Kennedy-pro 19mm Go Through Socket
    Kennedy-pro 19mm Go Through Socket.

    Replacement Go-thru Sockets To Suit Ratchet Combination Spanner Set (ken-582-3980k).



    Manufacturer: Kennedy-pro
    ID: Tsk0019m
    Category: Hand Tools , gt, Sockets , hand, , gt, Quatro Go Thru
    SKU: Ken5823749k




Swisstech 3.00mm Q-coat Carbide Drill 3xd
    Swisstech 3.00mm Q-coat Carbide Drill 3xd.

    For Drilling Into General Steel, Cast Steel, Cast Iron, Chilled Cast Iron, Malleable Cast Iron, Non-ferrous Heavy And Light Metal, And Abrasive Plastic, Self-centering. Point Angle: 140ã‚â°, Tolerance Of Diameter: M7, Tolerance Of Shank: H6. Manufactured To Din 6537.



    Manufacturer: Swisstech
    ID: Crswt1583530s
    Category: Cutting Tools , gt, Hole Making , gt, Carbide Drills , gt, Carbide High Performance Production Drills
    SKU: Swt1583530s




Workshop S25t Ptfnr 16 C/w 10 'k' Style Inserts
    Workshop S25t Ptfnr 16 C/w 10 'k' Style Inserts.

    90ã‚â° Approach.uses Tn_g Inserts. Tool Supplied Complete With 10 Carbide Inserts, In A Choice Of P Grade For Steels And General Use, Or K Grade For Cast Iron And Non-ferrous Applications. Inserts Supplied Will Vary According To Availability.



    Manufacturer: Workshop
    ID: Crpro1067200k
    Category: Cutting Tools , gt, Turning , gt, Iso Boring Bars , gt, Boring Bars - Lever Lock
    SKU: Pro1067200k




Kennedy 6pce Sharpening Stone Set
    Kennedy 6pce Sharpening Stone Set.

    Supplied In A Wooden Case, This Six Piece Set Is Specially Selected To Cover The Majority Of Sharpening Applications. All Stones Are 13 X 100mm Medium Grit Supplied In Both Aluminium Oxide And Silicon Carbide. Contents: 2 Square, 2 Three Square And 2 Round.



    Manufacturer: Kennedy
    ID: Ken-255-9000k
    Category: Abrasives , gt, Finishing , amp, Polishing , gt, Oilstones , amp, Whetstones
    SKU: Ken2559000k




Kobe Red Line 25x6.5mm Felt Lapping Wheel
    Kobe Red Line 25x6.5mm Felt Lapping Wheel.

    Suitable For Use With Kobe, Dremel And Osaki Multi Tools.felt Polishing Bobsfor Use With Polishing Compounds To Produce A High Finish. Use With Spindle Shown Below.



    Manufacturer: Kobe Red Line
    ID: Kbe-280-3323k
    Category: Abrasives , gt, Finishing , amp, Polishing , gt, Polishing Bobs, Cones , amp, Sticks
    SKU: Kbe2803323k




Qconnect Q Connect 4x20x50mm Quick Tabs Transparent
    Qconnect Q Connect 4x20x50mm Quick Tabs Transparent.

    Repositionable Tabs Ideal For Marking, Tabbing, Highlighting And Colour Coding All Your Important Information. Available In Packs Of Four Colours, 40 Tabs Per Colour.



    Manufacturer: Qconnect
    ID: Kf01225
    Category: Office Supplies , amp, Stationery , gt, Office Essentials , gt, Self Stick Notes
    SKU: Que8270240k




Yamaloy Apxt(apkt) 1604pdtr Insert Grade K20
    Yamaloy Apxt(apkt) 1604pdtr Insert Grade K20.

    Apxt(apkt) Milling Inserts85ã‚â° Parallelogram Insertinsert Grade K20(k05-k20) Micrograin Uncoated. For Cast Irons, Aluminium Alloys, Other Non-ferrous Materials Including Titaniums And Nickel Alloys.



    Manufacturer: Yamaloy
    ID: 5600441
    Category: Cutting Tools , gt, Milling , gt, Milling Inserts
    SKU: Yml1200031v




Q-torq Tcw10 Calibrated Slipper Wrench
    Q-torq Tcw10 Calibrated Slipper Wrench.

