|
|
Kargo Master Tombstone Mount - 60223.
Hard Anodized Billet Aluminum Load Bar Mounting Bracket. Used To Install A 1.125 Round Load Bar On Any Of Oour Platform Racks Or On Most Surfaces. Provides A 3.25 Rise For Easy Installation Of Most Common Accessories. Sodl As A Pair. For Use With Kargo Master Baskets;hard Anodized Billet Aluminum;3.25 Rise;sold As A Pair
Manufacturer: Kargo Master
ID: 60223
Category: Exterior Parts , amp, Car Care , Fender Flares, gt, racks, gt, roof Rack Mount Kit
SKU: Kar60223
|
|
|
Genuine Packages Differential Covers And Oil Pack - Tjd30d35difc.
G2 Aluminum Differential Covers Are Designed To Not Only Protect Your Ring & Pinion, They Are Designed To Help Cool Your Gear Oil For Prolonged Bearing Life. Made From High Strength Heat Treated Aluminum To Withstand Direct Hits, These Covers Help Protect Your Investment While Adding A Distinct Look To Your Vehicle. Dana 30 G-2 Aluminum Differential Cover;dana 35 G-2 Aluminum Differential Cover;synthetic 75w-90 Gear Oil (3)
Manufacturer: Genuine Packages
ID: Tjd30d35difc
Category: Drivetrain , amp, Differential, gt, differential Covers
SKU: Addtjd30d35difc
|
|
|
Afe Power Magnumflow Iaf Pro 5r Air Filter - 24-91100.
Afes High Performance, High Flow Air Filter Replaces The Restrictive Factory Paper Filters And Lets Your Engine Pause Better. Paper Filters Do A Good Job In Keeping Dirt Out But Can Clogged Easily So That They Need To Be Replaced Frequently. Foam Filters Also Clog Easily. A Washable/reusable, Cotton Gauze Filter Like Ours Allows More Airflow And Is Washable And Reusable. Magnumflow Iaf Pro 5r Air Filter;oiled;inverted
Manufacturer: Afe Power
ID: 24-91100
Category: Performance Parts, gt, intake Kits, Air Filter , amp, Throttle Body Spacers, gt, air Filter
SKU: Afe24-91100
|
|
|
Alloy Usa Dana 44 Chromoly Rear Axle Kit - 12136.
High Tensile Strength 4340 Chomolyis Heat-treated Twice To Produce These Heavy-duty Axles That Are Up To 40% Stronger. Exclusive 10-year Warranty. Grande Rear Axle Shaft Kit;dana 44 Jeep Tj 97 And Up Grande Axle Kit;for Use With After Market 33 Spline Carrier;chromoly Axle Shafts;wheel Bearing And Seal Kits;wheel Studs;10 Year Warranty
Manufacturer: Alloy Usa
ID: 12136
Category: , gt, gt, axle Shaft Assembly
SKU: Aly12136
|
|
|
Auto Meter Pro-comp Liquid-filled Mechanical Pressure Gauge - 5425.
Bronze Bourdon Tube 270 Degree Sweep Movements And Durable Nylon Gearing Have Made These Rugged And Long Lasting Gauges A Procen High Performance Favorite For Over 50 Years. These Mechanical Gauges Require No Electrical Power For Operation Making Them An Liquid-filled Mechanical Pressure Gauge;0 - 600 Psi;requires #4 Braided Hose Kit
Manufacturer: Auto Meter
ID: 5425
Category: Performance Parts, gt, gauges, gt, universal Pressure Gauges
SKU: Amg5425
|
|
|
Auto Meter Pro-comp Electric Oil Pressure Gauge - 5427.
Red Pointer For Quick Glance Monitoring, Safeguard Against Dangerous Conditions, Precision Movement And Extreme Accuracy,1 Year Limited Warranty Electric Oil Pressure Gauge;0 - 100 Psi;air-core Meter Movement
Manufacturer: Auto Meter
ID: 5427
Category: Performance Parts, gt, engine Oiling System, gt, engine Oil Pressure Gauge
SKU: Amg5427
|
|
|
Auto Meter Ultra-lite Ii Programmable Speedometer - 4989.
Intense Through The Dial White Led Lighting, Brilliant Led Lit Pointer For Maximum Visibility, Reverse Lighting Effect,1 Year Limited Warranty Programmable Speedometer;0 -160 Mph
Manufacturer: Auto Meter
ID: 4989
Category: Performance Parts, gt, gauges, gt, speedometer Gauge
SKU: Amg4989
|
|
|
Borla Cat-back System - 140461.
