|
|
Stainless Steel Brakes Big Bite Crossed Drilled Brake Rotors - 23163aa3r.
Upgrade The Performance And Look Of Your Braking System With Our Big Bite Cross Drilled And Slotted Rotors. The Precision Drilled Holes Vent Super Heated Gases Eliminating Brake Fade While The Turbo Slots Maintain A Clean Pad Surface For Maximum Grip! Passenger Side Rear;precision Drilled Hole Let Gases Escape;cooler Operating Temperatures Ensure Maximum Friction For Better Stopping Power;improved Braking In Wet Conditions
Manufacturer: Stainless Steel Brakes
ID: 23163aa3r
Category: Brakes , amp, Steering, gt, disc Brake Rotor
SKU: Ssb23163aa3r
|
|
|
Auto Meter Sport-comp Silver Tachometer - 3910.
Red Pointer For Quick Glance Monitoring, Rugged Reliable Performace, Precision Movement And Extreme Accuracy,1 Year Limited Warranty Sport-comp Tachometer;10000 Rpm;for 4/6/8 Cyl. Eng. W/points;electric;and Most 12 Volt High Performance Racing Ignitions
Manufacturer: Auto Meter
ID: 3910
Category: Performance Parts, gt, gauges, gt, tachometer Gauge
SKU: Amg3910
|
|
|
Auto Meter C2 Programmable Speedometer - 7289.
Blue Led Lighting And Translucent White Dial, Provides Ultimate Style And Visibility, Futuristic Red Point Look, Precision Movement And Extreme Accuracy,1 Year Limited Warranty Programmable Speedometer;160 Mph;resetable Trip Odometer;works W/most Factory Sensors
Manufacturer: Auto Meter
ID: 7289
Category: Performance Parts, gt, gauges, gt, air , Fuel Ratio Gauge
SKU: Amg7289
|
|
|
Auto Meter Phantom Ii Mechanical Oil Pressure Gauge - 7521.
Auto Meters Phantom Ii Of Gauges Feature A Unique Twist On The Phantom Design With Its Bright White Dial Featuring Unique Outlined Block Letters With A Led Back Lighting Feature And Glowing Red Needle. Mechanical Oil Pressure Gauge;0 - 100 Psi
Manufacturer: Auto Meter
ID: 7521
Category: Performance Parts, gt, engine Oiling System, gt, engine Oil Pressure Gauge
SKU: Amg7521
|
|
|
Blue Torch Fabworks Cage Tie-in Kit - Btf11086.
The Btf Tj Cage Dash Tie-in Kit Was Designed For Easy Fabrication Of Custom Roll-cages. It Allows You To Run Hard Doors With Your Custom Cage Without Cutting Your Dash Up. It Is Laser Cut From 3/16 High-strenhth Steel Plate. You Will Receive 6 Pieces With This Kit. Simply Bolt The Kit To Your Dash With Stock Hardware And To The Floor (through Your Rocker Guards If You Have Them). The Angled Pieces Allow For A Tube To Pass Between Them Just On Top Of The Dash. This Provides A Great Platform For Your A Pillars To Tie Into. Bare Steel;bolts To The Dash With Stock Hardware;can Use Any Doors;welding Required
Manufacturer: Blue Torch Fabworks
ID: Btf11086
Category: Performance Parts, gt, fittings, Lines , amp, Hardware, gt, tube Fitting
SKU: Btfbtf11086
|
|
|
Crown Automotive Differential Master Overhaul Kit - Crod35maskit.
Differential Master Overhaul Kit; Rear; Incl.p Inion/carrier Bearings/crush Sleeve/oil Seals/cover Gasket/axle Shaft Seals/bearings; Differential Master Overhaul Kit
Manufacturer: Crown Automotive
ID: D35maskit
Category: Replacement Drivetrain Parts, gt, replacement Axle Parts, gt, tj Wrangler Model 30 Front Axle
SKU: Crod35maskit
|
|
|
Dana Spicer Dana 30 Standard 4.27 Ratio Ring And Pinion Kit - 706503-8x.