    Micrometer Style Fine Adjustment With Positive Locking System. Automatic Resetting With Audible Click When The Wrench Slips. Accurate Repeatability. Aircraft Specification Stainless Steel Heads, Aluminium Handles. Designed To Operate In Any Environment From The Toughest Engineering Production Line To Fine Finish Assembly Areas. Manufactured To Iso 6789 : 2003.



    Manufacturer: Q-torq
    ID: 056040a10290
    Category: Hand Tools , gt, Torque Tools , gt, Torque Wrenches , amp, Accessories , gt, Torque Wrenches
    SKU: Ken5557100k




Solent Maintenance Osrta-1 Oil Stain Remover Tarmac & Asphalt 1ltr
    Solent Maintenance Osrta-1 Oil Stain Remover Tarmac & Asphalt 1ltr.

    A Biological Oil Stain Remover That Rapidly Removes And Digests Oil Stains From Block And Concrete Driveways, Garage Floors And Forecourts. Size: 1.0ltr And 5.0ltr.



    Manufacturer: Solent Maintenance
    ID: Osrta-1
    Category: Lubricants , amp, Chemicals , gt, Industrial Cleaners , amp, Solvents
    SKU: Sol7075858a




Matlock Class 13 Ce 2 B/bearing Hinges Sss 100x75x3mm Pk2
    Matlock Class 13 Ce 2 B/bearing Hinges Sss 100x75x3mm Pk2.

    523cece Class 13 Fire Hinge. Available In Polished Or Satin Stainless Steel Finish. Grade 304 Stainless Steel. One Hour Fire Tested. Stainless Steel Pin. Complete With Screws.



    Manufacturer: Matlock
    ID: 14854
    Category: Materials , amp, Maintenance , gt, Hardware , gt, Hinges
    SKU: Mtl9494450k




Vulcascot Type B 10x30mmx9m Rubber Cable Protector
    Vulcascot Type B 10x30mmx9m Rubber Cable Protector.

    'snap Fit' Flexible Cable Protectors Are Designed For Indoor And Out Door Use.the Industrial Range Was Developed Principally For Heavy Duty Work Such As Warehouse Or Building Site Applications. The Temporary Traffic Calmers Fitted With Yellow Warning Stripes Can Also Be Used As Speed Ramps Or Traffic Calmers.contact Your Local Branch For More Details.coil Length: 9.0m.colour: Black (not Illustrated).



    Manufacturer: Vulcascot
    ID: 26400120
    Category: Power Tools , gt, Electrical Accessories , gt, Cable Protectors , gt, Cable Protectors
    SKU: Vul2818820k




Kennedy 15 Pleated Pocket Tool Roll
    Kennedy 15 Pleated Pocket Tool Roll.

    Waterproof, Puncture-resistan And Rot-proof Pvc Outer With Medium Duty, Non-scratch Cotton Inner. With 15 Pleated Pockets, Two Webbed Ties. Tools Secured With Flap Cover.tools Not Included



    Manufacturer: Kennedy
    ID: Tr-15p
    Category: Storage , amp, Handling , gt, Storage , gt, Tool Storage , gt, Tool Belts, Pouches , amp, Rolls
    SKU: Ken5930440k




Kennedy Green Basic Trousers - Size S
    Kennedy Green Basic Trousers - Size S.

    Studded And Elasticated Waist And Press Stud Ankle Adjustment.



    Manufacturer: Kennedy
    ID: 2pn/ep3
    Category: Personal Protection , amp, Clothing , gt, Clothing , amp, Workwear , gt, Trousers
    SKU: Ken9626300k




Pcl Bg5002 Plastic Blow Gun
    Pcl Bg5002 Plastic Blow Gun.

    The Body Is Moulded From A Special Acetalic Resin To Resist Damage, Staining And Contamination With A 100% Brass Inner Valve. The Blow Gun Adjusts The Airflow Gradually For Delicate Working. Also Availabel With A 230mm Extension Nozzle That Can Be Cut And Bent To Suit User Pplications. Suitable For Use With Both Air And Water. Recommended Working (outlet) Pressure Of 2bar/30psi.



