For Use In Jalas Protective Footwear. Soft Eva Polyester Based Electro Conductive Thread. Control Bar In Tpu (high/medium) Or Rigid Eva (low), Double Shock Absorption Zones In Poronxrd. These Insoles Provide A Perfect Fit, Breathability Comfort And Excellent Shock Absoption.8710m Medium Arch Support

Efficient Absorption And Wet-strong Quality. Decor Embossing. Use With H1 Dispensers.roll Length: 150m. Roll Width: 21.0cm. Diameter: 19.0cm. 290067 - White. 2-ply.290068 - Blue. 2-ply.290076 - Green. 2-ply.

Sandvik Coromill Face Mills & End Are The First Cutter To Give A True 90 Cut Without Sharp Edges Or Steps; This Allows Cusp Heights Of 0.03mm, Showing No Discernible Cusp On A Smooth Surface. This Is Possible Because Of The Plus/minus 10-20' Angular Accuracy, Compared With Plus/minus30' With Less Advanced Technology. Coromill 490 Is Available For Diameters Of 25 - 80mm, With Arbor, Cylindrical And Weldon Shanks; With L And M Pitch And In Metric And Inch. The Complete Coromill 490 Range Will Cover 25 - 125mm. Coromill 490 Is Available In P-geometries And Later In M And K. Roughness Applications L, M And H Are Available. The Radius Is 0.4 - 1.6mm

A Range Of Pressed Steel Castors Affording Protection To Floor Surface And Load. 200mm Castors Have Ribbed Tread Style. 260mm Castors Have Patterned Tread.popular Pneumatic Tyred Wheels With Plastic Centres.

Fixed Head Ratchet That Extends To 397mm And Can Be Adjusted With One Hand. The Ratchet Is Locked At The Desired Length By A Ball Mechanism, Specially Designed Not To Change Length When Locked. The Long Plastic Handle Features A Hook At The End For Hanging, Which Is Ideal For When Working At Height Or In Awkward Situations.drive: 1/2in Squarelength: 264-397mm (extendable)head Height: 37mmhead Diameter: 38mmweight: 720g

1-10-189 Spring Backas 99e, Die Cast Except With Spring-loaded Steel Slide Mechanism.

290gsm, Three Layer Construction With 10,000/3,000 Breathable Waterproof Membrane. Contrast Trim Sleeves. Two Side Zipped Pockets. One Chest Zippedpocket. One Zipped Arm Pocket.

Long Serieshss-co, 4 Flute Weldon Shank Finishing End Mills With Ticn Coating.available In:6mm: Flute Length 24mm. Shank Dia 6mm.8mm: Flute Length 38mm. Shank Dia 10mm.10mm: Flute Length 45mm. Shank Dia 10mm.12mm: Flute Length 53mm. Shank Dia 12mm.16mm: Flute Length 75mm. Shank Dia 16mm.20mm: Flute Length 75mm. Shank Dia 20mm.

Rapid Bonding Of Rubbers And Elastomers. Use With Primer 770 For Pp, Pe, Delrin.gap Fill: 0.05mm.colour: Clear. Temperature: -40 To +120ã‚â°c.comment: Plastics And Rubber, Low Viscosity.

No Load Speed: 0 - 400/1,300rpm. Blows Per Minute: 600/19,500bpm. Max. Drilling Capacities: Steel 10mm, Wood 25mm, Masonry 10mm. Max. Woodscrew: No.14.batteries: 8281dwpe - 2x 1.3ah Ni-cad.8281dwpe3 - 3x 1.3ah Ni-cad.*naked Tool Only

Series 146satin Chrome Finished Frame. Designed For Measuring Grooves, Recesses And Shoulders Located Inside A Bore. They Measure Not Only Thickness And Spacing Of Grooves, But Also Measure From An Edge To A Land, Or From Shoulder To Groove. Spindle Hardened And Precision Ground, With Micro-lap Finish On Measuring Face. Every Thousandth Is Numbered For Easy Reading. To Measure: Width Of Groove, Width Of Land. To Determine: Location Of Groove, Depth Of Bottom Of Groove. Accuracy: Parallelism: 10ã‚âµm. Instrument Error: Ââ±10ã‚âµm.metric - Graduation: 0.01mm

Sekn Milling Insertssquare Insert Insert Grade Qm3535(p0-p35) Pvd Tiain Coated For Milling Of Steel. Comprehensive Grade Which Covers Wide Application Range Due To Substrate Providing Optimal Wear Resistance And Toughness.

All The Qualities Of Polyfilla In A Quick Drying Format. Handy For Small Last Minute Repairs. Surfacce Dry And Ready To Paint From Five Minutes.

Designed To Protect The Wearer From Eye Injury Against Moderate Unspecified Mechanical Impact Hazards. Anti-dust And Impact Resistant. Direct Ventilation.