Dana Spicer Ring And Pinions Are The Same Gears That Came In Your Dana Axle From The Factory. Available In Most Popular Performance And Replacement Ratios. For Use With 3.73 And Up Carrier;requires D/s706016x Dofferential Bearing Kit For Complete Install Kit;includes Pinion Bearings;includs Pinion Seal;includes Pinion Shim Pack;includes Pinion Preload Shim Pack Or Crush Sleeve;includes Pinion Nut;includes Differential Shim Pack;includes Ring Rear Bolts
Manufacturer: Dana Spicer
ID: 706503-8x
Category: Replacement Drivetrain Parts, gt, replacement Axle Parts, gt, vintage Model 30 Front Axle
SKU: D/s706503-8x
|
|
|
Icon Suspension Rear Adjustable Track Bar - 21025.
The Icon Rear Adjustable Track Bar For The 2007-current Jk Will Work On Any Jeep Jk With 2.5 - 4.5 Of Lift. Upgrading Your Jeep Jk Track Bar Is Great For Centering The Rear Axle Allowing It To Track Perfectly Under The Vehicle Vs. Offset To The Side. The Icon Track Bar Contains A Dual Stage Polyurethane / Delrin Bushing Kit On One End That Has Minimal Deflection, And A Rod End With Our Pinch Bolt Housing That Allows On Jeep Adjustability. 2 And 4-door Models;for 2.5-4 Inch Of Lift;easy Install In To Oem Mounts With Application Specific Hardware;on Vehicle Adjustable For Precise Track Alignment;constructed With Cnc Machined And Bent 1-1/4 Inch X .250 Wall 1026 Seamless Dom Tubing;allows For Full Suspension Articulation Without Binding;made In The U.s.a
Manufacturer: Icon Suspension
ID: 21025
Category: Suspension And Shocks, gt, suspension Components, gt, suspension Track Bar
SKU: Ico21025
|
|
|
Jeep Front Bumper Skid Plate (black) - 82212993.
The Mopar Brand Offers A Wide Variety Of Parts And Accessories To Help Make The Most Of Your Vehic Le. There's Hundreds Of Combinations - All Built Mopar Strong! We Also Sell Lifestyle & Off-road Accessories. This Is A Genuine Oem Jeep Part #82212993 And Carries A Factory Warranty. We Offer The Best Online Prices With Fast Shipping With Any Order Placed With Us. 2 And 4-door Models;for Use With Part Number Jep82212929;black Powder Coat;made From Heavy-guage Steel
Manufacturer: Jeep
ID: 82212993
Category: Armor , amp, Protection, gt, skid Plates
SKU: Jep82212993
|
|
|
Mbrp Garage Parts Xp Series Muffler - Gp190425.
These Mufflers Are Designed To Provide You Maximum Performance With Minimum Sound. Garage Parts;xp Series Muffler;single Chambered;t409 Stainless Steel
Manufacturer: Mbrp
ID: Gp190425
Category: Performance Talents, gt, exhaust Systems, Headers, Pipes And Hardware, gt, exhaust Muffler
SKU: Mbrgp190425
|
|
|
Mastercraft Safety 1 Inch Wider 3g Front Seat With Dirtsport Stitch Pattern (black/ Red) - 568022.
The 3g Combines European Styling With Mastercrafts Race Proven Suspension System To Increase Lateral Support - So Important In Todays Racing Conditions. Now Comes Standard With Our Exclusive Dirtsport Stitch Pattern. Design Input And Testing From Racers Curt And Kyle Leduc Along With Superior Engineering And Construction Make Our 3g The Most Advanced Race Seat Available! 1 Inch Wider 3g Seat;dirtsport Stitch Pattern;black;red Fabric Center;red Side Panels;black Band;deep-sided Race Seat;5-point Seatbelt Slots;removable Euro. Style Cushion Standard;does Not Fit Any Mastercraft Standard Mounts
Manufacturer: Mastercraft Safety
ID: 568022
Category: Interior, gt, seating, gt, seats
SKU: Mcs568022
|
|
|
Omix-ada Dana 30 Front Yoke - 16580.03.
