16cm - 120/140 Grain. For Light Duty And Workshop.

Lightweight, Effective, Comfortable And Hygienic Respiratory Protection Against Dusts And Mists. It Also Provides Additional Relief From Low Levels Of Organic Vapours Or Acid Gases Such As Sulphur Dioxide And Hydrogen Fluoride.the Convex Shape, Twin Strap Design, Foam Nose Seal And Aluminium Nose Clip Ensures A Good Face Seal Over A Range Of Face Sizes.standard: En149:2001 Ffp2protection Level: 12xnpf For Particulates. Acid Gases, Including Hydrogen Fluoride Sulphur Dioxide, Chlorine, All Below Welprotection Level:nominal Protection Factor 12 X Npfassigned Protection Factor 10 X Apf

101equality Colour Coded General Purpose Masking Tape Is A Room Temperature Premium Quality Tape With A Host Of Uses Such As Holding, Bundling, Sealing Reliable Paint Masking, Bundling, Box Sealing, Labelling And Temporary Fixing To Name But A Few.

Use In Place Of Conventional Gaskets. Very Flexibile, Good Gap Fill And Oi Resistance. No Hazard Symbols, No Risk Phrases. White Material Safety Data Sheet - No Need For Coshh Assessment.strength: 1.4n/mmã‚â³ Flexible.sealant Type: Silicone.colour: Black. Temperature: -55 To +200ã‚â°c.comment: Excellent Oil Resistance, Direct Application, Gun Not Required, No Safety Labelling.

H3kills Bacteria And Mrsa. Removes Dirt And Grease With A Non-smear Finish. For Use On Washable Hard Surfaces. Conforms To En1276.size: 750ml.

Rubber Nitrile Soles. 200 Joules Steel Toe Cap Impact Protection. Guards Against Falling Objects And Collisions. Normally Allows Walking On Hot Surfaces Up To 200ã‚â°c.sb Classified.manufactured To En Iso 20345:2011.

General Purpose Gaps Up To 0,25mm. Temperature Up To 150ã‚â°c. Use On Rigid Metals Parts.strength: Rigid.colour: Orange. Temperature: -55 To +150ã‚â°c.comment: For Machined, Rigid Metal Flanges - General Purpose.

Edct Milling Inserts75ã‚â° Rhombic Insertgrade Kc725m(iso M15-m35, P15-p35, K15-k35) A Multi-layer Tialn- Pvd Coating With A Tough 11.5% Cobalt Substrate. General Purpose Medium-speed Grade For Steels. Good Resistance To Thermal Shock. Suitable For Wet And Dry Machining Applications. Speed Range: 300 - 650 Sfm On Steel Materials; 200 - 500 Sfm On Stainless Steel Materials.

Female Threaded Tailpieceseries 3050suitable For Vacuum And Pressure Application. The Full Range Includes Straight, L - T Shaped And Cross Piece Male Or Female Couplings, All Of Which Are Available In A Large Variety Of Thread Sizes.

Series 53014ã‚â° Vernier Face Angle Provides Easy Reading. Thumb Wheel And Locknut. Incorporates Quadri Feature.

Leather, Made With One Pocket, Two Loops And Nail Pouch. Belt Not Included.

Refillable Wiping System Self Impregnating Wiping Solution For Critical Task Applications. Strong And Absorbent Rayon/polyester, No Loose Fibres And Low Lint. Sheet Size: 30.5 X 31.5cm.sheet Colour: White.for Use With: Kim-952-7764k.

Resin Bond Aluminium Oxide Sanding Belts Are Designed For Industrial Applications. Suitable For Wood And Metal Work.75mm (3ã¢â‚¬ï¿¾) Wide X 610mm (24ã¢â‚¬ï¿¾) Long

