Ff Ewx: Helido Upfeed Endmills For Fast Feeed, Carrying Double-sided Inserts With 6 Cutting Edges.

Round Ldpe Bottles Fitted With A Pivoting Nozzle Closure. The Nozzle Retracts Into Cap To Seal Bottle. Suitable For Use As A Dropping Or Wash Bottle And Excellent For Dispensing Gels. Good Resistance To Chemical Attack.

Durable Blocked Bullet Tip For Heavy Use. Marks On Most Surfaces Even Wet And Oily. Xylene And Toluene-free. Plastic Cap With Pocket Clip. Easy To Cap/uncap.line Width: 1mm.

To Suit The Whitney Junior Metal Punch (whi-560-0501a)

Fc07 - Engineers Studmaterial: Medium Carbon Steel.hardness: Hrc 30 - 35.surface Finish: Black Oxide.

Fco8 - T-slot Nut (ground)ground Surfaces Provide Accurate Positioning Inside Of T-slot.material: Medium Carbon Steel.hardness: Hrc 30 - 35.

For Weldon Shank Cutters, Adaptors And Tapping Chucks. Manufactured To Stringent Quality Standards.

200 Joules Steel Toe Cap Impact Protection. Guards Against Falling Objects And Collisions. Steel Midsole To Prevent Sharp Object Penetration. Ideally Suited To Building Sites And Where Metal Swarf Is Present On Floors. Resists The Build-up And Conductance Of Static Electricity. Of Most Benefit When Walking On Synthetic Carpets Or Near Electrical Machinery. Dual Density Polyurethane/rubber Soles For Extra Comfort. The Sole Features A Nitrile Rubber Outsole, Resistant To Heat To 300ã‚â° And A Low Density Polyurethane Interlayer, For Increased Comfort And Shock Absorption.s1 Classified.manufactured To En Iso 20345:2011.

A Biological Oil Stain Remover That Rapidly Removes And Digests Oil Stains From Block And Concrete Driveways, Garage Floors And Forecourts.size: 1.0ltr And 5.0ltr.

A Horseshoe Type Cylindrical Magnet. Opposing Poles Are At The Same End Of The Magnet Separated By A Slot. Supplied With A Plain Bore And Keeper. Permanently Magnetic.

Resistant To Oil And Chemicals. Heavy- Duty Polyethylene Which Will Not Shatter Or Break In Cold Weather.

Ball Point Hexagon All Kennedy Screwdriver Bits Have A Hardness Of 58 - 62hrc. High Alloy Chrome Molybdenum Steel For Use On Hand And Power Tools.

Plastic Pistol Grip With Slip Resistant Grooves, Spring Steel Frame. Complete With Blade.

8mm Hexagon Key. 140mm Handle For Optimum Leverage And Grip. Suitable For Disc Brake Caliper Retaining Bolts On Many Modern Cars. Manufactured From Chrome Vanadium Steel With Corrosion Resistant Phosphated Finish.

Simple Efficient Mousing. Simple Design Is Comfortable To Use. Perfect For Left And Right Handed Use. No Installation Needed.

Metric 9 Piece Long Arm Set Manufactured From Fully Hardened Carbon Steel In Accordance With Din 911 Ensuring A Quality Ductile Key With Precision Square Cut Ends And Accurate Af Dimensions To Ensure Full Socket Contact. Black Finish.contents: 1.5 X 77, 2 X 83, 2.5 X 90, 3 X 98, 4 X 106, 5 X 118, 6 X 137, 8 X 156, And 10 X 170mm.

Bonds Most Substrates Including Plastic, Rubber, Metal, Card And Wood. High Viscosity Suited Where Gap Fill Is Required.gap Fill: 0.25mm.colour: Clear. Temperature: -40 To +100ã‚â°c.comment: Universal, Medium Viscosity.

This Tough Enamel Has Long Lasting Flexibility When Used To Cover Rust, Bare Metal And Wood, Repelling Moisture To Give Long Term Protection. It Must Be Applied In Temperatures Of 5ã‚â° C Or Above And Is Sag-resistant To Eliminate Brush Strokes, Dilutable By White Spirit And Can Be Used For Interior Or Exterior Applications.

Fully Synthetic Formulation. Long Working Life Therefore Economical. Minimises Wheel Glazing. Effective Corrosion Resistance. Stable Emulsions In Soft And Hard Water. Does Not Contain Ptbba.recommended Concentration For General Machining Opeerations:grinding Cast Iron 2 % To 3.5% Or (a Dilution Of 50 To 1 Or 30 To 1).steel And Ni/cr Steel 2% Or (a Dilution Of 50 To 1).available In Grade Sc-gs.supplied In 20 Litre Stacking Poly Container.

General Purpose Chamfering/deburring And Countersinking Tool. Bright Finish, 3 Flute, Ground All Over. Made To Din 335. 5 Piece Set Contents: 6.30, 8.30, 13.40, 15.00 And 19.00mm.

For Maintenance Of Hedges/hedge Laying. Stafford Bill Hookheavy Section Double-edged Blade With Curved Hacking Edge And Straight Chopping Edge. Round Section Handle. Carbon Steel.blade Length: 255mm. Overall Length: 405mm.

Ideal For Use In Laboratories, Electronics, Food Preparation And Pottery Industries.

These Self-adhesive Numbers And Letters Are Printed Black On Yellow, Enabling High-visibility Identification. Simply Applied, They Can Be Quickly Removed And Leave No Adhesive Residue. They Are Available In Eight Sizes, And Are Suitable For A Variety Of Uses Throughout The Warehouse Including Labelling Of Shelves, Racking, Bins And Other Areas. They Are Also Suitable For Use In The Office For Labelling Files Etc. Eight Sizes In Black On Yellow With Identical Digits On Each Card. Colours Are Only Available In Sizes F1, F2 And F3. Cards Can Be Supplied In Packs Of A - Z And 0 - 9 Or As Mixed Numbers And Letters On Request. Cards Of Directional Arrows Are Available In Sizes F3, F4, F5, And F6.*when Ordering Individual Characters Please Complete The Order Code By Adding The Character Required To The End Of The (incomplete) Code Given Below. E.g. For A Sheet Of Letter T In Size F2 Please Order Bvw-966 -0020t.images Are For Illustration Purposes Only

Product Descriptionarrow Jt21 Staplesstaples To Fit Jt21/21c Staple Gun.size 5/16in.box 1000.manufacturer's Descriptionarrow Jt21 Staplesstaples To Fit Jt21/21c Staple Gun.size 5/16in.box 1000.

This Dremel Kit Includes The 4000 Multi-tool With The New Ez Twist Nose Cap; No Wrench Is Needed When Changing Accessories. It Can Be Easily Fixed To The Wall And Includes A Removable Accessory Tray And Tool Holder. The Kit Has 65 Dremel Accessories And Contains The Flex Shaft, The Line And Circle Cutter, The Detailer's Grip And The Shaping Platform Attachment.