Direct Oe Replacement Jeep Parts And Accessories Built To The Original Specifications By Omix-ada. Limited Five Year Manufacturers Warranty. Strap And Bolt Style;yoke Only;dana 30 Front Yoke
Manufacturer: Omix-ada
ID: 16580.03
Category: Replacement Drivterain Parts, gt, replacement Drive Shafts And Parts, gt, xj Cherokee Drive Shafts
SKU: Oai16580.03
|
|
|
Omix-ada Piston Ring Set - 17430.28.
Direct Oe Replacement Jeep Parts And Accessories Built To The Original Specifications By Omix-ada. Limited Five Year Manufacturers Warranty. Amc V8 304 Engine;standard Size;pisston Ring Set
Manufacturer: Omix-ada
ID: 17430.28
Category: Replacement Under Hood Parts, gt, replacement Engine Parts, gt, cj And Full Size V8 Engine Parts
SKU: Oai17430.28
|
|
|
Omix-ada M20 Transfer Case Intermediate Gear - 18672.11.
Direct Oe Replacement Jeep Parts And Accessories Built To The Original Specifications By Omix-ada. Limited Five Year Manufacturers Warranty. 18-5-12, 34-20 Teeth
Manufacturer: Omix-ada
ID: 18672.11
Category: Drivetrain , amp, Differential, gt, transfer Cases And Replacement Parts, gt, alienate Case Intermediate Gear
SKU: Oai18672.11
|
|
|
Go Rhino Srm100 Rack Front Light Plate - 5963001t.
Customize Your Srm100 Rack With A Light Plate That Holds Six 3 Cube Lights. Compatible With Rigid D-series Or Dually;6 Lights
Manufacturer: Go Rhino
ID: 5963001t
Category: Exterior Parts , amp, Car Care , Fender Flares, gt, racks, gt, jeep Roof Rqcks
SKU: Orp5963001t
|
|
|
Poison Spyder Defender Xc Vented Inner Fender Kit (aluminum) - 14-02-099-v.
When Installing Poison Spyder Defenders Xcs, The Inner Fender Kit Provides Splash Protection To The Engine Compartment As Well As A Place To Mount Under-hood Accessories. This Vented Version Also Helps Promote Airflow Through The Engine Bay, Helping Your Jeep Run Cooler. The Inner Fender Kit Also Provides For A Complete, Bolt-in Defender Installation For Those Who Either Do Not Have Their Stock Inner Fenders Or Would Rather Sell Them Than Cut And Re-use Them. Each Inner Fender Is A 3-piece Bolt-together Assembly, Made Of Cnc Laser Cut Aluminum Sheet. Please Note That No Accessory Mounting Holes Or Brackets Are Provided, As Each Installation Is Left To The Discretion Of The Installer To Decide Where To Mount Components. Most Stock Inner Fender-mounted Components Can Be Re-mounted To The Defender Inner Fenders By Simply Drilling A Hole And/or Fabricating A Simple Bracket. Unfortunately, We Have Not Yet Found An Elegant Solution For Retaining The Stock Air Box, So An Aftermarket Air Intake Or Open Air Filter Element (such As A K&n Conical Filter) Is Recommended. Bare Aluminum;requires Poison Spyder Defender Xcs To Install;cnc Laser Cut
Manufacturer: Poison Spyder Customs
ID: 14-02-099-v
Category: Exterior Parts , amp, Car Care , Fender Flares, gt, fenders , amp, Flares, gt, fender Liners
SKU: Psc14-02-099-v
|
|
|
Rubicon Express 2 Inch Spacer Lift Kit - No Shocks - Re7132.