Sia Abrasives - 7900 Sianet Sanding Discs.net-backed Abrasive Sanding Discs With Minimal Clogging, High Removal Rate And High Tear Resistance. No Dependence On Hole System. Ideal Sanding Down Coatings And Impurities, Sanding Out Unevenness At The Edges Of Repaired Surfaces And For Fine Sanding.grit Type: Blue-fired Aluminium Oxide /white Aluminium Oxide.grit Range: P80 - P400.backing: Knitted Fabric.coating: Electrostatic.bonding: Resin Over Resin. Applications:ã¢â‚¬â¢ Keying Paints, Lacquers, Bodyfillers, Primer Fillers And Plasticsã¢â‚¬â¢ Intermediate Lacquer Sandingã¢â‚¬â¢ Fine Sanding Surfaces And Edgesã¢â‚¬â¢ Preparation For Polishing On High-gloss Surfacesã¢â‚¬â¢ Sanding Off Coatings And Impuritiesã¢â‚¬â¢ Keying Primersã¢â‚¬â¢ Fine Sanding Solid Wood, Veneers, Solid Surface Materials, Priming Foil, Plaster And Plasterboardã¢â‚¬â¢ Intermediate Sanding Of Varnishes

Mm Ec-cf: Multi-master Interchangeable Solid Carbide Heads With 38ã‚â° Helix And Variable Pitch For Roughing And Finishing Operations. High Material Removal Rates Chatter Free. Used For Machining Alloyed And Stainless Steel And Exotic Materials.grade: Ic908a Hard, Fine Grain Substrate With Excellent Chipping Resistance, Combined With A New Tialn Pvd Coating. Provides High Wear And Oxidation Resistance. Recommended For A Very Wide Range Of Materials Applications And Machining Conditions.iso Range - P/m/k: (p15-p30)(m20-m30)(k20-k40)iso Range - H/s/n: (h10-h20)(s10-s25)grade Or Coating Type: Pvdcoating Layers: Tialn

Handy A4 Size Notebook For All Those Essential Notes. Stylish Stiff Green Manilla Cover For Easier Note Taking. Feint Ruled Both Sides, 96 Leaves. Secure Spiral Binding Ensures Pages Won't Fall Out.

Two Sizes Of Post-it Z-notes, Designed For Use With Post-it Z-note Dispensers. Plastic Dispenser Holds The Z-notes Pad Securely, With Spring Loaded Action To Ensure A Note Is Always Within Easy Reach.

Rockwell Hardness Testermodel 150rfor Testing The Hardness Of Hard Alloys, Quenched And Unquenched Steels, Using Steel Ball Or Diamond Penetrators To Measure Rockwell A, B & C Units Of Measurement. Suppplied With Test Block, Flat Large, Small And V Notch Anvils, Steel Ball Bearing Indentor And Diamond Indentor. Manufactured In Accordance With Iso 6508-2:1999 & Astme18.measuring Ranges: 20-88hra (test Force: 588.4n/60kgf), 20-100hrb (test Force: 980.7n/100kgf), 20-70hrc (test Force: 1471n/150kgf). Max Height Of Test Piece: 80mm With Screw Protective Jacket, 170mm Without. Depth Of Throat: 135mm. Dimensions: 466 X 238 X 630mm.

Blx10superior Ball End Strength And 25ã‚â° Working Angle. Works In Hard To Reach Places.sizes: 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32 & 1/4ã¢â‚¬â³ Af.

Strong Two Component Plastic Handle.396hp - For Hard Or Dry Wood, Fast Cut396jt - For Soft, Green Wood, Fast And Clean Cut

Slimline Design Sits Comfortably In The Hand Or Pocket. Prevents Flat Chalk Sticks Breaking When Marking Out Weld Areas Or Cuts. Fitted With 'pen Type' Pocket Clip.

T290 Lnht Milling Insertssumomill Tangential Insert With 2 Cutting Edges.insert Grade: Ic830iso Range - P/m/k: (p20-p40)(m25-m35)iso Range - H/s/n: (s15-s30)grade Or Coating Type: Pvdcoating Layers: Altin+tina 'sumo Tec' Altin+tin Pvd Coated Grade. Recommended For Interrupted Cut And Heavy Operations On Stainless Steel, High Temperature And Alloyed Steel. High Toughness And Wear Resistance.

Vngg Turning Inserts35ã‚â° Rhombic Insert Insert Grade Ns530iso Range - (p05-p25)(m10-m35)coating Layers: Uncoated Cermetuncoated Cermet Grade For Use On Steel And Stainless

Workshop Grade B.precision Round Blade And Stock.blind Rivetted Construction.hardened And Tempered Blades.blade Length: 100 Mm.approx. Stock Length: 56 Mm.

Grey Designed To Fill Unused Modules In Sentry Consumer Units And Small Enclosures. Din-rail Mounted.for Use With 7440s.