|
|
Covercraft Block-it 380 Series Jeep Cover (tan) - C16959tt.
This Is Covercrafts Latest Film Barrier Fabric, Offering Great Performance At A Great Price. Its Three-layer Construction Uses Inner And Outer Layers With A Middle Protective Film Barrier. The Film Barrier Has Microscopic Holes, Smaller Than Droplets Of Water And Most Dust Particles To Stop Moisture, But Still Allow Any Moisture Vapor Or Heat To Easily Escape From Under The Cover. Provides Adequate Protection From Rain, Snow, Sun And Dust. Comes With A Three-year Limited Warranty. Available In Tan Only. 2-door Models;tan;3-layer Construction;provides Adequate Protection From Rain, Snow, Sun And Dust;3-year Limited Warranty
Manufacturer: Covercraft
ID: C16959tt
Category: Tops , amp, Accessories, gt, cab Covers, gt, car Covers
SKU: Covc16959tt
|
|
|
Genuine Packages Super Swamper Tsl Bias 29x8.50-15lt Tire And Pro Comp Series 98 Rock Crawler - Gloss Black Monster Mod Wheel Package - Set Of 4 - Tir.
The Super Swamper Tsl With The Patented Tsl Tread Design Offers Unsurpassed Traction Under The Toughest Of Conditions. Nine Years Of Developing And Testing Produced The Ultimate Tire Tread Design. Short, Intermediate And Long Massive Lugs Are Uniquely Arranged, Each Proportioned And Spaced To Bite Quickly And To Self-clean Rapidly. The Overall Design Gives Todays On-and-off-road Driver A Tire That Is Both Directionally And Laterally Stable; Unmatched In Performance. This Is An Extremely Aggressive Design That Requires Strict Attention To Air Pressure When Run On Thhe Highway. **tread Design May Differ By Size** Fits 1987 To 2006 Wrangler, Rubicon And Unlimited;fits 1984 To 2001 Xj Cherokee;fits 1993 To 1998 Zj Grand Cherokee;pro Comp Series 98 Rock Crawler - Gloss Black Monster Mod Wheel;super Swamper 29x8.50-15lt Tire, Tsl Bias;bolt Pattern: 5 On 4.5;backspace: 4.50;center Caps And Lug Nut Kit Included;mounting And Balancing Included;mounted Tire And Wheel Packages Are Non-returnable
Manufacturer: Genuine Packages
ID: Tirepkg298
Category: Tires , amp, Wheels, gt, jeep Tire And Wheel Packages
SKU: Addtirepkg298
|
|
|
Aries Offroad Modular Carbon Steel Front Bumper Kit (black) - 2071031.
Let Us Review The Three Laws Of The Off-roading Code Of Excellence. 1) The Rougher The Terrain, The Greater The Gain. The Aries Modular Bumper Is Built With Carbon Steel And Has A Powder Coat Finish To Challenge Any Terrain. 2) Where There's A Winch, There's A Way. The Aries Modular Bumper Features A Universal Winch Housing To Accept Most Winches And Has Holes For Mounting Tow Hooks. 3) If You Can Still Tell What Color Your Jeep Is, You Have More Mud To Find. The Aries Modular Bumper Is All About Making Your Jeep Look Good, On The Street And On The Trail. It Features A 6-piece, Totally Customizable Design That Can Be Tailored To Your Own Personal Tastes And Off-roading Needs. As Far As The Off-roading Code Of Excellence Is Concerned, The Aries Modular Bumper Is A Model Citizen. 2 And 4-door Models;carbon Steel;textured Black Powdercoat;cutouts And Light Mounting Tabs For Oe Bumper Lights And Auxiliary Lighting;uses Pre-existing Factory Mounting Points For Easy Installation;includes Modular Bumper Parts Ars15600-0, Ars15600-1 And Ars15600-4-2
Manufacturer: Aries Offroad
ID: 2071031
Category: Bumpers, Tire Carriers , amp, Winch Mounts, gt, front Bumpers
SKU: Ars2071031
|
|
|
Beams Replacement 3-point Shoulder Hrness Front Seat Belt In Red - Jptj0306f-27.
