Tranemo Work Wear Is Manufactured And Tested To The Utmost Rigorous Standards To Ensure It Works As Hard As You Do! For Contemporary Design And Stylish Work Wear Choose Tranemo Workwear.

Guhring Fire Coat Drills Solid Carbidefor Drilling Into General Steel, Cast Steel, Cast Iron, Chilled Cast Iron, Malleable Cast Iron, Non-ferrous Heavy And Light Metal, And Abrasive Plastic. Self-centering. Point Angle: 140. Tolerance Of Diameter: M7. Tolerance Of Shank: H6. Manufactured To Din 6537. Metric Sizes Up To 20mm And Inch Sizes Available On Request.fire Coating:applied In Guhrings Own Coating Plants Using The Pvd Process. All Round Coating Can Achieve Two To Three Times The Performance Of Tin, And Considerably Better Than Tialn. Has Excellent Heat Resistance As Well As High Toughness, Therefore It Is Well-suited For Interrupted Cutting.

Clear Gel Mouse Mat Complete With Cord Router To Organise Mouse Cables. Also Has A Lift Up Pvc Cover Allowing You To Insert And Change Pictures, Etc.

Iscar Has Developed A New Insert Designated Pentacut, With 5 Cutting Edges, For Multifunction Applications Including Grooving, Parting, Recessing Nd Chamfering. This Cost Effective Insert Is Designed To Perform Shallow Grooving Operations And Parting Of Small Solid Bars Up To 12.5 Mm In Diameter. Each Cutting Edge On The Pentagonal Shaped Insert Is Equipped With A Unique J-type Positive Chipformer That Provides Excellent Chip Control In Grooving, Parting And Recessing (light Side Turning) Applications.for All Dimensional And Technical Specifications Please Refer To Our Catalogue.

Replacement Styli For Kennedy Lever Type Dial Test Indicators. Carbide Steel.ken-301-9440k - Stylus To Suit Old Style Metric Types Only.ken-301-9860k - Stylus To Suit New Style Metric Types Only.ken-301-9630k - Stylus To Suit Old Style Imperial Types Only.

Hardened And Polished Taper Blades Enclosed In A Steel Case. Blades Are Clearly Marked. Manufactured To Din 2275.blade Length: 75mm/3".no. Of Blades: 18range: Metric: 0.05mm - 0.5mminch: 0.0015" - 0.025

High Tensile Short Link Chain With A Black Powder Coated Finish. It Is Designed To Be Used In Conjunction With A Load Binder. Certificate Of Conformity Issued As Standard. Also Available In Longer Lengths.

Manufactured From Drop Forged Medium Carbon Steel (sae/aisi 1055). Heat-treated With A Polished Mirror Finish. For General Reshaping Of Contoured Panels, Raising Low Spots And General Panel Beating.

Ring End Slogging Wrenchwith Flat Striking Faces To Allow Hammer Blows To Be Used To Loosen Or Tighten Stubborn Fasteners.spark-resistant Tools Are Used To Eliminate The Chances Of Accidental Fires Or Explosions In Potentially Combustible Or Explosive Environments. They Resist The Sparks That A Standard Tool Could Potentially Create When Striking Hard Surfaces. The Use Of Spark Resistant Tools Is Essential In Many Industrial Applications Such As Petroleum And Chemical Manufacturing, Spray Booth Operations, The Marine Industry, The Mining Industry, The Paper Industries, Or Any Location Where Flammable Vapours Or Combustible Residues Are Present. Beryllium Copper Are Manufactured To 30-10hrc And Offer A Breaking Strain Of 1117 N/m - 1236 N/m. Spark-resistant Tools Must Be Maintained With Special Care. Frequent Cleaning/re-dressing To Remove Ferrous Particles Or Contaminants, Which May Deteriorate The Spark Resistant Properties, Is Essential.

Made From High Density Hardwood. For Similar Work As Bending Sticks, With A More Acute Curve. Designed For Flashing And Lead Work.

Manufactured To Surpass The Performance Test Bs2558: 1954. The Sockets Locate Directly Onto The Handle Relieving Stress On The Rivet. All Sockets Are Plated, Hardened And Stress Relieved To Ensure They Retain Their Shape.spinner Head Spanner The Handle Is Produced From A One Piece Drop Forging With A 7/16ã¢â‚¬ï¿¾ And 1/2ã¢â‚¬ï¿¾ Whitworth Double Ended Socket For Use On Fixings. Features A Taper Podger End Used To Line Up Holes And Manipulate Fixings. Rotating Socket Offers A Single Tool For Two Fastener Sizes.overall Length: 245mm.socket Size: 7/16ã¢â‚¬ï¿¾w X 1/2ã¢â‚¬ï¿¾w.

3 Pocket 2 Loop Nail & Tool Pouch - Oil Tanlarge Nail And Tool Pouch With Three Pockets And Two Tool Loops. Fully Brass Riveted Construction. Manufactured From Oil Tanned Leather.

