Tuffsafe Over Spectacle W/t Adjustable Frame
    Tuffsafe Over Spectacle W/t Adjustable Frame.

    One Piece Clear Polycarbonate Lens With Built In Side Protection For Added Safety. Anti-mist Treatment On Both Sides Of The Lens. Integral Nose Bridge For User Comfort. Lightweight For Comfort.



    Manufacturer: Tuffsafe
    ID: 3904
    Category: Personal Protection , amp, Clothing , gt, Eye Protection , gt, Spectacles , amp, Glasses
    SKU: Tff9601200k




Irwin T591057 Glm Hand Pipe Bender 15mm 22mm
    Irwin T591057 Glm Hand Pipe Bender 15mm 22mm.

    Glmfor Use When Free Hand Bending, Floor Support Bending Or Vice Held Bending. Fitted With Aluminium Formers, Rollers, Tube Locator And Tubular Steel Handles To Make Smooth Perfect Bends.



    Manufacturer: Irwin
    ID: T591057
    Category: Hand Tools , gt, Plumbing , amp, Pipe Tools , gt, Pipe Benders
    SKU: Hil5883100a




Qconnect Q Connect A1 Cutting Mat
    Qconnect Q Connect A1 Cutting Mat.

    Kf01138high Quality Cutting Mat With A Non-slip Surface Which Closes Behind The Blade. Leaves A Constant Smooth Surface For Cutting Time And Time Again. Double-sided With Grid On One Side. Colour: Green.



    Manufacturer: Qconnect
    ID: Kf01138
    Category: Office Supplies , amp, Stationery , gt, Desktop , amp, Personal Accessories , gt, Desk Mats
    SKU: Que8150010k




Guhring 3308 12.00mm 2fl Carbideb/n End Mill
    Guhring 3308 12.00mm 2fl Carbideb/n End Mill.

    3559type: N.din: 6527 A/b.shank: Ha.length: Long.helix Angle: 30.tolerence: H10.



    Manufacturer: Guhring
    ID: 03308 012.000
    Category: Cutting Tools , gt, Milling , gt, End Mills , gt, Ca Rbide End Mills - Regular Series
    SKU: Guh1614712f




Kennedy 12.0 X 600mm Sds-plus Hammer Drill Bit
    Kennedy 12.0 X 600mm Sds-plus Hammer Drill Bit.

    Tungsten Carbide Tipped Sds Masonry Drills Are Suitable For All Sds Direct Fitting Hammer Drills. High Performance Drill Bits That Withstand Extreme Heat Generation Ensuring Maximum Performance Coupled With Wear Resistance. Manufactured To Din 8035.



    Manufacturer: Kennedy
    ID: Crken0572980k
    Category: Cutting Tools , gt, Hole Making , gt, Masonry Drill Bits , gt, Sds Shank Drill Bits
    SKU: Ken0572980k




Kennedy 1/16" Hss-cobalt L/s Kc3 Throwaway Cutter
    Kennedy 1/16" Hss-cobalt L/s Kc3 Throwaway Cutter.

    Long Series - Inch.kennedy Kc3 Throwaway 3* Flute Endmills Are Manufactured Hss-co 5% Making Them Much Tougher Than Hss. This Means That Kennedy Endmills Can Be Used At Higher Speeds And Feeds Which In Turn Gives Greater Productivity. Suitable For Slot Drilling And End Milling. Cutters Are Held In Adaptors/chucks By The Action Of A Set Screw Which Locates On The Shank Flat Giving Quick And Easy Cutter Change. *except: 1mm Cutters, 2mm And 1/16" Ball Nose Cutters, All Of Which Have Two Flutes.inch Tolerances: Diameter: Over 1/16" ~ Up To 1/4". Tolerance: +0.0005, -0.0013.kennedy Kc3 Endmills Are Available Uncoated, Tin Coated And Ticn Coated.tin (titanium Nitride) Provides A Surface Hardness In The Region Of 2300hv Which Offers Improved Wear Resistance, Tool Life And Productivity.ticn (titanium Carbonitride) Gives A Surface Hardness In The Region Of 3000-3500 Hv, Excellent Wear Resistance And Good Heat Resistance. This Coating Is Used For The Same Things As Tin But Also For Hard Steels, Stainless, Cast Iron, Brass & Bronze.



    Manufacturer: Kennedy
    ID: Crken0621540k
    Category: Cutting Tools , gt, Milling , gt, Throwaway Cutters , gt, Kc3 Milling Cutters
    SKU: Ken0621540k




Indexa E2-1 50x16 Boring Bar Sleeve
    Indexa E2-1 50x16 Boring Bar Sleeve.

