Iso Metric - Self-colourmetric Thread Din931.grade 10.9.

Cast Iron Housings.images Are For Illustration Purposes Only.

Gloss Finish Polypropylene, Rounded Sides For Easy Removal Of Small Items. Six Compartments Ideal For Pens, Pencils, Scissors, Erasers Etc. Overall Height: 135mm.colours: Black, Blue Or Red.

(also Suitable For All Cartridge Resin Systems)rawlplug Mild Steel Threaded Rod And Chisel Point Resin Anchor Stud, Zinc Plated. Ideal Use With Resin Capsules And Pump In Resin. Supplied With Stud, Nut, Washer And One Hexagon Driver Per Box.

Ic354 (p20 - P40, M10 - M30). Pvd Coated For Semi-roughing And Interrupted Cutting Medium Speed, High Feed. Suitable For Use On Carbon, Alloy And Stainless Steels.

The Ultimate Competitor In Bi-metal Band Saw Blades, Providing A Universal Solution With Optimum Efficiency In Large Production Cutting Operations.features: Hardened Spring Tempered Back. Ground Teeth With Positive Tooth Angles. Precision Set Teeth. Thin Kerf Available.benefits: Longer Life And Faster Cutting With Less Feed. High Production Rates. Can Be Re-sharpened. Increased Yields.applications: High Production Cutting. Full Range Of Steels From Mild To Stainless Up To 45hrc. Nickel Based And Non-ferrous Alloys. Grade Lumber, Re-saws, Pallet Manufacturing.

Dpb500 - Bench Pillar Drill - Industry Standard Morse Taper Specification Pillar Drills, Suitable For Workshop And Light Industrial Use With A Tilting Rise And Fall Work Table, User Friendly Depth Gauge, Telescopic Chuck Guard, Integral Bit Drawer And Laser Beam Target Guide For Quick Positioning Of Repeat Work.more Versatile Than Its Smaller Stable Mate. A 500w Motor Provides More Power To Drill Holes Up To 16mm With 12 Speeds For Increased Performance When Drilling On Either The Table Or Base.spindle Taper: Mt2. Chuck: 16mm.drill Capacity: 16mm.spindle Travel: 65mm. Speeds: 12. Speed Range: 425 - 2545rpm.max Distance - Chuck/table: 355mm.max Distance - Chuck/base: 465mm.max Distance - Spindle To Column: 126mm.column Diameter: 60mm. Table Size: 200 X 200mm.c/w Side Plates: 200 X 340mm.base Size: 380 X 250mm.

Inch Sizesfor Setting External Micrometers, Calipers Etc. To Zero, Providing Accurate Repeatability Of Measurements. Flat, Lapped Measuring Ends With Fitted Heat Insulation Block. Manufactured To Bs 870.

Minor Typecan Indicate Torque In Two Ways - Measures And Displays Torque As It Is Applied, Or Measures And Displays The Maximum Torque Used, After It Has Been Applied. Ideal For The Electronics, Electrical And Domestic Appliance Industries. Stainless Steel Shafts Coloured Aluminium Handles And Scaled Nylon Dials. 1/4ã¢â‚¬ï¿¾ Hex Drive. Dual Scale. Manufactured To Iso 6789 : 2003. (accuracy +/- 6% Of Reading).

To Enable Fast Installation Or Removal Of Piston Rings. A Self-adjusting Spring Tensioned Mechanism Manufactured From Nickel-plated Steel With Pvc Handles For Extra Grip.capacity: 50 - 100mm (2" - 4")

Chrome Vanadium Steel Blades With Magnetic Tips. Fitted With A Unique Dual Grip Triangular Handle Which Has Been Designed For Improved User Comfort, Allowing More Torque To Be Applied. Manufactured With Convenient Hanging Hole In The Handle For Storage.8-piece Set Contents (mm):crosspoint: No.1 X 75, No.2 X 100.pz: No.2 X 100.flared: 6.3 Stubby, 6.3 X 100, 8.0 X 200.parallel: 5.0 X 75, 5.0 X 150.

