Kennedy 125bw Duty Butane Soldering Iron
    Kennedy 125bw Duty Butane Soldering Iron.

    Piezo Self Ignition. Uses Standard Butane Lighter Fuel And Is Simple To Refill. Fully Djustable Tip Temperature Control With A Safety Fuel Cut-off When Cap Is Replaced. Textured Anti-slip Barrel With Built In Stand For Anti Roll. Supplied With Pointed Soldering Tip. Can Be Used With Single Flat, Double Flat, Hot Air, Hot Air Deflector And Hot Knife, Can Also Be Used As A Blow Torch. Supplied Without Fuel.



    Manufacturer: Kennedy
    ID: Bs125
    Category: Welding, Brazing , amp, Soldering , gt, Soldering , gt, Butane Soldering Tools
    SKU: Ken5169300k




Norton Saint Gobain R222 25mmx25m Al/ox Roll Grit 120
    Norton Saint Gobain R222 25mmx25m Al/ox Roll Grit 120.

    25mm X 25m Rolls.in A Useful Dispensing Pack With A Perforated Edge To Facilitate Cutting To Required Size, These High Quality Aluminium Oxide Rolls Are Ideal For A Range Of Hand-sanding Jobs Where Greater Flexibility Is Required.



    Manufacturer: Norton Saint Gobain
    ID: 63642531811
    Category: Abrasives , gt, Sanding , gt, Abrasive Rolls , amp, Strips
    SKU: Nor2012409j




Tuffsafe Polycotton Boiler Suit Royal Blue 36/38" Small
    Tuffsafe Polycotton Boiler Suit Royal Blue 36/38" Small.

    Comfortable Fit Suitable For Garage, Workshop, Service, Maintenance, General Diy And Many Other Applications. Hard Wearing. Concealed Press Studs. Chest Pockets, Side Pockets, Back Pocket And Lower Leg Pocket. Elasticated Waist. Easy Care And Higher Wash Rate Due To The Shrink Resistant And Colour Fade Resistant Polycotton Fabric. Machine Washable. Made From 80% Polyester, 20% Cotton. Available In Five Sizes From Small To Xxl.



    Manufacturer: Tuffsafe
    ID: Tff-962-5810a
    Category: Personal Protection , amp, Clothing , gt, Clothing , amp, Workwear , gt, Overalls , amp, Body Suits
    SKU: Tff9625810a




Skf 6303 Deep Groove Ball Bearing
    Skf 6303 Deep Groove Ball Bearing.

    Open Type Bearing Manufactured Without Seals To Allow For The Free Circulation Of Either Oil Or Grease. Widely Used In Transmissions, Gearboxes And Other Environments Where No Foreign Matter Would Be Present And A Lubricant Supply Is Available.



    Manufacturer: Skf
    ID: Crskf6701630d
    Category: Bearings , amp, Transmissions , gt, Bearings , gt, Deep Groove , gt, Open Type
    SKU: Skf6701630d




Sherwood 2.00mm Hss S/s Stub Drill
    Sherwood 2.00mm Hss S/s Stub Drill.

    Series S100 Hss Straight Shank Stub Drillsmetric Sizesgeneral Purpose Drills For Use On Automatics And Turret Lathes. Suitable For Drilling Steels, Cast Iron, Alloy Steel And Malleable Cast Iron. Point Angle: 118ã‚â°, Helix Angle: Normal, Web Thickness: Standard, Relief Angle: 10ã‚â° - 20ã‚â°, Tolerance Of Diameter: H8, Tolerance Of Shank: F11. Manufactured To Bsã¢â‚¬ë†328: Part 1: 1986/din 1897.



    Manufacturer: Sherwood
    ID: Crshr0251240x
    Category: Cutting Tools , gt, Hole Making , gt, Stub Drills , gt, Hss Stub
    SKU: Shr0251240x




Swisstech 5.0 Weldon Short 2fl B/no Se S/drill-tialn-8% Co
    Swisstech 5.0 Weldon Short 2fl B/no Se S/drill-tialn-8% Co.

    Series 11 - Short Series, Tialn Coateddimensions To Din 327. Centre Cutting. Weldon Shank To Din 1835b. Cutting Diameter To E8. Shank Diameter To H6.available In Hss-co 8% Uncoated (for General Production Machining), Hss-co 8% Ticn Coated (extends Cutter Life And Improves Work Material Surface Finish) And Hss-co 8% Tialn Coated (dissipates And Resists Heat, Reduces Surface Friction Coupled With High Surface Hardness).



    Manufacturer: Swisstech
    ID: Eq535050
    Category: Cutting Tools , gt, Milling , gt, Ball Nose , gt, Hss-co, B, n Slot Drills - Short Series
    SKU: Swt1631165a




Legamaster Universal Pin Board Grey 900x1200mm
    Legamaster Universal Pin Board Grey 900x1200mm.

