These Innovative Earplugs Adapt Perfectly To The Shape Of The Ear And Feature A Revolutionary Design Which Imitates The Anatomy Of Each Ear. This Noticeably Reduces The Pressure In The Ear Canal, Even When Worn For Longer Periods. Pvc-free With An Adjustable Cord. Environmentally Friendly And Cost-effective. Individually Wrapped Plugs.

5% Cobalt Rectangular Inch.cut Faster, 'stand Up' Longer And Reduce Costs. Square And Rectangular Toolbits Supplied With 15ã‚â° Bevelled Ends. Parting-off Blades Supplied With 2ã‚â° Side Taper, 10ã‚â° Bevel (top And Bottom).

Lightweight Polyamide Knitted Glove. Polyurethane Coating At Palm And Fingertips. Excellent Dexterity, Strong Abrasion Resistance Ideal For Automotive Assembly And Fine Component Handling. Added Surface To Provide Extra Grip During Application.cat Ii.

094003contains Components To Make Five Different Puller/separator Ombinations. Consists Of A Thin Jaw Puller, Reversible Leg Puller And Separator. The Ideal Combination For Light Applications. Supplied In Carton.bearing Separator: 10-55mmpuller Reach Max: 89mmpuller Spread: 0 - 140mm External Spread: 155mm

Protective Sleeve And Arm Covering, Elasticated At Both Ends For A Comfortable Fit Manufactured From Polyethylene. Available In A Range Of Colours. One Size: 40 X 20cm (16ã¢â‚¬ï¿¾ X 8ã¢â‚¬ï¿¾).

Slip Joint.hardened Steel Body With Replaceable Soft Nylon Jaws And Bonded Vinyl-coated Handle. For Use On Delicate Or Finished Components Which Normal Steel Jaw Pliers Would Mark Or Damage. Dual Position Joint Allows Use Across A Wide Range Of Diameters. With Serrated Parallel Jaws For Gripping Flat Workpieces And Curved Jaw For Gripping Nuts, Pipes Etc.replaceable Soft Nylon Jaws: See Ken-558-8970k

Cnmg Turning Inserts 80ã‚â° Rhombic Insert Mc6025 - Iso P15 - P25 2-in-1 Technology Provides Excellent Heat And Wear Resistancewhich Helps Prevent Crater Wear. The Smooth Coating Layer Combined With Microscopic Ticn Coating Ensures Better Surface Finish And Long, Consistent Tool Life. Suitable For High Speed And High Ffficiency Machining.

Crosspointtin Coated Bits Improve Wear Resistance, Protect Gripping Points From The Rigors Of Repetitive Use. For Use With Hand And Power Tools.

Removes And Installs Flat Band Hose Clamps. Swivel Tips To Grip At Any Angle. Locking Handle Allows User To Maintain 'open' Position And Hold Clamp In Place.

Swissburr Hand Deburring Tools Are A Fast Effective And Efficient Way Of Deburring Holes, Slots And Edges. Swiss Burr Is A Totally Modular System Of Interchangeable Handles, Holders And Blades Designed To Cover All Applications. A Choice Of Hss Or Carbide Blades, Countersinks And Scrapers Are Available To Suit Your Specific Application. Swiss Burr Blades Are Also Interchangeable With Commonly Available Brands Including Kennedy, Noga, Ruko, Seco, Snap-tap And Stellram.n80 Replacement Blade Hss Double Edged Round Blade For Straight Edge And Sheet Metal Deburring On Materials With Spiral Chips.n80k Replacement Bladehss Blade With Eight Cutting Edges For Slots And Keyways Up To 15.00mm Wide.

5 Drawerdouble Thickness Side Walls With Welded Joints And A Hard Wearing Epoxy Powder Coating. I-beam Draw Slides With Double Sliders On Base Drawer. 100mm Rubber Castors With Brakes Fitted To Two End Castors. Fully Locking. Castors Are Rated To 40kg Capacity Standing Load Per Castor. Drawer Loads Should Be Evenly Distributed. Roller Cabinets Are Not Suitable For Frequent Relocation When Loaded And Should Only Ever Be Pushed.overall Dimensions (w X D X H): 680 X 435 X 660mm.drawer Sizes (w X D X H): 3@ 511 X 403 X 75mm. 2@ 551 X 403 X 155mm.uses 16" Drawer Slides.

A Graphite Coated Iron-nickel Alloy Electrode For High Strength Jointing Of Cast Iron And Cold Welding Of Cast Iron, It Deposits 95%ni + 2%fe Weld Metal.can Be Used For Repairing Broken Cast Iron, Joining Of Cast Iron To Steel And Building Up Worn Parts.meets The Following Standards:aws A 5.15 E Ni-c1din 8573 E Ni Bg 11

Activator That Cures Exposed Instant Adhesives Rapidly. Pre And Post Application.

Series 68 - Long Seriesdimensions To Din 844. Centre Cutting. To Manufacturers Standards. Cutting Diameter To H10. Shank Diameter To H6. Emq-4ps/l Carbide Q-coat.'q-coat' Coating Has Been Specifically Developed To Give Carbide Cutters The 'edge' When Faced With Severe Machining Conditions. Materials Up To 66 Hrc. Dry Cutting. Die And Mould Machining. Reduced Coolant Usage And Disposal. Up To 100% Longer Cutter Life. Reduced Manufacturing Costs. A Multi-layer Coating Capable Of Operating At Higher Speed And Feed. Excellent Oxidisation Resistance. High Speed Machining. Surface Hardness 3300hv. Surface Coefficient Against Steel 0.25. Thickness Of Coating 305um. Maximum Working Temperature 850. Re-coating Service Also Available.