Manufactured From Heavy Gauge Steel With An Epoxy Coated Finish. Supplied With A Flexible Polythene Vented Pouring Spout. Suitable For Storage And Transportation Of Petroleum Spirit. Tested To Din 7274, Complies With Un Class 3.

Backed With Strong Permanent Adhesive, Allows Items To Be Easily Mounted Onto Steel Racking, Without The Need For Drilling. Makes Anything Magnetic In Seconds. 13mm Includes Premium Adhesive Backing, 20, 25 And 50mm All Have Foam Adhesive Backing Which Is Ideal For Smoothing Out Irregular Surfaces.images Are For Illustration Purposes Only

Nuts & Boltsmild Steel. Grade 4.6. Contents: M6 X 20, M6 X 40, M6 X 45, M8 X 25, M8 X 30, M8 X 35 And M8 X 50mm.

Manufactured In High Quality Durable Plastic, Lightweight And Easy To Move.incorporates Three Spring Loaded Castors Which Retract When Weight Is Applied.maximum Load: 150kg.images Are For Illustration Purposes Only

Us Federal Specification Rr-c-271d Iv. Self Colour.

Water Resistant, Limited Hands, Jewelled, Stroke 4mm & 5mm, Limited Bezel Movement

A Simple To Use Vibration Monitoring And Analysis Tool That Helps To Diagnose Faults Such As Unbalance, Misalignment And Looseness. â€⢠Overall Vibration Values Are Displayed With Colour Coded Alarm Levels For Iso Values And Bearing Condition. â€⢠Colour Coded Frequency Band Alarms Based On Run Speed Can Be Displayed To Diagnose Machine Faults Such As Balance, Misalignment And Looseness. â€⢠Vibtrend Software Enables Pc Based Trending Of Machine Condition Over Time And Generation Of Reports â€⢠The Fully Dynamic Cursor Displays Frequency And Amplitude Values. â€⢠Readings Are Easily Saved And Recalled, And All Alarm Levels And Settings Are Stored In Non-volatile Flash Memory. â€⢠Run Speed And Machine Type Are Entered With The Simple To Use Setup Wizard. â€⢠Bnc Connector For External Accelerometer.size: 200 X 60mm X 26mm.weight: 280g (not Including Magnet).environmental: Water, Sand And Dust: Ip67 Waterproof, Operating: 0ã‚â°c To 50ã‚â°c, Storage: -20ã‚â°c To 70ã‚â°c. Power Supply: 2x Aa Batteries.max. Ferquency Resolution: 1.25 Hz @ 800 Lines Fft Setting.displayed Vibration Amplitude Units: Acceleration In G Velocity In Mm/s (or Inches/s), Bearing Noise In Bdu (bearing Damage Units).displayed Frequency Units: Hertz (hz), Rpm Or Cpm.input Auto Range: +/- 50g Or +/- 5gdynamic Range: 96db (0.002g Resolution)va Diagnostic Bands (rpm = Run Speed): Unbalance 1x Rpm, Misalignment 2x Rpm, Looseness 3x Rpm.accessories: Standard 100mv/g Bnc, Accelerometer, Nylon Carrying Case.options: Tacho Strobe/flashlight Attachment, Bluetooth Headphones/ear Defenders.

E360quick Drying Whiteboard Makers, Can Be Used On Non Porous Surfaces Such As Enamel, Glass And Melamine. Bullet Tip Nib Width 1.5 To 3.0mm. Low Odour Pigment Ink With No Added Butyl Acetate. Caps Off Ink Means That Markers Can Be Left With Their Cap Off For A Short Time Without Drying Out.pack Of Ten: Black.