The Re7132 2 Inch Economy Lift Is The Ideal Kit For The Budget Minded Jk Owner Who Needs A Little Extra Clearance To Run 33 Inch Tires For On And Off Road Performance. This Kit Includes 2 Inch Coil Spacsrs For The Front And 1 Coil Spacers For The Rear, In Addition To Shock, Brakeline And Bumpstop Extensions. This 2 Inch Economy Kit Is Quick And Easy To Install, And Gives Your Jk A Nice Bolst To Run Larger Tires And Increase Ground Clearance, All While Maintaining A Factory Ride. Lift Height: 2 Inch;front Coil Spring Spacers;rear Coil Spring Spacers;shock Extensions;bump Stops Spacers;max Tire Size: 35x12.50;wheel 9w,3.75-5.0 B.s
Manufacturer: Rubicon Express
ID: Re7132
Category: Suspension And Shocks, gt, suspension Lift Kits
SKU: R/ere7132
|
|
|
Rancho 2.5 Inch Lift Kit With Rs5000 Shocks - R1131r5.
Ranchos 2.5 Inch Suspension Lift Kit For The Jeep M38 & Cj-3b Features Front & Rear Leaf Springs With U-bolts. This Kit Also Includes 4 Rancho Rs5000 Shocks Tuned Specifically For Your Vehicle And Increases Handling And Performance. If You're Looking For A Suspension Lift Kit That's Engineered To Perform At The Highest Level Off-road & On, Built Tough To Take A Pounding, And Last For The Life Of Your Vehicle, Then Rancho Suspension Has Your Kit. Rancho Has Beeen In The Business Of Providing Rugged Off-road Products For 50 Years, And Is A Leader In Innovative Suspension And Shock Absorber Design. 2.5 Inch Leaf Spring Lift;front And Rear U-bolt Kits And All Necessary Hardware;four Rs5000 Shocks Included
Manufacturer: Rancho
ID: R1131r5
Category: Suspension And Shocks, gt, suspension Lift Kits
SKU: Ranr1131r5
|
|
|
Rock Krawler 3.5 Inch Max Travel System - Stage 2 - Rkslj35mt-s2.
Rock Krawler Suspension Is The Premier Jeep Suspension Manufacturer. Being A True Made In The U.s.a. Company And Take Pride In All Of The Components That Leave Their Doors. They Are Also The North Easts Premier Up-fitter For Jeeps. Over Their Many Years In Business, They Have Built Many Show Quality Jeeps And Also Purpose Built Competition Rigs. Complete Bolt On System;pro Front Sway Bar Disconnects;lower Front Control Arms;upper Rear Control Arms;triple Rate Coil Springs;sport Tuned 2.0 Rrd Spec Prodigy Shocks With Reservoir;lifetime Warranty
Manufacturer: Rock Krawler
ID: Lj35mt-s2
Category: Suspension And Shocks, gt, suspension Lift Kits
SKU: Rkslj35mt--s2
|
|
|
Rt Off-road Complete Soft Top With Upper Soft Doors (black Diamond) - Ct20235t.
Since 1963, Crown Automotive Has Been Providing Outstanding Quality Replacement Parts For Jeep Vehicles. That Same Quality And Experience Can Now Be Found In Our New Line Of Accessories, As Well As Heavy-duty & Performance Components, Called Rt Off-road. Black Diamond;complete Soft Top;models With Half Steel Doors;tinted Windows; Includes:top, Frame, Soft Upper Doors, Windows And Hardware
Manufacturer: Rt Off-road
ID: Ct20235t
Category: Tops , amp, Accessories, gt, jeep Soft Tops
SKU: Rtoct20235t
|
|
|
Rugged Ridge Skid Plate (black) - 18003.5.
