Lightweight Dyneema Glove Provides Excellent Resistance To Cut, Abrasion And Tear. Nitrile Coating Offers High Abrasion Resistance. Seamless Construction Provides Exceptional Level Of Comfort, Whilst The Open Back Style Allows Excellent Breathability. Designed To Be Tight Fitting To Give Maximum Dexterity For The Most Tactile Of Operations. Wrist Elasticated For Snug Fit.colour: Blue Nitrile On A White Liner.

Equal Elbowsconnects Pipe At 90ã‚â°.push-fit Solution For Plumbing & Heating Systemsfor Use With Mains Fed And Indirect Cold Water Systems, Vented And Unvented Hot Water Systems, Vented And Sealed Central Heating Systems. Pipes Speedfit Fittings Can Be Used With Copper Pipe To Bs En 1057 And Speedfit Cross-linked Polyethylene (pex) Barrier Pipe To Bs7291.not To Be Used With Gas, Fuel Oil Or Compressed Air Applications. Speedfit Fittings Cannot Be Used On Stainless Steel Pipe. Standards Speedfit Products Are Designed And Manufactured Under A Fully Integrated System Assessed By B.s.i. To Bs En Iso9001. They Are Approved By The Water Regulations Advisory Scheme And Bba. Speedfit 'pem' And 'pkm' Fittings And Speedfit Barrier Pipe Are Kitemarked To Bs7291 Part 1 And 3, Class S. (licence No. Km39767).pipe In Ceilings And Roof Voids Should Be Clipped Every Metre And Should Not Be Fitted Any Closer Than 60mm From The End Of The Fitting. Pipe Should Be Adequately Supported By Pipe Clips To Prevent Undue Stress (side Load) On Fittings.can Only Be Used With Water Or Oil Based Paint, Not Cellulose Based Paints, Paint Thinners Or Strippers, Solder Flux Or Acid-based Descalents Or Aggressive Household Cleaning Products. Speedfit Products, When Used Indoors, Are Not Affected By Sunlight. When Used Outdoors Protect From Ultra Violet Light By Lagging Or Painting.it Is Recommended That All Installations Are Checked Prior To Use To Determine That A Seal Has Been Made.

Female Stud Connectorsqr1-rai Seriesstainless Steel Tube Locking Mechanism And Polymer Body And Release Ring.

The Blade Is Manufactured From Hardened And Ground Steel, Chemically Blued To Prevent Corrosion. With Impact Resistant Plastic Handle. Locking Nut. The Blade Can Be Locked At Any Angle, For Marking Joints, Across Boards And For Checking Edges.

Pins To Suit Ken5811300k Range Includes:2.5mm & 4mm6mm & 8mm3mm & 5mm7mm & 9mmpins Are Supplied In Pairs. Wrench Supplied Seperately.

Two Reflective Bands Around The Torso And Each Sleeve, One Band Over Each Shoulder Meeting En471 Class 3/2 Requirements. Fleece Comes With Mesh Inner Lining, Elasticated Cuffs And Two Side Entry Pockets.

Sprung Straight Jaw Circlip Pliers - Internalmanufactured From Specially Selected Steels. The Dual Material Grip Handle Design Allows The User To Apply The Greatest Force With The Minimum Amount Of Effort. These Are Manufactured With A Polypropylene Core For Strength And Durability With A Soft Thermoplastic Outer For Non-slip Comfort Grip. Double Polished Head And Joint. Induction Hardened Cutting Edges. Especially Suitable For Production Line Environments Where Repetitive Work Is Undertaken.

Translucent, Rigid And Leak-proof Hdpe Bottles With Pp Screw Caps. Lightweight But Very Durable In Use. Ideal For A Wide Range Of Liquid Storage And Sampling Applications. Excellent General Chemical Resistance. Moulded Spi Recycling Codes And Volume Information On Bottle Base. Singles Supplied Capped In Shrink-wrapped Packs.

Compact And Easy To Use, This 4-speed Variable Machine Is Powerful Enough To Drill Holes Up To 120mm Diameter. Has A Clamping Force Of 32,000n / 3,263kg And Is Supplied With Safety Guard, Coolant Tank, Safety Chain And Portable Case.dmm4vs - 110vdmm4vsi - 230v Cutter Capacity: Up To Ãëœ120mm X 50mm.twist Drill Capacity: Ãëœ32mm X 140mm.taps Capacity: Up To Ãëœ32mm X 40mm (with Adaptor).arbor: 19mm Weldon Shankdimensions: 570 X 250 X 330mm.weight: 30kg.

Designation: Mt No.0. Angle Of Taper: 2.98ã‚â°. Tolerance Js10: ÂⱠ0.029.designation: Mt No.1. Angle Of Taper: 2.86ã‚â°. Tolerance Js10: ÂⱠ0.029.designation: Mt No.2. Angle Of Taper: 2.86ã‚â°. Tolerance Js10: ÂⱠ0.035.designation: Mt No.3. Angle Of Taper: 2.88ã‚â°. Tolerance Js10: ÂⱠ0.042.designation: Mt No.4. Angle Of Taper: 2.98ã‚â°. Tolerance Js10: ÂⱠ0.042.

