Economical And Stylish Eye Protection With Sport Temples For A Fashionable Yet Comfortable Fit. Sporty- Wrap-around Design.en 166 1f K.

Quick Start 1 And 2 Ply Centre-feed Rolls. Reduced Dispenser Refill Time And No Cardboard Cores To Dispose Of. Ideal For Hand And Surface Wiping In Washrooms, Kitchens And General Workplaces. For Use With Tork Centre-feed Dispensers M2.rolls Per Pack 6.100154 Wiper 415*colour: White. 1-plyroll Size: 275m X 20cm.128208 Wiper 415*colour: Blue. 1-ply.roll Size: 320m X 20cm.151131 Wiper 415colour: White. 1-ply,.roll Size: 275m X 20cm. 128207 Wiper 420colour: Blue. 2-ply. Roll Size: 157m X 20cm.sheets Per Roll: 450.101260 Wiper 420colour: White. 2-ply. Roll Size: 160m X 20cm.sheets Per Roll: 450.*items Marked Are Continuous (non-perforated) Rolls.

Series A1249 Hss-co Straight Shank Jobber Drill - Tialn Coatedmetric High Performance Drill With Extremely Good Chip Evacuation, Especially To Be Utilsed On Lathes, Automatics And Cnc Equipment. Preferably For Long Chipping Materials Such As Steels Up To 1300n/mm2, Including Stainless Steels (300 Series), Aluminium, Copper Alloys And Brass. Coated With Tialn Futura For High Machining Data And Exceptional Tool Life. Also Suitable For Dry Machining Of Steel Materials. 130ã‚â° Point Geometry. Manufactured To Din 338 & Bs 328.

1/2" Square Drive. 22mm Hex. X 90mm Length. Cutaway Section Allows Socket To Pass Over Wiring.

Powder-free Vinyl Disposable Gloves. Protects Against Contamination, Dirt And Potential Irritants In Low Risk Situations. Aql 4.0. For Minimal Risk Only.cat I

This Push-on Type Pressure Gauge Is Graduated In Psi And Bar Up To A Maximum Of 64psi (4.5bar). The Reading Is Held Until The Release Button Is Pressed.

Masonite Clipboards Manufactured From Strong Cardboard/pvc Heavy Duty Clip Ensures That Papers Are Held Secure.ideally Suitable For Stores, Warehouse, Stocktaking And Inspection Procedures.size: A4 And A3.images Are For Illustration Purposes Only

Acts As A 'third Arm' Allowing Many Clamping Set-ups Not Normally Possible Without The Use Of Additional Or Oversized Clamps. Locates Onto The Cross-section Of The Clamp Frame Allowing Clamping Pressure To Be Applied Between The Clamp Frame And The Workpiece.

Tough, Moulded, Textured Seat With Black Epoxy Coated Frame, Suitable For Both Indoor And Outdoor Use.heavy Duty.size: 430 X 455 X 790mm.

Replacement Shield Suitable For Small Machine Tools. Protects From Fluid Splash And Flying Swarf. For Use With: Lln-447-6052flln-447-6052glln-447-6052h

The Makita Hr2600 26mm 2-mode Rotary Hammer Drill Adapted For Sds Plus Bits, Featuring A Compact And Lightweight Design, Enhanced Comfort And Better Control With Ergonomic Handle.

Designed For Cleaning And Finishing On All Metals. Leaves A Burr-free Surface Ready For Painting Or Coating. Can Also Be Used For The Removal Of Light Rust, Oxides And Coatings.

The Most Versatile Knife And Saw Set Available. Seven Assorted Blades Enable The Following Variations And Uses: Utility Knife, Snap Off Blade Knife, Scraper, Pad Saw, Wood Saw. One Screw Enables Rapid Blade Change.

Dwe492k - 230 Mm Angle Grinder + Kitboxabrasion Protected Motor For Increased Durability. Two Position Side Handle Allows The User To Optimise Handle Position To Give Maximum Comfort. Spindle Lock For Quick Wheel Changes And Brush Window Allowing Quick Brush Replacement.

Hinged Through 180ã‚â° In Both Directions. Knurled For Extra Grip.drive Male X Female: 1/4ã¢â‚¬ï¿¾ X 1/4ã¢â‚¬ï¿¾.

The Classic Cut Of These Honey Nubuck Leather Safety Boots An Extremely Popular Choice. The Premium Grade Nubuck Upper Is Complimented By The Natural Colour Durable Rubber Outsole Which Has Been Goodyear Welted To The Upper To Give You A Tough And Durable Bond. The Steel Toe Cap And Midsole Provide The Safety Protection, While The Padded Collar And Tongue Enhance Comfort. Manufactured To En 345. 200 Joules Toe Protection.

