|
|
Kennedy Recoil 1/8"-40 Bsw Single Size Kit.
Suitable For Repairing Damaged And Worn Threads, Also Ideal For New Applications. Ideal For Use With Alloys And Other Light Materials. Can Also Be Used For Converting From Metric To Imperial And Vice Versa. 11/2" X Diameter In Length.
Manufacturer: Kennedy Recoil
ID: Ken-620-5040k
Category: Materials , amp, Maintenance , gt, Maintenance , amp, Repair , gt, Thread Repair
SKU: Ken6205040k
|
|
|
Hitachi Cutting Tools Ednw10t3tn-10 Insert Grade Cy150.
Ednw Milling Insertsinsert Grade Cy150(iso P05-p25 M10-m20) New Pvd Coated. For Milling Hardened Steels, Carbon Steels And Alloy Steels. Excellent Heat And Wear Resistant Properties.
Manufacturer: Hitachi Cutting Tools
ID: Wf 573
Category: Cutting Tools , gt, Milling , gt, Milling Inserts
SKU: Hit1222120c
|
|
|
Ntn Snr Sc508sv Pillow Block V-ri Ng Seal.
The Sc...sv Series Consists Of A Contact Washer Made Of Corrosion-protected Steel With A Vulcanised Rubber Lip To Locate In The Housing. The V-ring Seal Has Axial Contact After Being Fitted To The Shaft With The Face Of The Washer. If The Shaft Extends Through The Housing One Seal Pack Must Be Ordered For Both Side Of The Housing. Other Sealing Arrangements Are Available Through Your Local Service Branch.
Manufacturer: Ntn Snr
ID: Sc508sv
Category: Bearings , amp, Transmissions , gt, Bearings , gt, Seals , amp, Cover Plates
SKU: Snr6817215g
|
|
|
Indexa Cc240210 M10x26mm Eccentric Cam Lock.
Cc24 - Eccentric Cam Lockmaterial: Medium Carbon Steel.hardness: Hrc 35.surface Finish: Black Oxide.
Manufacturer: Indexa
ID: Cp24-1026
Category: Spindle Nose , amp, Workholding , gt, Workholding , gt, Fixturing , gt, Clamping Components
SKU: Ind4251110c
|
|
|
Kennedy 17mm 30swg Flat End De-ca Rb Brush.
Flat End Decarbonising Brushes.for Hard To Reach Areas Such As Drilled Holes, Recesses And Corners. For Removal Of Burrs, Rust And Paint. 30 Swg
Manufacturer: Kennedy
ID: 0se-05-004
Category: Abrasives , gt, Descaling , gt, Brushes , gt, Wire Wheels , amp, Brushes
SKU: Ken2956440k
|
|
|
Kennedy 900x38mm Chisel & Point Crow Bar.
For Heavy Duty Work. Manufactured From Heat Treated Carbon Steel. Ideal For Dismantling Timber Constructions, Opening Packing Cases And Removing Nails (depending On The Type Of Bar).
Manufacturer: Kennedy
ID: Ken5057360k
Category: Hand Tools , gt, Building , amp, Constructipn , gt, Cold Chisels, Wrecking , amp, Pry Bars
SKU: Ken5057360k
|
|
|
Swisstech 8.0 Scr Standard End Mill -tialn-8% Co.
Series 36 - Regular Series, Tialn Coateddimensions To Din 844. Centre Cutting. Threaded Shank To Din 1835d. Shank Cutting Diameter To +0.04 -0.0.available In Hss-co 8% Uncoated (for General Production Machining), Hss-co 8% Ticn Coated (extends Cutter Life And Improves Work Material Surface Finish) And Hss-co 8% Tialn Coated (dissipates And Resists Heat, Reduces Surface Friction Coupled With High Surface Hardness).
