|
|
Omix-ada Steel Body Kit - 12001.15.
Kit Includes: Body Tub, 2 Fenders, Tailgate And Windshield Frame. Replacement Steel Body Parts Are Sold As Is. Some Minor Imperfections Or Damage Can Occur During Shipping. Professional Installation Recommended. Claims For Freight Damage Must Be Placed Directly With Freight Carriers. Body Tub, 2 Fenders, Tailgate And Windshield Frame;steel Body Kit
Manufacturer: Omix-ada
ID: 12001.15
Category: Body Tubs , amp, Frames, gt, body Tubs, gt, body Tub
SKU: Oai12001.15
|
|
|
Bilstein 5100 Series Ride Height Adjustable Shock Absorber - 24-225793.
Bilstein 5100 Series Ride Height Adjustable Shock Absorbers Are Designed For Front Coilover Style Pickup Suspensions. The Monotube Shocks Feature A 46mm Digressive Piston With Self-adjusting Deflective Disc Valving. Multiple Snap-ring Grooves In The Shock Body Allow For Different Spring Seat Positions, Providing 0-2.5 Of Front End Lift, Depending On Application. Provides Increased Wheel Travel And Impeoved Handling! Lift Height: .75 To 2 Inch;5100 Series Ride Height Adjustable Shock Absorber;collapsed Length (in.): 13.35;extended Length (in.): 19.20;finish: Zinc Plated
Manufacturer: Bilstein
ID: 24-225793
Category: Suspension And Shocks, gt, shock Absorbers
SKU: Bil24-225793
|
|
|
Crown Automotive Fog Lamp Set - 4713582k.
For Over 50 Years, Crown Automotive Has Been The Leading Manufacturer And Distributor Of Replacement Parts For Jeep Vehicles. With Over 8,000 Different Part Numbers, Including Many Factory-discontinued Items, We Offer You Exceptional Quality That Is Only Matched By An Exceptional Warranty. Includes 2 Lamps With Clear Lens;covers Not Included;fog Lamp Set
Manufacturer: Crown Automotive
ID: 4713582k
Category: Lighting , amp, Lighting Accessories, gt, fog Lights
SKU: Cro4713582k
|
|
|
Crown Automotive Rear Exhaust Manifold (natural) - 53010199.
For Over 50 Years, Crown Automotive Has Been Hte Leading Manufacturer And Distributor Of Replacement Parts For Jeep Vehicles. With Over 8,000 Different Part Numbers, Including Many Factory-discontinued Items, We Offer You Exceptional Quality That Is Only Matched By An Exceptional Warranty. 4.0l Engine;state Legal: 49 State;in California, This Part May Not Be Used Upon A Highway And May Only Be Used For Race Purposes;exhaust Manfiold
Manufacturer: Crown Automotive
ID: 53010199
Category: Replacement Under Hood Parts, gt, replacement Exhaust, gt, sj Full Size Replacement Exhaust
SKU: Cro53010199
|
|
|
Crown Automotive Chrysler 8.25 Rear Passenger Axle Shaft - 52114077aa.
For Over 50 Years, Crown Automotive Has Been The Leading Manufacturer And Distributor Of Replacement Parts For Jeep Vehicles. With Over 8,000 Different Part Numbers, Including Many Factory-discontinued Items, They Offer You Exceptional Quality That Is Only Matched By An Exceptional Warranty. 8.25 Inch Rear Axle And Standard Differential;passenger Side Rear
Manufacturer: Crown Automotive
ID: 52114077aa
Category: Drivetrain , amp, Differential, gt, axle Shaft
SKU: Cro52114077aa
|
|
|
Currie Johnny Joint Control Arm Set With Double Adjustable Uppers - Ce-9100as.
Johnny Joint Control Arms Are Fully Adjustable So That You Are Able To Adjust Your Pinion Angle After A Lift Is Installed. The Arms Are Fabricated Out Of 1 1/4in. Heavy Wall D.o.m. Tubing And Feature The Johnny Joints On Both Ends Of The Arms. 1 Inch X .156 Inch Wall D.o.m. Tubing;semi-gloss Black Powdercoat;johnny Joint Is Used At Both Ends Of All 4 Of The Rear Arms
Manufacturer: Currie
ID: Ce-9190as
Category: Suspension And Shocks, gt, suspension Components, gt, suspension Control Arms
SKU: Curce-9100as
|
|
|
Dee-zee Specialty Series Liquid Transfer Tank (bare Aluminum) - Dz91752.
