11mm Head Diameter. Colour: Brass.pack Quantity: 150.

Sm - Abs Plastic Body Retractable Removable Rear Body With Blade Snapping Slot Allows Access To Blade Carrier For Spare Blade Storage. Multi-position Slide Button.0-10-1509 X 85mm, 13 Segment Blade.

Vnmg Turning Inserts35ã‚â° Rhombic Insertinsert Grades Qx530 (iso P20-p40 M20-m30) Coated. Turning Grade For Steels, Cast Steels And Stainless Steels. A Good General Purpose Steel Grade For Roughing.chip Breaker: Nfi. Application: Finish.

Semi-flexible Abrasive Coated Sponge. The Different Surface Angles Allow Awkwardly Contoured Wooden Sur Faces To Be Easily Sanded. Available In Two Different Grades. Size: 97 X 45/70 X 21mm.

Perfect For Sheet Metal, Pipes And Plastic Where A Clean, Burr-free Holes Is Required. Mini Cutters Produce Holes By Removing A 'centre Disc' And Have Precision Ground Teeth And Flutes To Rapidly Remove Waste Material, So They Are Fast, Smooth And Highly Accurate. The Highly Efficient Cutting Action Ensurss Minimal Burring On Breakthrough, Reducing Or Completely Eliminating The Need For Additional Finishing Work. Size 6-20mm: 6.4mm Cutting Depth Size 21mm+: 12mm Cutting Deptharbor Required

Record Visitors Details, Name, Date, Company, Car Registration, Visiting Badge Number, Time In And Out. 2000 Entries Per Binder. Black Padded Binder With Contrasting Quarter Bound Spine. Loose Leaf Sheets With Reinforced Punched Holes.

Industrial Reversible/double-ended Adjustableused For The Removal Of Gears, Ball Races, Bearings, Pulleys And Sprockets From A Drive Shaft. With Reach Capacities Of 75mm, 100mm, 150mm And 200mm. All Sizes Have Double-ended, Adjustable, Reversible Legs And Can Be Used For Internal And External Applications. Selection: Always Use A Three Jaw Puller Whenever Possible. This Produces Better Load Distribution Across The Jaws And Easier And Safer Removal Of The Part. Determine What 'spread' Is Needed - This Is The Width Of The Part To Be Removed. The Reach Capacity Is Determined By The Depth Of The Part To Be Removed.all Pullers Can Be Assembled For Internal Or External Use.2 Jaw Pullers - Supplied With Both 2-legged Yoke2 Jaw -internal Assembly2 Jaw -external Assembly

Ultra-lightweight Nitrile Dual Coated Grip Gloves Designed To Provide Comfort, Grip And Protection In Oily And Dirty Precision Handling Tasks.conforms To En 388 4121.cat Ii

Used For The Marking Out Of Fine Lines On Metals. Manufactured From Hardened And Tempered High Grade Steel With Knurled Bodies For High Grip And Precision Ground Points For Accurate Marking. Available With A Chisel Point, Pocket Type, Machinist's Standard Type, Double Ended, Which Are Mainly Used In Conjunction With Surface Gauges.chisel Point & Scrapermachinists Scriber With Scraper. Double Ended. Ideal For Cleaning Surfaces Prior To Marking Out. With Chisel Point.overall Length: 180mm.

Low Strength For Stainless Steel Fittings And Pipework. High Lubricity Prevents Galling.slow Cure, Use With Activator 7649.tolerates Minor Surface Contaminations From Various Oils, Such As Cutting, Lubrication, Anti-corrosion And Protection Fluids.maximum Pipe Size: 2 In. Comment: For Stainless Steel Coarse Threads, Low Strength.

Manufactured From Natural Split Leather. 90mm Tapered Pouch With A 40 X 25mm Opening. Fully Riveted Construction. Two Slots For Belt Attachment. Belt Not Included.

Coromill R390 Milling Inserts Inserts For Coromill 390 Insert Grade 4240p40 (p35 - P50)m40 (m30 - M40)k40 (k30 - K40). Coated Carbide Grade For Toughness Demanding Operation In Steel Milling. For Cm390concept It Should Be Used In More Stable Conditions Such As Short Overhang, Face Milling, Shallow Shoulder Milling Etc. Works Well With Or Without Coolant.

Scratch Resistant Polycarbonate Replacement Lenses To Suit Kennedy Safety Spectacles Ken-960-1110k/1150k.