With 30 Years Of Race-proven Engineering Behind Them Borla Is One Of The Premier Manufacturers Of Performance Exhaust Systems In The World. Manufactured From High Quality Materials And With The Latest Technology Borla Provides You With Just What You Are Looking For, Sound, Performance And Looks. Borla S Signature Sound Is Well Recognized By Automotive Enthusiasts Around The World. Join The Winning Team With A Quality Borla Exhaust System. 4-door Models;3.6l 6 Cylinder Engine;cat-back System;single Rear Exit
Manufacturer: Borla
ID: 140461
Category: Performance Parts, gt, exhaust Systems, Headers, Pipes And Hardware, gt, exhaust System Kit
SKU: Bor140461
|
|
|
Crown Automotive Power Steering Hose Kit - 52088620af.
For Over 50 Years, Crown Automotive Has Been The Leading Manufacturer And Distributor Of Replacement Parts For Jeep Vehicles. With Over 8,000 Different Part Numbers, Including Many Factory-discontinued Items, They Offer You Exceptional Quality That Iis Only Matched By An Exceptional Warranty. Right Hand Drive (rhd) Models;power Steering Pressure And Return Hose Combo Kit
Manufacturer: Crown Automotive
ID: 52088620af
Category: Replacement Brakes, Steering And Suspension Parts, gt, replacement Steering Parts, gt, xj Cherokee Replacement Steering
SKU: Cro52088620af
|
|
|
Crown Automotive T176 And T177 2nd Gear - J8132383.
For Over 50 Years, Crown Automotive Has Been The Leading Manufacturer And Distributor Of Replacement Parts For Jeep Vehicles. With Over 8,000 Different Part Numbers, Including Many Factory-discontinued Items, We Offer You Exceptional Quality That Is Only Matched By An Exceptional Warranty. T176 Or T177 Transmissions;2nd Gear
Manufacturer: Crown Automotive
ID: J8132383
Category: Replacement Drivetrain Parts, gt, replacement Transmission Parts, gt, mj Comanche Ax4, ax5 Transmission
SKU: Croj8132383
|
|
|
Fastway Trailer Products 0-4 Inch Drop Adjustable Ball Mount (polished) - Dt-stbm6400.
These Super Light Weight Adjustable Billet Aluminum Ball Mounts Ade Machined From Aircraft Grade High Strength Billet Aluminum For Maximum Strength And Reliability. You Can Use These Ball Mounts With Multiple Trailers By Simply Adjusting The Ball To The Proper Height. The Most Unique Features Of These Ball Mounts In Fastways Unique Spring Loaded Stainless Steel Anti Rattle Balls That Take Up The Slack In Your Receiver And Virtually Eliminate Any Chance Of Rattling. Sliding One Piece Billet Ball Mount;unique Spring Loaded Stainless Steel Anti Rattle System;machined From One Piece Billet Aluminum
Manufacturer: Fastway Trailer Products
ID: Dt-stbm6400
Category: Towing, gt, drop Hitches , amp, Ball Mounts, gt, trailer Hitch Ball Mount
SKU: Dtmdt-stbm6400
|
|
|
Move Sideways Eas Turbo Timer - 98612.
A Turbo Timer Is A Device Designed To Keep An Engine Running For A Pre-specified Period Of Time Or A Until A Specific Temperature Is Reached In Order To Automatically Execute The Cool-down Period Required To Prevent Premature Turbo Wear And Failure. This Also Allows The Lubricating Oil From The Engine To Circulate Properly So The Turbine Won't Burn The Lubricating Oil That Would Otherwise Be Trapped Within The Charger With The Turbine Rotating At High Speed. Edge Accessory System Turbo Timer
Manufacturer: Edge
ID: 98612
Category: Performance Parts, gt, performance Electronics, gt, electronic Multi Purpose Gauge
SKU: Edg98612
|
|
|
Fabtech Stealth Monotube Shock Absoorber - Fts6016.