Dee Zee Has A Variety Of Liquid Transfer Tanks In A Variety Of Configurations Including Transfer Tank, Toolbox Combos To Meet Your Rigs Liquid Cargo Hauling Needs. Specialty Series;liquid Transfer Tank;.125 Aluminum Brite-tread Uncoated;volume 38 Gallons
Manufacturer: Dee-zee
ID: Dz91752
Category: Performance Parts, gt, fuel Tanks , amp, Fuel Tank Hardware, gt, liquid Transfer Tank
SKU: Deedz91752
|
|
|
Fab Fours Rock Sliders (bare Steel) - Jk07-g1250-b.
With 3/16 Formed Body Construction, This Rock Slider Is Built The Right Way! Don't Settle For Floating Tube Below The Jk Body. Fab Fours Matched The Radius Of The Jk Body With A Vertical Plate Creating The Traditional Body Protection That We All Know Works! Tying In To The Body Mounts And 15 Places Per Side On The Body Delivers The Ultimate Rocker Panel Protection. You Are Driving The Best Jeep Ever Made, Protect It With The Best Slider.. Fab Fours. Dubbed Essentially A Side Bumper You Will Not Be Disappointed With The Engineering And Craftsmanship In These Sliders. Finished Off With A Full Length Tig Weld Down The Flange, No Corner Was Cut. 4-door Models;bare Steel;fab Fours Signature Knife Edge Theme;top Surface Doubles As Entry Step;stainless Fasteners;does Not Limit Tire Size;works With Most Aftermarket Fender Flares
Manufacturer: Fab Fours
ID: Jk07-g1250-b
Category: Armor , amp, Protection, gt, rocker Protection, gt, rock Sliders And Guards
SKU: Ffijk07-g1250-b
|
|
|
Fab Fours Full Metal Jacket Stubby Winch Front Bumper Without Grill Guard (black) - Jk07-b1855-l.
Building On Their Reputation For The Highest Quality And Design In The Truck Market, The Fab Fours' Premium Winch Bumper Focuses On Strength And Durability. This Bumper Is Designed To Be The Ultimate In Functionally-stylish Front End Protection While Also Providing More Tire Clearance To Eliminate Rubbing. Key Features Include The Integrated Fog And Turn Lights, Air Ducts, D-ring Mounts And Ability To Accommodate Up To 10,000 Lb. Winches. Available With A Guard Or Base Bumper. 2 And 4-door Models;2 Stage Black Powder Coat;designed For Maximum Tire Clearance; Optional Winch Plate (jpwp-1) Or Optional Winch Modifier (jk07-b1859-1); Accepts Up To 10,000 Lb. Winches Or Smaller; Accepts The Warn Power Plant And Zeon Winches; Light Cut Outs For Factory Fog Lights; Optional Cutouts For 2x2 Rigid Industries Surface Mount ?dually? Lights (not Included); 3/4 D-ring Mounts; 2 Stage Matte Black Powder Coat Or Bare Steel (-b Instead Of -1); 3/16 Tseel Construction; 100% Made In The Usa
Manufacturer: Fab Fours
ID: Jk07-b1855-1
Category: Bumpers, Tire Carriers , amp, Winch Mounts, gt, front Bumpers
SKU: Ffijk07-b1855-1
|
|
|
Jcroffroad Crusader Rock Sliders With Led Rock Lights (ba Re Steel) - Jksl-crl4d-b.
Jcroffroads Crusader Rock Sliders Are A Triple Threat All Built Into The Same Package; A Trail Proven Rock Slider, A Usable Step And Off-road Rock Lights! Bare Steel;cnc Cut And Formed From 3/16 Inch Steel;built In Hi-lift Jacking Points Front And Rear;built In Led Rock Lights (lights Included;mounts Using The Lower Body Mounts And An Additional 18 Body Attachment Points;includes Mounting Hardware;includes Jcroff-road Sticker;sold As A Pair;hand Built In The Usa;mfg Sku: Jksl-crl-4d-bare
Manufacturer: Jcroffroad
ID: Jksl-crl4d-b
Category: Armor , amp, Protection, gt, rocker Protection, gt, rock Sliders And Guards
SKU: Jcrjksl-crl4d-b
|
|
|
Kentrol Exterior Dress Up Kit - 97tjssacc.
