Excellent Grip. Extra Comfortable. Excellent Shock Absorption. Excellent Fit. Pu Coated Leather Upper. Pu Midsole, Rubber Outsole. Cambrelle, Polyester And Thinsulate Liner. 200 Joules Impact Protection. Guards Against Falling Objects And Collisions. Aluminium Toecap With Steel Midsole To Prevent Sharp Object Penetration. Ideally Suited To Building Sites And Where Metal Swarf Is Present On Floors. Normally Allows Walking On Hot Surfaces Up To 200ã‚â°c. Resists The Build-up And Conductance Of Staticelectricity. Of Most Benefit When Walking On Synthetic Carpets Or Near Electrical Machinery. Wider Fitting For Extra Comfort. Also Allows The User To Wear Thick Work Socks.manufactured To En Iso 20345:2011s3 Src Ci Hro.

Mxc (iso M15-m25) Coated Micrograin. First Choice For Steels (below 30hrc), Stainless, Cast Iron And Non Ferrous Materials.

All Of Our Rivet Nuts Have A Clear Plating Which Is Rohs Compliant - This Is Now The Preferred Finish Across All Industries As There Is No Chromium Content As Is The Case With Zinc And Yellow Finish.

878 Seriesto Suit The 1961, 1965 And 1966 Series Micrometers. Can Be Fitted To The Anvil Or Spindle On External Micrometers To Enable Round Or Irregular Surfaces To Be Measured. The Ball Is Hardened And Moves Freely To Allow Contact With The Object Being Measured. Note: Always Deduct The Ball Diameter From Every Reading.

Steel Handle Ratchets With Polished Finish. Thumb Lever For Reversing. Din3122, Iso3315. 512-qr Is Quick Release.

Straight & Bent Nose 6 Piece Reversible Circlip Plier Set1 Each Type And Size Of Both Straight And Angled Jaw Circlip Pliers. Supplied In Moulded Carry Case.these Straight And Bent Nose Pliers Are Reversible For Both Internal And External Circlip Insertion And Removal, Made From High Grade Carbon Steel With Comfortable Vinyl Handles.

Eyes: Pack Quantity 1suitable For Temporary And Permanent Anchorage. Supplied Complete With Shield, Washer And Hex Nut. Must Not Be Used For Safety Harness Applications Or For Lifting Where Shock Load Could Be Applied.typical Applications Include Supporting Guy Ropes, Stays, Cables And Supporting Ladder Restraints.

Ideal For A Wide Variety Of Tasks Around The Workshop, Home And For Use When Applying Creosote, Cleaners And Degreasers Etc. Wooden Handles With Pure Bristles.

3/8ã¢â‚¬ï¿¾ Drive Inch Size, Standard Length, 6-pointconform To: Sae, Usa Federal Standard Ggg-w-660a.manufactured From High Quality Chrome Molybdenum Steel. Black Oxidised Finish With Permanent Laser Etched Markings.

The Original British Designed Safety Knife Has A Unique Patented Valley, Which Guides The Material To Be Cut Directly Along The Surgical Steel Blade. Impact Resistant Nylon Casing For Durability. Textured Surface For Firm Grip, Even When Wet. Optional Hook Blade For Cutting Cardboard And Tape. Only Blunt Edges Are Exposed.images Are For Illustration Purposes Only

Manufactured From High Grade Chrome Vanadium Steel To International Standards Iso 2936 & Din 911.supplied In A Tough Abs Plastic Case For Easy Storage And Selection.metric - 10 Piece Set Conttents: 1.5, 2, 2.5, 3, 4 , 5, 6, 7, 8 And 10mm.inch - 10 Piece Set Contents: 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16" And 3/8".

Manufactured From Hardwearing Nubuck Leather Upper With A Dual Density Heat Resistant Polyurethane/rubber Soles That Are Cemented To The Upper For Durability And Extra Comfort Throughout The Day. Deep Padded Collars With A Low Profile Around The Achilles Provide Protection For Your Ankles From Knocks And Bumps. Padded Tongues Evenly Distribute The Pressure Of The Laces Across The Bridge Of Your Foot To Help Ensure A Comfortable Fit. The 'u' Hooks Allow For Rapid Lacing/unlacing And Easy Fit Adjustment Of The Boot. Leather Upper With A Dual Density Antistatic Sole.

A2 Stainless Steel Socket Button Screw Kitcontents: 50 Each Of M5 X 12, M5 X 16, M5 X 20mm25 Each Of M6 X 12, M6 X 16, M6 X 20, M6 X 25mm20 Each Of M8 X 20, M8 X 25, M8 X 30mmaverage Quantity: 310 Pieces

3m Axkt Milling Insertsinsert Grade : Ic328iso Range - P/m/k: (p25-p40)(m30-m40)iso Range - H/s/n: (s20-s30)grade Or Coating Type: Pvdcoating Layers: Ticna Thin Pvd Coated Ticn Layer On A P45-k40 Substrate. Very High Toughness. For Milling, Parting And Grooving Of Steel, Stainless And Alloy Steels At Low To Medium Cutting Speeds And For Unstable Machining Conditions.