Sapp0058aconcentrated High Performance Frmula. Offers Outstanding Value - Up To 66 Washes Per Litre. Removes Stubborn Dirt, Grime, And Other Harmful Deposits. Leaves A Streak-free Protective Layer Of Simoniz Wax. Foams Instantly In Hard Or Soft Water.size: 1ltr.

With Spring Blade Return. Self-adjusting Hook For Internal And External Reading. Metric And Inch Readings. Abs Casing. End Hook Has Two Rivets, Graduated With 1/32ã¢â‚¬ï¿¾, 1/16ã¢â‚¬ï¿¾ And Mm.

Polished And Ground Stainless Steel Prongs With Deep Sockets And Swan Neck For Improved Strength. Bend Resistant. Polypropylene 'yd' Handles And Shafts.border - Fbs140suitable For Use In Confined Areas Of The Garden.blade Width: 140mm. Overall Length: 910mm.

Seamless Nylon Micro Dot Assembly Gloves Offer The Ultimate Combination Of Sensitivity And Dexterity, Which Is Great If You're Working On Small Scale, Complex Tasks. Conforms To En 388. Single Filament Nylon. Black Pvc Dot. Pvc Dot Palm. Lint Free. Enhanced Grip. Washable.

Sandvik Cbn Inserts Are For Hard Part Turning, Cbn Inserts Are Your First Choice For Turning High Quality Steel Surfaces In The Hardness Range 58-65 Hrc.features & Benefits:iso Inserts To Fit Existing Toolholders.multi Point 4 - 6 Edges/inserts For Best Economy.ex Stock Availability (next Day Delivery).3 Grade Choices From Heavy Intermittent Machining To Clean Surfaces.total Range Available For All Applications.6 Negative Style Inserts.5 Positive Style Inserts.minimum Bore 10mm Diameter Capability.rigid Clamp Holders For Maximum Insert Clamping Stability.

Stokolan Classic Is A Silicone-free Skin Care Cream Which Is Easy To Apply, Is Swiftly Absorbed And Does Not Leave Any Unpleasant Or Annoying Oily Film. Stokolan Classic Has A Proven Track Record In Helping To Prevent Occupational Skin Diseases And In Supporting Their Treatment.stokolan Classic Contributes To Reducing Skin Irritations And It Soothes The Skin. By Simultaneously Providing Moisture And Oils, Stokolan Classic Enhances The Natural Regeneration Of The Skin, And Used Regularly, It Keeps The Skin Smooth And Supple. This Helps To Stop The Skin Becoming Rough Or Dry - Which Is The Cause Of Many Occupational Diseases And It Maintains The Natural Protective Function Of The Skin.

107402336to Suit The Nilfisk Alto Model Multi 20cr Wet & Dry Vacuum Cleaner.

Geometry Because Of Thin Wall (up To 6mm Thick) And I Beam Steel Plate Applications.tiain Coating, For Good Heat Resistance, Ideal For Minimal Coolant Applications.

Made From Polyester Plated With Cotton, Tiger Paw Offers Many Features And Benefits At An Economical Price. This Heavier Construction Ensures A More Robust Glove For Heavier Applications.

Counterbores H With A Diameter Of 50mm And Larger Are All Made With A Driving Lip. These Sizes Should Be Used In The Appropriate Type M Toolholder.dimensions (mm) H & Hacounterbores H And Ha With Ãƒëœ Of 50 Mm And Larger Are All Made With A Driving Lip. These Sizes Should Be Used In The Appropriate Type M Toolholder.d: 14.0; D1: 6.0; D2: 8.0; L: 48.0; L1: 28.0.

Specifically Designed For Sheet-fed Laser Printers. Suitable For Use On Envelopes And Parcels. For Filing Office Equipment, Price And Product Labelling Etc.ã¢â‚¬â¢ Superior Print Qualityã¢â‚¬â¢ All Round Selvedgeã¢â‚¬â¢ Low Chlorine Face And Backing Paperã¢â‚¬â¢ Strong Water-based Adhesiveã¢â‚¬â¢ Matt Finishã¢â‚¬â¢ Supplied On A4 Sheetsã¢â‚¬â¢ Paper Weight: 121g/mã‚â³ã¢â‚¬â¢ Sold Per Box Of 100 Sheets

Wrapmaster 3000 Dispenser Wrapmaster 4500 Dispenser Wrapmaster 1000 Dispenser