Why Buy Kentrol Stainless Steel? Because It Is The Best! Not All Stainless Steel Products Are Created Equal. Kentrol Proudcts Are Constructed Of Virgin Metal, 304 Surgical, Stainless Steel. This Stuff Just Will Not Rust! It Is Easy To Care For Too - An Occasional Waxing Will Keep The Mirror-like Shine Looking Brand New. And To Top It Off - All Kentrol Products Come Complete With Stainless Steel Hardware. Stainless Steel;includes: Hood Set, Door Hinge Set, Windshield Hinge Set And Tailgate Hinge Set
Manufacturer: Kentrol
ID: 97tjssacc
Category: Exterior Parts , amp, Car Care, gt, exterior Billet Accessories, gt, exterior Trim Kit
SKU: Ken97tjssacc
|
|
|
Lrg Rims Lrg111, 20x9 Wheel With 6 On 5.5 Bolt Pattern - Machine Face With Black Lip - 11129083300.
Lets Face It; It Is All About The Rims. Whether You Are Looking For Stock Replacements Or Some Of The Most Aggressive Fitments On The Market, Lrg Rims Is The Answer. A Perfect Blend Of Attitude, Form, And Function, Lrg Rims Provide A Quality Wheel With Cutting Edge Style Guaranteed To Make A Statement. Lrg Rims. Coming Up Big. Wheel Size: 20x9;bolt Pattern: 6 On 5.5;backspace: 5;offset: 0;max Load: 2200;finish: Machine Face With Black Lip;replacement Center Cap Part Number: Lrg5111655000
Manufacturer: Lrg Rims
ID: 11129083300
Category: Tires , amp, Wheels, gt, wheels
SKU: Lrg11129083300
|
|
|
Mountain Off Road Enterprises Shackle Reverse System - 7686-4.
Why Install A S.r.s.? Because It Allows The Front Suspension To Travel In A Much More Natural Action When The Spring Compresses. In Stock Form (shackles In Front Of The Front Axle) When The Front Tire Comes In Contact With An Obstruction, The Impact Is Partially Transmitted Back To The Frame Via The Solid Rear Pivot Point. Reversing The Pivot Point To A Point In Front Of The Axle Allows The Impact To Be Better Absorbed By The Spring And Shackle. The Result Is A More Natural Suspension Flow Over The Obstacle. At Higher Speeds, A Smoother Ride And Improved Handling Is Noticeable, As Well As Less Wandering And Darting. The S.r.s. Has A Very Important Design Feature Built Into The New Front Pivot Brackets. They Move The Front Axle Forward From The Stock Position, So That During Spring Compression Over Obstacles The Tire Will Be Less Likely To Contact The Fender. Due To The Action Of This Suspension Movement, The Front Drive Shaft Needs To Have More Slip-yoke Travel Than Stock. You Will Need To Have A Longer Travel Slip-yoke Installed By A Professional Drive Shaft Builder. A Stock Pitman Arm Also Should Be Retained (no Drop). Kit Includes All Necessary Brackets And Hardware. Leaf Spring Shackle Reverse System;standard;for Use W/2 In Wide Springs;powdercoated Black
Manufacturer: Mountain Off Road Enterprises
ID: 7686-4
Category: Suspension And Shocks, gt, suspension Components, gt, leaf Spring Shackle Kit
SKU: Mre7686-4
|
|
|
Go Rhino Brj40 Front Bumper And Full End Caps (textured) - 230120t.
The Go Rhino Brj40 Front Bumper Is The Ultimate Modular Bumper For The Jeep Wrangler Jk. Completing The Brj40 Front Bumper Is A Full End Cap That Lines Up With The Front Fenders And Fills Out The Front End Of The Jeep. 2 And 4-door Models;textured Black;center Section;winch Ready;integrated Steel Locking Drawer;allows Installation Of Factory Or Aftermarket Led Lights
Manufacturer: Go Rhino
ID: 230120t
Category: Bumpers, Tire Carriers , amp, Winch Mounts, gt, front Bumpers
SKU: Orp230120t
|
|
|
Piaa Lp560 6 Inch Led Driving Light Kit, Sae Compliant - 5672.
The Piaa 560 Six Inch Led Long Range Driving Lights. Reflector-facing Leds Project Off Of An Ingenious Computer-designed Multi-surface Reflector Offering More And Better Illumination Than Halogen Lights With The Durability And Low Power Draw Of Led Lighting. Poly-carbonate And Cast Aluminum Housing With Poly-carbonate Lens. Kit Includes Two Lights Mounting Brackets Complete Wiring Harness And Detailed Installation Instructions. More Controlled Beam Pattern Directing The Light Exactly Where You Need It;lower Power Consumption Than Traditional Forward Facing Led Lights;bright 6000k White Light That Replicates Daylight To Illuminate The Road And The Trail;compact And Durable, With The Cast Aluminum Housings And Polycarbonate Lenses;sae Compliance In Driving Beam;kit Includes Two Lamps, Mesh Grill Covers, And Complete Wiring Harness;5-15/16 Inch Dia. X 3-9/16 Inch Deep
Manufacturer: Piaa Lighting
ID: 05672
Category: Lighting , amp, Lighting Accessories, gt, driving Lights
SKU: Pia05672
|
|
|
Rugged Ridge Hood Light Bar Kit - 11232.06.
