3m 266l 125mmhole Pattern: 500a - 5 Holes.micron Graded Aluminum Oxide Resin Bonded To A 3mm Polyester Film Backing. Open Coat Abrasive Surface Is Coated With A Dry Lubricant To Resist Loading. With Loop Backing For Attachment To Hook Faced Backing Pads. Easy To Re-use.

300gsm Proban Flame Retardant Cotton Fabric, With Stud Front Fastening. Two Hip Pockets And One Chest Pocket. Action Back.inside Leg Measurements: Regular 31" And Tall 33".colours: Red, Orange And Navy.colours Are For Guidance Only

Water And Shock Resistant Design. Supplied With Nylon Neck Cord.specification:1/100 Second Precision With Split Times. Calendar And Time Display 12hr Or 24hr Format. Daily Alarm. Hourly Chime. Supplied Complete With 1.5v Battery.

Aluminium Frame Motors - Ie2 (high Efficiency) Three-phase Motors. These Motors Exceed The Ie2 Efficiency Levels Specified In The Iec 60034-30 And The Requirements Of The Eup-directive 2005/32/ec. Thermisters Fitted As Standard In Frame 132 And Above. Ip55 Protection As Standard (up To Ip66 On Request).standard Features: Top Mounted Terminal Box With Metric Cable Entries. Interchangeable With Iec Metric Motors. Class F Insulation With Class B Temperature Rise. Metal Covers And Stainless Steel Nameplate.output: 0.12 To 500kw. Number Of Poles: 2, 4, 6 And 8.frequency: 50hz.voltages: 220 - 240/380 - 415v (up To 100l). 380 - 415/660v (from 112m And Up). Frame Sizes: 63 To 355.colour: Ral 5009 Blue.aluminium - B3 - Foot Mounted - 4 Pole - 1500rpm - Ac 3 Phase

Conical 60ã‚â° Inc. Angle.all Sizes Are Nominal. Sizes Marked * Are 3mm Shank, All Others Are 6mm Shank.cut Numbers:cut 9 - Chipbreakerchipbreaker Fast Stock Removal For Improved Control And Reduced Chips For Use On Hard Materials, I.e. Steel Alloy 50rc, 60rc, Carbon And Cast Iron.suitable For Deburring And Polishing Of Cast Iron, Cast Steel, Carbon Steel, Alloy Steel And Stainless Steel Etc. Up To Hrc65 Hardness.please Note:workpiece And Tlols Should Always Be Steady And Well Supported.carbide Burrs Are Not Suitable For 'milling' Large Amounts Of Material, They Are For Light Stock Removal At High Rpm's 'low Feed - High Speed'.always Ensure That At Least 70% Of The Shank Length Is Clamped By The Collet Or Chuck Of The Tool Being Used.always Ensure That The Tool Is Rated To The Recommended Operating Speed Of The Burr.

9088-200 Has A High Level Of Adhesive Peel And Shear Providing Good Adhesion To Both High Andlow Energy Substrates. Typical Markets Include: Plastic Extrusions, Auto Trim And Interiors, Point Of Sale Signage, Blind Manufacturers, Furniture Trim, Metal Fabrication Plastic, Picture Framing, Sports Equipment, Fabric & Leather Stitching Print Finishing, Card Mailing, Blister Packs And Packaging, Elevators/lifts, Badge And Nameplates, Shop Fitting.

This Ingenious Tool Is Invaluable In The Garage Workshop For Testing The Quality Of Brake Fluid. Testing For Moisture Content In The Fluid By Resistance To Electric Current. You Get Instant Results From The Built-in Led Indicator Light System. (runs On 1 X 1.5v Aaa Battery).

Suitable For Use With Power On. For 6, 12 And 24v Automotive Systems Only. Locates Shorts, Earths And Open Circuits. 1.4m Heavy Duty Lead With Spring Strain Relief. Super Sharp Stainless Steel Probe To Test Through Wire Insulation. Probe Length: 100mm.

A Range Of Professional Polishing Foams For Use With All Makes Of Power Tools. Offers A Completesurface Finishing Solution. All Pads Are 150mm Diameter X 50mm Deep.red Final Polishing Foamultra Soft Reticulated Foam For Final Polishing/finishing. Designed To Allow Free Flow Of Air.

Plain Bearing Models Precision Crafted. Heavy Duty Performance. All Parts Are Hardened For Maximum Tool Life.model: 42-13b.drill Cap: 0-3/8??mount: 3/8?? X 24f

4 Pocket 2 Loop Tool Pouch - Oil Tanlarge Tool Pouch With Four Pockets And Two Tool Loops. Fully Brass Riveted Construction. Manufactured From Oil Tanned Leather.

Spun Turning Insertssquare Insertinsert Grade Kc850(m25-m45)(p25-p45). A Tri-phase Coating On An Extra Strong, Cobalt-enriched Substrate. For Heavy Cutting Of Low,medium, And High Carbon Steels, As Well As Medium Hardness Alloy And Tool Steels. Excellent Thermal And Mechanical Shock Resistance Makes This Grad

A108 Hss Straight Shank Jobber Drills For Stainless Steel - Metricdrills Up To 4 X Diameter. Split Point. Point Angle: 135ã‚â°. Size Range: 1.0 - 16.0mm, 1/16" - 1/2".manufactured To Bs 328, Din 338.