For Jobs Where A Standard Hand File, Ref 1-100, Is Too Wide Or Too Thick, E.g. For Filing Of Narrow Grooves.for The Manufacture Of Dies And Punches Etc.pillar File Is A Hand File Of A Slimmer Design.shape: Edges And Surfaces Parallel.surfaces Double Cut. One Edge Uncut, One Edge Single Cut.

Stanley Knife Blads (concave).concave Blade Ideally Shaped For Precise Cutting Out Where Accuracy Is Important E.g. With Leatherwork/marquetry.pack Quantity. 5.

Powerstate Brushless Motor Provides Constant Power Under Load To Power Through 152 Mm Holes. Redlink Plus Intelligence System Delivers The Most Advanced Digital Overload Protection For Tool And Battery And Uniquely Enhances The Tool Performance Under Load. Redlithium-ion Battery Pack Delivers Up To 2.5x More Run Time, Up To 20% More Power, Up To 2x More Battery Life And Operates Better Down To -20ã‚â°c Than Other Lithium-ion Technologies. Powerful, Lightweight Tool With 2-speed Gearbox. Max Drilling Capacities: Wood 19mm,steel 10mm. Rapid Battery Charging. Extreme Long Runtime Up To 75 Holes With A 65 Mm Auger Bit Into Wood. Mechanical Clutch Protects The Tool In The Event Of A Stallall Metal Gear Case And 13 Mm Keyed Chuck For High Durability. On Board Fuel Gauge And Led Light. Powerful, Lightweight Tool With 2-speed Gearbox. Max Drilling Capacities: Wood 19mm,steel 10mm. Rapid Battery Charging. Flexible Battery System: Works With All Milwaukee M18 Batteries.body Only, No Batteries Or Charger Included.

This Professional Rechargeable Head Lamp Takes Personal Lighting To New Levels With Its Sensational Performance And Clever Fastening System Which Also Allows It To Function As A Mobile Spot Light, Body Lamp Or Belt Torch. Boasting Up To 850 Lumens Of A Light It Is One Of The Most Powerful And Technologically-advanced Head Torches In The Ledlenser Line Up. Using A Cutting Edge Cree Xtreme Led Light Chip, In Conjunction With Ledlenser's Patented Advanced Focus System, This Superb Head Lamp Zooms Out Sharply-f Ocused White Light Up To 300m When Focused To Spot Beam. A Simple Turn Of The Head To Refocus And A Flawless Flood Beam For Near Illumination Is Perfectly Achieved. Inside A Clever Pre-programmed Micro-chip Brings The Brilliance Of Smart Light Technology (slt) O The Wearer. Easily Controllable From The Newly Designed Multi-function Wheel Switch On The Battery Pack, Slt Gives The User Two Energy Usage Modes (constant Current, Energy Saving), Three Light Programmes (easy Low, Easy Power, Signal) And Six Light Options (power, Low Power, Boost, Blink, Dim, Pulse). It Means That No Matter Where You Are There's A Light Function To Get You Intto Action Or Even Out Of Trouble. A Rear Safety Light Has Red Or Blinking Light Options So That Your Colleagues Are Always Aware Of Your Location And A Low Battery Message System Informs When The Batteries Need Charging Which Can Be Done From The Supplied Mains Or Usb Charging Connectors. An Eco-friendly Transport Lock Prevents The Light From Being Switched On By Accident So Draining The Battery Unnecessarily. Weight: 340g. Burn Time: 40 Hours. Supplied With: Li-ion Battery Pack, Belt Hook, Mains Charger, Usb Cable, User Manual.

Snmg Turning Insertssquare Insertinsert Grade 235(m25-m40)(p30-p50) Cvd Ti (cn), Tin Coated Grade For Use On Stainless Steel And Steel

Dw292 440nm Of Deliverable Torque In Forward And Reverse. Higher Torque And Faster Speed, Soft Grip Handle And Robust Design For Increased Durability. Max. Torque: 440nm.