design Ensures Better Bit Penetration, Longer Life, Faster Drilling And Greater Durability! Weight: 58g Ãëœ: 6.5mm Length: 160mm
Manufacturer: Dewalt
ID: Dt9520-qz
Category: Cutting Tools , gt, Hole Making , gt, Masonry Drill Bits , gt, Sds Shank Drill Bits
SKU: Dew2808523a
|
|
|
Sif Ceramic Back Rounded Groove 1/8 Segmented Circle.
Ceramic Backing Strips Pre-aligned On A Self-adhesive Aluminium Backing Tape.these Backing Material Strips Enables Welding To Be Carried Out From A Single Side With Full Penetration And Reduce The Need To Grind Out And Re-weld A Root From The Reverse Side. The Self-adhesive Backing Tape Adheres To Every Weldable Material. The Strips Are Available In Different Configurations For Various Heavy Gauge Mig/gmaw And Mma/smaw Applications Such As Structural Steel Fabrication, Bridge-building, Pressure Vessel Manufacture, Shipbuilding And Pipeline Seam Welding. Each Strip Is Cut To 600mm (60cm) Length And Each Profile Is Supplied In Quantities Of 20 Strips Per Box. The 1/8 Segmented Circle Profile Is Provided In 8 Strips Per Circle (10 Circles Per Box).benefits:ã¢â”￾reduced Need For Welding From The Reverse Side;ã¢â”￾usable With Every Weldable Metal To Reduce Oxidation And Prevent Hydrogen Inclusion;ã¢â”￾improved Efficiency By Decreasing The Need Of Re-work
Manufacturer: Sif
ID: Pv290806715sf
Category: Welding, Brazing , amp, Soldering , gt, Mig Welding , gt, Ceramic Backing Material
SKU: Sif8856237f
|
|
|