240v 5 Meter Mini Cassette Cable Reel. With Thermal Overload Protection And Reset Button.

6mm Shank.shaft Mounted Flap Wheels Can Be Used In Portable Air Or Electric Power Tools, Including Tyre Buffers, Flexible Shafts And Hand Drills. Manufactured From Highest Quality Industrial Cloth. Used For A Wide Range Of Applications Such As Removal Of Rust, Cleaning Up Welds And Sanding Wood Prior To Painting. Boxed In 10s Except For 60 X 50 And 80 X 50 Which Are Packed In 6's. Recessed Hub Design For Maximum Access In Tight Corners.applicationsfinal Finishing Of Metal Surfaces. Mis-match Removal And Deburring On Machined Components. Blending And Finishing Tool, Tubes, Dies, Moulds, Channels. Edge Blending And Cleaning. Surface Preparation Prior To Painting And Plating. Can Be Used On Wood, Plastic And Fibreglass.

Inch.high Speed Steel Slitting Saws Are Hollow Ground To Give The Clearance Necessary For Deep Cutting. Available In Coarse And Fine Teeth, Number Of Teeth Specified Below. Supplied With Keyways As Standard. Manufactured To Bs122.

At132a Gloss Water Resistant Finish, Very High Tack For Instant Grab, A Consistant Unwind And Easy To Tear.better Performance:the Tape Has A Thicker Sheeting Which Increases Its Abrasion Resistance And Strength. It Also Offers An Improved High Tack Performance Which Delivers An Excellent Initial Grab.easier To Usethe Tight Unwind Is For Controlled Handling Which Is Important When Working At Heights, But Is Still Easy To Tear And Will Conform To Awkward Surfaces.for A Better Performance Inside Or Outside.the Development Of At132 Hasonly Been Possible Because Of New State Of The Art, Adhesive Mixing And Cloth Coating.this Advanced Technology Has Enabled The Development Of At132 Which Displays Superior Performance Characteristics To That Of At169. Therefore At132 Will Replace At169.

Waterproof Fabric With Taped Seams. Quilt Lining. Concealed Hood. Two Outer Lower Pockets. One Inner Pocket.colours Are For Guidance Only

Green Silicon Carbide: For Use On Non-ferrous Metals And Alloys

'volt-tested' To Ensure Safety On Or Near Electrical Equipment Up To 1000v Ac Or 1500v Dc. The Blades Are All 'sheathed' Prior To The Handle Being Fitted. This Is Then Moulded Over The Sheath To Guarantee A Permanent Joint. There Is A 15mm Maximum Length Of Uninsulated Blade At The Tip Of Each Screwdriver. Conform With Din 7437/38 And Bs 2559: Part 3.

Manufactured From Ceramic Ferrite Material Set In A Mild Steel Shell. Suitable For Holding Machine Tool Accessories With M6 Threads Or Building Into Jigs. Supplied With J Bolt For Easy Release.

A18 Precision Layer Wound Mig/mag Welding Wire, Ideal For Welding Mild And Medium Tensile Steels Requiring Impact Toughness Properties Down To -20ã‚â°c. A Copper Coated Finish Provides Positive Feeding And Is Double Oxidised With Manganese And Silicon To Provide Quality Welds With Good Mechanical Properties. Used In General Welding Applications And Fabrication Work.

Xn-100 Light-dutyfor Paper, Light Materials And Soft Wood. Overall Length: 148mm.xn-200 Medium-dutyfor Heavy Paper And Medium Density Materials. Overall Length: 146mm.

A Range Of Economically Priced Rugged Workwear Manufactured From High Quality Selected Chrome Leather. Spatter-resistant And Tear-resistant. The Full Range Offers Head-to-toe Protection Against Weld Spatter And Grinding Sparks. Suitable For Use In Workshops, Foundries And On-site.sleevescan Be Used Independently Or In Conjunction With An Apron Or Other Garment To Offer Optimum Protection Of The Lower Arm And Elbow. With Elasticated Openings. All Seams Have Heavy Duty Stitching For Durability And Extended Wear. One Size. Ce Approved To En470-1 Cat Ii.

Gy Series Right Hand Modular Holder & Blade For 3.00mm Grooving Width

13 Gauge Nylon Knitted Glove With Nitrile Coating To Palm And Fingers. Ideal For General Handling In Construction And Industry.added Surface To Provide Extra Grip During Application.cat Ii. Conforms To Bs En388 4.1.2.1

Cp918csilicon Carbide, Resin Bonded, C-weight Backing Waterproof Paper. Suitable For Paints, Lacquers, Fillers, Rubber, Synthetic And Mineral Materials. Highest Surface Finishing On All Kinds Of Materials.size: 230 X 280mm.