1" Duplex - Pilot Borea Full Range Of Sprockets In Both Taper Bore & Pilot Bore Are Available In Simplex, Duplex And Triplex Styles. We Also Carry A Complete Range Of Taper Bore Bushes And Keyway Steels To Suit.ã¢â‚¬â¢ All Sprockets Are Manufactured To Exacting Standards And Specificationã¢â‚¬â¢ Taper Bore Bush Versions Allow For Quick And Simple Installation Without The Need To Machine The Sprocketã¢â‚¬â¢ Boring And Keyway Service For Pilot Bore Sprockets Is Available On Requestã¢â‚¬â¢ Cast Iron And Stainless Steel Sprockets Are Also Availableã¢â‚¬â¢ Double Pilot Type Also Available

Ideal For Heavier Weight Items: Catalogues, Files, Computer Printouts, Mail Order Textiles. Also Available In Dx Legal Document Pouch Sizes. Accepts All Lasting Endorsements.

Socket Set 3/4" Square Drivesockets: 21, 24, 27, 30, 32, 34, 36, 38, 41, 46 And 50mm.accessories: 320mm Rarchet Wrench, 400mm Sliding T-handle, 200mm Socket Extension.spark-resistant Tools Are Used To Eliminate The Chances Of Accidental Fires Or Explosions In Potentially Combustible Or Explosive Environments. They Resist The Sparks That A Standard Tool Could Potentially Create When Striking Hard Surfaces. The Use Of Spark Resistant Tools Is Essential In Many Industrial Applications Such As Petroleum And Chemical Manufacturing, Spray Booth Operations, The Marine Industry, The Mining Industry, The Paper Industries, Or Any Location Where Flammable Vapours Or Combustible Residues Are Present. Beryllium Copper Are Manufactured To 30-10hrc And Offer A Breaking Strain Of 1117 N/m - 1236 N/m. Spark-resistant Tools Must Be Maintained With Special Care. Frequent Cleaning/re-dressing To Remove Ferrous Particles Or Contaminants, Which May Impair The Spark Resistant Properties, Is Essential.

5727 1/4" Unf Powertap Type N Spiral Point In Hss-e With Steam Tempered Finishshank Diameter: 4.5mmflute Length: 30mmoverall Length: 80mmcutting Edge Length: 16mmdriving Square Sw: 3.4mmpitch: 28

Revolutionery In Its Design The Executive Vest Combines The Light Weight Of A Waistcoat With The Practicallity Of Pockets For Those Situations When A Jacket May Be Too Warm. A Clear Id Pocket For Security Passes And Cards Compliments This Unique Garment.2 Side Pockets With Flaps.mobile Phone Pocket And Id Pocket.5 Cm Hivistex Reflective Tape.front Zip Fastening.certified To En471 Class 1:2material: 100% Polyester.colours: Yellow/navy

Gst150bcehigh Power Reserves, Due To Powerful And Overload-capable Motor. Tool-free Saw Blade Clamping System For Fast Saw Blade Changes. 4-stage Pendulum Action. Electronic Speed Preselection.rated Power Input: 780w.no Load Stroke Rate: 500 - 3,100spm.weight: 2.70kg.stroke Height: 26mm.cutting Depth: Wood 150mm, Aluminium 20mm, Non-alloyed Steel 10mm.

Imperialfor Use In Confined Areas Where There Is Not Enough Space To Fit A Normal Spanner At 90ã‚â°. Typically Used In A Car Engine To Reach Down Into A Spark Plug Recess Or Similar.

Green Pvc Supported Chemical Resistant Boilersuit.standard Boilersuit With Hood.two Overlapping Flaps Over Zip Secured By 5 Studs Give Excellent Chemical Protection.all Seams Are Sewn And Welded To Give Increased Protection In Vulnerable Areas.conforms To En340, En465 And En368.

The Uvex 1 Range Is Styled With The Stresses And Strains Placed On The Foot In Mind. These Black Safety Trainers Support The Natural Movement Of The Body With Their Ergonomic And Lightweight Design. Ankle Safety Comes Courtesy Of Increased Anti-twist Stability. They Are 100% Metal-free With A Composite Xenova Toe Cap For Protection. The Dual Density Pu Sole Provides Excellent Shock Absorption And Is Rated Src For Slip Resistance.other Features Include A Removable Comfort Insole, Elastic Laces For Easy Adjustment, And A Mesh Lining For Excellent Breathability. Uvex's Climazone Technology Acts To Keep Your Feet At A Comfortable Temperature Throughout The Day. The Outsole Is Contact Heat Resistant To 120c.manufactured To En Iso 20345 And Rated S1 Src. Esd Rated.