Rugged Ridge Offers A Wide Variety Of Skid Plates And Body Protection For Wranglers. You Can Wheel With Confidence Knowing These Skid Plates Will Help Keep You From Acquisition Hung Up On Rocks, Trail Obstacles, While Preventing Damage To Critical Components And Mounts To Existing Body Holes Using The Factory Hardware. It Helps Transfer The Load Of An Impact Away From The Muffler And To The Frame. Damage To The Steering Box Can Put A Serious Damper On A Day Of Wheeling. That's Why Rugged Ridge Offers Piece Of Mind With This Tough Skid Plate. Constructed Of Durable 3/16 Inch Thick Powder Coated Knife With A Rust Resistant E-coating, This Skid Plate Will Keep Rocks And Trail Debris From Damaging Your Steering Box. The Low Profile Design Keeps Ground Clearance At A Maximum. Installation Uses Existing Mounting Locations. 2 And 4-door Models;engine And Transmission;black Powder Coat;drilling Required For Installation
Manufacturer: Rugged Ridge
ID: 18003.50
Category: Armor , amp, Protection, gt, skid Plates
SKU: Rug18003.50
|
|
|
Skyjacker M95 Performance Monotube Shock Absorber - M9501.
Skyjacker's New M95 Monotube Shock Is The Ultimate Shock Absorber For Light Trucks, Jeeps And Suvs. This Single Tube Design Helps Operatingg Temperatures Stay Cooler Under Extreme Conditions. The High Pressure Nitrogen Gas And Floating Piston Technology Combine To Create The Fastest Responding Shock Ever. 2 And 4-door Models;front Shock With No Lift;includes Shock Boot
Manufacturer: Skyjacker
ID: M9501
Category: Suspension And Shocks, gt, shock Absorbers
SKU: Skym9501
|
|
|
Tuff Country Lift Kit W/ Shock - 42701kh.
Lift Kits Are Designed To Add Additional Height To Your Truck Or Suv To Increase Fender Clearance And Allow For Larger Tires. Tuff Country Ez-ride Suspension Has Been Producing Suspension Lift Kits Since 1988. All Tuff Country Lift Kits Are Engineered For The Finest Quality At An Affordable Price. Simple Installation And A Great Ride Are A Trademark Of Our Kits. All Lift Kits Are Backed By A Limited Lifetime Warranty. Lift Kit W/shocks;2.5 Inch Lift;ez-ride;sx6000 Shocks;shock Boots;springs;u-bolts Hardware Bag;brake Line Extension Kit
Manufacturer: Tuff Country
ID: 42701kh
Category: Suspension And Shocks, gt, suspension Lift Kits
SKU: T/c42701kh
|
|
|
Teraflex Rockguard Rock Sliders (bare Aluminum) - 4937310.
Teraflex Rock Sliders Are Constructed From Extruded 6063-t5 Aluminum, Making Them Extremely Strong And Light Weight At The Same Time. They Are Over 1/4 In Key Strength Areas To Provide Structure And Strength. Some Drilling Required. Rubber Beading Is Included To Prevent Any Scuffing Between The Sliders And The Body, Or Silicone Can Also Be Used. Rockguard Rock Sliders;incl. Hardware;unfinished
Manufacturer: Teraflex
ID: 4937310
Category: Armor , amp, Protection, gt, rocker Protection, gt, rock Sliders And Guards
SKU: Ter4937310
|
|
|
Warn Provantage 4500-s Winch - 90451.
When It Comes To A Winch For Your Side X Side, You Need Extra Pulling Power, And This Market-leading Winch Has It In Spades. With A Massive 4,500 Lb. Capacity, All-metal Gear End Housing, And A Powerful Permanent Magnet Motor, This Winch Has The Extra Power To Pull Your Side X Side Or A Heavy Load With Ease. Rated Line Pull = 4500 Lbs.;wincj Motor = 1.9 Hp Permanent Magnet;control = Remote And Dash Mounted Lighted Rocker Switch;gear Train = 3 Stage Planetary;gear Reduction Ratio = 154:1;braking Action = Roller Disk;drum Size = 2.25 Diameter X 4.7 Length;ccable = Synthetic 7/32 X 50' ;fairlead = Aluminum Hawse;overall Dimensions = 14.78 L X 4.53 W X 4.69 H;weight = 15.6 Lbs;limited Lifetime Warranty
Manufacturer: Warn
ID: 90451
Category: Winches And Trail Accessories, gt, winches
SKU: War90451
|
|
|