Sv12sg Contoured Body And Soft Grip For Greater Operator Comfort And Ease Of Use. High Dust Extraction Rate. Low Vibration Design. Power Input: 200w.orbits Per Minute: 14,000/min. Pad Size: 110 X 100mm. Orbit Diameter: 1.5mm. Overall Length: 137mm. Supplied With: Punch Plate, Dust Bag, Sanding Paper.

Poa500penetrating Oil For Dismantling, Lubricating And Cleaning. This Oil Displaces Water Leaving A Hydrophobic Coating To Protect Surfaces From Corrosion. It Penetrates Threads And Crevices To Release And Lubricate Delicate Mechanisms, Pivot Points And Sliding Surfaces Whilst Degreasing Hard Surfaces.size: 500ml.

High Cut Resistant Yarn With A Leather Palm And Liquid Barrier. A Liquid Resistant Membrane Keeps Hands Dry In Wet Working Conditions. Handling: The Leather Palm Provides Excellent Grip In Wet Or Oily Conditions.

Fast Reliable Method For Visually Inspecting And Spot-checking Surfaces Of Welds, Exotic Alloys Or Standard Metals, Highly Stressed Sstructural Members, Critical Castings, Shafts, Gears, Spindles, And Any Other Hard Part Where Identification Of Surface Flaws Is Essential. Detects Flaws Such As Cracks, Pin Holes, Welding Laps And Porousness Either During Manufacture Or On Site. A Three Part System. Sfd-501c Is A Cleaner. Sfd-502c Is A Dye Penetrant. Sfd-503c Is A Developing Fluid That Reacts With The Dye In Sfd-502c To Show Small Cracks In The Weld. Each Part Supplied In An Ozone Friendly 500ml Aerosol.flaw Detector Cleaner Spraysf1-500bquick Drying, Powerful Solvent For Cleaning Surfaces Prior To Testing. Removes Contaminants Including Oils, Greases And Grime.size: 500ml.

Uses Top Clamping Triangular Inserts To Produce A 90 Shoulder At The Edge Of A Milled Face. This Is Of Major Benefit When Taking A Number Of Cuts Across A Face As The Shoulder Produced Is Without Steps.

Gy Inserts To Suit External Face And Internal Grooving Holders.a Full Range Of Insert Widths From 2mm To 6.35mm Are Available On Request.

Double Faced Sledge Hammers Are Fully Forged And Heat-treated. Ideal For Use On Spikes, Stakes, Cold Chisels And Hardened Nails. They Are Available With A Hickory Or Fibreglass Shaft.hickory Shaftwith Fine Grain, Forged Steel Head, Hardened And Tempered With Polished Faces.

Nvm4b - Replacement Dust Bags For Wv 750 / Wvd950 Wet / Dry Vacuum Cleaners.pack Quantity: 10

Designed To Give Maximum Grip Within Channels Or Slots. Able To Grip Non-uniform Workpieces.

Non-metallic Protection Kevlar Composite Toe Cap And Sole Plate. For Working In Areas Where Security Screening Is A Necessity. 200 Joules Impact Protection. Normally Allows Walking On Hot Surfaces Up To 300ã‚â°c. Dual Density Polyurethane/rubber Soles For Extra Comfort. The Sole Features A Nitrile Rubber Outsole, Resistant To Heat To 300ã‚â° And A Low Density Polyurethane Interlayer, For Increased Comfort And Shock Absorption. Lightweight. Polyurethane Soles With Breathable Leather Upper, Eva/rb Outsole. Reduces Fatigue During Extended Wear. Water Penetration And Absorption Resistant. Helps Keep Feet Dry In Wet Conditions.s1p Classified.manufactured To En Iso 20345:2004/a1 2007.

Type Nc (american National Coarse).m2, Straight Shank, Oxide Surface Treatemnt Reducing Cold Welding And Enables The Surface To Absorb Lubricant, Suitable For Use On Ferrous Materials. Designed For Machine Tapping Of Blind Holes. Helix Angle Directs Swarf Along The Flute And Out Of The Hole. To Ansi B94.9 (1987)

3886bclong Reach Tubular Steel Handle With Contoured Grip, Flat Tooth Head. Teeth: 16 Flat.head Size: 80 X 475mm.shaft Length: 1750mm.