Stealth Monotube Shocks Are Built With A 46mm Diameter High Flow Piston And Vehicle Specific Valving, For A Great Ride With Oversized Tires. Each Stealth Shock Absorber Has A Free Floating Piston That Separates The Nitrogen Gas Charge From The Oil To Reduce Shock Fadei N Off-road Conditions. Stealth Monotube Shock Absorber
Manufacturer: Fabtech
ID: Fts6016
Category: Suspension And Shocks, gt, shock Ab Sorbers
SKU: Fabfts6016
|
|
|
Jcroffroad Rotopax Mount For Adventure Tire Carrier (black) - Xjarp-pc.
The Rotopax Mount Is Design To Be Bolted Onto The Adventure Tire Carrier And Allows You To Carry Either (2) 1 Or 2 Gallon Rotopax Containers. Rotopax Cans And Rotopax Lox Mounts Are Sold Separately. Black Powder Coat;allows You To Carry Two Rotopax Containers (1 Or 2 Gallon);requires Rotopax Lox Mounts;made In The U.s.a;mfg Sku:xjarp-pc
Manufacturer: Jcroffroad
ID: Xjarp-pc
Category: Bumpers, Tire Carriers , amp, Winch Mounts, gt, spare Tire Carriers
SKU: Jcrxjarp-pc
|
|
|
King Shocks Oem Performance Series Front Coilovers - 25001-124.
Kings New Line Of Original Equipment Manufacturer, (oem), Shock Upgrade Kits Provide A Bolt On Suspension System That Elevates Your On And Off-road Performance To Unmatched Levels. Each Kit Has Been Subjected To Punishing Real World Testing To Develop The Optimal Damping Curves And Spring Rates For Your Vehicle. Built With The Same Quality Of Materials And Precise Tolerances Found On Our High End Race Shocks Our Oem Upgrade Kits Enable You To Experience The Famous King Ride Quality On Your Daily Driver Or Prerunner. Built With Race Winning Design Features Our Kits Come Complete And Provide Simple 100% Bolt On Installation With No Cutting Or Welding Done To Your Vehicle. Our Front Kits Provide An Adjustable Ride Height And A 25% Increase In Wheel Travel. Rear Kits Allow A 15% Travel Increase. Large 2.5 Inch Diameter Shock Bodies With External Reservoirs Dramatically Increase Fluid Capacity And Heat Dissipation To Provide Sustaineddamping Performance Even Under The Most Punishing Conditions. Our Oem Upgrade Shocks Feature The Same Serviceable Design That Allows For Valve Adjustments With Simple Hand Tools Just Like Our Race Shocks. Our Experienced Shock Technicians Are A Phone Call Away To Help Should Any Questions Arise During Installation Or Use. Our Kits Are Available Ready To Bolt Into Stock Vehicles Or With Custom Length Rod End For Vehicles Running Lifted Aftermarket Suspensions. Oem Performance Series Front Coilovers W/remote Reservoir;extended Length: 21.690 Inch;collapsed Length: 16.80 Inch;ravel Length: 4.89 Inch;finish Color: Blue;bolt-on Installation;sold As: Pair
Manufacturer: King Shocks
ID: 25001-124
Category: Suspension And Shocks, gt, shock Absorbers
SKU: Kst25001-124
|
|
|
Lightforce Enforcer Handheld Spotlight - Enfpackus.
Lightforce Produces A Wide Range Of Lights, Designed To Enhance Any Situation That Requires Superior Portable Lighting That Will Not Let You Down. Typical Uses Include Hunting, Fishing, Boating, Camping, Security, Military And Police, Surveillance And The Observation Of Nocturnal Animals. 170mm Round;12 Volt, 30 Watt;handle Houses A Spare Bulb;lightweight, Polymer Construction;rotating Housing Changes Pattern Flood To Spot Beam;brass Ferrule For Mounting Options
Manufacturer: Lightforce
ID: Enfpackus
Category: Outdoor Lifestyle And Camping, gt, flashlights , amp, Portable Lighting
SKU: L/fenfpackus
|
|
|
Omix-ada Hydraulic Clutch Slave Cylinder - 16909.07.
Direct Oe Replacement Jeep Parts And Accessories Built To The Original Specifications By Omix-ada. Limited Five Year Manufacturers Warranty. 6 Cylinder Or V8 Engines
Manufacturer: Omix-ada
ID: 16909.07
Category: Replacement Drivetrain Parts, gt, replacement Clutch Parts, gt, xj Cherokee Clutch Parts
SKU: Oai16909.07
|
|
|
Odyssey Batteries Battery Hold Down Kit (polished Aluminum) - Hk-pc1700.
