|
|
Guhring 5543 3.00mm Carbide Sl Slot Drill.
Guhring 5543 Alu-slot Drills (2 Fluted)conforms To:- Din 6527ltool Material:- Vhmcarbide Grade:- Ktype:- Wcutting Direction:- Right Handcooling:- Without Coolanttolerance:- E8shank Design:- Din 6535-hbhelix Angle:- 45 Degreesflutes:- 2
Manufacturer: Guhring
ID: 05543 003.000
Category: Cutting Tools , gt, Milling , gt, Slot Drills , gt, Carbide Slot Drills - Regular Series
SKU: Gur1614303a
|
|
|
Holts Gg2r Gun Gum Paste 200gm.
Permanently Repairs Small Holes And Leaks In Silencers And Exhaust Systems. Provide S A Gas-tight Seal. Easy To Use.size: 200g.
Manufacturer: Holts
ID: Gg2r
Category: Automotive , gt, Repair , g, t Sealant
SKU: Hlt7323000q
|
|
|
Hi-tech Rx20/r20/mn1300 Rechargeable Batteries (pack-2).
D Type Nickel Cadmium Rechargeable Batteries, Rechargeable Up To 1000 Times. Ideal For High Load Uses Like Tape Recorders, Photo Flahes, Toys, And Other Motorised Equipment.type: D. 1.2v Nickel Cadmium
Manufacturer: Hi-tech
ID: Crhtc9042010a
Category: Office Supplies , amp, Stationery , gt, Batteries , amp, Chargers , gt, Nicad Batteries
SKU: Htc9042010a
|
|
|
Sherwood 32mmx32mm Hss-cobalt St/s H Knuckle Ripper.
Uncoated Ripper Cutters Uitable For Applications Where High Metal Removal Rates Are Required. Dia. (mm): 32mm.no. Of Flutes: 4. Overall Length: 112mm.
Manufacturer: Sherwood
ID: Shr-061-9040d
Category: Cutting Tools , gt, Milling , gt, Roughing, ripper Cutters , gt, Hss-co, Roughing - Regular Series
SKU: Shr0619040d
|
|
|
Workshop 4ba Sc/sh Counterbore.
Spiral Flute. Medium Duty. Used For Milling Of Pre-drilled Holes To Allow Bolt Or Cap Head Screws To Lie Flush With The Component Surface.
Manufacturer: Workshop
ID: Crisa0217010k
Category: Cutting Tools , gt, Countersinking , amp, Counterboring , amp, Spot Facing , gt, Counterbores Solid
SKU: Isa0217010k
|
|
|
Psf Food Industry Black Safety Wellington S /m/s Size 11-d100sm.
Manufactured To En Iso 20345:2011. Antistatic Sole, Energy Absorbing Heel. 200 Joules Steel Toe Protection, Steel Midsole.
Manufacturer: Psf Food Industry
ID: D100sm Sz.11
Category: Personal Protection , amp, Clothing , gt, Footwear , gt, Wellingtons , amp, Rigger Boots
SKU: Psf9639671k
|
|
|
Kennedy 150x5.00mm Parallel Pin Punch Cushion Grip.
Ideal For Driving Tight Fitting Pins Out Of Mechanical Assemblies Or Realigning Holes To Fit Dowel Pins. Made From Chrome Vanadium Steel With High Strength Octagonal Shanks And Featuring Cushioned Grip Handles With Shock Absorbing Air Pockets.overall Length: 150mm (6").
Manufacturer: Kennedy
ID: 28425 Cvn 5mm
Category: Hand Tools , gt, Engineers Tools , gt, Toolroom , amp, Maintenance , gt, Punches - Pin, Centre, Nail , amp, Taper
SKU: Ken5182335k
|
|
|
Kennedy Heavy Duty Trimming Knife Blades (pk-100).
Heavy-dutyfor Use On Carpets And Vinyl.kennedy Industrial Quality Knife Blades Have A Superior Edge Hardening For Longer Tool Life And Sharper Edge.
Manufacturer: Kennedy
ID: Ind92a
Category: Hand Tools , gt, Cutting , amp, Sawing , gt, Spare Blades
SKU: Ken5372570k
|
|
|
Ullman Devices B-2hd Replacement Oval Mirror.
For Fast Accurate Inspection Of Hidden Areas. Copper Backed Clear-view Glasses. Universal Ball Joints Hold Mirrors Firmly At Any Angle.b-2tmwith Telescopic Handle, Pocket Clip And Magnetic Pick-up. Mirror Size: 25 X 50mm (1ã¢â‚¬ï¿¾ X 2ã¢â‚¬ï¿¾) Oval.
Manufacturer: Ullman Devices
ID: 05b2hd00
Category: Measuring , amp, Test Equipment , gt, Optical Equipment , gt, Magnifying Equipment , gt, Inspection Mirrors , amp, Magnifiers
SKU: Ull5182820k
|
|
|
Kennametal Sekt 1404aeengp2 Insert Grade Kc725m.