    Boring Bar Sleeves - E2-1manufactured To Din 69880. Suitable For Use In Nc Lathes With Vdi Fixing Disc. Features: All Tools Are Fully Carburised And Hardened. Surface Hardness Of 58 - 60hrc. Tensile Strength Above 1000n/mm2. Surfaces Blued; Seat, Parallel Shank And Shoulder Ground. Tools Can Be Adjusted In-situ On Radial And Axial Toolholders. Seat Shim Allows Two Tool Sizes To Be Used With One Toolholder. Ball Regulator (bullseye) Provides Easy Coolant Control.



    Manufacturer: Indexa
    ID: E2-1 50x16
    Category: Spindle Nose , amp, Workholding , gt, Specialist Toolholders , gt, Vdi Tooling , gt, Vdi Sleeves, Blanks , amp, Chucks
    SKU: Ind1483130k




Kennedy 250mm Flexible Extension For Blow Gun
    Kennedy 250mm Flexible Extension For Blow Gun.

    Flexible Etxension - 250mmthe Extended Flexible Nozzle Can Be Bent Into Any Position To Allow You To Direct The Air Flow To Exactly The Area You Require It In. Suitable For Use With Standard And Plastic Blow Guns.



    Manufacturer: Kennedy
    ID: Fe10
    Category: Power Tools , gt, Air Tool Accessories , gt, Blow Gun Acceessories
    SKU: Ken2595100k




Ingersoll-rand 1099xpa High Performance Ratchet Wrench
    Ingersoll-rand 1099xpa High Performance Ratchet Wrench.

    1099xpa - 1/2" Heavy-duty Speed Ratchetbeefy Head Design, Outlasts Competitive Wrenches 2:1. Variable Power Using Button Throttle 103 Nm Max. 220 Rpm, Twice The Speed Of Some Others. Button Throttle, Easy Control In Tight Places, Adjustable Exhaust, Avoids Blow-back To Face.overall Length: 305mm.



    Manufacturer: Ingersoll-rand
    ID: 1099xpa
    Category: Power Tools , gt, Air Tools , gt, Air Ratchet Wrenches
    SKU: Ing2691099x




Kennedy M8x1.25mm 45 Deg Angle Hydraulic Nipples
    Kennedy M8x1.25mm 45 Deg Angle Hydraulic Nipples.

    For Use With Kennedy Grease Guns And All Other Hydraulic Grease Equipment.



    Manufacturer: Kennedy
    ID: Ken-541-0930k
    Category: Hand Tools , gt, Engineers Tools , gt, Lubrication , gt, Grease Connectors, Nipples , amp, Hoses
    SKU: Ken5410930k




Kennedy-pro 8-19mm Double Ended Swivel Socket Set 6pc
    Kennedy-pro 8-19mm Double Ended Swivel Socket Set 6pc.

    Designed To Give Greater Flexibility And Improved Access When Working In Difficult Conditions. Bi-hexagon (12 Point). Manufactured From Fully Polished Chrome Vanadium Steel. Conform With Ansi B107.5m.contents6 Piece Bi-hexagon: 8 X 9, 10 X 11, 12 X 13, 14 X 15, 16 X 17 And 18 X 19mm.



    Manufacturer: Kennedy-pro
    ID: 030150pu02
    Category: Hand Tools , gt, Spanners , amp, Wrenches , gt, Spanner Sets
    SKU: Ken5823725k




Kennedy Infrared Heater 240v/twin1400w
    Kennedy Infrared Heater 240v/twin1400w.

    Highly Efficient Twin 1400w Infrared Elements Using High Frequency Heat Waves That Penetrate The Air Without Heating It. The Heater Warms Objects And People Rather Than The Atmosphere. This Results In Lower Running Costs Because Heat Is Not Lost Through Draughts Or Pre-heating. Withstands The Rigours Of Site Use With Ease. Rubber, Non-marking Wheels Make It Totally Portable. Integrated Lifting Handle, Cable Tidy And Anti-tilt Safety Cut-off Switch.



    Manufacturer: Kennedy
    ID: H029400
    Category: Powe R Tools , gt, Heating And Ventilation , gt, Heaters Infra-red, halogen
    SKU: Ken2825560k




Guhring 5621 10.20mm Carbide Sl Ratio Drill
    Guhring 5621 10.20mm Carbide Sl Ratio Drill.