    Notice Boards With Felt Surface And Aluminium Frame With Plastic Corner Caps. Boards Can Be Mounted Either Horizontally Or Vertically And Come Complete With All Fixing Materials. Available In Blue And Grey And In Two Sizes.



    Manufacturer: Legamaster
    ID: 1419-54
    Category: Office Supplies , amp, Stationery , gt, Conference , amp, Presentation , gt, Notice Boards , amp, Whiteboards
    SKU: Edd8360100k




Kennedy 230x3x22.23mm A24rbf Dpc Cutting Disc
    Kennedy 230x3x22.23mm A24rbf Dpc Cutting Disc.

    Type 42 Depressed Centre Cuttingfor Use With All Portable Grinders/cut-off Machines. Not To Be Used For 'free Hand' Cutting And Importantly Not To Be Used For Grinding.grade A24/a46 - For General Purpose Cutting On Metals.depressed Centre & Flat Reinforced Cutting & Grinding Discsall Kennedy Depressed Centre And Flat Reinforced Cutting Wheels Now Carry The â€å“osaã¢â‚¬ï¿¾ (the Organisation For The Safety Of Abrasiv Es) Mark Of Approval. â€å“osaã¢â‚¬ï¿¾ Is An Association Of The World's Leading Abrasives Manufacturers. In France, It Is Mandatory To Use Only Osa-certified Rough Grinding Wheels And Cutting Wheels. Similarly In Germany And Italy, It Is Strongly Recommended That Abrasive Products Conform To The Relevant En Standards. â€å“osaã¢â‚¬ï¿¾ Marked Products Are Guaranteed To Meet Or Exceed The Highest Worldwide Safety Standards, Including Those Of The Comite Europeen De Normalisation (cen), The European Standards Body That Issues En Standards, And Of Ansi In The Usa.



    Manufacturer: Kennedy
    ID: 1232015
    Category: Abrasives , gt, Cutting , amp, Grinding Discs , gt, Cutting
    SKU: Ken2304080k




Kobe Red Line 5,6 & 8mm Tile & Glass Drill Set 3-pce
    Kobe Red Line 5,6 & 8mm Tile & Glass Drill Set 3-pce.

    Three Piece Drill Bit Set For Drilling Through Glass, Tiles, Mirrors And Ceramics. Contents: 5, 6 And 8mm.



    Manufacturer: Kobe Red Line
    ID: Kbe-280-7560k
    Category: Cutting Tools , gt, Hole Making , gt, Drill Sets , gt, Masonary Drill Sets
    SKU: Kbe2807560k




Iwis 10b -2 Connecting Link - British Standard
    Iwis 10b -2 Connecting Link - British Standard.

    High-performance Roller Chains For Every Application. Elite Roller Chains Boast A Long Lifespan And A Significantly Greater Fatigue Strength Than Required By The Relevant Standard. All Elite Transmission Roller Chains Are Highly Prestretched And Elidur, A Synthetic Chain Oil, Is Applied As Initial Lubricant.asa Chains Are Available For Applications With Extremely High Loads, As Are Strengthened Versions Of Chains Manufactured According To The European Standard. Chains In Our H, Hv And Hsp Series Have The Same Dimensions As The Corresponding Asa Chains, But Their Plates Are As Thick As The Next Larger Size Of Chain. Connecting Links



    Manufacturer: Iwis
    ID: 10b-2 Elite
    Category: Bearings , amp, Transmissions , gt, Roller Chains , gt, Duplex Chain
    SKU: Iws6901040g




Kimberly Clark Professional 6667 Scott Hand Towels White (6-rolls)
    Kimberly Clark Professional 6667 Scott Hand Towels White (6-rolls).

    Scott 6667white Hand Towel Rolls Manufactured From 1-ply Highly Absorbent Airflex* Material. Large High Capacity Rolls, Ideal For High Traffic Washrooms.colour: White.contents: 6 Rolls. Sheet Width: 200mm. Roll Length: 304m.



    Manufacturer: Kimberly Clark Professional
    ID: 6667
    Category: Cleaning , amp, Hygiene , gt, Hand Towels, Tissues And Toilet Rolls , gt, Hand Towels
    SKU: Kim9526667k




Avon 75mmx66m Low Noise Polypropylene Tape 35mu Buff
    Avon 75mmx66m Low Noise Polypropylene Tape 35mu Buff.

    Slow And Almost Silent Release Characteristics. Difficult To Tear Using Just Fingertips. For Most Of All Results Use In A Dispenser Fitted With A Brake. Roll Sizes: 48mm X 66m. 28 Microns.75mm X 66m. 35 Microns.