Manufacturer: Swisstech
ID: Crswt1633668a
Category: Cutting Tools , gt, Milling , gt, End Mills , gt, Hss-co, End Mills - Regular Series
SKU: Swt1633668a
|
|
|
Polyco Gl8885 Bodyguards White Latex Disposable Gloves - Size Xl.
Latex Powder-free Disposable Glove. Provides Maximum Dexterity, Sensitivity And Comfort. Textured Finish For Improved Grip. Colour: Natural.aql 4.0.cat I
Manufacturer: Polyco
ID: Gl888
Category: Personal Protection , amp, Clothing , gt, Hand , amp, Arm Protection , gt, Gloves , gt, Disposable Gloves
SKU: Ply9613875d
|
|
|
Mascot Aveiro Black Hardwear Jacket - Size 2xl.
Breathable, Wind And Waterproof Shell Jacket With Taped Seams. Hood Can Be Folded Into Collar And Has An Adjustable Drawstring. Waterproof Zips. 100% Nylon.
Manufacturer: Mascot
ID: 05003-127-09
Category: Personal Protection , amp, Clothing , gt, Clothing , amp, Workwear , gt, Coats, Jackets , amp, Fleeces
SKU: Msc9621514e
|
|
|
Solent Cleaning Scf360-2w White C/feed 2- Ply Roll 19.5cmx144m (6).
Solent Cleaning & Hygiene Centre Feed Wipers Are Available As Single Ply Wipes Suitable For General Wiping Or As Two Ply Heavy Duty Wipes. They Are Supplied On Rolls With A Removable Cardboard Core To Allow Them To Be Used Either As Centre Feed Rolls In A Dispenser Or With The Core Still In Place On A Floor Stand. The Wipes Are Ideally Suitable For All Garage, Workshop Applications And Most General Industrial And Automotive Object Wiping Applications. Each Roll Is Perforated For Easier Dispensing Of Each Sheet.available As Blue Or White Rolls In Five Different Roll Widths And Lengths.for Centre Feed Dispenser See Sol-952-9000a
Manufacturer: Solent Cleaning
ID: Cwh375s
Category: Cleaning , amp, Hygiene , gt, Cleaning Hardware , gt, General And Industrial Cleaning Cloths And Wipes , gt, Industrial Cleaning
SKU: Sol9522570t
|
|
|
Makita Da3010f/1 10mm 450w Angle Drill With Led Job Light - 110v.
Da3010f - Keyed Chuck.right Angled Drill, Ideal For Access Into Tight Spaces Such As Beween Joists.no Load Speed: 2,400rpm. Max. Drill Capacities: Steel 10mm, Wood 25mm.weight: 1.40kg.
Manufacturer: Makita
ID: Da3010f
Category: Power Tools , gt, Corded Power Tools , gt, Drills , amp, Hammers , gt, Angle Drills
SKU: Mak2755940m
|
|
|
Osborn Wizard Ultra Ms12.0x1.50sp/point.
Bright Finish. Designed For Hand And Machine Tapping A Variety Of Materials, The 'ultra' Is Manufactured From Dust Metallurgical Hss Base (pm3) For Increased Toughness And Longer Life. For Machining Through Holes In Non-ferrous Materials And General-purppose Applications. To Iso Class 2/6h - Iso529, Bs949 Pt1 (1976).
Manufacturer: Osborn
ID: F5330475
Category: Cutting Tools , gt, Threading , gt, Taps - Production , gt, Hss-co Production Taps
SKU: Mgz0850429d
|
|
|
|
|
|
Rothenberger 3.5535 Propane Gas Cylinder.
Propane Gas Cylinder - 3.5535disposable Propane Gas Cylinder. Ideal For Jet Torch, Quick Fire, Super Fire 2 And Micro Fire.map/pro Gas Cylinder - 3.5536based On A Stabilised Mixture Of Methylacetylene (propyne) And Propadiene. Mapp Gas Is Safer Than Acetylene; There Is No 15psi Limit And It Can To Use On Board Ships And In Mines. Delivers Higher Temperatures Than Propane. Although Acetylene Has A Higher Flame Temperature (3160ã‚â°c, 5720ã‚â°f), Mapp Has The Advantage That It Requires Neither Dilution Nor Special Container Fillers During Transport, Allowing A Greater Volume Of Fuel Gas To Be Transported At The Same Given Weight, And It Is Much Safer In Use.