Series 513large Dial Face For Easy Reading With The Installed 2mm (.08") Diameter Point Carbide Tipped. These Indicators Are Ruggedly Housed Within A Satin Chrome Finished Case. Bezel And Dial Are Adjustable For Easy Zero Setting With Fully Jewelled Movements. Automatic Reversible Contat Point Is Adjustable Through 240ã‚â°. The Precision Miniature Pivot Bearings Give A Frictionless Movement Of The Contact Point. One Piece Bezel Of Crystal Design Ensures Resistance To Water And Dust.clock Only

Seamless Knitted Cut Protective Liner With Pu Palm Coating. Close Fitting For Maximum Dexterity.conforms To En388 4543.cat Ii

A-85634 (b11)symmetrical Head-geometry With Centring-tip For Optimised Results In The Event Of Reinforcement. Applications: Woodworking, Jigsaws, Joinery, Cabinet Making. Fine Teeth Setting For Clean Cut In Wood Or Plastics. Tooth Type/set: Ground And Taper Ground Teeth. Tooth Spacing: 2.8mm.

The Right Protection In Lower Noise Level Environments Makes It Easier To Communicate, Hear Signals And Keep In Touch With Your Surroundings. Mellows Are The Moldex Solution To Lower Db Protection. They Have The Same Shape And Feel As The Standard Moldex Plugs And Are Comfortable And Easy To Insert. The Noise Reduction Is Especially Low In The Medium And Lower Frequencies Where Speech Frequency Is Typically Found And In The High Frequencies The Noise Protection Is Enhanced Providing Protection Whilst Aiding Communication.for Use With Dispenser Mdx9587625a & Mdx9587650c

Open Type Without Seals To Allow For The Free Circulation Of Either Oil Or Grease, Used In Gearboxes And Other Assemblies Where A Lubricant Is Already Present. C3 Bearings Have An Internal Clearance To Cope With High Speed Environments Where Excess Heat Is Generated.

Rocol Moisture Guard Spray Is A Thin, Almost Dry Corrosion Preventative Film. It Is Suitable For The Temporary Indoor Protection Of Components Such As Bearings, Gears, Pressings And Any Machined Metal Product Which Requires Protection From Corrosive Attack - Whether In Storage, Transit Or Between Operations. Moisture Guard Spray Clear Is Ideal As A Colourless, Medium/long Term Indoor Corrosion Protection Of Bare Metal Components And Mould Tools Particularly Where Condensation Is A Problem.directions For Use: Shake Well, Hold Upright And Spray From A Distance Of Approximately 15 - 30 Cm. One Pass Usually Provides Sufficient Protection. Ensure Adequate Ventilation. Do Not Spray Onto Naked Flame Or Any Incandescent Material. Test Compatibility With Painted Or Coated Surfaces, Plastics And Rubbers If The Product Is Liable To Come Into Contact With These Materials. Protects Against Condensation Attack Does Not Attract Dirt Or Dust Silicone Free Flexible Film - Does Not Chip Or Crack Available In Clear Formulations

Designed For Those Applications Requiring Oil Repellency And Oil Grip, Whilst Providing High Levels Of Comfort And Fit. Can Be Laundered At 50ã‚â°c.

70-225 - Cut Resistantmade From Heavyweight 100% Kevlar. Neptune Kevlar Knitted Gloves Are Designed To Provide Superior Mechanical Strength In Light To Heavy-duty Handling And Production Applications. Goldknit Max Features Patented Reinforced Thumb Crotch That Provides Greater Protection And Durability. Designed To Offer A High Level Of Resistance To Sharp Edged Materials, Goldknit Also Provides Contact Heat Protection Up To 100ã‚â°c. Features & Benefits:100% Kevlar Construction.protects Hands From Sharp Metal, Glass, Ceramics Etc.heavy-duty Cut Resistance.reinforced Thumb Crotch.contact Heat Resistance Up To 100ã‚â°c.applications:automotive Assembly.white Goods Assembly.metal Stamping.

The New Labelmanager 210d Is The Label Maker That Belongs On Every Desk. Versatile, Yet Easy To Use, The Labelmanager 210d Has All The Features A Professional Label Maker Should Have.a Completely New User Interface Makes This Label Maker Extremely Easy To Use. Easy Navigation From Start To Print With Quick Access Buttons To Symbols, 6 Font Sizes, 7 Styles And 8 Different Boxes To Customise Your Label.mains Adapter: See Dym-821-0110k.

