Dcmt Turning Inserts55ã‚â° Rhombic Insertinsert Grade 2035(m25-m40)pvd (ti,al)n+tin Coated Grade For Use On Stainless Steel

Zirconium Grade Glass Fibre-backed (non-scratch).high Performance Alternative To Sanding Discs. Have The Advantage Over Depressed Centre Grinding Discs On Light Gauge Sheet Metal Where Surface Finish Is Important. Overlapped Abrasive Strips Slowly Wear Away Revealing Fresh Abrasive, Ensuring The Disc Always Cuts Effectively, Redducing Clogging, Provides Constant Finish Throughout Disc Life. No Backing Pads Needed. Safe To Use At 80m/s On Any Grinder. Tested At 150m/s And Approved By The German Grinding Wheel Authority (dsa). Available In Two Grades And With Two Types Of Backing.100mm Dia X 16mm Bore 15,300 Mos (rpm)115mm Dia X 22mm Bore 13,300 Mos (rpm)125mm Dia X 22mm Bore 12,000 Mos (rpm)180mm Dia X 22mm Bore 8,600 Mos (rpm)

Skater Style 'iconic' Safety Trainer With Steel Midsole, To Prevent Sharp Object Penetration. Ideally Suited To Building Sites And Where Metal Swarf Is Present On Floors. Normally Allows Walking On Hot Surfaces Up To 300ã‚â°c. Sbp Classified.manufactured To En Iso 20345:2011.

A Range Of Stainless Steel Castors For Corrosive Conditions. Popular Nylon Wheeled Stainless Steel Castors Suitable For Washdown.

Produces Burr Free Cuts Without Distortion. Ideal For Body Shop And Sheet Metal Work. Suitable For Use With Kobe Sh120 Rapid Cutting Metal Shear.

With Abs Cups And Pvc Cushions. The Positionable Ear Cups Are Designed To Fit Unnoticeably Beneath The Hard Hat. For Use With Jsp-957 Mark 2 And 3 Helmets. Conform With En352-3: 2002.tested In Accordance With En 24869-1.

Positive Indent (standard)drawn Carbon Steel Nickel-plated Hand Stamps With Chamfered Edges To Prevent Accidental Damage To Workpiece.

North Polarity In Centre Separated From Opposing Pole By A Continuous Slot. Ideally Suited For Gripping Applications. Supplied With M5 X 1 Threaded Bore Fixing Hole And Keeper.*m3 X 0.5

Five Holes In Base To Allow Fixture To Work Surface As A Permanent Clamp. Swivel Foot To Clamp Tapered Workpieces.ã¢â‚¬â¢ Adjustable Jaw Opening.ã¢â‚¬â¢ Ergonomic Design, Comfortable Handling.ã¢â‚¬â¢ No Pinch, Easy Release.ã¢â‚¬â¢ Concave Profile For Better Push-pull.

Velcro Backed File Handle.no Need For Multiple Grades Of Traditional File. Simply Change The Abrasive Strip To Achieve A Different Finish. For Use With The 2920 Strips. Allows General Sanding And Finishing On All Wood And Metal Surfaces.

Dnmg Turning Inserts55ã‚â° Rhombic Inserts Insert Grade Kc850(m25-m45)(p25-p45). A Tri-phase Coating On An Extra Strong, Cobalt-enriched Substrate. For Heavy Cutting Of Low,medium, And High Carbon Steels, As Well As Medium Hardness Alloy And Tool Steels. Excellent Thermal And Mechanical Shock Resistance Makes This Grade Ideally Suited For Difficult Interrupted Cuts.chipbreaker: P, Application - Medium

The Only Sockets You Will Ever Need* Grips Nuts And Bolts Which Are Up To 95% Rounded Off* Will Not Damage New, Worn Or Rusted Nuts And Bolts* Fits A Wide Range Metric, Unc, Unf, Bsw, Bsf And E-torx Sizes* Unique 'double-knurl' For High Grip* Chrome Vanadium Side Drive Socket Sets* Fully Chrome Plated Finish For Easy Cleanmetric Ken-grip Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm. Accessories: Ratchet Handle, Spinner Handle, Sliding T-handle, Flexi-drive 145mm, Universal Joint, Extension Bar 100mm.