    Manufacturer: Avon
    ID: Bln75
    Category: Adhesives , amp, Sealants , gt, Adhesive Tapes , gt, Packaging Tapes
    SKU: Avn9815040k




Qualfast St4.2x16mm Self-drill Hex Head Washer Screw Bzp - Pack Of 1000
    Qualfast St4.2x16mm Self-drill Hex Head Washer Screw Bzp - Pack Of 1000.

    Qualfast Qualfast St4.2x16mm Self-drill Hex Head Washer Screw Bzp - Pack Of 1000 Fasteners > Screws > Self Drilling Screws



    Manufacturer: Qualfast
    ID: 31815.042.016
    Category: Fasteners , gt, Screws , gt, Self Drilling Screws
    SKU: Qft6360708f




3m 4411n Extreme Sealing Tape 38mm X 5m Neutral
    3m 4411n Extreme Sealing Tape 38mm X 5m Neutral.

    4411npressure Sensitive Adhesive Tape Designed For Many Different Sealing Applications. The Backing On This Tape Is An Ionomer Film That Is Very Tough Yet Flexible And Abrasion Resistant. Bonds To Many Metals And Plastics. Fastens To Contours, Edges, Rivets And Screw Heads For A Water Tight Seal. Flexibility Allows For Enduring Vibration And Thermal Expansion/contraction.size: 38mm X 5m.



    ID: 7000049755
    Category: Adhesives , amp, Sealants , gt, Adhesive Tapes , gt, Duct , amp, Waterproof Tapes
    SKU: Mmm9811271k




Moore & Wright 310 12"/300mm Engineers Straight Edge
    Moore & Wright 310 12"/300mm Engineers Straight Edge.

    Type 310 Finish Ground On Both Sides And Edges Marked At Supporting Points On The 36" Size And Longer. Product Number Suffixed 'b' Indicates One Edge Has A 30 Bevel. Conforms To Bs 5204 - B



    Manufacturer: Moore & Wright
    ID: 31012
    Category: Measuring , amp, Test Equipment , gt, Non-mevhanical Gauges , gt, Rules , amp, Direct Reading Gauges , gt, Squares , amp, Straight Edges
    SKU: M&w5531224n




Pcl Bgn466 230mm Extension Nozzle
    Pcl Bgn466 230mm Extension Nozzle.

    Suitable For Use With Both Standard And Plastic Blow Guns. Allows A Greater Distance From A Workpiece.



    Manufacturer: Pcl
    ID: Bgn466
    Category: Power Tools , gt, Air Tool Accessories , gt, Blow Gun Acceessories
    SKU: Pcl2592466k




3m Dp460 Scotchweld Adhesive 50ml
    3m Dp460 Scotchweld Adhesive 50ml.

    Scotch-weld Epoxy Adhesive Dp460 Off-white Is A High Perform Ance, 2-part Epoxy Adhesive Offering Outstanding Shear And Peel Adhesion, And Very High Levels Of Durability. The Features Of This Adhesive Include High Shear Strength, Controlled Flow, High Peel Strength, 60 Minute Worklife, Outstandiing Environmental Performance And Easy Mixing.adhesive Family: Epoxy.work Life: 60 Mins.time To Handling Strength: 241 - 300mins.full Cure (days): 5.cartridge Size: 50ml.



    ID: 7000080078
    Category: Adhesves , amp, Sealants , gt, Structural Adhesives
    SKU: Mmm7057170b




Cotswold 40x40cm Economy Green Microfibre Cloth 36g
    Cotswold 40x40cm Economy Green Microfibre Cloth 36g.

    Multi-purpose Microfibre Cloths That Can Be Used Dry, Dampened With Water Or Cleanser. Non-abrasive.colours: Green, Pink, Yellow And Blue.size: 40 X 40cm.



    Manufacturer: Cotswold
    ID: Migc40aqp
    Category: Cleaning , amp, Hygiene , gt, Cleaning Hardware , gt, General And Industrial Cleaning Cloths And Wipes , gt, General Purpose Cloths
    SKU: Cot9076964k




Vending Cup Holders (pk-12)
    Vending Cup Holders (pk-12).

    To Prevent Scalding From Hot Drinks. Suitable For Use With Tall And Squat Plastic Cups. Supplied As A Box Of 12 Individual Holders.



    ID: Ry0308
    Category: Catering Supplies , amp, Appliances , gt, Tableware , gt, Disposable Tableware , gt, Disposable Cups And Lids
    SKU: Ctl7880350k




Multi-purpose Battery Tester
    Multi-purpose Battery Tester.