    Design: Ultra-finest Grain-solid Carbide, According To Factory Standard, Type Rt 100 U.fire Coated Surface, Right Cutting With Special Point Geometry And Ratio Point Thinning. Normal Angle Of Rake, Core Thicker Than Normal And Without Core Gradient, With Internal Cooling. The Drill Has A Very Good Self-centring Behaviour And Produces Short Chips, Even From Long-chipping Materials.application: For Accurate Alignment Drilling With Narrow à Tolerances And Good Surfaces. Suitable For Drilling Deep Holes Up To 7 X D With High Cutting Values. Particularly Suitable For Long And Short-chipping Materials Such As Construction And Case-hardening Steels, Steel Castings, Tempered Steels, Carbon Steels, Bronzes, Castings, High Alloy Alsi Alloys And Alloy Steels Up To 1200 N/mm In Strength.note: The Drills Can Be Sharpened And Recoated Several Times.with Twisted Internal Cooling Through The Bar. The Coolant Directly Accesses The Blades And Flushes The Chips Out Of The Hole.



    Manufacturer: Guhring
    ID: 05612 010.200
    Category: Cutting Tools , gt, Hole Making , gt, Carbide Drills , gt, Carbide High Performance Production Drills
    SKU: Gur1583719q




Honeywell Duramaxx Clear Lens Goggle, Fabric Headband
    Honeywell Duramaxx Clear Lens Goggle, Fabric Headband.

    Innovative Otg Goggle With High Comfort, Large Panoramic Field Of Vision And Protection In A Sleek, Stylish Design. Combines Modern Design With Superior Lens Coating (new Dura-streme Coating). Clear Lens.en166 (1bt) 34kn



    Manufacturer: Honeywell
    ID: 1017750
    Category: Personal Protection , amp, Clothing , gt, Eye Protection , gt, Goggles
    SKU: Hnw9603330c




Gpc Industries Ltd Platform Truck C/w Mesh Sides 400kg
    Gpc Industries Ltd Platform Truck C/w Mesh Sides 400kg.

    Heavy Gauge Steel Mesh Bed And Sides. Sides Can Be Folded Down, Removed Or Locked In An Upright Position. Heavy Duty, Powder-coated Paint. Mobile On 340mm Pneumatic Tyres. Supplied Flat Packed For Self-assembly.cart Dimensions L X W: 1200 X 600mmplatform Height: 360mmcapacity: 400kg.contents Not Included.



    Manufacturer: Gpc Industries Ltd
    ID: Ti201b
    Category: Storage , amp, Handling , gt, Handling , gt, Barrows, Trucks , amp, Lift Tables
    SKU: Ctl9850835k




Psf Executive Psf Black Brogue Leather Shoe Size 6-s75
    Psf Executive Psf Black Brogue Leather Shoe Size 6-s75.

    Dual Density Polyurethane/rubber Compound Sole, Antistatic, Tested To The Highest Level Of Slip Resistance.



    Manufacturer: Psf Executive
    ID: S75
    Category: Personal Protection , amp, Clothing , gt, Footwear , gt, Safety Shoes
    SKU: Psf9630084a




Rocol Foodlube High Temp Grease 2 380gm
    Rocol Foodlube High Temp Grease 2 380gm.

    White Semi Translucent Grease Suitable For Lubrication Of Sliding Surfaces And All Types Of Plain And Anti Friction Bearings Operating At High Temperatures. Temperature Range -20c To 200c. Nsf H1 Registered.



    Manufacturer: Rocol
    ID: 15251
    Category: Lubricants , amp, Chemicals , gt, Food Industry Lubricants , amp, Greases , gt, Food Industry Greases
    SKU: Roc7706282q




Ever Build Forever White Silicone 3c Cartridge
    Ever Build Forever White Silicone 3c Cartridge.

    Forever Is A Superior Silicone Sealant That Is Permanently Waterproof And Flexible And Is Ideal For Sealing Shower Bases And Cubicles, Around Baths, Sinks And Basins And Sanitary Ware. For Use In Kitchens, Utility Rooms And In All Areas Of High Humidity. Also Ideal For Sealing Around Window And Door Frames Internally In Areas Subject To High Condensationpack Size: C3 (310ml).



    Manufacturer: Ever Build
    ID: Foreverwe
    Category: Adhesives , amp, Sealants , gt, Gaskets , amp, Sealants , gt, Silicone , amp, Caulk Sealants
    SKU: Evb7168650k




Ejendals 3460a Jalas Black Safety Trainers - Size 9
    Ejendals 3460a Jalas Black Safety Trainers - Size 9.

