Suitable For Top Entry 2 X M25 Or Bottom Entry 2 X M20. Will Accept Fl13 Flange At Top - Earth Hour Position : 6 - Bs En 60309ã¢â‚¬â�¹ - Blue

High Performance Drill For Volume Production. Emc Drills Are Designed For Use On Cnc Machines, Having Shank Diameters To Milling Cutter Standards For Use In Milling Chucks. Higher Cutting Speeds Can Be Employed And Long Tool Life Can Be Expected. Powder Metallurgy. High Cutting Speeds And Tool Life. Century Coating For Hard, Low Friction Surface And Excellent Heat Dispersal, Maintaining Cutter Edge For Longer. Milling Cutter Shank For Secure Chucking And Concentric Chucking For Precision Drilling. Additional Sizes Also Available.cutting Speeds & Feeds Recommendations:data In Table Is Based On Hole Depth At Three Times Diameter. Where Hole Depth Is Greater, Reduce Feed Figure By 2030%. Where Hole Depth Is Between Three To Five Times Diameter, Step Drilling Is Recommended (as Shown In Table Right). Emc Drills Are Self Centring Therefore A Centre Drill Is Not Recommended. Cutting Fluid Is Recommended For All Applications, For Optimum Cutting Fluid Should Be In Excess Of 8 Litres Per Minute.step Feed Intervalhole Depth\t3 X D\t4 X D\t5 X D\t6 X D\t8 X D\t10 X Dstep Depth\tno Step\t1 X D\t1 X D\t1 X D\t1 X D\t1 X D

Palm-coated Flat Dip Knit Wrist Glove. Seamless Nylon Interlock Liner For Ergonomic Fit And Dexterity. Suitable For Use In General Assembly And Engineering Applications. Added Surface To Provide Extra Grip During Application.cat Ii. Conforms To Bs En388 4.1.3.2

Scotchrap 50 And 51 Tapes Are Tough, Pvc Based Tapes With Special High Tack Adhesives Formulated To Resist Corrosion Of Metal Piping Systems Above And Below Ground, Fittings And Joints On All Millcoated Pipe And Electrical Conduit Systems. This 20 Mil Tape Can Be Applied Over A Wide Temperature Range And Is Resistant To Impact, Abrasions And Punctures.

For Use On Bare Steel And Galvanised Surfaces. Protects From Corrosion, Chemicals And Mechanical Wear.heat-resistant:rus7752117g - Up To 450 Ââ°c.rus7752120h - Up To 150 Ââ°c.please Note, Colours Are For Guidance Only.

Conform To: Asme B107.4. Made From Chrome Vanadium Steel With A Highly Polished Mirror Finish. Made To American Federal Standards, Giving Higher Torque Therefore Improved Performance. The Wrench Will Fit Over The Pipe To Give A Positive Location On The Nut. Can Be Used On Hydraulic Pipes, Brake Pipes Etc.contents5/16" X 3/8", 3/8" X 7/16", 1/2" X 9/16" And 5/8" X 11/16".

Heavy-duty - For More Industrial Applications.jaws Are Serrated In The Opposite Direction Toensure A Secure Grip. Cast Iron Frame, Drop Forged Handles And Jaws. All Moving Parts Are Heat Treated. Used Mainly In The Plumbing Industry For Gripping Pipes And Nuts. Conform With Bs 3594 : Part 1.

6 Piece Settin Coating Offers Increased Wear Resistance, Decreases Friction And Resists Corrosion To Maximise Tool Life. 90ã‚â° Cutting Angle. Supplied In A Robust Plastic Case. Manufactured To Din 335 Form C.sizes: 6.3, 8.3, 10.4, 12.4, 16.5 And 20.5mm.

Conical.all Sizes Are Nominal. Sizes Marked * Are 3mm Shank, All Others Are 6mm Shank.cut Numbers:cut 6 - Double Cutcrosscut And Double Cut To Improve Control And Chipbreaks. Manufactured From High Grade Tungsten Carbide For General-purpose Use.cut 9 - Chipbreakerchipbreaker Fast Stock Removal For Improved Control And Reduced Chips For Use On Hard Materials, I.e. Steel Alloy 50rc, 60rc, Carbon And Cast Iron.suitable For Deburring And Polishing Of Cast Iron, Cast Steel, Carbon Steel, Alloy Steel And Stainless Steel Etc. Up To Hrc65 Hardness.please Note:workpiece And Tools Should Always Be Steady And Well Supported.carbide Burrs Are Not Suitable For 'milling' Large Amounts Of Material, They Are For Light Stock Removal At High Rpm's 'low Feed - High Speed'.always Ensure That At Least 70% Of The Shank Length Is Clamped By The Collet Or Chuck Of The Tool Being Used.always Ensure That The Tool Is Rated To The Recommended Operating Speed Of The Burr.

For Towel Rollssingle Sheet Dispensing To Ensure Only The Towels Needed Are Used. Stub Roll Facility Ensures No Paper Is Wasted On The Roll. Dimensions: 33.7 X 37.2 X 203cm.

Wcgx Drill Fix Dft Insertsinsert Grade Gxinsert Geometry For Large Inserts.general Purpose Chipbreaker Geometry.

A Professional Gun For Delivering Polyurethane Foam. Made Entirely Of Metal, It Is Robust And Easy To Handle With Its Ergonomic Handgrip Made Of Anti-solvent Nylon. Body, Adaptor, Non-returnable Valve And Nozzle Are Teflon Coated To Prevent Foam From Sticking To The Gun And Facilitate Cleaning.exceptionally Hard Wearing Gun Parts

Steel Construction With Base Compartment For Larger Items And Removable Upper Tray For Smaller, Most Used Items.