H400 Rnhu Milling Inserts Double-sided Inserts With Four 5, 6 And 8 Mm Radii Cutting Edges For Profile Milling Applications. Available Are Three Different Insert Configurations For Machining Different Materials And Applications (helido Round H400 Line).insert Grade Ic830a 'sumo Tec' Altin+tin Pvd Coated Grade. Recommended For Interrupted Cut And Heavy Operations On Stainless Steel, High Temperature And Alloyed Steel. High Toughness And Wear Resistance.iso Range - P/m/k: (p20-p40)(m25-m35)iso Range - H/s/n: (s15-s30)grade Or Coating Type: Pvdcoating Layers: Altin+tin

Fluke Vt04 Visual Ir Thermometer Helps You Detect Issues Instantly By Combining The Convenience Of An Infrared Thermometer With The Visual Advantage Of A Thermal Imager - Creating A Brand New Tool Category.vt04 Features Pyroblend Plus Technology That Delivers 4x Sharper Images For Enhanced Problem Detection, Best-in-class Field Of View For Tight Spaces, And Powerful Automatic Monitoring Features That Detect Stubborn, Intermittent Issues. â€⢠Breakthrough Affordability - Fraction Of The Cost Of Infrared Cameras.

Qualfast Qualfast St4.8x38mm Sn Self-drill Cross Csk Screw Bzp - Pack Of 200 Fasteners > Screws > Self Drilling Screws

The One Piece Steel Cage, Used In Most Caged Drawn Cup Bearings Is Designed To Provide Rigidity And Minimize Wear. This Cage Design Separates The Roller Guiding And Roller Retainment Functions. The Portions Of The Cage That Retain The Roller Cannot Contact The Rollers While The Bearing Is Operating. Thus There Is No Wear Which Might Affect Roller Retention.

A Top Quality Metal Gun For Use With Gun Grade Polyurethane Expanding Foams. Screws Onto The Canister For Quick And Easy Application.

Features Enhanced Protective Action Through Skin Protection Pigments Travabon Classic (travabon S) Facilitates Cleansing Of The Skin Thanks To Soil Suspending Emulsifiers With Glycerine And Emollients.characteristics Ointment (suspension) Oil-freetypical Hazards Water-insoluble Substances Stubborn, Non-water-soluble Dirt Such As Oils, Paints, Graphite, Metallic Dust, Carbon Black, Adhesives

A Lightweight But Robust Glove With A Smooth Nitrile Palm Coating That Protects The Hand From Oil, Hydrocarbon And Grease Penetration. 13 Gauge Seamless Lint-free Liner With An Elasticated Cuff. Breathable Back Of Hand And Fingers For Long Term User Comfort. Offers High Levels Of Dexterity, Tactility And Excellent Dry Grip.

Large, Ergonomically Designed Seat And Backrest. With Integrated Lumbar Support.backrest Height Adjustment Convenient And Easy To Operate In Sitting Position.360ã‚â° Rotation Of The Seat. Unitec 2 Seat Comes With Load Sensitive Brakes.unitec 3 Seat Comes With Stop & Go Castors.unitec 2 Seat Height: 440-620 Mm Unitec 3 Seat Height: 580 - 850 Mm Seat Depth: 470 Mm Seat Width: 460 Mm Seat Finish: Synthetic Leathe Rsoft, Washable And Comfortable Colour: Black Unitec 2 Weight: 12kgunitec 3 Weight: 14kg

New To The Milwaukee Fuel Range. 12 Volt Compact Fuel Sds Dual Mode (rotary Or Rotary + Hammer) Hammer Drill. Industry's First Brushless Compact 12v Whirling Hammer Drill. Exceptionally Low Vibration Value 4.4 M/sã‚â³ Can Be Used For 8 Hours In A Day. Will Drill Over 60, 6 Mm Holes Per Battery Charge. Redlink Plus Intelligence System Delivers The Most Advanced Digital Overload Protection For Tool And Battery And Uniquely Enhances The Tool Performance Under Load.redlithium-ion Batteyr Pack Delivers Up To 2x More Run Time, Up To 20% More Power, Up To 2x More Battery Life And Operates Better Down To -20ã‚â°c Than Other Lithium-ion Technologies. 2-mode Operation Rotary Hammer Or Rotation Only For Maximum Versatility. Optimised Hammer Drilling Up To 6 - 10 Mm (max 13 Mm). 43 Mm Neck Size - Compatible With M12 De Dust Extractor. Flexible Battery System: Works With All Milwaukee M12 Redlithium-ion Batteries.

Designed To Give Protection Against Numerous Chemicals Including Alcohol, Petrol And Solvents. Liquidproof Gloves Made Of Nitrile Rubber. Cotton Flock-lining Over An Internal Layer Of White Nitrile Rubber. Curved Fingers And Contoured Palm. Guaranteed Silicone-free. Conform To The Fda (american Food And Drug Administration) Regulation For Food Contact.

S3 Hi Wr Hro Src. 200 Joules Protective Fibreglass Toecap And Composite Anti-penetration Flexi-midsole. Genuine Full Grain Waxy Smooth Leather. Waterproof And Breathable Activ-tex Membrane. Solid Rubber Outsole Resistant To 300ã‚â°c. Specialist Ladies Fitting. To En Iso 20345:2011.

Breathable Upper, Full Grain Oily Nubuck Leather With Textile Tongue And Collar. Moisture Wicking Textile. Lightweight Polycarbonate Toe Cap Resistant To 200j. Textile Pierce Resistant Midsole. Lightweight, Injected Dual Density Pu/pu Soling System With Anti-static Properties, Shock Absorption, Heat Resistance To 120ã‚â°c And Slip Resistance. Moisture Wicking, Breathable, And Washable Footbed.s3, Srcconforms To En Iso 20345:2011