    Light And Airy Safety Shoe With Aluminum Toe-cap. Breathable Lining. Detachable Full-length Shock-absorbing Insole. Good Grip. Esd Approval.s2, Aluminium Toecap.



    Manufacturer: Ejendals
    ID: 3460a
    Category: Personal Protection , amp, Clothing , gt, Footwear , gt, Safety Trainers
    SKU: Eje9633460q




Eclipse Blue 160mm Combination Pliers
    Eclipse Blue 160mm Combination Pliers.

    Pw2169maxigrip Combination Pliers. Polished Head With Ergonomic Moulded Dual Material Handle, Incorporating Anti-slip Guards And Palm Grips For Improved Comfort And Control.



    Manufacturer: Eclipse Blue
    ID: Pw21696/11
    Category: Hand Tools , gt, Pliers , amp, Grips , gt, Combination , amp, Linemans
    SKU: Ell5582350g




Lexmark Black Ink Cartridge 10n0016
    Lexmark Black Ink Cartridge 10n0016.

    The Lexmark 16-standard Yield Black Print Cartridge Produces High Resolution Images And Crisp Text. Its Pigment-based Ink Offers Laser Quality Text Which Is Both Water And Fade Resistant. Compatible With Lexmark Z13, Z23 And Z33.



    Manufacturer: Lexmark
    ID: 10n0016
    Category: Computers, Televisions , amp, Accessories , gt, Printer Cartridges
    SKU: Lex8010400k




Cotswold Kms450 450g Cotton Kentucky Mop Head Green
    Cotswold Kms450 450g Cotton Kentucky Mop Head Green.

    Stayflat Mop Heads With Easy Fit Close Knit Neck. Suitable For Use With Kentucky Mop Handle. Also Suitable For Cleaning In An Autoclave. Synthetic Yarn Is Scientifically Developed For Improved Absorbency, Higher Durability And Less Shrinkage.handles Are Supplied Separately And Should Be Or Dered To Match The Colour Code Of The Mop Head.colours: Blue, Green, Red And Yellow.



    Manufacturer: Cotswold
    ID: Vz.km.45/g
    Category: Cleaning , amp, Hygiene , gt, Cleaning Hardware , gt, Mops
    SKU: Cot9075460k




Drmartens 6904 Tred Men's Black Chukka Safety Boots - Size 8
    Drmartens 6904 Tred Men's Black Chukka Safety Boots - Size 8.

    Airwair Cushioned Sole. 200 Joules Steel Toe Cap Impact Protection. Guards Against Falling Objects And Collisions. Normally Allows Walking On Hot Surfaces Up To 300c. Oil, Petrol, Water, Acid And Alkali Resistant. Sb Classified.manufactured To En Iso 20345:2011.



    Manufacturer: Drmartens
    ID: 6904
    Category: Personal Protection , amp, Clothing , gt, Footwear , gt, Safety Boots , gt, Metal Safety Boots
    SKU: Doc9637088k




Dormer S281 6.00mm Carb Ticn Pl/sk Ml/fl E/mill Lg
    Dormer S281 6.00mm Carb Ticn Pl/sk Ml/fl E/mill Lg.

    S281 Medium Seriestiain-x Coated Plain Shank. For Slotting, Ramping And Diving. K10 Micrograin. To Dormer Standard.diameter: 6mm.flute Length: 13mm.overall Length: 57mm.shank: 6mm.



    Manufacturer: Dormer
    ID: S2816.0
    Category: Cutting Tools , gt, Milling , gt, End Mills , gt, Carbide End Mills - Long Series
    SKU: Dor1612601a




Senator 102 Pce Aluminium Rivet A Ssoertment Kit
    Senator 102 Pce Aluminium Rivet A Ssoertment Kit.

    Supplied In A Transparent Plastic Box.contents:3.2 X 8mm - 203.2 X 9.5mm - 204.0 X 10mm - 204.8 X 9mm - 124.8 X 12.7mm - 124.8 X 16mm - 18



    Manufacturer: Senator
    ID: 72245
    Category: Fasteners , gt, Fastener Assortments
    SKU: Sen6152300k






Auto Parts | Brake | Steering | Auto | Ignition | Belts | Engine | Fuel | Vehicle
Copyright 2018 MotorHolder.com All rights reserved.
With any using link to MotorHolder.com strongly required.