Used To Put The Tension Into Chain Link Fencing To Prevent Sagging Between Posts. Galvanised Steel.

Tough Nylon Tipped Pen For General Office Use. Long Lasting Nylon Tip Does Not Smudge Or Fray. Ideal For Office, Home Or School. Available In Black, Blue, Red And Green. Pack Of 12.

Xtl Labelsfor Use With Xtl Series Industrial Label Printerspre-sizedideal For Flat Surface Labeling Like Barcodes, Faceplates, Shelves, Bins, Beams And More. Constructed Of A Glossy Polyester Material And Coated With Industrial-grade Adhesive, Pre-sized Labels Help Facilitate Batch Label Printing To Improve Productivity.safety Labelsã¢â‚¬â  Ul Recognized Component To Ul 969, Rohs Compliantd Ul Recognized Component To Ul 224, Meets Mil-std-202g, Mil-m-81531 And Sae-otl 23053/5 (class 1 + 3), Rohs Compliantimages Are For Illustration Purposes Only

6 Piece Setbi-metal Holesaw Kit With Teeth Made Of High Quality Hss-matrix Ii Steel. Added Spring And Depth Stopper Ensures Easy Plug Ejection. 10ã‚â° Tooth Geometry With 8% Cobalt Alloy Cutting Edge Guarantees Excellent Results In Steels, Cast Iron, Alloyed And Unalloyed Aluminium, Bronze, Copper And Brass. Set Contains: 20, 25, 32, 38, 51 And 64mm Holesaws, Power Change Adaptor And Pilot Drill All Contained In A Case.

Ata Bands Are Aluminium Oxide Or Ceramic Coated, Lap Jointed Abrasive Bands.ã¢â‚¬â¢ The Band Holders Consist Of Spindle Mounted, Positive Fit Expandable Drums. This Enables The Use Of Higher Grinding Forces &/or Slower Speeds Than Standard Drum Sanders.uses: Suitable For General Surface Finishing & Deburring Applications, Especially Where Access Is Limited.aluminium Oxideuses: Suitable For Use On A Wide Range Of Materials From Steels To Plastics. Particularly Effective On Non Ferrous Metals & Alloy Steels.grit Sizes : 36, 50, 80, 120, 150 (36 Grit Available For Ãëœ25 Bands And Above Only As Standard).

Bleached White 2-ply Cotton Dishcloths With Sewn Colour-coded Edges For The Elimination Of Cross-contaminatioon.supplied In Packs Of 10.size: 300 X 360mm.colours: Blue, Green, Red And Yellow.

Gojo Spa Bath Body & Hair Shampoo Is A Luxurious, Enriched Formula For Hands, Hair And Body. Ideal For Use In Health Clubs And Fitness Centres. Pleasant Herbal Fragrance.

Featuresã¢â‚¬â¢ Delivers Up To 2.5x More Run Time, Up To 20% More Power And Up To 2x More Battery Life Compared With Other Lithium-ion Technologies And / Or With Previous Milwaukee Battery Technology. (results Depend On Tool And Application).ã¢â‚¬â¢ Redlithium-ion Protection With Milwaukee Redlink Digitaloverload Protection To Prevent Users From Damaging Their Cordless Power Tool Investment In Abusive Situations.ã¢â‚¬â¢ Individual Cell Monitoring Ensures Optimal Charge And Discharge For Maximum Life.ã¢â‚¬â¢ Durable Metal Frame Battery Construction With Shock Responsiveseparators Preventing Pack Failure From Excessive Vibrations Or Drops.ã¢â‚¬â¢ Water Protection Rroutes Water Away From The Electronics & Out Of The Battery Pack.ã¢â‚¬â¢ Can Be Used In Extreme Temperatures Down To -20 Ââ°c Withoutcompromising On Runtime And Battery Life.ã¢â‚¬â¢ On-board Battery Fuel Gauge Helps The User To Maximize His Battery Runtime Efficiency.

Gojo Lemon Pumice Hand Cleaner Cream Formula With Fresh Lemon Fragrance And Pumice Scrubbers. Use With Or Without Water. For Removing Grease, Tar And Oil.plastic Cartridge: 2.25kg.

Key Features:the Electrosoft Composite Line Features Insulating Latex And Polychloroprene Gloves For Linemen.the Ergonomic Shape And Interlock Cotton / Chlorinated / Cotton Flocked Interior Make The Glove Very Comfortable To Wear. The Use Of Polychloroprene To Add Mechanical Resistance Avoid The Wear Of Overglove For A Better Comfort Of Use.resistance Features:the Natural Latex Base Offer High Dielectric Characteristics. The Thickness (from 1,7 To 2.7 Mm) Ensures Good Protection From 500 To 17000 Volts. The Outer Layer In Orange Elastomer Gives The Glove Outstanding Mechanical Resistance. There Is Thus No Need To Wear Leather Overgloves. The Gloves Also Have An Arc Flash Rating To 60.3 Cal/cm2safety Efatures:the Ergonomic Shape Improves The Flexing Movement Of The Hand While Ensuring A High Level Of Protection.recommended Industries/use:transportationutilitieshazards:electrical & Arcregulations:category 3: Irreversible Risks. Standards En 60 903-2003, Cei 903-2002

Srcã¢â‚¬â¢ Metal Free â€⢠Polyurethane Sole With Black Suede Leather Upperã¢â‚¬â¢ 200j Composite Toecapã¢â‚¬â¢ Kevlar Midsoleã¢â‚¬â¢ Full Length Footbedã¢â‚¬â¢ S1p En Iso 20345

Auxiliary Contact Block - 1 No + 1 Nc - Screw-clamps Terminals