X100w-lchisel Point. Valve Controlled Quick Drying White Ink. Marks On Almost Any Surfaces. 1300m Writing Distance.x100wbroad Bullet Point Version Of X100w-l. 1200m Writing Distance.

3/4" Simplex - Pilot Borea Full Range Of Sprockets In Both Taper Bore & Pilot Bore Are Available In Simplex, Duplex And Triplex Styles.we Also Carry A Complete Range Of Taper Bore Bushes And Keyway Steels To Suit.ã¢â‚¬â¢ All Sprockets Are Manufactured To Exacting Standards And Specificationã¢â‚¬â¢ Taper Bore Bush Versions Allow For Quick And Simple Installation Without The Need To Machine The Sprocketã¢â‚¬â¢ Boring And Keyway Service Fot Pilot Bore Sprockets Is Available On Requestã¢â‚¬â¢ Cast Iron And Stainless Steel Sprockets Are Also Availableã¢â‚¬â¢ Double Pilot Type Also Available

Deep Epoch Balldiameter Range: 0.6 - 2.0mm.dia. Tolerance: -0/-0.015.shank Size: 4.0mm H5.radius Tolerance: +/-0.005.

High Capacity Yet Compact Dispenser For Medium To High Traffic Washrooms. A Spare Roll Can Always Be Kept In Place. High Paper Capacity - Each Dispenser Holds Up To 270m Of Paper. Lockable. The Empty Core Is Retained In The Dispenser Ensuring A Tidy Washroom. We Offer Three Qualities Of Paper To Choose From, Each Designed To Suit Your Specific Requirements.dimensions (w X H X D): 184 X 344 X 140mm.

Precision Swivel Ball That Can Be Used Either As A Contact Bolt Or Rest Pad. As Contact Pads These Swivel Ball Units Are Ideal For Evenly Distributing Clamping Pressure On Sloped Or Uneven Surfaces.material: Body - Medium Carbon Steel. Ball - Through Hardened Steel En 31.hardness: Bolt - Hrc 35.ball - Hrc 62.surface Finish: Black Oxide.

Unc - Class 2b Tolerancemade From The Finest Quality Steel And Are Thoroughly Hardened, Stabilised And Thread Ground Under Strict Quality Control Procedures Ensuring A High Quality Product Andã‚⭠Ââ­optimum Wear Life.double-ended Go & No Go

Two Flute Staggered Tooth Bits Cutter For Deep Mortising And Grooving. Staggered Cutting Edges Give Good Chip Clearance Enhancing Quality Of Cut.

Elbow Connector To Male Taperquick And Simple Tube Insertion. Compact Lightweight Design With A Well Proven Tube Retaining System. Tapered Threads Have A Re-usable Thread Seal And Parallel Threads Have A Rubber Washer. Main Body Manufactured From Nickel Plated Brass, Acetal Resin, Pbt With A Stainless Steel Retaining Ring, Nitrile Tube Seal And Acetal Resin Tube Release Collar.pressure Range: -0.9bar Min To +10bar Max. Temp Range: -20ã‚â°c Min To +70ã‚â°c Max. Tube Suitability: Nylon, Polyurethane.

2610three Lighting Levels. Adjustable Strap Fits Securely On Your Head, While The Rubber Strap Grips Tightly To Hard Hats. Ideal For Reading Maps Or For Work. Certified To Atex Safe For Use In Hazardous Zone 1 (category 2) Locations. Uses 3x Aaa Batteries (included).

Small Block Plane Suitable Mainly For Model Makers 25ã‚â° Cutter Angle. 35mm Cutter Width.block Planessuitable For End Grain Work Or Any Application Where Single Handed Operation Is Required. The Plane Bodies Are Manufactured From Fine Grey Iron Ground And Polished To A High Quality Finish. The Cutter Is Set At A Low Angle This Ensures Vibration Is Kept To A Minimum Producing Good Results When Used On Plastic Laminates And Other Man Made Materials. All Have Adjustable Cutter Alignment And Depth Of Cut.

Ideal For Separating Spot-welded Panels During Repairs.stainless Steel Coated Chrome Vanadium With Through Tang Shafts Allow Use With Hammers. Dual Material Soft Grip Handles For Comfort And Control. Includes 90ã‚â°, Curved And Straight Seam Splitters. Cushioned Handle Absorbs Any Shock From Hammer Blows. Made From Super Tough Alloy Steel.

American Pattern, Bench Mounting Steel Vice With Anvil Suitable For Workshop, Garage And Machine-shop Use. Fixed Base Directly Mounts Onto Work Bench. Cast Iron Body With Steel Jaws And A Cross Drilled Threaded Handle With Adjustable T-bar For Extra Leverage.

Replacement Square Drive Adaptors To Suit Ratchet Combination Spanner Set (ken-582-3980k).

Loctite Flexible Gasket Fast Cure B5205 - Red (300ml). Medium Strength. High Resistance To Solvents. Resists High Pressure When Fully Cures. Service Range: -50ã‚â°c - +150ã‚â°c. Tensile Sheer Strength: 3 N/mmã‚â³. Max Gap: 0.125mm

Developed To Surpass The Competitors In Wattage, No Load Speed And Impacts Per Minute. Cylinder-shaped Motor Housing And Aluminum Gear Housing Cover Provide High Performance.

Uhu Solvent-free Stick , The Convenient, Clean And Solvent-free Glue Stick With A Unique Screw Cap To Protect From Drying Out. Fast, Durable And Economical. Spreads Easily And Sticks Immediately. Washes Out Easily With Cold Water. For Use At Home, At School And In The Office.size: 21g.

