Pilot Light Heads Ãëœ22 Plain Lens For Integral Led

Inner Magnifying Lenses, Fresh Air Unit, Head Band Kits, Sweat Bands, Ear Defenders And Spare Parts Are Also Available On Request.

195gsm Polyester/cotton Trouser With Sewn-in Front Seam For Permanent Smartness. No Pleats, Waistband With Concealed Twin Hook And Bar Fastening. Side And Rear Elicitation. Two Swing Pockets, Pleated Cargo Pockets With Velcro Sealed Flap. Mobile Phone Pocket.colours: Black, Navy.

Long Series - 2 Flute - Metricfor Optimum Performance And Maximum Swarf Removal When Plunging, Slotting And Routing In Light Alloys, Brass, Aluminium, Non Ferrous And Other Soft Materials. Manufactured To Uscti Standards.metric Tolerancesdiameter: Over 1.00 ~ Up To 6.00. Tolerance: +0.000, -0.050.diameter: Over 6.00 ~ Up To 25.00. Tolerance: +0.000, -0.080.

Guaranteed For 10 Years. Hardened Steel Shackle, Brass Body. Five Pin Tumbler Locking Mechanism. For Use On Roller Shutters, Warehouses, Industrial Units, Commercial Premises And Retail Outlets. *keyed Alike.

Vials Accuracy Of 0.5mm/m For Improved Accuracy. Magnified Centre Vial For More User Comfort. Solid Vials For Better Control And Less Slips. Maxedge Centre Vial : Bridged Centre Vial For Continuous Marking Surface. Top Read Scale For Fast Measurements. Pencil Included, Quick Help For Marking. Shock Absorbing End Caps Makes It Long Lasting And Shock-resistant. Aluminum Body Removes Excess Dirt And Prolongs Life.

Asymmetrical Handles With Offset Hardened And Ground Steel Blades. Suitable For Precise Snipping Or Running Along The Edge Of A Cutting Board.

With A Traditional 'fluted' Design Handle. High Quality Steel Blades With Satin Finish. Magnetic Tips, Hardened And Ground To Prolong Tool Life. This Range Offers The Widest Choice Of Blade Selection And Blade Length. The High Impact Plastic Handles Are Acid And Oil Resistant. A Comprehensive Selection To Meet The Demands Of Modern Industry.flared Tip, Square Bladesquare Bladed Screwdrivers Can Be Gripped In A Spanner Or Locking Wrench To Allow Greater Torque To Be Applied From The Side Rather Than From Directly Above The Screwdriver.

A Range Of Professional Polishing Foams For Use With All Makes Of Power Tools. Offers A Completesurface Finishing Solution. All Pads Are 150mm Diameter X 50mm Deep.blue Regular Compounding Foamsofter, All Purpose Foam For Polishing And Compounding Of Cellulose And Acrylic. With A Medium Density Grade.

Black Rubber Toughened Instant Adhesive. Low/medium Viscosity. Ideal Where Bonded Parts Are Subject To Impact And Peel. Suitable For Bonding Metal To Metal To Plastic Or Rubber. Resists Shock Loading.gap Fill: 0.25mm.colour: Black. Temperature: -40 To +120ã‚â°c.comment: Toughened, Black, Slower Cure.

Manufactured From High Quality Chrome Vanadium, Fully Polished Finish. Ideal For Nut Spinning.

General-purpose Open Knit Mixed Fibre Floor Cloth. Supplied In Packs Of 10.size: 480mm X 460mm.

Hbr-qf Milling Insertsballplus, 2 Cutting Edges (fully Effective), 220ã‚â° Spherical Cutting Profile Inserts. Used For Profiling, Up And Down Ramping, Steep Profiles And Undercutting. Accuracy Is Within 0.01mm. May Be Used For Roughing Or Finishing Applications.insert Grade: Ic908iso Range - P/m/k: (p15-p30)(m20-m30)(k20-k40)iso Range - H/s/n: (h10-h20)(s10-s25)grade Or Coating Type: Pvdcoating Layers: Tialna Hard, Fine Grain Substrate With Excellent Chipping Resistance, Combined With A New Tialn Pvd Coating. Provides High Wear And Oxidation Resistance. Recommended For A Very Wide Range Of Materials Applications And Machining Conditions.