Keep Yourself Snug And Safe While Driving Or Trail Riding With These Quality Replacement Seatbelts. If Your Seatbelts Are Worn, Frayed, Or Damaged, They Cannot Provide Adequate Protection For You Or Your Family. Our Seat Belts Meet And Exceed The Federal Motor Vehicle Safety Standards. This Belt Was Engineered To Fit Your 2003-2006 Tjs Front Driver Or Passenger Seat. Sold Individually. Red;retractable 3-point Belt;designed To Meets Federal Motor Vehicle Safety Standards;proudly Tested, Assembled, And Sewn In The U.s.a.;sold Individually
Manufacturer: Beams Industries Inc
ID: Jptj0306f-27
Category: Interior, gt, seating, gt, seat Belts And Harnesses
SKU: Biijptj0306f-27
|
|
|
Be Cool Radiator Mounting Bracket - 72066.
Do You Own A Radiator That's Too Big For Your Stock Support? Well, You've Come To The Right Place. Be Cool Has Designed Aluminum Radiator Br Ackets That Are Perfect For Those Situations. They Aren't Even Drilled, To Give Them That Custom Look. Just Do Your Measuring, Drill The Brackets, And Then Mount Your Radiator. Universal;billet Aluminum;2 Required;sold Individually
Manufacturer: Be Cool
ID: 72066
Category: Heating , amp, Cooling, gt, engine , amp, Transmission Cooling, gt, radiator Mount Bracket
SKU: Bec72066
|
|
|
Bilstein 5100 Series Shock Absorber - 24-186872.
Bilsteins 5100 Series Shocks Offer Traditional Bilstein Technology With Applications For Lifted Trucks, Jeeps And Prerunners. 5100 Series Shocks Feature Bilsteins Superior Single Tube High Gas Pressure Design For The Upmost In Consistent Fade-free Performance And Long Life. Features Include: Monotube Gas Pressure Construction, Self-adjusting Deflecting Disc Valving, High-flow Piston Reduces Harshness, Independent Rebound & Compression Tuning, Larger Working Piston Area For Exact Damping, Superior Control For Large Diameter Tires And Designed For Specific Manufacturer Lift Kits Utilizing The Stock O.e.m. Mounting Configuration. 5100 Series Shock Absorber;collapsed Length (in.): 16.41;extended Length (in.): 27.56;travel Length (in): 11.15;lower Mount: Eye 12.1mm;upper Mount: Stem;shaft Diameter: 14mm;reservoir: No;finish: Zinc Plated;body Design: 46mm Id Smooth Body (non-coilover);internal Design: Mono Tube;boot Included: Yes;sold As: Each
Manufacturer: Bilstein
ID: 24-186872
Category: Suspension And Shocks, gt, shock Absorbers
SKU: Bil24-186872
|
|
|
Crown Automotive Cylinder Head - 53020183.
For Over 50 Years, Crown Automotive Has Been The Leading Manufacturer And Distributor Of Replacement Parts For Jeep Vehicles. With Over 8,000 Different Part Numbers, Including Many Factory-discontinued Items, We Offer You Exceptional Quality That Is Only Matched By An Exceptional Warranty. 2.5l Engine With Carburetor;bare Cylinder Head
Manufacturer: Crown Automotive
ID: 53020183
Category: Replacement Under Hood Parts, gt, replacement Engine Parts, gt, yj Wrangler 2, 5l 4 Cylinder Engine Parts
SKU: Cro53020183
|
|
|
Pro Comp 2 Inch Leveling Lift Kit - 64150.