Moulded Disposable Mask. Class 2, Medium Efficiency (94%) With A Protection Factor Of 10. Conforms To En149:2001+a1:2009.ffp2. Valved.

Poly/cotton Mix. Knitted Wrist. Multi-purpose Handling Gloves.cat I

General Purpose Contractors Shovel For Digging Out And Refilling Trenches, Mixing Concrete And Moving Tarmac. All Blades Are Hardened And Tempered With An Epoxy Coating.s14112type: Solid Socket. Handle Type: T Wooden. Shaft: Hardwood. Blade Material: Carbon-manganese Steel.blade Size: (w)240mm X (h)300mm.overall Length: 985mm.

Suitable For Use In Areas Of Restricted Access, I.e. Close To A Wall.

Curved Mirror For Wide Angle Viewing. Essential Where Fork Lifts Are Used. Provides 180ã‚â° Rearward Vision. Fits Under The Overhead Canopy. Manufactured From Scratch And Shatter Resistant Lightweight Acrylic.

Trend Trendiwax Lubricant Wax Stick 342gm Extends Sawblade Life By Keeping Blade Cool At Cutting Points.for Use When Sawing Aluminium.use At Regular Intervals.apply Directly Onto The Teeth Of A Stationary Blade.trendiwax Is A Low Melting Point Solid Lubricant For Direct Application To Metal Cutting Tools, Including Saw Blades And Drills.packed In A Convenient Push Up Tubular Dispenser.unlike Flood And Spray Coolant Systems, Trendiwax Does Not Splash Or Require Extraction.excellent Lubrication When Sawing Or Machining Aluminium, Including Anodised Extrusions With Minimum Subsequent Cleaning Up.

Strong, Lightweight Disposable Gloves. Good Puncture Resistance. Comfortable To Wear. Unique Formulation. Beaded Cuff With Ambidextrous Fit. Ideal For Laboratory, Pharmaceutical And Food Preparation Industries. Ce - For Minimal Risk Only.

Manufactured From High Impact Polystyrene. Radiused Corners And Sloping Sides For Complete Sample Transfer. Hydrophobic Surface Ensures No Absorption Of Water From Atmosphere Or Sample. Flat Base For A Secure, Firm Rest On The Balance Pan. Choice Of Standard Or Antistatic Boats. Flexible To Allow The Formation Of A Funnel For Easy Pouring To Another Vessel. Suitable For Coloured Powders And Samples. Sterility: (ns) Non Sterile.

Manufactured From Carefully Graded Abrasive Particles, Mixed With The Appropriate Bonding Agents And Fired In Electric Or Gas Ovens To Produce A Stone Suitable For Roughing Out Cavities And Dies To Commercial Finishes.hyprez Edm Hard/aluminium Oxide Pencil Type Length: 150mm.

New Magnetic Whiteboards Have A Durable, Easy Clean Surface And Smart Aluminium Trim. Includes Pen Tray And Wall Fixings. Available In Two Sizes.5 Year Guarantee.

Trigger Switch For Gst 24v Jigsaw (bch-266-7393e)gsb 18 Ve2 Cordless Drill (bch-266-7303c)gsb 24 Ve2 Cordless Drill (bch-266-7304d)

Hbmfsrcã¢â‚¬â¢ Metal Free â€⢠Polyurethane Sole With Black Suede Leather Upper.ã¢â‚¬â¢ 200j Composite Toecapã¢â‚¬â¢ Kevlar Midsoleã¢â‚¬â¢ Full Length Footbedã¢â‚¬â¢ S1pen Iso 20345

Alphatec 58-128light Duty Chemical Protection With A Thin Nitrile Barrier That Provides Superior Hand Protection Against Irritant Contact Fluids. The Ansell Grip Technology Offers More Precise Handling And Optimal Flexibility Of Small Oily Or Wet Parts. The Design Combines A Flexible Open Weave Knit Liner And Stretchy Nitrile Formulation Coating For Better Dexterity, Tactility And Comfort. Overall Length 28cm.cat Iiiceen374en374en388:2003 X121