Manufacturer: Rothenberger
ID: 35535
Category: Welding, Brazing , amp, Soldering , gt, Gas Welding , gt, Blowpipes , amp, Nozzles , gt, Disposable Gas Cartridges
SKU: Rbc5663535r
|
|
|
Matlock Blue Plastic Key Rings (pk-50).
Manufactured From Plastic With A Removeable Address Label. Fitted With A Metal Key Ring. Pack Of 50.fob Size: 30 X 50mm
Manufacturer: Matlock
ID: Crmtl8209020k
Category: Site Safety , gt, Security , gt, Key Fobs
SKU: Mtl8209020k
|
|
|
Canning-lippert 0401-347 10"x4 Section St Apol Sisal Mop.
Preparationstapol 100% Sisal Mops With Cotton Interleaving. Used For Heavy Duty Mopping Operations On Steel And Non-ferrous Metals. Also Used For Removing Grinding Marks Left From Previous Abrasive Operations. Available Untreated Or In 3 Grades Of Treated Mops - Simpol, Orange And Blue, All Increasing In Hardness And Composition Retention Respectively. Orange And Blue Treatment Available On Request.
Manufacturer: Canning-lippert
ID: L043123361
Category: Abrasives , gt, Finishing , amp, Polishing , gt, Polishing Mops
SKU: Cng2471411l
|
|
|
Uvex Xg20a Profi Ergo Gloves - Size 9.
Profi Ergo Xg20athe Professional Profi Ergo Xg Safety Gloves Serie With Innovative Uvex Xtra Grip Technology Combines Protection, An Exceptionally Comfortable Grip And Dexterity And Boasts Exceptional Resistance Times, Thanks To The Multilayer Construction. The Uvex Profi Ergo Xg Serie Is Nbr Coated (nitrile Butadiene Rubber). Manufactured To En388 3.1.2.1.
Manufacturer: Uvex
ID: Xg20a
Category: Personal Protection , amp, Clothing , gt, Hand , amp, Arm Protection , gt, Gloves , gt, Mechanical Hazard Gloves
SKU: Uvx9619570g
|
|
|
Bowers Group Sxta6m Bore Micrometer Set.
Metric (sets With Setting Rings)economical Range Of Mechanical Three Point Micrometers With Xt (extended Travel) Feature On All Models Between 6 - 200mm Capacity. This Allows A Wide Measurement Range Without The Need To Change Anvils. Both The Measuring Head And Setting Ring Are Ukas Calibrated (6 - 200mm Range Only). Blind Bore Measurements Are Available Above 12.5mm. Tungsten Carbide Measuring Faces On All 3-point Heads From 12.5mm. (micrometers With Inch Setting Rings Are Available On Request.)
Manufacturer: Bowers Group
ID: Sxta6m
Category: Measuring , amp, Test Equipment , gt, Mechanical Gauges , gt, Internal Micrometers, Calipers , amp, Gauges , gt, Digital Bore Gauges
SKU: Bow3355725m
|
|
|
Dormer Ep01 M5x0.80 6h Hss-xs1 S P/pt Tap.