R28, R36superior Cable Staple Guns, Specially Designed For Low Voltage Cables Up To 4.5mm (r28) And 6mm (r36) In Diameter. 40% Easier To Operate Thanks To A Patented Easy To Squeeze Trigger With 3-step Force Adjuster. All-steel Casing And Wear Parts Inside.compatible Staples:r28: 9 - 11mmr36: 10 - 14mm

High Quality A4 Executive Pads. Stitched And Bound At Head With Micro-perforations For Easy Sheet Removal. Each Pad Contains 50 Sheets.

General-purpose Drill For Steels, Cast Steel, Grey Cast Iron, Malleable Cast Iron, Nickel Brass, Aluminium, Alloy And Graphite. Straight Shank.

Offering Power, Precision And Versatility, The Pbs151 Is A Professional Level Dual Narrow Crown Pneumatic Stapler And Nailer Ideal For High Tempo Furniture, Panelling, Cabinet Making, Finishing And Trim Work. It Has A 360ã‚â° Adjustable Air Exhaust That Keeps Dust Away From Working Surfaces And Adjustable, Depth-of-drive Function. Other Features Include A Quick Reloading System And Comfort Grip For Less User Strain. Designed For Use With Narrow Crown Staples Up To 40mm And Brads Up To 50mm. Technical Detailsshoot Staples 20-40mm And Brads 15-50mmcontact Actuation Triggerair Inlet: Â⼠"nptfastener Capacity: 110 Staples/110 Bradsbox Contains:1 X Rapid Pneumatic Combi Tacker/nailer1 X Oil Pot1 X Hex Wrenches1 X Safety Glasses1 X Box Of 200 30mm Staples1 X Box Of 200 50mm Brads

High Strength Self Mating Fastening System. 300 Square Pieces Backed With A Pressure Sensitive Adhesive.self Mating Black Fastening Squares With Mushroom Shaped Stems That Are Backed With A Rubber Based Pressure Sensitive Adhesive.designed To Bond To Many Plastics, Powder Coated Paints And Other Low Surface Energy Materials.mushroom Heads Lock Together Replacing Standard Hook And Loop Systemuses Comprise Attaching Doors, Access Panels, Signage, Furniture And Many More.colour: Black.thickness (mm) 5.8.width: 25 Mm.length (m): 25.adhesive: Rubber.

36alloy Steel With Rubber Handle To Absorb The Striking Vibrations. Jaws Are Sharp Polished To Ease The Nail Pulling Operation.

Body Made From Solid Brass.shackle Made From Hardened Steel With Nano Protect Coating.shackles Available In Different Lengths (hb).inner Componejts Made From Non-corrosive Materials.precision Pin Tumbler Cylinder.cs: Shackle Guard Protects Shackle From Attack.

Self Colour. High Grade Alloy Steel To Bs En Iso 898/1 Grade 12.9. Suitable For All High Tensile Applications. Maximum Operating Temperature (unplated): 300ã‚â°c. Dimensions To Bs 2470 - 1936 Series.

Fm25wireless Technology Allows You To View Inside Temperatures Without Opening The Refrigerator Door. Temperatures From The Remote Rf Sensors Inside Are Transmitted Wirelessly And Displayed On The Base Station Which Can Be Mounted Magnetically To The Cabinet Or Free Standing Using The Fold Away Bracket. The Display Is Updated Every Eight Minutes. Audible And Visual Alarms Are Triggered When Temperature Exceeds Pre-set Maximum And Minimum Temperatures After 15mins (prevents False Alarms When Door Opened) - Alerting You To High Or Low Temperatures That Could Affect The Product Quality. Ââ°c Or Ââ°f Display Remote. Licence-free Frequency. Low Battery Indicator. Applications Include Fridges, Freezers, Vaccine Storage, Incubators, Transportation, Greenhouses And Many More.

For Specialist Applications Such As Breathing Air, Non-spark, Damp Or Higb Condensation Environments. Brass Body & Valves.nominal Bore: 4.8mm Flow Rate @ 6 Bar - 43 Cfm @ 100 Psi Maximum Working Pressure: 14 Bar / 200 Psi Adaptor Series: Standard Interchangable: Cejn 295, Rectus 19

â€⢠Shank Diameter: 3,2 Mmã¢â‚¬â¢ Working Diameter: 38,0 Mmã¢â‚¬â¢ Max Working Depth: 14,0 Mmã¢â‚¬â¢ Maximum Rpm: 35.000 1/min