Inch Sizesall Shims Are Marked With Material Type, Size, Thickness And A Tracking Lot Number. Full Hard, Cold Rolled, Low Carbon 1008-1010. Hardness: .070ã¢â‚¬ï¿¾ Thick Rockwell B84 Min. Conforms To: Aisi-1008/aisi-1010.

Using A Pipe Cutter Rather Than A Hacksaw While Installing New Pipe Work Avoids Swarf Entering The System, Which May Cause Problems Or Damage When System Is Used.copper Pipe Cuttersrigid Construction Suitable For Use In Confined Spaces. Large Feed Screw With Fluted Handle For Accurate Adjustment Of Cutter Depth. The Cutter Is Manufactured From Hardened And Tempered Steel. Type 265b And 266e Are Supplied With Spare Cutter In The Fluted Handle.cutter Wheels For Stainless Steel Are Available Separately (mon-588-0284j)

Due To The Special Geometry At The Centre Of The Ball, With Unique Carbide Substrate And Coating. The Epoch Finish Ball Will Give Unbeatable Toolife And Surface Finish When High Speed Finishing. This End Mill Will Significantly Reduce Polishing Operations In Die And Mould Manufacture, Even On Plain Surfaces. All Cutters Are Undernecked Behind Flute To Give Additional Reach.

60% Cotton/40% Nylon, 240 G/mã‚â³ Bearnylon(r) Water-repellent Jacket. Pile Lining In Body, Quilt Lining In Sleeves. Zip Right Through, Chest Pockets With Zip And D-ring. Front Pockets, Inner Pocket - One With Zip And One With Hook And Loop Band. Zipped Sleeve Pocket, Pen Pockets And Rib At Waist And At Cuffs.

Super Positive 45ã‚â° Approach Milling Cutter, Angle Decreases Cutting Forces And Allows A Quick Feed In A Limited Capacity Machine. Clamp Style Insert Pocket With Shim Seats To Protect The Body In Case Of Accident. Plasma Ion Coating Offers Longer Tool Life And Greater Hardness That Is More Resistant To Wear. Through Coolant As Standard.

The W22 Is A Range Of Three-phase Induction Motors Which Reduces Energy Consumption, Noise, Vibration And Cost Of Ownership.with An Aerodynamic Frame, Redesigned Cooling System, Unique Wise Insulation System And New Wseal 'v' Ring With Double Lip And Metallic Cap, The W22 Range Of Motors Is Quieter, More Reliable, Easier To Maintain And More Cost Effective.cast Iron Ie3 Multi-voltage Three Phase Motorscast Iron Frame Motors - Ie3 (premium Efficiency) Three-phase Motors. These Motors Exceed The Ie3 New European Minimum Energy Performance Standard (eu Meps). Thermisters Fitted As Standard In Frame 160 And Above. Ip55 Protection As Standard (up To Ip66 On Request). Cast Iron 4 Pole 1500rpm Foot Mounted B3 Ie3 Motors

Additional Side Plates For Circular Brusheswire Wheelsindustrial Rotary Wire Wheels & Brushes Are Available As A Comprehensive Range Including Circular Brushes, Shaft Mounted Arbor Style And De-carbonising Brushes For Use With Power Tools, Machine Tools And Flexible Drives.

With 3/4ã¢â‚¬ï¿¾ Bsp Male Threads. Both Models Can Be Locked Into The Off Position By Use Of A Padlock Or Locking Pin. Polypropylene Not Suitable For Petroleum-based Products.

Rectangularsuitable For Use With Petrol, Oil, Water Etc.

For Use On Fine And Detailed Decorating Work And Difficult To Get To Areas Where The Finish Makes All The Difference. Overall Length: 300mm

Xl21safety Goggles With Clear Single-piece Polycarbonate Lens And Anti-mist Coating. Mounted In A Pvc Housing With Easy Flow Indirect Ventilation And Adjustable Elasticated Strap.

Revolutionary Inkjoy Writing System. The Inkjoy 5000 Rt Combines A Pearlised Hourglass Shape With A Rubberised Grip To Provide Comfort And Control.