Custom Made For A Range Of Specialty Odyssey Batteries, The Odyssey Battery Hold Down Kit Features A Polished Aluminum Finish That Says You're Serious About Performance. Ideal For Applications Requiring The Mounting Of An Additional Battery To Power Accessories. For Use With The 1700 Series Batteries;polished Aluminum Finish Enhances Under Hood Appearance;includes All Components Required For An Easy Install;designed And Precision-machined Exclusively For Odyssey Batteries
Manufacturer: Odyssey Batteries
ID: Hk-pc1700
Category: Electrical, gt, battery , amp, Battery Accessories, gt, battery Hold Down
SKU: Odyhk-pc1700
|
|
|
Piaa License Plate Light Kit - 19325.
The Piaa License Plate Lamp Kit Will Add A Little Extra With These Incandescent Lights. Everything Is Included In The Kid For Easy Installation. License Plate Light Kit;incl.2 Pn[19492];resistor
Manufacturer: Piaa Lighting
ID: 19325
Category: Lighting , amp, Lighting Accessories, gt, off-road Lighting
SKU: Pia19325
|
|
|
Poison Spyder Custom Bfh Jeep Front Bumper, Shackle Tabs, Bare Steel.
Poison Spyder Customs Bfh Front Bumper Is Designed For Those Harcdore Four-wheelers Who Value Strength, Simplicity And Function. This Bumper Was Literally Built For The Hammers With The Best Ground Clearance, Tire Clearance And Approach Angle Possible. It Is No Wider Than The Jeeps Frame Rails, With Angled Facets To Improve Its Ability To Slide Over The Rocks. The Bfh Bumper Is Cnc Laser-cut From A Single Piece Of High Strength 3/16 Plate Steel, Then Precision Brake-formed For An Exact Fit. The Bfh Bumper Features An Integrated Winch Mount And One-piece Design. Recovery Shackle Tabs Are Machined From 1 Thick Plate Steel To Provide A Secure Attachment Point For 3/4 Recovery Shackles. These Tabs Are Specifically Engineered To Match The Angles Of The Bfh Bumper To Result In Zero Loss In Approach Angle. Bare Steel;3/16 Inch Plate Steel;features An Integrated Winch Mount;d-ring Shackle Tabs Made Of 1 Inch Thick Plate Steel
Manufacturer: Poison Spyder Customs
ID: 11-16-020-d
Category: Bumpers, Tire Carriers , amp, Winch Mounts, gt, front Bumpers
SKU: Psc11-16-020-d
|
|
|
Rock Hard 4x4 Parts Narrow Width Legendary Front Bumper (black) - Rh-4001-c46.
Our 46 Wide Expedition Narrow Width Bumper Is Part Of Our Wide / Extreme Duty Armor Upgrade Line. It Looks As Good As It Performs And When You See One Installed On A Strangers Jeep You Want To Walk Over And Touch It. Clean Lines, Exact Fitment, And Included Features Make It The Undisputed Leader In Narrow Width Offerings. Not All Bumpers Can Tackle All Trails. Sometimes It Takes A Full Width, Tire Covering, Fender Protecting, 3/16 Thick Plate Steel Bumper To Survive Your Toughest Advetures. This Is That Bumper. Its The Big Kid On The Block With A Look That's All Its Own. Winch Ready And Installs In Minutes - Our Full Width Is A Healthy Does Of Bolt On Armor That Will Cure What Ails Ya. 3/16 Inch Steel Construction;angled Forward;recovery Tabs Included;multiple Light Mount Options;100% Bolt-on Installation;uses Oem Hardware;100% Made In U.s.a.;lifetime Warranty
Manufacturer: Rock Hard 4x4 Parts
ID: Rh-4001-c46
Category: Bumpers, Tire Carriers , amp, Winch Mounts, gt, front Bumpers
SKU: Rfprh-4001-c46
|
|
|
Rock Hard 4x4 Parts Shorty Front Bumper With Tube Extensions, Lowered Winch Without Fog Lights (black) - Rh-5004.