Series 94 - Weldon Shank - 5 Piece Setcentre Cutting. To Manufacturers Standards. Weldon Shank To Din 1835b. Shank Diameter To H6. Dimensions To Din 844. Contents: 6, 8, 10, 12 And 16mm.the Latest Enhancement Of The Swisstech Range, These Cutters Deliver Excellent Performance When Cutting Difficult Materials, Even At High Speeds.manufactured From Premium Pm (powder Metallurgy) Tool Steel, With An Excellent Cutting Geometry. Designed Ofr Strength And Rigidity, Minimising Vibration In High Speed Cutting Applications And Providing Improved Productivity.these Cutters Are Further Enhanced By The Swisstech Peak Power? Coating, Suiting Dry Cutting Applications, Having Higher Oxidization Resistance And Hot-hardness Than Conventional Tialn Or Ticn Coatings, Withstanding The High Thermal Loads Associated With High Speed Cutting Applications.

Heavy Duty Tongs Designed And Built For Strength And Durability. Can Be Quickly Adjusted To Carry From Six To Ten Bricks. Manufactured From Heavy-duty Steel.90ã‚â° Handle Opening.capacity: 406 - 875mm (8 To 10 Bricks).

Centre Fold Sheeting - Type As Suitable For Irregular And Awkward Shaped Products, Such As Trolleys, Trucks, Machinery And Furniture. Supplied Centre Folded On The Roll.roll Weight: 25kg.all Prices Are Per Rollimages Are For Illustration Purposes Only

Water-based, Foaming Cleaner For Degreasing And Cleaning Of Stainless Steel Surfaces. Registered Nsf C1 (no.138212) For Use In The Food Industry. Eliminates Fingerprints, Watermarks, Dust And Dirt From Stainless Steel. Provides Metal Surfaces With A Long Term Protective Coating Which Inhibits Staining And Contamination. Fitted With A 360ã‚â° Spray System For All Angle Use, Even Upside Down. Suitable For Cleaning And Protection Of Metal Surfaces Against Staining And Contamination. Size: 500ml.

Specially Formulated With Stainless Steel To Form A Super Strong Bond. Sets In Minutes. Suitable For Use On Most Metals Including Copper, Steel, Aluminium And Iron. Can Be Drilled, Filed And Painted.size: 2x 15ml Tubes.

Heavy Duty Metal Dispenser For 1x 75mm X 66m Roll Or 3x 25mm X 66m Length Rolls On A 75mm Core. Comes With Blade Protection Attachment.

Evo-bond Will Bond Most Building Materials Provided That One Has A Degree Of Porosity. Suitable For A Variety Of Applications Including Bonding, Priming And As Admixtures. Evo-bond May Also Be Used As A Dust Sealer. Excellent Primer, Bonds To Most Building Surfaces And Improves Adhesion.size: 5ltr.

Ad20-60disc 20mm Diameter 60 Grit Quick Change Discaluminium Oxide

Chisel Point Crowbarhead Size: 35mm At Flat End.shocksafe Poly-fibre Safety Products Are Manufactured In The Uk By Richard Carter Ltd Who Have Designed A Range Of Top Quality Contractors Tools For Ground Works Construction In The Power Utilities Industry. Exceptionally Strong, Hard Wearing And Safe In The Most Testing Of Situations. We Have Developed Our Standard Range Of Fibre Glass Tools Into A Fully Certified, Double Insulated Range. Shocksafe Products Also Feature Newly Developed Poly-fibre Handles In Preference To Part Metal Handles That Are Supplied With Other Brands Of Insulated Tools. This Ensures That The Operator Has The Maximum Possible Protection Against Shock. A Specially Contoured Collar Prevents The Users Hand Slipping Onto The Steel Blades. All Tools Are Individually Flash Tested To 10,000 Voltz And Certified To 1,000v. Conforms To Bs 8020 Standards.

Brush Set For:110v Gst 2000 Jigsaw (bch266-7394m)110v Ggs 7c Grinder (bch266-7342r)240v Ggs 7c Grinder (bch266-7342t)110v Ggs 27l Grinder (bch266-7343c)

A Light And Elastic Low-lint Glove Designed For Easy Movement And Continuous Wear. Offers Protection Against Oils, Hydrocarbons, Grease And Abrasion With High Levels Of Grip And Excellent Touch Sensitivity. Perspiration Is Reduced Thanks To The Gloves Breathable Back. Features An Extended Elasticated Cuff.en388: 3.1.3.1cat Ii

Easy To Fit And Comfortable To Wear For Effective Hearing Protection. Ideal For The Food Manufacturing Industry Where Blue Is Classified As A Non-food Colour. Snr Rating 37db. Conformance To En352-2: 2002.