    Manufacturer: Pcl
    ID: Bg5002
    Category: Power Tools , gt, Air Tools , gt, Air Blow Guns
    SKU: Pcl2592402g




Kennedy 8"x5/16" Spark Resistant Eng. Screwdriver Be-cu
    Kennedy 8"x5/16" Spark Resistant Eng. Screwdriver Be-cu.

    Parallelspark-resistant Tools Are Used To Eliminate The Chances Of Accidental Fires Or Explosions In Potentially Combustible Or Explosive Environments. They Resist The Sparks That A Standard Tool Could Potentially Create When Striking Hard Surfaces. The Use Of Spark Resistant Tools Is Essential In Many Industrial Applications Such As Petroleum And Chemical Manufacturing, Spray Booth Operations, The Marine Industry, The Mining Industry, The Paper Industries, Or Any Location Where Flammable Vapours Or Combustible Residues Are Present. Beryllium Copper Are Manufactured To 30-10hrc And Offer A Breaking Strain Of 1117 N/m - 1236 N/m. Spark-resistant Tools Must Be Maintained With Special Care. Frequent Cleaning/re-dressing To Remove Ferrous Particles Or Contaminants, Which May Impair The Spark Resistant Properties, Is Essential.



    Manufacturer: Kennedy
    ID: 260p-1026
    Category: Hand Tools , gt, Non Sparking Tools , gt, Non Sparking Screwdrivers
    SKU: Ken5753980k




Swisstech 5.0 Scr Short 3fl Slot Dr Ill-ticn-8% Co
    Swisstech 5.0 Scr Short 3fl Slot Dr Ill-ticn-8% Co.

    Series 32 - Short Series, Ticn Coateddimensions To Din 327. Centre Cutting. Threaded Shank To Din 1835b. Cutting Diameter To E8. Shank Diameter To H6. Available In Hss-co 8% Uncoated (for General Production Machining), Hss-co 8% Ticn Coated (extends Cutter Life And Improves Work Material Surface Finish) And Hss-co 8% Tialn Coated (dissipates And Resists Heat, Reduces Surface Friction Coupled With High Surface Hardness).



    Manufacturer: Swisstech
    ID: E7491050
    Category: Cutting Tools , gt, Milling , gt, Slot Drills , gt, Hss-co, Slot Drills - Short Series
    SKU: Swt1633235a




Polycell Polyfilla Advanced Polyfiller 600ml
    Polycell Polyfilla Advanced Polyfiller 600ml.

    Fills Holes Up To 50mm Deep In One Application Will Not Shrink Or Sag. Smooth, No Sanding Finish. Quick Drying (ultimate Drying Time Depends On Depth Of Hole And Conditions) For Plaster, Plasterboard, Ceiling Coving And Mouldings (not Suitable For Drilling).size: 600ml.



    Manufacturer: Polycell
    ID: 5085022
    Category: Adhesives , amp, Sealants , gt, Fillers
    SKU: Ctl7037314c




Matlock Saa Letter Plate 305x100m M
    Matlock Saa Letter Plate 305x100m M.

    Finished In Aluminium And Stainless Steel.sizes: Aluminium: 355 X 125mmm, Stainless Steel/polished Brass: 330 X 110mm.



    Manufacturer: Matlock
    ID: In366abrass
    Category: Materials , amp, M Aintenance , gt, Hardware , gt, Brackets, kick, letter, push Plates, corner Braces , amp, Plates
    SKU: Mtl9495870k




Iscar Tag N3c Insert Grade Ic80 7
    Iscar Tag N3c Insert Grade Ic80 7.