    Mw333a Versatile Battery Checker For Testing More Than 12 Types Of Batteries Including Aaa, Aa, C, D, 9v, Cr123a, Cr2, Cr-v3, 2cr5, Cr-p2, Button Cells Or Other Batteries With The Same Voltage. N.b. Batteries Not Included.



    ID: Tst0302
    Category: Office Supplies , amp, Stationery , gt, Batteries , amp, Chargers , gt, Battery Chargers
    SKU: Ctl9040009a




Smc As1301f-m5-06 Speed Controller
    Smc As1301f-m5-06 Speed Controller.

    As Series Speed Controllers With One-touch Fittings Minimise Installation Time And Cost As They Reduce The Mounting Height And Enable Compact Machinery Design. 10 Needle Rotations Permit Easy Control At Low Speeds. Accepts Nylon, And Polyurethane Tubing In A Variety Of Sizes. Operating Pressure: 1mpa Max. Operating Temperature Range -5 To 60ã‚â°c. Flow - Uni-directional.



    Manufacturer: Smc
    ID: As1301f-m5-06
    Category: Fluid Power , gt, Pneumatic Fittings , gt, Speed Controllers
    SKU: Smc2948030r




Skf 6210-2rs1/c3 Deep Groove Ball Bearing
    Skf 6210-2rs1/c3 Deep Groove Ball Bearing.

    Deep Groove Metric Ball Bearings - Sealedsealed (2rs1) Bearings Are Fitted With Two Synthetic Rubber Seals To Prevent Leakage Of Lubricant And Entry Of Dust, Water And Other Harmful Material.features And Benefits:the Seals Are Made From An Oil And Wear-resistant Synthetic Rubber With A Steel Reinforcementoperating Temperature From -40ã‚â°c To +120ã‚â°caccepts Radial And Axial Loadsboth Standard And C3 Clearance Availableversatileapplication Information:deep Groove Ball Bearings Are Suitable For High Speeds And Are Robust In Operation



    Manufacturer: Skf
    ID: Crskf6701771a
    Category: Bearings , amp, Transmissions , gt, Bearings , gt, Deep Groove , gt, Sealed Type
    SKU: Skf6701771a




Ejendals 733 Tegera Fully Coated Blue/grey Gloves - Size 10
    Ejendals 733 Tegera Fully Coated Blue/grey Gloves - Size 10.

    An Elastic Glove In Nylon Which Is Fully Dipped In Nitrile Rubber For Complete Protection. The Roughened Grip Provides The Glove With Excellent Gripping Ability As Well As Good Protection Against Wear And Tear And Punctures. The Glove Is Also Very Flexible And Provides First-rate Fingertip Sensitivity. It Is Ideal For Assembly Work And Workshops Where You Come Into Contact With Liquids And Oils. Machine Washable At 40c.conforms To En388 - 4.1.2.1. Cat 2.



    Manufacturer: Ejendals
    ID: Creje9614688f
    Category: Personal Protection , amp, Clothing , gt, Hand , amp, Arm Protection , gt, Gloves , gt, Mechanical Hazard Gloves
    SKU: Eje9614688f




Drmartens 112sm Men's Black Safety Boots - Size 12
    Drmartens 112sm Men's Black Safety Boots - Size 12.

    Airwair Cushioned Sole. 200 Joules Steel Toe Cap Impact Protection. Guards Against Falling Objects And Collisions. Steel Midsole To Prevent Sharp Object Penetration. Ideally Suited To Building Sites And Where Metal Swarf Is Present On Floors. Oil, Petrol, Water, Acid And Alkali Resistant. Resists The Build-up And Conductance Of Static Electricity. Of Most Benefit When Walking On Synthetic Carpets Or Near Electrical Machinery. Normally Allows Walking On Hot Surfaces Up To 70ã‚â°c.s1p Classified. Manufactured To En Iso 20345:2011.



    Manufacturer: Drmartens
    ID: 6656
    Category: Personal Protection , amp, Clothing , gt, Footwear , gt, Safety Boots , gt, Metal Safety Boots
    SKU: Doc9637412k




Moore & Wright 132 Precision Imperial Feeler Gauge
    Moore & Wright 132 Precision Imperial Feeler Gauge.

    All Blades Are Hardened, Tempered And Polished.nominal Thickness Marked On Each Blade.range: 0.0015-0.025".number Of Blades: 10.width: 0.5".manufactured To: Din2275.



    Manufacturer: Moore & Wright
    ID: 132
    Category: Measuring , amp, Test Equipment , gt, Non-mechanical Gauges , gt, Rules , amp, Direct Reading Gauges , gt, Feeler Gauges
    SKU: M&w5531200a






Brake | Steering | Auto | Ignition | Belts | Engine | Fuel | Vehicle

Copyright © 2024 MotorHolder.com All rights reserved.
With any using link to MotorHolder.com strongly required.