Rockhard Shorty Bumpers Are Made From 1/4 Inch Plate To Withstand Rockhard Abuse. Tapers Down And Back To Protect The Factory Front Cross Frame And Sway-bar Disconnect Unit ( If Equipped). This Provides The Best Possible Approach Angle Without Cutting Of The Factory Frame. Winch Is Mounted On Top Of The Bumper So There Is Room For The Factory Fog Lights Down Low. Lights Are Recessed To Protect Them From Damage. D-rings Are 5/8 Inch X 2-1/2 Inch With Hole For 7/8 Inch Pin. Powder Coated Black With Slight Texture. * 2012 To 2013 Jks Require A Vacuum Pump Relocation Kit #rfprh5011. 2 And 4-door Models;textured Black Powdercoat;made From 1/4 Inch Plate To Withstand Rockhard Abuse;taperss Down And Back To Protect The Factory Front Cross Frame And Sway-bar Disconnect Unit;uses Factory Bumper Hardware For Installation;made In The U.s.a
Manufacturer: Rock Hard 4x4 Parts
ID: Rh-5004
Category: Bumpers, Tire Carriers , amp, Winch Mounts, gt, front Bumpers
SKU: Rfprh-5004
|
|
|
Rock Krawler 2.5 Inch Stage-1 Overland System - Jk25os-2s1.
If Your Overlanding Jk Is Looking For A Lift, Look No Further. Rock Krawler Suspensions Overland Suspension Systems Are Specifically Designed For Users With Heavier Accessories, Camping Gear, Roof Racks, And Coolers. Overland Suspension Systems Include A Uniqque Rear Coil Designed For Increased Carrying Capacity For All Of Your Heavy Accessories And Camping Equipment But Still Maintain Excellent Driving Characteristics On And Off Road. All Rock Krawler Suspension Products Are American Made And Backed With Rock Krawlers Abuse Proof Lifetime Warranty. 2-door Models;durable Black Powdercoat Finish;solid Alloy Steel Control Arm Construction;includes 2.0 Smooth Body Rrd Racing Shocks And 2 Inch Bump Stops Front And Rear;best In Class Ground Clearance And Cross Over Angles;made In The U.s.a;abuse Proof Lifetime Warranty
Manufacturer: Rock Krawler
ID: Jk25os-2s1
Category: Suspension And Shocks, g T, suspension Lift Kits
SKU: Rksjk25os-2s1
|
|
|
Rampage Flat Style Fender Flare Set (black) - 57260630.
Designed For Larger Tires And Wheels, Flat Style Flares Will Transform Your Jeep Into Rugged An Off-road Appearing Machine. This Flat Style Fender Flare Provides Extra Coverage On Jeeps With Larger Move Forward And Tire Packages. This Distinctive Fender Flare, Includes An Inner Liner That Fully Encloses The Underside Of The Flares, Providing A Clean Look And Protecting Exposed Sheet Metal In The Wheel Well. 2 And 4-door Models;front And Rear Flares;smooth Finish;black Hardware;1 Inch Wider And 1 Inch More Clearance Than Stock Flares;low-profile Flat Flare;uv-resistant To Protect Against Chalking And Fading;no Drill Installation;limited Lifetime Warranty;made In The U.s.a
Manufacturer: Rampage
ID: 57260630
Category: Exterior Parts , amp, Car Care , Fender Flares, gt, fenders , amp, Flares, gt, jeep Fender Flares
SKU: Rpp57260630
|
|
|
Synergy Manucacturing Stage 1 Suspension System, 2 Inch Lift Kit - 8021-20.
The Stage 1 System Offers The Next Level Of Performance From The Starter System By Including A Front Adjustable Track Bar And Rear Track Bar Relocation Bracket In Addition To 2 Lift Springs. These Key Components Allow Centering Of The Front And Rear Axles And Provide A Raised Roll Center Height In The Rear, Resulting In Increased Handling And Performance. This System Will Fit 33 Tires With Stock Fenders Or 35 Tires With High Fenders. Includes Track Bar Relocation Brackets, Bump Stop Extensions, Rear Sway Bar Link, Brake Relocation Kits, Cam Bolt Kit, Optional Shock Relocation Brackets, Coil Springs. 2-door Models;key Features Are A Front Adjustable Track Bar And Rear Track Bar Relocation Bracket;front And Rear Bump Top Extension Kits;rear Sway Bar Links;front And Rear Brake Line Relocation Kits;control Arm Cam Bolt Kit To Correct Caster;abrasion-resistant Powder Coat End For Maximum Durability And Corrosion Resistance;100% Bolt-on Installation;made In The U.s.a
Manufacturer: Synergy Manufacturing
ID: 8021-20
Category: Suspension And Shocks, gt, suspension Lift Kits
SKU: Syn8021-20
|
|
|