A Unique And Stylish Safety Spectacle Combining All The Benefits Of A Wrap Round Design And A Hard Coated Clear Anti-scratch One Piece Lens. The Rebel Offers The Discerning Wearer Total Eye Protection Which Is Light In Weight With Excellent Facial Fit.

High Quality Premium Weight Polo Shirt. Knitted Collar With Rod Design And Well Padded, Taped Neckline For Comfort. Half-moon Yoke At Neck For Increased Strength. Cuffed Sleeves With Matching Rod Designself-coloured Placket, With Matching Pearlised Buttons. Triple Stitched On All Main Seams For Ultimate Strength.fabric: 50% Polyester 50% Cotton, Weight: 220gsm

The Alcohol-free Solution Cleanses And Soothes Cuts And Grazes And Prepares Surrounding Area For Dressing, Ensuring Greater Adhesion. Individual Sachets.

Robust And Lightweight Angled Blocks With Integral Line, Can Be Used Single Handed. Helps Bricks And Blocks To Be Laid Straight. Pack Of 2.90ã‚â° Handle Opening.line Length 30m

Ergonomic Handle Design. Incorporating 'soft Feel' Urethane Handles For Comfort, With Steel Striking Cap For Hammer Blow Protection. Fully Ground And Finished Steel Blade. Friction Welded Bolster For Strength And Durability. Shatterproof Polymer Body Resists Most Solvents. Made From High Quality Ball Bearing Grade Steel. Fully Ground And Finished For Ultimate Sharpness.

Liner:polyethylene/nylon/lycra Knitcoating / Polymer:sponge Nitrile Coatingfeatures Coated Palm Elasticated Cuff Sponge Nitrile Grip Finish Silicone Free High Performance Polyethylene (hppe) Seamless Knit Anatomical Shaperecommended For Work Automotive Glass Recyclingbenefits A Flexible Easy-maintenance Glove Providing Optimal Protection Against Cuts And With Very Good Durability. Protects The Hand From Oils, Hydrocarbons, Grease And Abrasion, With Optimal Long Lasting Grip Breathable Back Of Hand To Reduce Perspiration Surface Provides The Best Grip, Even In Oily Circumstances No Irritation By Seams In Contact With The Skin Designed For Easy Movement And Continuous Wear Great Freedom Of Movement For The Wrist

Ideal For Use In Automotive, Glazing And Areas With High Cut Risks. Lightweight 13 Gauge Seamless Knitted Glove With Rough Nigrile Coating. Made From High Performance Fibre, Using Techcor Knitting Technology. Very Good Grip Proerties, Especially Of Slippery Oily Parts, Due To Nitrile Coating. Flexible And Comfortable. 3/4 Dip Coated.

Side Lever Olgh/cvsupplied With 150mm Steel Delivery Tube And A Hydraulic Connector With Check Valve For High Pressure. Diameter: 56mm.overall Length: 365mm.

Dual Action Odour Control Mechanism. A Highly Effective Activated Charcoal Layer Absorbs Foot Odour. A Proven Anti-bacterial Agent Targets And Inhibits Bacteria. Perforated Cushioning Foam Alsoh Elps To Keep Your Feet Fresh, Dry And Comfortable. Hand Washable For Re-use.

Hm90 Fal-16 Face Mills Used For Machining Aluminum, With Hm90 Apcr 1605... Helialu Inserts. Designation: Hm90 Fal-d050-22-16.

Drills Up To 4 X Diameter. Point Angle: 130. Manufactured To Din 338.

Comprehensive Screwdriving Set That Includes A Range Of Pozidrive, Phillips, Slotted & Torx? Bits. Also Included Is A Magnetic Bit Holder And Extending 'finder-driver' For Precise And Accurate Screwdriving.

86 X 86mmedge Is A Range Of Wiring Devices That Combine Function And Style. The Products Are Very Slim, With Matching Flat Head Screws Throughout. Available In Range Of Finishes, Edge Is The Choice In Modern, Contemporary Or Traditional Interiors Where Style And Detail Are The Desired Effect.fixing Centres: 60.3mm.