A Thinner And Lighter Glove Ergonomically Designed To Reduce Hand Fatigue. Unparalleled Comfort And Sensitivity. Increased Tactile Sensitivity. Reliable Durability. Protection From Type 1 Allergies. Contains No Natural Rubber Latex.

High Humidity And Chemical Resistance.colour: Transparent, Light Amber.viscosity In Mpaã‚â·s: 4.500.depth Of Cure In Mm: 4.tack Free Time* In Sec.: 20.fixturing Time** In Sec.: 15.shore Hardness: D 70.suited For Plastics.well Suited For Metals.suited For Ceramics.well Suited For Glass.fluorescence: No.service Temperature Range: -54 Ââ°c To +150 Ââ°c.pack Sizes: 50ml, 250ml.

Chemical Absorbent Pads And Rolls Are An Ideal Solution, White In Colour, They Absorboil Based Fluids Only And Repel Water. They Are Also An Excellent Item To Supplement Our Spill Kits And Spill Centres.extra Padsã¢â‚¬â¢ Tested To Bs 7959.size: 50x40cmpack Qty: 100 Absorption: 120ltr

Auto Retract Blade For Safety.pocket Sized Folding Safety Knife For Convenience.takes Standard And Round Nose Blades.instant Blade Change - For Quick Use.

The Health & Safety At Work Act 1974 (hsw Act) Requires All Employers To Ensure The Health & Safety Of All Employees And Anyone Who May Be Affected By Their Work, So Far As Is Reasonably Practicable. This Includes Taking Steps To Address Trip Risks. The Hsw Act Also States 'employees Have A Duty Not To Put Themselves Or Others In Danger'. A Robust Health & Safety Policy Should Make An Example That Employees Do Not Leave Cables Trailing As A Danger To Their Fellow Workers, And That Any Breach Is Reported Immediately.the Costs And Risks From Cable Clutter Can Be Easily Sorted With A Range Of Value And Innovative Cable Management Products.floor Cable Cover - Light Dutyideal To Protect Cables And Eliminate Trip Hazards In Light Foot Traffic Areas. Neat Tapered Design, Abrasion-resistant With A Ribbed, Non-slip Back. Pre-split Rear For Ease Of Use. Made In Uk. Colour: Black.dimensions: 600mm X 1.8m.channel Size (w X H): 17 X 9mm (can Protect 2x 8mm Diameter Cables).

Series 01000 Hss Straight Shank Jobber Drillsmetric

Tva150this Meter Is For Measuring Airflow And Temperature. It Is Ideally Used To Measure The Air Speed At Ventilation Outlets And To Test Temperatures In Residential And Commercial Environments Such As Offices, Storerooms, Greenhouses And Places Where Climate Conditions Can Be Analysed. Conforms With En61326-6: 2006 And En61326-2-2: 2006. Meter Capabilities: â€⢠Measuring Wind/airflow In: M/s, Km/h, Fpm, Mph, Kts. â€⢠Beaufort Scale. â€⢠Temperature In Both Ââ°c And Ââ°f. Testing Ranges: 0.4 ~ 20m/s, 80 ~ 4000fpm, -10 ~ 50ã‚â°c (14 ~ 122ã‚â°f). â€⢠4 Digit Clear Lcd Display With Optional Back Light. â€⢠Data Hold Function. â€⢠Auto Power 'off' And Low Power Indicator. â€⢠Battery Operated - Dc1.5v 3x Aaa (included).

Eco Friendly Cob Led With 90% Energy Saving When Compared With Ordinary Floodlights. Adjustable Heads To Light Up Out Of Reach Areas With 120ã‚â° Beam Angle. Aluminium Diecast Alloy Body With Stainless Steel External Fixings And Toughened Glass. Lifespan Of 30,000 Hours. Suitable For Outdoor Use. 90cm Cable.

400mm Wet Nozzle (38mm) For Use In Wet Or Dry Environments

Msw 'swing Ball' Modular Heads.for All Dimensional And Technical Specifications Please Refer To Our Catalogue.

Top Grain Calfskin Welding Glove With Reinforced Thumb. Seamless Index Finger For Better Feed Of Tig Wires. To En 12477 (09.2005) Type A/b.

P-5188913 Piece Masonry Drill Bit Set With Tungsten Tip. Good Cutting Speed And Durability. For Use With Percussion Drills On Brick, Block, Stone Or Light Concrete. Tungsten Carbide Tip To Din8039 Standard.sizse: 4, 5, 5.5(x3), 6(x2), 6.5(x2), 7(x2), 8(x2)mm.

Quality Non-woven Beard Mask With Elasticated Edges And Headband, Intended To Cover Beard And Mouth. Used For Low Risk Applications. Widely Used In The Food Industry.