Sd1-500bthe Molybdenum Disulphide Lubricant Particles Are One Micron Or Less In Size Allowing The Product To Adhere In The Smallest Surface Irregularities. Immovable Drying At Room Temperature, The Dry Coating Can Be Polished If Required, To A High Shine Providing Micro Coating Of Lubricant For Slides, Bearings, Chutes And Conveyors. The Dry Film Is Resistant To Pick Up And Resists The Accumulation Of Debris. Ideal For Fastener Lubrication Where It Will Prevent Galling, Particularly On Stainless Steel. Effective On Foundry Equipment Where High Temperatures Up To 450ã‚â°c Are Common. Also Suitable For Open Gear Lubrication And Any Location Where A Wet Coating Is Not Acceptable Or Would Burn Off. Provides Lubrication At Extremely High Load Rates Up To 100,000psi. Suitable For All Steels, Copper, And Brass Components. No Silicone Content.size: 500ml.

Adapters For Face Grooving And Turning In The 25-400mm Diameter Range. Part Of The Modular-grip System. Designation : Hfpad 3r-115-t18 F(a)=f1(shank) + F2(adapter)hgn & Grip 3.. Inserts Can Be Used Only With Right-hand Adapters, Hgpl 3.. Inserts With Left-hand Adapters.

Zinc-plated, Self-adjusting Telescopic Suction Tube. Comfortable Lever Grip. Suitable For Lubricants And Non-corrosive Liquids. Suitable For Container Sizes 60 And 200ltr. Tube Length 480 - 900mm. For Use With Bsp And Metric Threaded Barrels.

Spet Milling Insertssquare Insertinsert Grade Kc725m(iso M15-m35, P15-p35, K15-k35) A Multi-layer Tialn Pvd Coating With A Tough 11.5% Cobalt Substrate. General Purpose Medium-speed Grade For Steels. Good Resistance To Thermal Shock. Suitable For Wet And Dry Machining Applications. Speedrange: 300 - 650 Sfm On Steel Materials; 200 - 500 Sfm On Stainless Steel Materials.

Straight Cutcuts Straight, Left Or Right. Non-slip Serrated Jaws Are Made Of Wear-resistant Molybdenum Steel With A Compound Lever Action To Provide Extra Strength. Cuts Low Carbon Cold Rolled Steel. Self-opening Action For Fast, Effortless Feed, With A Built In Convenient, Protective Safety Latch.

Lightweight Check Pattern Cotton Tea Towels In Assorted Colours. Suitable For All Catering Applications. Pack Quantity: 10.towel Size: 430 X 680mm (17" X 27").

28516features An Alloy Steel Curved-throttle Lever With Built-in Wrist Support, 3m Gripping Material Molded Into The Interchangeable Comfort Grip, Conveniently Located Speed Control Dial, And Internal Muffler. Precision Balanced For Smooth Operation. Takes Dust Management To The Next Level With Powerful Self-generated Vacuum Tools. Features 3m Proprietary Clean Sanding System With Improved Filter Bag. Newly Designed Wrist Rest For More Support. Recessed Level Eliminates Pinch Points. Composite Cover To Prevent Crack Housings. Improved Access To Air Fittings.improved Dust Collection Port. 3m Hookit Clean Sanding Disc Pad, Filter Bag Adaptor And Clean Sanding Filter Bag Included.airflow Rate Scfm (lpm): 17 (481).dimensions (h X L): 92.6 X 245mm. Max. Opm: 10,000.max. Speed: 12,000rpm.motor: 0.28hp.orbit Diameter: 3/16" (5mm).tool Diameter: 6" (152mm).

Series 3port: 1/4.type Of Construction: With Spool.media: Filtered Air Without Lubrication.

Tubular Steel Frame With Plastic Non-slip Treads, Non-slip Feet And Black Foam Rubber Handle.manufactured And Approved To The Recognised European Gs Standard.images Are For Illustration Purposes Only

This 235mm Circular Saw Is A Well-balanced And Powerful Tool Suitable For Cutting Large Timbers. The Saw Includes An Adjustable Mitr Angle For Extra Precision, Along With A Riving Knife And Spindle Lock Forr Additional Safety. The 24t Tct Blade Cuts To An Impressive Depth Of 86mm, And Can Be Angled Up To 45ã‚â°. The Steel Base And Aluminium Guard Mean That The Tool Is Durable And Robust Yet Lightweight. A Rip Fence Is Included To Ensure Straight Cuts And The Saw's Built-in Soft-start Technology Protects It From Excess Voltage During Start-up.

Cablelink Plus Modular Floorboxes Have Been Specifically Engineered To Ensure Robustness, A Faster Installation And Maximum Life Span Flexibility.