Pro Co Mp Is The Fastest, Safest, Least Expensive Way To Bring The Front Of Your Vehicle Level With The Rear. This Gives You The Clearance And Ability To Add Wheels And Tires Up To 33 In Dia. Pro Comp Products Do Not Affect The Factory Oem Ride Quality Or Comfort. Thats Why Pro Comp Also Offers A Lifetime Warranty For As Long As You Own Your Vehicle Against Defects For All Of Our Products. Lift Height: 2 Inch;two Strut Spacers;hardware Kit;max Tire Size: 33x12.50
Manufacturer: Pro Comp Suspension
ID: 64150
Category: Suspension And Shocks, gt, leveling Kits, gt, suspension Leveling Kit
SKU: Exp64150
|
|
|
Fabtech Steering Stabilizer Kit - Fts24049.
Fabtechs Performance Steering Stabilizers Utilize The Same Construction As Their Performance Shocks And Are Designed To Wrok Precisely In Conjunction With Fabtech Suspension Systems. Reduce Bump Steer And Wheel Shimmy That Sometimes Occurs When Running Oversized, Aftermarket Wheels And Tires. The Easy Fit, Heavy Duty Bracketry Allows For A Quick And Easy Installation. Available In Single And Double Configurations, Check Your Application For Availability. For 8 Inch Crawler System Only
Manufacturer: Fabtech
ID: Fts24049
Category: Suspension And Shocks, gt, steering Stabilizers, gt, steering Stabilizers
SKU: Fabfts24049
|
|
|
Fabtech Rear Single Traction Bar (black) - Fts94041.
Traction Bars Ae Engineered To Reduce Axle Wrap On Lifted Vehicles, Without Reducing Valuable Ground Clearance Or Suspension Articulation. Engineered To Fit Your Specific Vehicle For Perfect Fit And Easy Installation. The Installation Of This Kit Requires Welding. For Use With Crawler System And Spring-over Axle Systems. Mounting Location: Rear;welding Required;color: Black
Manufacturer: Fabtech
ID: Fts94041
Category: Suspension And Shocks, gt, suspension Components, gt, suspension Traction Bar
SKU: Fabfts94041
|
|
|
Flex-a-lite 7-blade Belt-driven Flex Fan - 1817.
Very Quiet Operation, Stainless Steel Flex Blades, Economical Flex Fan, Great For Thick Ra Diator Application,2.3750 In. Projected Width,8000 Rpm Rating, Standard Mounting Pattern 7-blade;belt-driven Flex Fan;dark Blue/stainless;fan Rotation Cw;made In The U.s.a
Manufacturer: Flex-a-lite
ID: 1817
Category: Heating , amp, Cooling, gt, engine , amp, Transmission Cooling, gt, engine Cooling Fan Blade
SKU: Flx1817
|
|
|
Kargo Master Congo Pro Cage Light Bar Mount Kit - 60305.
Light Up The Night On Any Off Road Adventure With A Tactical Billet-aluminum Lighting Kit. Each Kit Includes (2) 3-piece Machined Brackets That Are Sized Specifically For 1-5/8 Diameter Tubing On The First Gen Congo Cage System. Made Of High-grade Aluminum, Light Weight And Strong. Rust-proof Aluminum Anodized Gray Finish, These Versatile Light Bar Mounts Can Be Bolted And Positioned In A Variety Of Locations Along Our Congo Cage Bar. Gray Anodized Finish;will Not Fade Or Dull;corrosion Resistant;heavy-duty Cnc Aluminum Construction;industrial Grade Fasteners For Added Strength;mount Vertically Or Horizontally On Congo Tubing;nationwide Lifetime Frame Warranty
Manufacturer: Kargo Master
ID: 60305
Category: Exterior Parts , amp, Car Care , Fender Flares, gt, racks, gt, jeep Roof Racks
SKU: Kar60305
|
|
|
King Shocks Oem Performance Coilover Shock Kit For 0 Inch -3.5 Inch Lift Kits - 25001-179.