En Compliance: En 388, 4244 En 407, 41324x.heat-resistant Glove, Fully Lined, 0,9-1,1 Mm, Split Grain Cowhide, Cotton, Kevlar Fiber, Cat. Iii, Black, Yellow, Reinforced Index Finger, Reinforced Fingers And Thumb, Elasticated 180ã‚â°, For Allround Work.type Heat Protection Glovescategory Cat. Iiisizes 6, 7, 8, 9, 10, 11, 12, 13, 14, 15palmside Material Split Grain Cowhidepalmside Thickness 0,9-1,1 Mmupperhand Material Cottonlining Fully Linedlining Material Kevlar Fiberlength Range 265-305 Mmcolour Black, Yellowpairs Per Bundle/carton 6/60

2-part Structural Adhesive. Suitable For Composite/plastic Bonding.loctite Aa V1315 Is A 2-part, Off-white, Thixotropic Structural Adhesive. Suitable For Composite/plastic Bonding, It Has A Fixture Time Of 15 Min, A Shear Strength Of 15 N/mmã‚â³ And A Service Temperature Range Up To +120ã‚â°c.your Benefits:formerly Known As Bondmaster V1315.thixotropic.2-part Dual Cartridge Dispensers.applications:structural Bonding.

For General Steels, Stainless, Tool Steel, Cast Iron, Aluminium Alloys As Well As A Wide Range Of Other Materials. High Performance For High Metal Removal, This Unique Cutter Greatly Reduces The Cutting Force Requirement And Has A Rigid Body Design For Strength. Less Heat Is Generated During Cutting, Improving Tool Life And The Cutter Design Ensures Excellent Chip Ejection. Larger Diameters (250mm And 315mm) Are Available.

Longer Life, Faster Drilling And Greater Durability Superior Carbide Grade Optimised Flute Design Allows Efficient Debris Removal Hardened Body For Extra Strength And Reduced Breakage New Tip Design Ensures Better Bit Penetrationthe Dewalt Innovative Extreme 2 Sds-plus Drill Bit Is Amongst The Best In Terms Of Its Speed, Life And Endurance. The Drill Bits Contain The Following Features:- Superior Carbide Grade For Long Life And Greater Durability.- Optimised Flute Design Allows Efficient Debris Removal.- Hardened Body For Extra Strength And Reduced Breakage.- New Tip Design Ensures Better Bit Penetration, Longer Life, Faster Drilling And Greater Durability.the Dewalt Dewdt9542qz Extreme 2 Sds-plus Drillbit Has The Following Dimensions:size: 10.0mm X 260mm.dewalt Has Earned A Reputation For Designing, Engineering And Building Tough Industrial Machinery. In 1923 Raymond Dewalt Invented The Radial Arm Saw That For Decades Continued To Set The Standard For Quality And Durability. It Was The Start Of Our Long Lasting Reputation Among Professional Craftsmen: Tough, Powerful, Precise, Rugged And Reliable. These Became The Trademarks Of The Dewalt Name. Today These Characteristics Are Incorporated Through Long Experience And State-of-the-art Engineering Into Every Product Of Dewalt's Broad Range Of High Performance, Portable, Electric Power Tools And Accessories.dewalt's Broad Range Of High Performance, Portable, Electric Power Tools And Accessories. The Acceptance Of These Dewalt Products By Professional Tradesmen Around The World Has Made Dewalt The Number One Selling Brand Of Professional Power Tools.

These Workholding Clamps Are Designed For Use On Thin Or Low-profile Workpieces Replacing Ordinary Strap Clamps. They Feature A Self-aligning Swiveling Pivot. Eliminates The Need For Step Blocks Or Riser Blocks.capacity: 2900 Lb.clamping Ranges From: 0" - 3"maxmum Holding Capacity (n) 13,000working Height (mm): 45.0working Height (in): 1.750screw Diameter (mm): 13.0screw Diameter (in): 0.500

Model Df001d Is A Cost-effective And Lightweight In-line Cordless Screwdriver Powered By 3.6v/1.5ah Built-in Li-ion Battery.ã¢â‚¬â¢ Voltage: 3.6 Vã¢â‚¬â¢ Battery Type: In-built Li-ionã¢â‚¬â¢ Charge Time: 3-5 Hrsã¢â‚¬â¢ No Load Speed: 220 Rpmã¢â‚¬â¢ Driving Shank: 1/4" Hex â€⢠Max Fastening Torque: 4 Nmã¢â‚¬â¢ Capacity: Wood Screw Ãëœ3.8mm X 32mm Mmã¢â‚¬â¢ Overall Length: 287 Mmã¢â‚¬â¢ Net Weight: 0.36 Kgã¢â‚¬â¢ Vibration No Load: 2.5 M/secã‚â³ã¢â‚¬â¢ Vibration K Factor: 1.5 M/secã‚â³ã¢â‚¬â¢ Noise Sound Pressure: 70 Db(a)ã¢â‚¬â¢ Noise K Factor: 3 Db(a)