The Centurion Arcpro Ppe System Has Been Designed To Protect Against Arc Flash Risks Posed By Electrical Faults Which Can Occur In The Following Situations: During Live Cable Jointing, Phase Angle Testing, Switchgear Racking Operations, Excavating Near Live Cables, Isolating And Reclosing Of Switchgear And Working On Or Near Live Conductors.n.b. Picture Illustrates Face Screen, Carrier And Browguard Available Separately (helmet Andear Defenders Not Included).

Designed To Provide Reliable And Long Lasting Power. No Mercury Added.

For A Fast, Clean Cut In Wood (up To 50mm) And Plywood And Chipboard (up To 60mm). Supplied In Packs Of 3 Blades.gswgfsgd

Outperforms Other Diamond-plate Sponge Products. The Unique Nitricell Sponge Base Delivers Twice The Resilience And Three Times The Life Expectancy Of The Simple Pvc Sponge Used In The Matting Industry. Wearwell's Pre-bevelled Edge Assures A Perfect Lays Flat Quality. The Sponge Is Extended Within 1.5 Inches Of The Mat's Surface For 20% More Standing Area Than Others In The Market.ã¢â‚¬â¢ Chemical And Abrasion Resistant â€⢠Diamond-plate Pattern For Improved Traction.ã¢â‚¬â¢ 2x The Resilience And 3x The Life Of Look-alikes â€⢠Maximized Standing Area â€⢠Unique Pre-bond Bevel And Lay-flat Design Prevent Trip Hazards

Bi-hexagonal, Metric Sockets. Manufactured From Chrome Vanadium Steel Witha Polished Finish.

Length: 150mm (6 In).size: 2mm (5/64 In)sb-373n Series Parallel Pin Punches Made From Vanadium Extra Steel With A Hexagonal Shank. Fully Polished Steel Surfaces And A Brilliant Chrome Finish.length: 150mm (6 In).size: 2mm (5/64 In)

3 1/2ã¢â‚¬ï¿¾ Vegetable Knivesshort Rigid Blade. Sharp At Tip Only. Suitable For Peeling Vegetables. Most Granton Knives Are Made From Fully Hardened And Tempered Stainless Steel And Are Easy To Clean. Both The Black And Coloured Handles Are Insert-moulded From Polypropylene Co-polymer To Withstand Sterilising And Dishwasher Use And Do Not Present The Potential Health Hazards That Are Frequently Associated With Other Knives. Our Blades Are Laser Tested And Made To Bs En Iso 8442-1:1998 From Hot Sheffield Forgings Or Fully Hardened And Tempered Stainless Steel, Double Taper Ground And Hand Finished.cross Contamination - The Granton Colourgriptm System All Granton Knives Are Available With A Choice Of Red, Blue, Yellow, Green, Brown, White Or Black Handles. This System Helps Prevent Cross Contamination By Assigning Coloured Handles To Particular Work Areas. This Table Shows How Coloured Handles Can Be Assigned To Particular Work Areas. This Offers Instant Visual Identification Of Potential Cross Contamination Hazards.the Patented Granton Edgethe Patented Granton Edge Can Be Found In Every Place Where A Perfect Cutting Edge Is Appreciated. First Introduced Over 80 Years Ago, The Secret Of Its Success Lies In The Precision With Which The Scallops Are Ground On Alternate Sides Of The Blade, Giving The Keenness Of A Hollow Ground Razor Coupled With The Strength Of An Ordinary Knifr. In Addition, The Patented Ground Scallops Create Air Cushions Which Allow For Smooth And Fast Cutting. Granton Knives Only Require To Be Steeled Occasionally In The Normal Way To Retain A Perfect Cutting Edge.

90ã‚â° Handle - Brass - Dw2non-sparking Brass Construction. Suitable For 2ã¢â‚¬ï¿¾ And 3/4ã¢â‚¬ï¿¾ Bungs. Multi-purpose Wrench Head. Additional 1 1/4ã¢â‚¬ï¿¾ Socket For Tightening Drum Taps. Length: 300mm.

Seamless Knit Lightweight Dyneema Filament Yarn 5 Finger Glove With Polyurethane Coated Palm. For General Handling With Good Cut And Abrasion Resistance.anatomical Shaped To Reduce Fatigue.seamless Knit To Reduce Irritation And Maximise Comfort.open Back To Allow Flexibility And Breathability.designed To Be Laundered.lint Free.elasticated Cuff For Exacting And Comfortable Fit.pu Coating Provides Grip And Tactility.length: 26cm.available In Sizes 7, 8, 9 And 10.

Oksrtc737lead-free Compatible. For Use With Robotic Applications And Mx-rm5e Or Mx-rm8e Handlesonly. Rohs Compliant.shaft Length: 80mm.chisel Tip: 1.78mm 30ã‚â°.

Chair Arm To Fit Operators High Back Chair.fixed Height Arm Option.adjustable Height Arm Option