Sekt Milling Insertssquare Inserts Insert Grade Kc725m(iso M15-m35, P15-p35, K15-k35) A Multi-layer Tialn- Pvd Coating With A Tough 11.5% Cobalt Substrate. General Purpose Medium-speed Grade For Steels. Good Resistance To Thermal Shock. Suitable For Wet And Dry Machining Applications. Speed Range: 300 - 650 Sfm On Steel Materials; 200 - 500 Sfm On Stainless Steel Materials.
Manufacturer: Kennametal
ID: 2390257
Category: Cutting Tools , gt, Milling , gt, Milling Inserts
SKU: Kml1137939f
|
|
|
Kennedy Panther Black Specs Clear Lens Impact/anti-fog.
Low Energy Impact Protection. Ultra Light Non-allergenic Frame With Low Friction Length Adjustment At The Temples And Front Angle Adjustment. One Piece, Anti-scratch, Clear Polycarbonate Lens With Built In Side Shields For Increased Lateral Protection. Class 1 Optical Quality. Arms Have Hang Cord Attachment Points. Black Universal Hang Cord Ken-960-9620k. Spring Shut Black Spectacle Case Ken-960-9560k.
Manufacturer: Kennedy
ID: 511 00 03 01
Category: Personal Protection , amp, Clothing , gt, Eye Protection , gt, Spectacles , amp, Glasses
SKU: Ken9608010k
|
|
|
Loctite 561 Pipe Sealant 19gm Stick.
Semi-solid Formula, Ideal To Pre-apply. Nsf Food Approved.doesn't Creep, Shrink Or Block Systems.ideal For Maintenance Applications.maximum Pipe Size: 3 In.
Manufacturer: Loctite
ID: 540920
Category: Adhesives , amp, Sealants , gt, Gaskets , amp, Sealants , gt, Pipe Sealants
SKU: Loc7255349m
|
|
|
Qualfast Metric Slotted C/sunk M/c Screw Kit Brass.
Brass Slot Csk M/c Nut And Washer Setcontents: 50 Each Of M4 X 8, M4 X 10, M4 X 12, M4 X 1625 Each Of M5 X 16, M5 X 2015 Each Of M6 X 12, M6 X 16, M6 X 20 And M6 X 25.average Quantity: 310 Sets
Manufacturer: Qualfast
ID: Crqft6155470k
Category: Fasteners , gt, Fastener Assortments
SKU: Qft6155470k
|
|
|
Sterilin Bench Guard Roll Bg50 Ns.
Highly Absorbent Paper Ideal For Protecting Benches And Surfaces Against Liquid Spills. One Side Plastic Coated To Prevent Soak Through. Supplied In Easy To Use Dispenser Packs. Absorption Rate: 400ml/m2.
Manufacturer: Sterilin
ID: Bg50
Category: Site Safety , gt, Spill Control , gt, Absorbent Rolls
SKU: Sts3852001a
|
|
|
Iscar Tpgx 090202-l Insert Grade Ic20n.
Tpgx Turning Inserts 60ã‚â° Triangular Insert 11ã‚â° Positive Flank Inserts With A Ground Chipformer. Used For Finishing, Provide Excellent Surface Finish. Suitable For A Wide Range Of Materials. Insert Grade : Ic20niso Range - (p05-p25)(m05-m15)grade Or Coating Type: Uncoatedcoating Layers: Uncoateda Cermet Grade, Used For Grooving And Turning Applications. Recommended For Semi-finishing And Finishing Operations When Excellent Surface Finish Is Required. Wear Resistant, Prevents Built-up Edge.
Manufacturer: Iscar
ID: 5504405
Category: Cutting Tools , gt, Turning , gt, Iso Turning Inserts
SKU: Isc1153414c
|
|
|
Tungaloy Tcmt 16t304-24 Insert Grade Ns530.
Tcmt Turning Inserts 60ã‚â° Triangular Insertinsert Grade Ns530iso Range - (p05-p25)(m10-m35)coating Layers: Uncoated Cermetuncoated Cermet Grade For Use On Steel And Stainless
Manufacturer: Tungaloy
ID: 6807754
Category: Cutting Tools , gt, Turning , gt, Iso Turning Inserts
SKU: Tsh1166111a
|
|
|
Matlock 4mmx100m 16plt. Orange H/ Tenacity Polyprop Braid.
4mm X 100m Coil. Solid 16 Plait Construction With 25mm Core. Highly Flexible With Polypropylene For Added Strength Nd Durability, Weather Resistant And Will Float On Water. Low Stretch And Smooth Running.