This Full-size 216mm Mitre Saw Is Powered By A Single Xr Flexvolt Battery (not Included). A Built-in Xps Led Provides Long Term Accuracy And Clear Cut Line, Even In Bright Sunlight.features And Benefits:the Classic Saw Design Improved And Updated For The Modern Cordless User.xps Shadow Line Cut Indicator Provides Fast Accurate Alignment Of The Blade While Illuminating The Workpiece For Increased Productivity, No Adjustment Required.improved Dust Extraction Efficiency.the Base And Fence Have Been Machined To Meet The Accuracy Of The Most Demanding Applications.head Lock Functions Allow The Head To Be Fixed Restricting The Traverse Function For Trim Applications And Ease Of Transportation.integrated Positive Mitre Stops At 15 - 22.5 - 30 - 45 Degrees, Quick Release Mitre Mechanism Up To 50 Degrees.sliding Left Hand Fence With Measuring Scale For Improved Material Support And Management.compact Internal Rail Design For Huge Cutting Capacity In A Highly Transportable Format.technical Specification:voltage - 54.blade Speed - 6300rpm.blade Diameter - 216mm.blade Bore - 30mm.bevel Capacity - 48ã‚â°.mitre Capacity Left And Right - 50 / 50ã‚â°.cutting Capacity At 90 Deg / 45 Deg W X H - 173mm X 62mm.cutting Capacity At 90 Deg / 90 Deg W X H - 270mm X 62mm.cutting Capacity At 45 Deg / 90 Deg W X H - 189mm X 62mm.max. Cutting Capacity At 45 Deg/ 45 Deg - 190 X 48mm.max. Depth Of Cut (saws) - 80mm.weight - 14kg.depth - 550mm.length - 490mm.supplied With:tct Tooth Saw Blade.blade Spanner.material Clamp.body Only/naked Machine, Supplied Without Battery Or Charger.

Low Surface Tension Penetrant With Foaming Action For Un-rivalled Penetrative And Lubrication Properties, Ideal For Very Close Tolerance Mechanical Assemblies. Safe For Use On Metals, Most Rubbers And Plastics, Conforms To Nsf H2.

Tin Plated Oil Measure With Ergonomic Handle And Polythylene Safety Spout.technical Datacapacity: 0.5 Litrecontainer Material: Tin Plate With Ldpe (polyethylene Of Low Density) Discharge Spout.dimensions (hxw): 230 X 70mmweight: 180gm

The Ast4494 Is An Updated Kit Covering A Huge Range Of Cars, Vans, Trucks And Motorcycles. Contains: Quality Gauge With 1m Long Hose, Quick Coupler System, 90ã‚â° Elbow And Range Of 9 Adaptors.

Phosphated Hardened And Anti-corrosion Treated. Comfortable Handle. Graduated Jaw. As Per Din 3117, Bs 6333, Iso 6787, Ggg-w6316 Type 1, Class 2 And Asme B107, 8m-1991.'ergo' Typemanufactured From Drop Forged Chrome Vanadium Steel. Ground And Polished Parallel Gripping Jaws With Etched Measurement Scale. The Adjustable Jaw Does Not Fall Out At The Maximum Opening Capacity.

Made From Heavyweight Coloured Manilla. Over 50 Percent Recycled. Pre-scored For Use With Two-piece Filing Clips. Supplied Complete With Clear Plastic Tabs And White Card Tab Inserts. V-base 15mm Capacity. Foolscap. Available In Blue, Red, Yellow An D Green.

A4 Multi Punched Pockets. Glass Clear, Top Opening Pockets With White Reinforcing Strips. Ideal For Protecting Frequently Used Papers In Everyday Use.

Compact, Lightweight Design For Easy Maneuverability. Lock Off Throttle To Prevent Accidental Start Up. Built In Speed Regulator To Match Speed To The Job. Free Speed: 28000 Rpm Avg.air Consumption: 4cfmair Inlet Nptf: 1/4??min. Hose Size: 3/8?? - 10mm

Economical Computer Accessory. Helps Relieve The Stress Of Prolonged Keyboard And Mouse Use. Smooth Cloth Surface Provides Excellent Tracking And Control. Non-skid Base Potects Your Desk And Secures The Pad In Place. Available In Blue, Grey Or Red.

Poly/cotton Fabric. Durable Water Repellent Finish. Thermo-guard Insulation. Outer-fabric Weight 180g/m2. Pen Pocket. 2 Lower Cargo Pockets. 2 Lower Handwarmer Pockets. Mobile Phone Pocket. Inside Pocket. Concealed Zip Entrance In Lining.

White Dyneema/lycra Knitted Glovegrey Polyurethane Coating On Palm And Tips Of Fingerselastic Wristbenefits:the Knitting Technique Helps To Obtain A Glove That Conforms Snugly To The Hand, With Good Dexterity.the Glove Offers Maximum Comfort And Added Sturdiness.the Cool Dyneema Touch Gives An Added Sensation Of Comfort.the Tight Knit (gauge 13) Gives The Glove Perfect Support, Limits The Penetration Of Dirt And Offers A Good Touch.the Glove's Ventilated Back Optimises Its Breathability.resistance Features:the Dyneema/lycra Thread Provides Outstanding Properties Against Cuts.the Polyurethane Coating At The Palm And Fingertips Provides Outstanding Abrasion Resistance.caution! Do Not Expose This Glove To The Heat.hygiene Features:its White Colour Enhances The Glove's Hygiene And Cleanliness.its Grey Coating Enables Work In A Slightly Soiled Environment.

Q-connect Hp 126a Remanufactured Black, Cyan, Magenta And Yellow Laserjet Toner Cartridge

Model Djv180 Is A Cordless Jig Saw Powered By Li-ion Battery, Featuring A Compact And Lightweight Design.