Flame Retardant Balaclava With Elastane For Stretch And Comfort. Open Face. Single Layer. Colour: Navy.

Taper Bushes Are The Most Convenient And Cost Effective Method Of Fixing Components To A Mating Shaft Without Using Any Special Tools. Taper Bushes Are Pre-machined With The Required Bore & Keyway Size And Are Supplied Complete With Locking Set Screws, Thus Making Savings In Time And Cost On Any Machining Process. They Are Available With Either Metric Or Imperial Bore And Keyway Size Options. Taper Bushes Are Designed For Use With V-pulleys, Chain Sprockets, Micro V-pulleys, Timing Belt Pulleys, Couplings, And Weld-on & Bolt-on Hubs. Part Numbers Are Identified By A 4 Digit Number (e.g. 1610) Which Represents The Taper Bush Series Followed By The Bore Size (e.g. 28mm) For Example 1610x28mm.

Sc2-500c Electrical Contact Cleaner Spray - Trike-freean Effective Solvent Based Cleaner. The Product Is Formulated To Remove Oil, Grease And Carbon Dust From Electrical Switch Gear And Electronic Components. It Is Safe On Most Common Plastic Parts, But Will Attack Lacquer Finishes And Coatings. If In Doubt About Suitability, Trial The Product On A Scrap Sample First Before General Application. The Product Is Propelled From The Aerosol By Co2 Carbon Dioxide Gas (non-flammable). Electrical Switch Cleaner Fluid Is Flammable. Always Ensure Power Is Switched Off Before Applying This Product To Electrical Equipment.size: 500ml.

Chrome Vanadium Steel With A Highly Polished Mirror Finish Preventing Oil And Dirt From Adhering To The Spanner. Made To American Federal Standards, Extra Thick Heads Offer Higher Torque Forces To Be Applied Therefore Improved Performance. Conform To Asme B107.39chrome Plated Finish To Pevent From Corosion.15ã‚â° Head Angle

To Suit Pratt Burnard Chucksfor Standard, Super Precision, Griptru, All Steel (type 78), Pratt Burnard Old Type (inch) And Hardinge Chucks.

Ergonomic Insulated Full Size Handle, Swivel Cap And Eight Interchangeable Drivers Supplied In A Compact Protective Pouch With Belt Loop. 2-in-1 Design, Use The Detachable Swivel Cap For Fast (low Torque) Driving, Or Use The Full Size Detachable Ergonomic Handle For Higher Torque Fastening. Safe Up To 1000v Ac/1500v Dc. 10 Piece Set Contents (mm):parallel: 0.4 X 2.5 X 100mm, 0.5 X 3.0 X 100mm, 0.8 X 4.0 X 100mm, 1.0 X 5.5 X 100mm And 1.2 X 6.5 X 100mm. Cross Point: No.0 X 100mm, No.1 X 100mm And No.2 X 100mm.

Tm Series Easy To Load And Firmly Holds Tubing In Place. Suitable For Use With Nylon, Soft Nylon And Polyurethane Tubing. The Holders Can Be Mounted In Place With Screws. Manufactured From Flame Resistant Resin. Temp. Range: -20ã‚â°c To +60ã‚â°c. Colour: Black.images Are For Illustration Purposes Only.

For Removing Excess Stone And Facing, Bevelled On One Side. Manufactured From High Quality Octagonal Chrome Vanadium Steel With A Ground Cutting Edge, In Accordance With Bs 3066. For Use On Brickwork, Masonry And Cold Metals.

Excellent For Removing Unpleasant Odours When Using The Particle Filter Configuration. Snap-fastens Between The Blower Unit And The Particle Filter. Odour Filter Is Not Required If Gas Filter Is Used.

This Multi-purpose Tote Tray Organiser Is An Ideal Way To Store And Transport Tools. The Tote Provides Two Deep Trays For Storage, Built In Tool Holders And A Ribbed Handle For Extra Grip.small: 392 X 281 X 110mm.large: 520 X 340 X 200mm.

Suitable For Precise Flush Cutting. Sprung Alloy Steel Blade With Rigid Steel Back, Polished Wooden Handle And Brass Ferrule.

3mm Shank. Overall Length 45mm. Ball Nosed.diamond Grip Mesh Is 120/140. Recommended Operating Speeds 15,000 30,000 Rpm. Suitable For Precision Grinding Of Carbide, Gems, Ceramics, Tough Alloys, Cermets, Tool Steels Etc.

Sp4used For Smoothing And Final Finishing. Featuring A Robust Level Cap Designed To Lock Down On Three Points For Secure Location Of The Cutting Iron. Razor Sharp Tungsten Vanadium Steel Cutting Iron To Cut Even The Hardest Of Woods. Impact Resistant Abs Resin Handle And Knob For Comfort And Control. Traditional Adjusting Nut For Fine Seating. Length: 245mm. Blade Width: 50mm.