Looking For Additional Locations To Mount Your Led Lights While You're On The Trails? The Rugged Ridge Jk Hood Light Bar Mounts To The Top Of Your Hood Using Existing Oe Hardware And 4 Mounting Locations On The Hood. Featuring Heavy Duty Coated Black Steel Construction, This Light Bar Offers Everything You Need! 2 And 4-door Models;black;4-piece Kit;includes Three Black Round Led Lights And Hood Light Bar;each Led Draws 18 Watts
Manufacturer: Rugged Ridge
ID: 11232.06
Category: Lighting , amp, Lighting Accessories, gt, light Bars And Accessories, gt, light Bars
SKU: Rug11232.06
|
|
|
Rugged Ridge Hood Light Bar Kit With 3 Round Led Lights - 11232.13.
Looking For Additional Locations To Mount Your Led Lights While You're On The Trails? The Rugged Ridge Jk Hood Light Bar Is An Easy Bolt On Piece, And Mounts To The Top Of Your Hood Using Existing Oe Hardware And 5 Light Mounting Locations. Featuring A Textured Black Powder Coated Finish For A Long Lasting Use, This Light Bar Offers Everything You Need.2 And 4-door Models;textured Black;includes 3 Round Led Lights;mounts To The Top Of Your Hood;uess Existing Oe Hardware;5 Light Mounting Locations
Manufacturer: Rugged Ridge
ID: 11232.13
Category: Lighting , amp, Lighting Accessories, gt, light Bars And Accessories, gt, light Bars
SKU: Rug11232.133
|
|
|
Rugged Ridge Sierra Reclining Front Seat (black) - 13447.15.
Finally A Seating Design That Fits The Xj Cherokee Without The Use Of An Add-on Adapter Bracket. This Revolutionary New Patent Pending Design Is The First True Replacement Seating Up- Grade In The Last 30 Years! By Offering A Model Year Specific Program For Late Model Cherokee, The Consumer Only Needs To Purchase The Replacement Seat And Not Be Bothered With Those Expensive Add-on Adapter Brackets. Furthermore, While Developing These New Designs, We Up-graded Specific Components Of The Seats Creating The Most Durable Seating Program On The Market Today. Now You Can Offer A Complete Replacement Seating Solution For All 1984 To 2001 Xj Cherokees. The Xhd Seats, Though They Look Similar, Are An Up-grade To Our Current Designs. Low Cost Seat Replacement Option. Style Matches The Original Jeep Look With Horizontal Stitching And Infinite Recline Mechanism. Constructed Of Durable Automotive Grade Textured Vinyl. Sierra Seat;xhd;front;black Denim;reclining;brackets Included
Manufacturer: Rugged Ridge
ID: 13447.15
Category: Interior, gt, seating, gt, seats
SKU: Rug13447.15
|
|
|
Smittybilt G.e.a.r. Tailgate Cover, Olive Drab - 5662231.
Complete The Look And Get Organized. Manufactured From 600 Denier Polyester And Designed To Match The R Est Of The G.e.a.r. Line. 100% Interchangeable Pal/molle Compatible Pouches Included. Olive Drab;2 Large Storage Pouches;600 Denier Polyester With Pvc Liner;interchangeable With Pal/molle Pouches
Manufacturer: Smittybilt
ID: 5662231
Category: Interior, gt, storage , amp, Organizers, gt, tailgate Covers And Storage
SKU: S/b5662231
|
|
|
Smittybilt Extended Top (black Diamond) - 94535.
Smittybilts Extended Tops Are Manufactured Using The Most Durable, High Quality Components And Designed For A Perfect Fit That Provides A Quick And Easy Installation. Give Your Jeep Wrangler A Rugged, Off-road Look And Keep You And Your Passengers Out Of The Elements. With A Variety F Colors Available, Along With Convenient And Functional Features, Smittybilt Has All The Soft Goods You Need To Help Make Driving Your Wrangler A Truly Gratifying Experience. 4-door Models;black Diamond;requires Quick Detach Header (90105);covers Front And Rear Seats;attaches To Rear Sports Bar With J-clips
Manufacturer: Smittybilt
ID: 94535
Category: Tops , amp, Accessories, gt, bikini Tops
SKU: S/b94535
|
|
|
Smittybilt Wheel To Wheel Nerf Steps W/cleated Steps Black (textured Black) - J1246.