Compact Red Polypropylene Body Allows Access Into Awkward Areas. The Blade Is Curved For Increased Stock Removal, Works On The Pull Stroke. Supplied Complete With Fitted Blade Standard Cut.

Rubberised Barrel And Ribbed Finger Grips. Ball Point For Skip And Blob Free Performance. Barrel Colour Matches Colour Of Ink

Countersink T With A Diameter 50mm And Larger Are Made With A Driving Lip. These Sizes Should Be Used In The Appropriate Type M Holder.

12ã¢â‚¬ï¿¾ Sharpening Steelkeep Your Knives Razor Sharp With A Sharpening Steel. Supplied With Hanging Ring.most Granton Knives Are Made From Fully Hardened And Tempered Stainless Steel And Are Easy To Clean. Both The Black And Coloured Handles Are Insert-moulded From Polypropylene Co-polymer To Withstand Sterilising And Dishwasher Use And Do Not Present The Potential Health Hazards That Are Frequently Associated With Other Knives. Our Blades Are Laser Tested And Made To Bs En Iso 8442-1:1998 From Hot Sheffield Forgings Or Fully Hardened And Tempered Stainless Steel, Double Taper Ground And Hand Finished.cross Contamination - The Granton Colourgriptm System All Granton Knives Are Available With A Choice Of Red, Blue, Yellow, Green, Brown, White Or Black Handles. This System Helps Prevent Cross Contamination By Assigning Coloured Handles To Particular Work Areas. This Table Shows How Coloured Handles Can Be Assigned To Particular Work Areas. This Offers Instant Visual Identification Of Potential Cross Contamination Hazards.the Patented Granton Edgethe Patented Granton Edge Can Be Found In Every Place Where A Perfect Cutting Edge Is Appreciated. First Introduced Over 80 Years Ago, The Secret Of Its Success Lies In The Precision With Which The Scallops Are Ground On Alternate Sides Of The Blade, Giving The Keenness Of A Hollow Ground Razor Coupled With The Strength Of An Ordinary Knife. In Addition, The Patented Ground Scallops Create Air Cushions Which Allow For Smooth And Fast Cutting. Granton Knives Only Require To Be Steeled Occasionally In The Normal Way To Retain A Perfect Cutting Edge.

Features Ahigh Performance Audio System - Dab+/fm Tuner With Digital Processor Delivers Highest Reception Accuracy And Signal Clarity. Dab+ Gives Best Sound Quality And Additional Information Like: Song, Artist And Accurate Timedual Speaker With Passive Radiators Deliver Loud, Clear Sound With Deep, Accurate Bass. Customisable Equalizer For Enhanced Sound Quality And 10-station Preset. Shock Absorbing End Caps And Metal Speaker Grills Protect The Radio From Drops, Water And Debris On Site. Integrated Handles Allow For Easy Transport And Storage. Powered By Milwaukee M18 Batteries Or Ac Outlet. Up To 12 Hours Of Runtime With An M18 Redlithium-ion 5.0 Ah Battery Packweather Sealed Device Compartment To Protect Abd Charge Mobile Devices. Supplied With Auxiliary Input Cord The Protected 2.1 A Usb Power Outlet Charges Electronic Devices In Both Ac And Dc Mode,. Milwaukee Batteries Sold Separately. Body Only, No Batteries Or Charger Included.

Deep Groove Metric Ball Bearings - Shieldedshielded (2z) Bearings Are Fitted With Two Metal Dust Shields To Prevent The Ingress Of Dirt And Foreign Matter. 2rz Bearings Are 2z Bearings Fitted With Two Low Friction Seals. Deep Groove Ball Bearings Are Versatile And Robust In Operation, They Also Require Little Maintenance. Deep Groove Ball Bearings Are The Most Widely Used Bearing Type Due To Their Simple Design And Suitability For High Speeds.features And Benefitsprimarily Intended For Applications Where The Bearing Inner Ring Rotatesif The Outer Ring Rotates There Is A Danger That Grease May Be Lost From The Bearing At High Speedsboth Standard And C3 Clearance Available

Super-grip Criss-crossheavyweight Knitted Cotton Gloves With High Grip Pvc Lattice And Elasticated Wrists.added Surface To Provide Extra Grip During Application.bs En388 3.1.4.3.cat Ii

Im65a F16a Distinctive Angled Brad Nailer Designed Specifically For Working In Tight Spaces And Corners. Benefits Are A Small, Light Shell, Nail Lockout, Excellent Depth Of Drive Adjuster And Easy Jam Clearance. Lightweight Helps Reduce Operator Fatigue. No-mar Contact With Sight Lines For Accurate Placement And Reduced Damage To Wood. Tool Free Depth Of Drive Adjustment Provides Precise Control Of Brad Depth. Nail Lockout Preventing Blank Firing And Minimises Wood Damage. Rear Load Magazine Easy Brad Loading, Holding Two Strips Of Brads (100 Brads). Ce Marked.power: 30j.brad Range: 32 - 63mm.cycle Rate: 2-3 Brads/sec.maximum Cycle Rate: 1000 Brads/hr 4000 Brads/day.magazine: 100 Brads.fuel Cell Life: Approx 1000.battery: Nicd (1.2ah 6v).fixing Per Charge: Approx 4000.charger 230v: 2hr Max Charge.dimensions: 292 X 267 X 90mm.

Seamless Knitted Glove, Gauge 13. Made From High Performance And High Visible Fibres, Using Techcor Knitting Technology. Palm Fit Coating. Water Based Process Environmentally Friendly Innovative Coating. Silicone-free. Water And Oil Repellent Treatment On Both Liner And Coating. Good Abrasion And Blade Cut Resistance. Heat Resistant Up To 100ã‚â°c.conforms To En388 4332.