Sp1-500b - Greensolent Green Moisture Guard Is A Soft Thin Film Moisture/ Corrosion Protective Coating. Packed In A Larg E500ml Aerosol. The Coating Has A Slight Green Colouring Which Clearly Indicates Treated Areas. Ideal For Longer Terms Moisture/corrosion Protection Of Machined Components/moulding Dies And Tools. Removed Easily With Solent Industrial Cleaner, Part Number Sc1-500b.size: 500ml.

Phosphate Hardened And Black Oxide Anti-corrosion Treated. Comfortable Handle. Graduated Jaw. As Per Din 3117, Bs 6333, Iso 6787, Ggg-w6316 Type 1, Class 2 And Asme B107, 8m-1991.'ergo' Typemanufactured From Drop Forged Chrome Vanadium Steel. Ground And Polished Parallel Gripping Jaws With Etched Measurement Scale. The Adjustable Jaw Does Not Fall Out At The Maximum Opening Capacity.set Consists Of 3 Adjustable Wrenches 8070, 8071 And 8072.

200 Joules Steel Toe Cap Impact Protection. Guards Against Falling Objects And Collisions. Steel Midsole To Prevent Sharp Object Penetration. Ideally Suited To Building Sites And Where Metal Swarf Is Present On Floors. Oil, Petrol, Water, Acid And Alkali Resistant. Resists The Build-up And Conductance Of Static Electricity. Of Most Benefit When Walking On Synthetic Carpets Or Near Electrical Machinery. Dual Density Polyurethane/rubber Soles For Extra Comfort. The Sole Features A Nitrile Rubber Outsole, Resistant To Heat To 300ã‚â° And A Low Density Polyurethane Interlayer, For Increased Comfort And Shock Absorption. Water Penetration And Absorption Resistant. Helps Keep Feet Dry In Wet Conditions.ã¢â‚¬â¢ Self Cleaning Soleã¢â‚¬â¢ Textile Midsoleã¢â‚¬â¢ Anti-staticmanufactured To En Iso 20345:2010.classification: S3 Hi Ci Hro Src.full Grain Barton Print Buffalo Leather With Higher Chrome Content Upper. Moisture Wicking Textile Inner Lining To Vamp Only. Moisture Wicking, Washable Footbed.

A Practical Solution Ideal For Dry Or Slightly Oily Applications. The Liners Have An Innovative Yarn Structure That Contains An Optimal Level Of Dyneema. It Provides Cut Resistance For Safe Use Incontrolling, Handling And Assembly Applications Involving Contact With Small To Medium Edged Pieces. To En 388 Cat Ii. Antistatic To En1149.

Casual And Smart With A Button Down Collar With Short Sleeves And A Tailored Fit. 15% Polyester. 85% Combed Cotton.

An Innovative Yarn Structure That Contains An Optimal Rate Of Dyneema Offers High Levels Of Cut Resistance, For A Safe Use In Controlling, Handling And Assembly Applications Involving Contacts With Sharp Pieces. The Lycra In The Liners Of Both Gloves, As Well As The Polyurethane Coating, Provides Excellent Flexibility And Fit, And Makes The Gloves Easy To Wear For Entire Eight-hour Shifts.conforms To En388 4443.

3/8" Diameter Hss Single Flute For Fast Free Cutting. Suitable For Applications Where Cutting Speed Takes Preference Over Finish. Often Used By Signwriters For Cutting Plastics And Soft Aluminium.

Self-adhesive Treads That Provide An Anti-slip Finish To Improve Safety On Concrete, Metal Or Wood Surfaces. Colour: Black. Pack Size: 10. Tread Size: 610 X 150mm.

Junior Digging Fork - 5788perfectly Suited To The Smaller Enthusiast. The Materials Used In The Manufacture Of Bulldog's Standard Tools Are The Same As Those Used To Produce These Children's Tools. This Junior Version Of A Traditional Style Fork Is Solid Forged From One Piece To Give Strength And Durability In The Garden.pd Handle. Blade Width: 150mm.blade Height: 230mm. Overall Length: 815mm.

Concentrated, Solid Gel Air Freshener With A Fresh Floral Fragrance, Or The Air Of A Sea Breeze.pack Size: 190g.

Cp7830hq - 1/2" Quiet Speed Ratchet Wrenchadjustable Exhaust, Sound Level As Low As 79dba. Rubber Handle Grip, Lightweight And Well Balanced Tool. Working Torque Range: 13 - 122 Nmmax Torque: 122 Nm Free Speed: 190 Rpm. Air Inlet Thread Size: 1/4 Nptf. Min. Hose Size: M10overall Length: 305 Mm.

G2r-*-s (s) General Purpose 1-pole 10a Plug-in Relay With Led Indicator And Diode (nd), Mechanical Operation Indicator And Nameplate (s). Reduces Wiring Work By 60% When Combined With The P2rf-@-pu Push-in Plus Socket (according To Actual Omron Measurements).