    Tag N-c/w/m : First Choice For The Parting Of Bars, Hard Materials And Tough Applications. A Positive Rake, Single Cavity (except 7 & 12 Mm With Double Cavity), Negative Land And Shoulders, Provides Extra Cutting-edge Strength. Medium-to-high Feeds. Grade : Ic807use On Austenitic Stainless Steel And Hard Steel.iso Range - P/m/k (p10-p30)(m05-m20)(k10-k30)iso Range - H/s/n (h05-h15)(s05-s20)grade Or Coating Type Pvdcoating Layers Tialn+tin Grade : Ic908machining Conditions.iso Range - P/m/k (p15-p30)(m20-m30)(k20-k40)iso Range - H/s/n (h10-h20)(s10-s25)grade Or Coating Type Pvdcoating Layers Tialngrade : Ic928heavy Operations.iso Range - P/m/k (p20-p40)(m25-m35)iso Range - H/s/n (s15-s30)grade Or Coating Type Pvdcoating Layers Tialn



    Manufacturer: Iscar
    ID: 6003625
    Category: Cutting Tools , gt, Parting , amp, Grooving , gt, Inserts , amp, Blades , gt, Parting Inserts
    SKU: Isc1316870n




Loctite 5900 High Performance Silicone Gasket Black 300ml
    Loctite 5900 High Performance Silicone Gasket Black 300ml.

    High Performance Silicone Gaskettypical Applications Include Stamped Sheet Metal Covers. It Withstands On Line, Low Pressure Tests Carried Out Before Product Begins To Cure. The Thixotropic Nature Reduces The Migration Of Liquid Product After Application To The Substrate And Has An Excellent Adhesion Profile To An Outstanding Wide Variety Of Plastic Substrates. Registered To Nsf Category P1 For Use As A Sealant Where There Is No Possibility Of Food Contact In And Around Food Processing Areas.



    Manufacturer: Loctite
    ID: 2061874
    Category: Adhesives , amp, Sealants , gt, Gaskets , amp, Sealants , gt, Gaskets , amp, Jointing
    SKU: Loc7255740r




Spontex Essentials Tough Scourers (pk-4)
    Spontex Essentials Tough Scourers (pk-4).

    Heavy Duty Removes The Toughest Burnt On Food And Grease. Easy To Rinse Out. Stainless Steel. Assorted. Pack Quantity: 4.



    Manufacturer: Spontex
    ID: 66000076
    Category: Cleaning , amp, Hygiene , gt, Cleaning Hardware , gt, Scourers And Sponges
    SKU: Spo9070040k




Rutland 2-way Male Snap Action Connector
    Rutland 2-way Male Snap Action Connector.

    This Fitting Is For Connecting Two Hoses With Both Having Female Fittings On The End.



    Manufacturer: Rutland
    ID: Dy8016
    Category: Hand Tools , gt, Gardeners , amp, Contractors , gt, Hose Pipe Accessories
    SKU: Rtl5234460k




Bosch 2608600223 125x22.2x6mm Metal Grinding Disc
    Bosch 2608600223 125x22.2x6mm Metal Grinding Disc.

    2608600223depressed Centre Grinding Disc Appropriate For Hand Held Angle Grinders.



    Manufacturer: Bosch
    ID: 2608600223
    Category: Abrasives , gt, Cutting , amp, Grinding Discs , gt, Grinding
    SKU: Bch2802731m




Gpc Industries Ltd Ats07z Aluminium Swingbac K Steps - 7 Tread
    Gpc Industries Ltd Ats07z Aluminium Swingbac K Steps - 7 Tread.

    Unique Strengthening Beam Incorporated Into Non-slip Treads. Rubber Feet And Aluminium Side Arms Help Prevent Slips And Twists As There Are No Tapes Or Flimsy Arms To Break. Lightweight And Easy To Carry.images Are For Illustration Purposes Only



    Manufacturer: Gpc Industries Ltd
    ID: Ats07z
    Category: Site Safety , gt, Ladders, Steps , amp, Access Equipment , gt, Step Ladders
    SKU: Gpc9390960g




Mk Electric K5060rpwhi 45amp Doublepole Cooker Switch Socket
    Mk Electric K5060rpwhi 45amp Doublepole Cooker Switch Socket.

    Rotary Operated Shutter. Fixing Centres120.6mmbs 4177:1992



    Manufacturer: Mk Electric
    ID: K5060rpwhi
    Category: Electrical , gt, Wiring Accessories , gt, Plugs And Sockets , gt, Electrical Sockets
    SKU: Mke2820141h






Brake | Steering | Auto | Ignition | Belts | Engine | Fuel | Vehicle

Copyright © 2024 MotorHolder.com All rights reserved.
With any using link to MotorHolder.com strongly required.