Kings New Line Of Original Equipment Manufacturer, (oem), Shock Upgrade Kits Provide A Bolt On Suspension System That Elevates Your On And Off-road Performance To Unmatched Levels. Each Kit Has Been Subjected To Punishing Real World Testing To Develop The Optimal Damping Curves And Spring Rates For Your Vehicle. Built With The Same Quality Of Materials And Precise Tolerances Found On Our High Eend Race Shocks Our Oem Upgrade Kits Enable You To Experience The Famous King Ride Quality On Your Daily Driver Or Prerunner. Built With Race Winning Design Features Our Kits Come Complete And Provide Simple 100% Bolt On Installation With No Cutting Or Welding Done To Your Vehicle. Our Front Kits Provide An Adjustable Ride Height And A 25% Increase In Wheel Travel. Rear Kits Allow A 15% Travel Increase. Large 2.5 Diameter Shock Bodies With External Reservoirs Dramatically Increase Fluid Capacity And Heat Dissipation To Provide Sustained Damping Performance Even Under The Most Punishing Conditions. Our Oem Upgrade Shocks Feature The Same Serviceable Design That Allows For Valve Adjustments With Simple Hand Tools Just Like Our Race Shocks. Our Experienced Hock Technicians Are A Phone Call Away To Help Should Any Questions Arise During Installation Or Use. Our Kits Are Available Ready To Bolt Into Stock Vehicles Or With Custom Length Rod End For Vehicles Running Lifted Aftermarket Suspensions. Oem Performance Coilover Shock Kit;front Coilovers W/internal Reservoir;rear Shocks W/piggyback Reservoir;includes Detailed Instructions And All Neecessary Brackets And Hardware.
Manufacturer: King Shocks
ID: 25001-179
Category: Suspension And Shocks, gt, shock Absorbers
SKU: Kst25001-179
|
|
|
Mastercraft Safety 1 Inch Wider Pro 4 Front Seat With Fixed Headrest (black/black) - 565114.
The Pro 4 Is Our Proseat Redesigned With Four Vertical Tabs For Mounting. We Always Want To Provide You With The Safest Racing Seat Possible, So We Strengthened The Mounting Tabs By Integrating Them Up Into The Frame. This, Combined With Mastercraft's Quality And Race Proven Designs, Make Our Pro 4 The Safest And Most Comfortable Four-tab Racing Seat Available. 1 Inch Wider Pro 4 Seat;fixed Headrest;black;black Fabric Removable Cushion;black Side Panels;black Band;brs Stitch Pattern;5-point Seatbelt Slots;requires Custom Mounting Brackets
Manufacturer: Mastercraft Safety
ID: 565114
Category: Interior, gt, seating, gt, seats
SKU: Mcs565114
|
|
|
Mountain Off Road Enterprises Steering Correction Kit Stage One - 9930z.
M.o.r.e. Has Developed This Revolutionary Steering System For 1987-1995 Jeep Yj Wranglers With Spring Over Axle (s.o.a.) Suspensions Systems. This System Is The Answer To Your Steering Problems. Designed For Full Suspension Travel, Without Bind. It Works With Stock Offset Wheels, Or After Market. Simple Bolt On Design, No Welding Required. It Will Work With Stock Leaf Springs Over The Axle, Or, Up To 2.5 Lift Springs Over The Axle. Minor Grinding, Drilling And Tapping Of The Holes Required. Includes: Knuckle Bracket (#9923), Tie Rod & Drag Link Assembly (#9924), And Hardware Kit (#9925). Zinc Plated;to Be Use With Spring Over Axles;includes: Knuckle Bracket, Tie Rod And Drag Link Assembly And Hardware Kit
Manufacturer: Mountain Off Road Enterprises
ID: 9930z
Category: Suspension And Shocks, gt, steering Stabilizers, gt, steering Stabilizers
SKU: Mre9930z
|
|
|
Omix-ada Piston Ring Set - 17430.12.
Direct Oe Replacement Jeep Parts And Accessories Built To The Original Specifications By Omix-ada. Limited Five Year Manufacturers Warranty. 2.5l Engine;.030 Oversize;does 4 Pistons;piston Ring Set
Manufacturer: Omix-ada
ID: 17430.12
Category: Replacement Under Hood Parts, gt, replacement Engine Parts, gt, cj 6 Cylinder Engine Parts
SKU: Oai17430.12
|
|
|
Omix-ada Ax5 Front Bearing Retainer - 18886.02.