S845 Sxmu Milling Insertsinsert Grade Ic928iso Range - P/m/k: (p20-p40)(m25-m35)iso Range - H/s/n: (s15-s30)grade Or Coating Type: Pvdcoating Layers: Tialn S845 Sxmu 1606 Adtr-mm Insert Has Eight Helical Right-hand Cutting Edges, Providing A Very Economical Solution. It Is Very Thick And Strong And Has A Wiper Which Leaves An Excellent Surface Finish. The Insert Is Clamped By A Strong M5 Screw Into An Inclined Dovetail Pocket Which Provides A Very Rigid Clamping. Due To The Most Advanced Production Technology, Excellent Grade Combinations, Unique Chip Deflector And Positive Cutting Angles, The New Face Milling Tools Family Features High Durability, Low Cutting Forces And Excellent Tool Life. The New Insert Can Be Used For Machining Steel, Stainless Steel And Cast Iron At Very High Machining Parameters.

The Solent Cleaning And Hygiene Pouch Hand Cleanser/soap System Uses 2ltr Sealed Pouch Cartridges To Minimise Spillages And Waste, This System Helps To Prevent Cross Contamination. A Full Range Of Barrier Creams, Sanitisers, Soaps, Beaded Hand Cleansers And Afterwork Reconditioning Creams Are Available For Use With The Dispensers.dispenser Pumpsall Creams, Soaps And Gels: Use With 2mm Pump.all Beaded Hand Cleansers: Use With 3mm Pump.size: 2ltr.

A Range Of Ribbons To Suit The Most Popular Printers And Typewriters. This Is A Small Selection Of A Wide Range Of Ribbons, So If Your Machine Is Not Listed Please Call Us. We Will Match Your Printer Or Typewriter To The Correct Ribbon.

R14, Light, Easy To Use Metal Staple Gun. All-steel Casing And Wear Parts Inside.compatible Staples:type 140 6-8mm

5564conical Type Flap Discs - Zirconium On Fibreglass Backing. For Grinding At An Angle Of 15-25 Steel/stainless Steel/non Ferrous Metals/cast Iron/plastics/wood. For Deburring/edge Dressing/welds/rust Removal/cleaning. High Quality Zirconium Flaps/fast Stock Removal. Long Life, Low Noise And Low Vibration. Max. Speed 80m/s. 8500rpm. Size: 178mm Diameter X 22mm. Available In P60 Grade.

Room Temperature Curing. Very Flexible. Lightly Thixotropic Liquid Pu. Ideal For Large Areas Of Bonding And/or A Long Working Time. Bonds Well To Most Thermoplastics, Including Grp/smc/gre/thermoset Composites/abs/pvc/acrylics/polycarbonates Etc. Light Handling Strength Four Hours.resistance Propertiesimpact - Excellent.size: 200ml.

Hook Kit - 140 314 12the Accessories Are Quickly Secured To Our Perfo Panels With Our Perfolock And May Be Repositioned At Any Time. All Items Are Manufactured From Steel And Are Zinc Plated To Give A Long, Corrosion Resistant Life. The Standard Kits Provide Easy Selection And Ordering For Perfo Accessories. For Custom Layouts Choose From Our Range Of Perfo Accessories. Securely Fastened To Panels In Seconds With Perfolock Clips. Remove Or Reposition As Required. Hook Ends Capped For Safely.

310ml. Ready-to-use, Single-component, Acetoxy Silicone With Fast Cure And Good Weathering Characteristics. Suitable For Use On Aluminium, Glass, Formica, And Most Other Non-porous Substrates. Safe To Use In Contact With Potable Water.product Type:acetoxy Silicone Sealant.sealant Adhesive Volume: 310 Mltotal Product Weight: 0.379 Kgwater-resistant.

Indexing Plunger - Type Ak Steelmaterial: Ak Steel. Blackened. Plunger Hardened.ak-ni Stainless Steel. German Material No.1.4305.plunger Chemically Nickel Plated. Knob Plastic (polyamide Pa). Black - Matt Finish.

Designed To Deliver Both Fluid And Thick Grease At A Constant Controllable Rate From 12.5kg Kegs. Each Mechanical Part Is Factory Inspected To Ensure Perfect Operation Even Under The Most Severe Working Conditions. Supplied With: 280mm Diameter Drum Cover, Pump, 265mm Diameter Follower Plate, 3m High Pressure Hose And Control Valve With Caps Swivel.pump Specification:pump Ratio: 50:1.air Inelt: 1/4ã¢â‚¬ï¿¾ Bsp Female.grease Outlet: 1/4ã¢â‚¬ï¿¾ Bsp Male.grease Delivery At 6bar (90psi): 500g Per Minute (16).tube: 30mm Dia. X 410mm Length.units Also Available To Suit: 25, 50 And 200kg Kegs.

Anti-stick Circuitry For Easy Arc Strike. Complete With Electrode Holder, 3 Metre Cable, 3 Metre Earth Lead And Tough Blow Moulded Carry Case. Light Weight. 2 Year Warranty.