For The Latest In Style, Quality, And Function, Smittybilt Nerf Steps Deliver An Innovative Design That Is Ideal For Lifted Truck Applications. These Heavy Duty Steps Will Protect Your Vehicles Rocker Panels And Can Handle Weights Of Up To 445 Pounds. Smittybilts Nerf Steps Are A One-piece Unit That Bolts Right Onto Your Vehicles Frame Without Having To Pre-assemble Brackets, Which Means A Quick And Easy Installation. 2-door Models;black Powder Coaat;wheel-to-wheel Coverage
Manufacturer: Smittybilt
ID: J1246
Category: Side Steps , amp, Running Boards, gt, nerf Bars , amp, Steps, gt, step Nerf Bar
SKU: S/bj1246
|
|
|
Trail Master 2.0 Inch Lift Kit With Ngs Shocks - Tm3420-20013.
Trail Master Suspension Systems Are Uniquely Designed To Allow Vehicles To Take On The Most Extreme Off-road Trails, Yet Remain Quiet And Dependable For Everyday Driving. To Do This, We Design Our Systems To Limit Excessive Wear And Tear On Factory Ball-joints, Steering Components And Reduce Noise And Vibrations. Making Sure Everything Is Durable And Reliable Is Why Our Suspension Systems Include Items Such As, High-grade Alloy Steel- Tube Control Arms, Flex-joint Bushing Technology, Precision Laser Cut Bolt-holes, Cnc Machined Spindles, Cnc Press-brake Formed Brackets, And Much More. Our Suspension Systems Also Come Complete With Everything Required To Properly Raise Your Vehicle Without Having To Order Or Purchase Extra Components. Find Out Why More People Prefer A Quality Trail Master Suspension, Than Other Suspension Kits On The Market. Lift Height: 2.0 Inch;front Coil Spring Spacers;rear Coil Spring Spacers;ngs Shocks;easy Installation;max Tire Size: 32x11.50;all Trailmaster Kits Include A Lifetime Warranty
Manufacturer: Trail Master
ID: Tm3420-20013
Category: Suspension And Shocks, gt, suspension Lift Kits
SKU: T/mtm3420-20013
|
|
|
United Ignition Wire Corp 4wd Hei Billet Distributor - 6519-1.
4wd Hardware Billet Distributors Main Body Is Machined From A Single Piece Of High Strength Aircraft Quality Aluminum And Stuffed Full Of Top Shelf Electronics To Provide You With A Strong And Reliable Ignition System. Red;amc V8 Engine;290-304-343-360-390-401 C.i.;produces 50,000 Volts;allows Sprak Plug Gaps To Be Opened Up To .050 - .055;includes Distributor Drive Gear;purchase #30809 Power Lead And #30813 Tachometer Lead Pigtails For An Easy Installation; Will Not Work With Factory Tachometer
Manufacturer: 4wheel Drive Hardware
ID: 6519-1
Category: Electrical, gt, ignition , amp, Tune Up Kits, gt, distributor
SKU: Uiw6519-1
|
|
|
American Racing Ar708, 22x9.5 Wheel With 6 On 5.5 Bolt Pattern - Bright Pvd (chrome) - Ar70822968820.
American Racing Equipment, Inc. Is The Largest Wheel Company In The World, Distributing More Than 1.5 Million Wheels Annually Through Manufacturing Facilities, Company-owned, Satellite-connected Warehouses, An Independent Distributor System In The United States And Through International Distributors In More Than 20 Countries On Four Continents. Wheel Size: 22x9.5;bolt Pattern: 6 On 5.5;offset: 20;backspace: 6.04;max Load: 3600;center Bore: 106.25;finish: Bright Pvd
Manufacturer: American Racing Wheels
ID: Ar70822968820
Category: Tires , amp, Wheels, gt, wheels
SKU: W/par70822968820
|
|
|
Warn Industrial Wire Rope Tension Kit - 31149.
Warns Industrial Wire Rope Tensioner Kit Prevents Wire Rope Tangling When Free Spooling, Assists In Uniform Wre Spooling, Designed For Quick And Easy Installation. 10 Drum. For Warn Industrial Winches Only. Works With All Warn Industrial Winches;10 Drum;quick And Easy Installation;prevents Wire Rope Tangling When Freespooling
Manufacturer: Warn
ID: 31149
Category: Winches And Trail Accessories, gt, winches
SKU: War31149
|
|
|