Manufacturer: Matlock
ID: 250/04/0100/07
Category: Materials , amp, Maintenance , gt, Hardware , gt, Ropes
SKU: Mtl9786840k
|
|
|
Avon 9mmx66m Blue Vinyl Tape (pk-6).
Rolls Of Adhesvie Vinyl Tape. 9mm Wide X 66m In Length On 75mm Diameter Cores. Can Be Used In Many Applications, But Are Mainly Sold To Be Used With The Neck Bag Sealer Pack Quantity: 6 Rollsall Prices Are Per Pack
Manufacturer: Avon
ID: Blvt9-a
Category: Adhesives , amp, Sealants , gt, Adhesive Tapes , gt, Electrical Tapes
SKU: Avn9812000k
|
|
|
Ever Build One Strike Lightweight Filler 1ltr.
Shrink And Crack Resistant. Ready To Paint Or Paper In 30 Minutes. Requires Minimal/no Sanding. Suitable For Repairs To Plaster, Wood, Brick, Stone Or Rendering.size: 1ltr And 5ltr.
Manufacturer: Ever Build
ID: One 1
Category: Adhesives , amp, Sealants , gt, Fillers
SKU: Evb7165680w
|
|
|
Bosch 2608584635 51mm Hss-co Progressorholesaw.
Bosch 2608584635 Progressor Holesaw 51mm Features - Progressor Holesaw Kit For Wood And Metal - For The Toughest Demands - Quickly And Steadily Through A Wide Variety Of Materials - Progressive Tooth Strip For High Performance And Fast Chip Clearance - Hss Bi-metal With 8% Cobalt Alloy For Extreme Resilience And A Long Lifetime - The Cutting Quality Depends On The Correct Speed And The Coolant Used (see Operating Instructions) Specification - Diameter (mm): 51 - Diameter Inch: 2
Manufacturer: Bosch
ID: 2608584635
Category: Cutting Tools , gt, Hole Making , gt, Holesaws , gt, Bi-metal Hss
SKU: Bch2802053z
|
|
|
Ganter Gn425-8-100-ni Cabinet "u" Handle; St/steel; Matt.
Gn 425cabinet U Handles - Type Ni Stainless Steelmaterial: Cr Steel. Chrome Plated. Ni Stainless Steel. German Material No.1.4305. Matt Shot-blasted.
Manufacturer: Ganter
ID: Crgan4255043p
Category: Standard Parts , amp, Machine Elements , gt, Knobs, Handles , gt, Handles, U
SKU: Gan4255043p
|
|
|
Guhring 3428 3.00mm M42 4fl End Mill.
3428.short General-purpose Rigid End Mills For Profiling Centre Cutting, Alloyed Steels, Stainless Steels And Non-ferrous Materials. Uncoated.
Manufacturer: Guhring
ID: 03428 003.000
Category: Cutting Tools , gt, Milling , gt, End Mills , gt, Hss-co, End Mills - Regular Series
SKU: Guh0615503a
|
|
|
Milwaukee Ros125e 125mm Random Orbital Sander 240v.
Features:ideal For Sanding Of Wood, Metal And Plastics Within Confined Spaces300 Watt Powerful Motor With 2.4 Mm Orbital Actionvariable Speed (7000-12,000 Rpm) - Especially Needed For Heat-sensitive Materialshook & Loop Paper Fitmentexcellent Dust Extraction - 90% Dust Collection Efficiency With Larger Dust Bageasy To Clean Dust Bagon Board Vac Adaptor- Fits Standard 36 Mm Vacuum Hosessupplied With Textile Dust Bag And Sanding Paper Set (60, 80, 120 Grit)sanding Pad Size (mm): 125sound Pressure Level (db(a)): 81sound Pressure Level Uncertaint [db[a]]: 3sound Power Level [db[a]]: 92sound Power Level Uncertainty [db[a]]: 3vibration Level [m/sã‚â³]: 5vibration Uncertainty [m/sã‚â³]: 1.5no Load Speed (rpm): 7000 - 12,000suplied In: Tool Bagoscillation Rate (opm): 14,000 - 26,000oscillation Diameter (mm): 2.4weight (kg): 1.7power Input (w): 300
Manufacturer: Milwaukee
ID: 4933433190
Category: Power Tools , gt, Corded Power Tools , gt, Orbital Sanders
SKU: Mlw2636390h
|
|
|
Deflect-o Stand Up Sign Holder A4 Clear 47801.
Ideal For Retail Outlets, Restaurants, Trade Shows And More. The 10ã‚â° Slanted Version Is Single Sided And Loads From The Side, The Vertical Holder Is Double Sided And Loads From The Btotom. The Clear Sprung Acrylic Display Clip Holds Menus, Sales Messages And Literature.
Manufacturer: Deflect-o
ID: 018973
Category: Office Supplies , amp, Stationery , gt, Conference , amp, Presentation , gt, Literature Displays
SKU: Def8360210k
|
|
|