Direct Oe Replacement Jeep Parts And Accessories Built To The Original Specifications By Omix-ada. Limited Five Year Manufacturers Warranty. Ax5 Transmission
Manufacturer: Omix-ada
ID: 18886.02
Category: Replacement Drivetrain Parts, gt, replacement Transmission Parts, gt, cj T4 Transmission
SKU: Oai18886.02
|
|
|
Rubicon Express Leaf Spring W/bushing Extreme-duty Rear Xj 4.5 Inch - Re1462.
Rubicon Cherokee Spring Packs Feature All The Qualities That Make Our Extreme-duty Springs So Great. These Have Been Proven By Many Years Of Hard Use And Great Popularity In The Jeepspeed Race Series. 4.5 Inch Lift Springs;leaf Springs Are Sold Individually;bushings Are Included
Manufacturer: Rubicon Express
ID: Re1462
Category: Suspension And Shocks, gt, suspension Components, gt, leaf Springs
SKU: R/ere1462
|
|
|
Rigid Industries Hood Light Bar Mount Kit (black ) - 40332.
The Jeep Jk Light Bar Hood Mounts Allow You To Mount A 10 E-series Or Sr-series Light Bars (not Included) To Your Hood Without The Need To Drill Holes Or Modify Your Hood In Any Way. Made From High Quality, High Strength Stainless Steel And Come Powder-coated Black To Match Your Trim And Our Light Bars. Installation Is Simple And Easy. Attaches Securely To Your Hood Using Your Existing Hinge Mounting Points. This Mount Kit Also Features Rigid Industries' Limited Lifetime Warranty. Please Note That On 2013 And New Model Jeep Wranglers Including The 10th Anniversary Edition, This Bracket Will Cut Off A Portion Of The Washer Spray Pattern. Hood Light Bar Mount Kit
Manufacturer: Rigid Industries
ID: 40332
Category: Lighting , amp, Lighting Accessories, gt, light Bars And Accessories, gt, light Bar Mounting Kit
SKU: Rig40332
|
|
|
Rugged Ridge Spartacus Frront And Rear Bumper Kit (black) - 11544.60.
Designed With The European Consumer In Mind, The Soft Contours Of The Spartacus Stamped Steel Bumpers Produce Some Of The Most Advanced Styling In The Industry. The Stamping Process Also Creates A High Strength 11-gauge Steel Bumper That's Lighter Than Most Aftermarket Bumpers. Both Front And Rear Bumpers Utilize An Adaptable Design That Can Be Easily Changed Between Wide Or Narrow Configurations, Providing Jeep Owners With Two Different Appearances To Accommodate Larger Wheels And Tires As Well As Improved Angles. This Spartacus Bumper Kit Includes The Spartacus Stamped Front And Rear Bumpers, And D-shackles, Everything You Need To Add Functionality And Maximize The Overall Rugged Look On Your Wrangler. Includes Spartacus Front And Rear Bumpers And A Set Of D-rings;high Strength 11-gauge Steel;bumpers Can Easily Be Changed Between Wide Or Narrow Configurations;strong, Light Weight Construction;adaptable Function And Style
Manufacturer: Rugged Ridge
ID: 11544.60
Category: Bumpers, Tire Carriers , amp, Winch Mounts, gt, front Bumpers
SKU: Rug11544.60
|
|
|
Rugged Ridge Windshield Light Mount Kit - 12495.07.