â€⢠Multi-application Machine Taps Offering Superb Performance In A Spacious Range Of Materials.ã¢â‚¬â¢ Programme Includes Din And Iso Standard Taps Each With A Choice Of Finishes: Bright, Steam Tempered Or Titnium Nitride Coated (tin).ã¢â‚¬â¢ Wide Selection Of Different Thread Forms: Metric, Metric Fine, Unc, Unf And (g)bspã¢â‚¬â¢ Available With Either Spiral Point (for Through Holes) Or Spiral Flute (for Blind Holes) Geometries.ep01 Steam Tempered Metric: M2 - M30.steam Tempered Suitable For: Steel, Stainless Steel And Cast Iron
Manufacturer: Dormer
ID: Ep01m5
Category: Cutting Tools , gt, Threading , gt, Taps - Production , gt, Hss-va Production Taps
SKU: Dor1853684e
|
|
|
Energizer Aaa Rechargeable Battery Nimh (pk-2).
Lasts 3x Longer Than Standard Alkaline Batteries In High Drain Devices. High Capacity Charge Retention Up To 1 Year.can Be Charged More Than 400 Times.ideal For Powering High Drain Devices Such As Digital Cameras And R/c Toys.
Manufacturer: Energizer
ID: Powerplus Aaa Pk2
Category: Office Supplies , amp, Stationery , gt, Batteries , amp, Chargers , gt, Nimh Batteries
SKU: Enr9040090k
|
|
|
Bosch Glm80 + R60 Professional Laser Rangefinder.
The Inclinometer That Also Measures Distances. Measuring Rail R60 Professional For Use As A Digital Inclinometer. Combined Measurement Functions Due To Integrated 360ã‚â° Incline Sensor. Units Of Measure: M/cm/mm.contents:1x R60 Professional Measuring Rail.1x Glm 80 Laser Measurer.1x Protective Cse.1x 1.25ah Li-ion Battery.1x Charger.1x Manufacturer's Certifiicate.
Manufacturer: Bosch
ID: 601072371
Category: Hand Tools , gt, Building , amp, Construction , gt, Laser Levels , amp, Measures
SKU: Bch2662181a
|
|
|
Table Top Fridge 48ltr White.
Fitted With 1 Adjustable Wire Shelf And A Reversible Door With 1 And 1/2 Fridge Door Shelves. Adjustable Thermostat With Manual Defrost Freezer And Adjustable Feet. Dimensions (w X H X D): 472 X 492 X 450mm. Energy Rating: A+.capacity: 48ltr.
ID: 20/001/010
Category: Catering Supplies , amp, Appliances , gt, Kitchen Appliances , gt, Refrigeration
SKU: Ctl7870100k
|
|
|
North By Honeywell N06575081l Filter A1p3 (pair).
Benefits:- Lightweight And Low Profile- Low Breathing Resistance, Less Fatigue- Colour Coding For Fast And Easy Identificationproperties:- Plastic Housing- Internal Thread Connectorscolour: Brown/white
Manufacturer: North By Honeywell
ID: N06575081
Category: Personal Protection , amp, Clothing , gt, Respiratory Protection , gt, Air Fed Respirator Accessories
SKU: Nrh9595853f
|
|
|
Dormer B101 8.00mm T/s Machine Reamer.
Hss Spiral Flute Straight Morse Taper Shank Machine Reamer For Opening And Finishing Existing Holes To H7 Tolerance.suitable Most Ferrous And Non-ferrous Materials.7ã‚â° Helix, Left Hand Spiral For Excellent Surface Finish.manufactured To Bs328 Standards.only To Be Used For Through-hole Machining.
Manufacturer: Dormer
ID: B1018.0
Category: Cutting Tools , gt, Reaming , gt, Machine Reamers , gt, Hss Taper Shank Machine Reamers
SKU: Dor0651830l
|
|
|
Flexipads 150mm Da Cyclone 21h Hard 5/16" Grip.
Cyclone Pads Feature A Hollow Upper Chamber To Create A Internal Cyclone Effect Optimizing The Dust Suction Of Every Hole For Advanced Dust Extraction.rpm 12,000. Foam Layer 10mm
Manufacturer: Flexipads
ID: Fe622
Category: Power Tools , gt, Consumables , amp, Accessories , gt, Backing Pads
SKU: Fxp2800010d
|
|
|