A117 Hss-co Straight Shank Heavy Duty Stub Drillsmetric Excellent For Drilling Higher Tensile, Tougher Materials 135ã‚â° Split Point For Improved Precision And Finish (over 1.5mm). Manufactured To Din1897.

Iconic Safety Boots With Steel Midsole, To Prevent Sharp Object Penetration. 200 Joules Steel Toe Cap Impact Protection. Guards Against Falling Objectsa Nd Collisions. Ideally Suited To Building Sites And Where Metal Swarf Is Present On Floors. Normally Allows Walking On Hot Surfaces Up To 300ã‚â°c.sbp Classified.manufactured To En Iso 20345:2011.

Non-rotating Hole Cutter. Heat Treated For A Long Keen Cutting Life Providing Burr-free Accuracy Time After Time. A Small Pilot Hole Is Drilled Allowing A Connecting Bolt To Join The Punch On One Side And The Die On The Other Side Of The Material. Pressure Is Then Applied By Tightening The Bolt And Thus The Hole Is Literally Punched Out. Capacity: Mild Steel Up To 16swg (1.62mm), Stainless Steel Up To 16swg (1.62mm), Sheet Copper, Brass And Aluminum Up To 2.0mm. Plus Many Other Sheet Materials And Ductile Plastic.other Sizes Available On Request. Imperial 3/8" To 1 3/4". Metric 10mm To 80mm. Squares Punches Are Available In Sizes 19mm, 25.4mm. Rectangular Punches Can Also Be Supplied To Special Order.

York Sanding Belts To Suit A Wide Range Of Power Tools. Aluminium Oxide Designed For A Wide Range Of Materials Including Metal, Steel, Aluminium And Non-ferrous Metals.

2 Flute: Regular Series - Metricfor Optimum Performan Ce And Maximum Swarf Removal When Plunging, Slotting And Routing In Light Alloys, Brass, Aluminium, Non-ferrous And Other Soft Materials. Manufactured To Works Standards.metric Tolerancesdiameter: Over 1.00 ~ Up To 6.00. Tolerance: +0.000, -0.050.diameter: Over 6.00 ~ Up To 25.00. Tolerance: +0.000, -0.080.

Swivel Pads Are Fitted To Prevent Damage To Soft Matrials And Are Designed To Hold Irregular Or Tapered Work.ã¢â‚¬â¢ With Quick Release Lever. â€⢠Available In 4 Sizes.

Safe On All Hard Surfaces, Kills Germs And Freshens Leaving A Long Lasting Fresh Lime Fragrance.size: 5ltr.

To Securely Fix The Clamp Into Position The Base Can Be Welded To The Work Surface.

Pack Quantity 100for Fast, Repetitive Fixing With Minimal Use Of Screwdriver Required. Reinforced Screwhead Facilitates High Knock-in Loads With The Added Benefit Of Plug Neck Grip. Hammer-in Drive Screw For Fast Installation. Extended Expansion Zone Gives Extra Grip. Suitable For Use In Concrete, Stone, Brickwork And Blockwork.

Fashionable Head Protection Where There Is A Risk Of Minor Bumps Or Scrapes To The Head. (not To Be Used As An Industry Safety Helmet). Abs Shell Within A Cotton Baseball Cap. Fully Adjustable Velcro Strap, Air Vents, Internal Comfort Pad And A Moulded Peak. The Caps Are Machine Washable At 30ã‚â°c. Size Range Of 54 - 59cm. Conforms To En 812: 2012.

Metric Threadideal For Lifting At 90ã‚â°. Full Capacity Lifting In Any Direction.pivot Through 180ã‚â°.designed, Tested And Certified In Compliance With The Technical Directives. En1677.

Manufactured From Heavy Gauge Steel With Double Wall Construction Side Panels And Welded Joints For Added Rigidity. Coated In A Hard Wearing Epoxy Powder.

Set: Professional'classic' Pattern. For Professional Carpenters. Hammer-blow Resistant Handles. For Craftsmen And Joiners. Designed To Give A Life-time Of High Performance. Chrome Vanadium Alloy Blades, Hardened, Tempered, Ground And Polished. 'cab' (cellulose Acetate Butyrate Handles).

Cuts Wall Pipe (welded And Seamless) Up To 5mm Thick. The Grip Action Eliminates Hand Gripping Effort To Ensure Perfect Tracking.

Tip-p-iso: Precision Ground Iso Metric, Full Profile, Double-ended, External Threading Inserts With A Chipformer For Common Applications.grade: Ic908a Hard, Fine Grain Substrate With Excellent Chipping Resistance, Combined With A New Tialn Pvd Coating. Provides High Wear And Oxidation Resistance. Recommended For A Very Wide Range Of Materials Applications And Machining Conditiosn.iso Range - P/m/k: (p15-p30)(m20-m30)(k20-k40)iso Range - H/s/n: (h10-h20)(s10-s25)grade Or Coating Type: Pvdcoating Layers: Tialn

Cut Type: Center Cuttingfinish Types: Fire Coatedcarbide Grade: K/phelix Angle: 30 Degreematerial Type: Solid Carbidenumber Of Flutes: 2 Flutetolerance Class: H10overall Length: 75 Mmshank Diameter: 3 Mmthread Length: 20 Mm

Mm S-a (stepped Shanks) : Multi-master, Stepped Cylindrical Shanks For Solid Carbide Milling Heads. Available Are Steel, Solid Carbide And Tungsten Shank Materials. Tungsten Shanks Have Coolant Holes.

Manufactured To Maximise User Performance.manufactured From Copper To Enhance Heat Dissipation.manufactured To The Same Specifications As The Oem.maximum Wall Thickness Provides Logevity And Superior Performance.

Made From Zinc-plated Mild Steel. Supplied Complete With Pincers.165 Piece With Pincers, Size Range: 13t To 20t.

Extremely Fast Drying Anti-rust Paint. Exceptionally Long Life Can Be Applied Over Light Corrosion And Requires No Undercoat. Meets Performance Standards Astmb 117 Hot Salt Spray, Bs Au 148:pt 14 (1969) Natural Weathering, And Din En Iso 12944-1 Corrosion Protection Of Steel Structures. Ideal For Exterior Work. Cans Printed In English, French And German Suitable For Supply In The Eu.features:- Specially Formulated To Perform As An Undercoat And Topcoat Combined Into One Product.- High Performance Finish.- Two Actuators For Varied Spray Patterns And Application In Exterior Windy Conditions.- For Use On Bare, Welded Or Slightly Corroded Metal.

Waterproof Fabric. Jacket Features Adjustable Cuffs. Elasticated Hood. Industrial Zip With Studded Stormflap. 2 Front Pockets. Trousers Also Available.

Spindle/arbour Pads For Use With Hook-n-loop Backed Abrasive Discs.

Powerful Motor For Quick Work Progress And Ergonomic Shape For Maximum Control In Various Grip Positions. Durable, With A Long Life Time And High Work Efficiency. Benefits From Direct Cooling For High Overload Capability And An Anti-rotation Protective Guard That Is Quickly And Easily Adjustable. Disc Supplied Separately.

Fast Acting Caustic-based Solvent-free Cleaner And Degreaser. Effective For The Removal Of Animal, Vegetable And Mineral Soilings.size: 5ltr And 25ltr.

Fleece Bags Suitable For Kobe Wet & Dry Vacuum Cleaners3573bj-07 - 11l Capacity For Kwdvb30l3238bj-12 - 18l Capacity For Kwdv55l