The Perfect Location For Off Road Lighting On Your Wrangler Is On The Factory Windshield Hinge Area. With A Rugged Ridge Windshield Light Mount System You Can Easily Install Two Off Road Lights Without Any Drilling Or Vehicle Modification. These Tough Black Mounts Install Directly Into Factory Mounting Holes And Are Custom Designedf Or Use With The New Rugged Ridge Slim Lights. Each Slim Light Packs A Brilliant 12v 100watt Halogen Bulb Into A Slim Case That Measures Only 2-13/16 Inch Thick By 6 Inch Wide. This Complete Kit Includes Two Black Windshield Mount Light Brackets, Two Halogen Slim Lights, Wiring Harness, Relay, Dash Switch And Two Rock Shields. Everything You Need For Those Night Time Off Road Adventures! All Rugged Ridge Accessories And Lighting Feature An Industry Leading Limited 3-year Warranty. Stainless Steel;5-piece Set;includes Two Black 100 Watt Fog Lights, Windshield Light Mount Brackets, Wiring Harness And Switch
Manufacturer: Rugged Ridge
ID: 12495.07
Category: Lighting , amp, Lighting Accessories, gt, off-road Lighting
SKU: Rug12495.07
|
|
|
T-rex Grilles Upper Class Series Mesh Grille - 54792.
T-rex Is A Billet Grille Manufacturer Dedicated To Delivering A Quality Product. T-rex Specializes On A Specific Market And Caters To The Needs Of The Customer. Focused In The Design Department Is In The Fit And Ease Of Installation Which Mean Bolt-on Billet Grilles With Less Tools And No Cutting Which In Turn Equals More Productivity. When It Comes To Manufacturing A Quality Product, It Starts In The Design Department But It Doesn't End There. T-rex Starts With Solid Stock Of Aircraft Quality T-5 Or T-6 Billet Aluminum Rather Than Extruded Aluminum As Usde By Some Competitors. Every Billet Grille Is Treated To A Durable Glossy Powder-coat. The Final Stage Of Manufacturing Includes A Three-stage Polishing And Cleaning. The Entire Process Takes Place In Their Southern California Manufacturing Facility. Upper Class Series;mesh Grille;polished Stainless Steel;w/ Oe Logo Plate
Manufacturer: T-rex Grilles
ID: 54792
Category: Exterior Parts , amp, Car Care, gt, grilles, gt, grille Insert
SKU: T/r54792
|
|
|
Trail Gear 3 Inch Lift Rear Leaf Springs - 110054-3-kit.
Front And Rear Suzuki Samurai Leaf Springs. Provides 3 Of Lift. High Quality, Great Price! Military Wrap On Fix End. Spring Pin Set Up For Spring Under Configuration. Each Kit Includes Front Or Rear Springs. Rear;sold As A Pair;3 Inch Of Lift;military Wrap
Manufacturer: Trail Gear
ID: 110054-3-kit
Category: Suspension And Shocks, gt, suspension Components, gt, leaf Springs
SKU: Tgi110054-3-kit
|
|
|
Trail Gear Dana 60 Drive Flange Kit - 144007-kit.
Trail Gears Heavy Duty Drive Flanges For Dana 60 Solid Front Axles Are Much Stronger Then Factory Drive Flanges Or Lock Out Hubs. Flanges Feature A Larger Center Section With More Support For The Splines. These Heavy Duty Drive Flanges Are Made From Hardened Tool Steel (4340 Chromoly) And Hold Up Much Better To The Kinds Of Toque Possible With Todays Heavy Duty Aftermarket Axles. Dana 60 Axles
Manufacturer: Trail Gear
ID: 144007-kit
Category: Drivetrain , amp, Differential, gt, jeep Oem Replacement Axle Parts, gt, axle Hub Flange
SKU: Tgi144007-kit
|
|
|
Moto Metal Mo959, 18x9 Wheel With 8 On 6.5 Bolt Pattern - Black - Mo95989080712.
Moto Metal Builds Wheels That Are Of The Highest Quality Available. Motocross Inspired With Style And Quality Like No Other. Fast Becoming One Of The Most Popular Line Of Wheels For Trucks And Suvs. Hubcentric Ring Included Where Applicable. Wheel Size: 18x9;bolt Pattern: 8 On 6.5;offset: 12;backspace: 4.53;max Load: 3600;finish: Black
Manufacturer: Moto Metal
ID: Mo95989080712
Category: Tires , amp, Wheels, gt, wheels
SKU: W/pmo95989080712
|
|
|