Crawford 10sg (100tg) 18.00mm Super Grip Collet
    Crawford 10sg (100tg) 18.00mm Super Grip Collet.

    The Type 10sg Supergrip Toolholding Collet Is Used For Heavy Milling Where High Concentricity Is Required. The Collet Is Based On A Single Angle Construction And Has A 0.4mm Range Of Collapse.



    Manufacturer: Crawford
    ID: M148-r-18mm
    Category: Spindle Nose , amp, Workholding , gt, Chucks, Collets , amp, Toolposts , gt, Collets
    SKU: Crc1441059k




Hitachi Power Tools Dv20vb2 790w 13mm Impact Drill 110v
    Hitachi Power Tools Dv20vb2 790w 13mm Impact Drill 110v.

    Dv20vb2 Impact Drill Using An Industrial 790w Motor With 13mm Keyless Chuck And High Quality Rohm Keyless Chuck. Features Include Two Speed Gearbox, Two Mode Action - Rotary Or Impact Drilling, Reverse Facility, Sturdy Aluminium Gear Casing For Long Life, Soft Grip Handle And Is Supplied With A Moulded Carrying Case Complete With Accessory Storage Compartment.



    Manufacturer: Hitachi Power Tools
    ID: Dv20vb2
    Category: Power Tools , gt, Corded Power Tools , gt, Drills , amp, Hammers , gt, Impact Drills
    SKU: Hit2740172q




Indexa V90sf Fixed Spindle Vertical Clamp
    Indexa V90sf Fixed Spindle Vertical Clamp.

    Designed To Improve Performance In Fabrication And Engineering Clamping Applications. The Rapid Clamping/unclamping Made Possible By The Use Of Toggle Clamps Can Greatly Reduce Machine/operator 'down-time' During All Stages Of Production.clamping Capacity - The Forces Stated Are The Maximum Loads That Can Be Applied Without Causing Permanent Deformation. Due To Leverage Ratios, The Holding Capacity Will Be Greatest At The Point On The Bar Nearest To The Handle Of The Clamp And Forces Stated Have Been Achieved At This Point.



    Manufacturer: Indexa
    ID: Gh-12055
    Category: Spindle Nose , amp, Workholding , gt, Workholding , gt, Fixturing , gt, Toggle Clamps
    SKU: Ind4431170k




Solent Lubricants Plus Pm175k Sump Emptier
    Solent Lubricants Plus Pm175k Sump Emptier.

    Pm175kwith Stainless Steel Venturi Pump. Screws Into 205 Litre Oil Drums. Uses Compressed Air To Create A Powerful Vacuum. Empties Liquid And Suspended Solids From Tanks And Can Fill A Drum In As Little As 90 Seconds, Making It Ready For Appropriate Disposal. Shuts Off Automatically When Done.



    Manufacturer: Solent Lubricants Plus
    ID: Pm175k
    Category: Lubricants , amp, Chemicals , gt, Metal Cutting Fluids, compounds , amp, Coolants , gt, Coolant System Accessories
    SKU: Sol7408940g




Irwin 10504237 Pro Touch Fixed Utility Knife
    Irwin 10504237 Pro Touch Fixed Utility Knife.

    Pro-touch Utility Knives Pro-touch Ergonomic Grip. Ideal Cutting Angle For Reduced Fatigue. Tool-free Easy Access To Spare Blades. Comes With Six Bi-metal Blue Blades. Inside Storage Clip Holds Five Blades Securely.bi-metal Bladescombines Spring Backing Steel With An Electron Beam Welded High Speed Steel Edge. Spring Backing Steel Offers Flexibility Reducing The Chance Of Shattering For Operator Safety. Heat Treated Hss Cutting Edge Offers Long Blade Life And Edge Sharpness. Lasts Up To Three Times Longer Than Carbon Steel Blades. Bulk Packs 10, 50 And 100 Are Supplied In Dispenser Boxes.



    Manufacturer: Irwin
    ID: 10504237
    Category: Hand Tools , gt, Cutting , amp, Sawing , gt, Knives - Trimming
    SKU: Irw5653020n




Senator 3-drawer Tool Cabinet
    Senator 3-drawer Tool Cabinet.

    3 Drawerdouble Thickness Side Walls With Welded Joints And A Hard Wearing Epoxy Powder Coating. I-beam Draw Slides With Double Sliders On Base Drawer. 100mm Rubber Castors With Brakes Fitted To Two End Castors. Fully Locking. Castors Are Rated To 40kg Capacity Standing Load Per Castor. Drawer Loads Should Be Evenly Distributed. Roller Cabinets Are Not Suitable For Frequent Relocation When Loaded And Should Only Ever Be Pushed.overall Dimensions (w X D X H): 680 X 435 X 660mm.drawer Sizes (w X D X H): 3@ 511 X 403 X 75mm.bottom Compartment (w X D X H): 678 X 425 X 368mm.uses 16" Drawer Slides.



    Manufacturer: Senator
    ID: Tbr2003b
    Category: Storage , amp, Handling , gt, Storage , gt, Tool Storage , gt, Roller Cabinets , amp, Tool Chests
    SKU: Sen5941030k




Smc Cd85n16-50-b Air Cylinder
    Smc Cd85n16-50-b Air Cylinder.

    Double-acting. Built-in Magnets.*non-rotating Rod.series Cd85 Iso



    Manufacturer: Smc
    ID: Cd85n16-50-b
    Category: Fluid Power , gt, Cylinders
    SKU: Sme2942163p




Kennedy Automotive Quick Splicing Set 50-pce
    Kennedy Automotive Quick Splicing Set 50-pce.

    For Fast, Simple And Strong Splicing Of Automotive Electrical Wires. Easy-to-use, No Wire Strippers Or Crimper Required. Maximum Electrical Rating: 600 Volts.maximum Temperature: 105ã‚â°c.terminal Material: Brass.plating: Tin Insulation. Material: Pp.contents:red: 0.5mm2 X 1.0mm2 (25pcs).blue: 1.5mm2 X 2.5mm2 (25pcs).



    Manufacturer: Kennedy
    ID: He020050oc
    Category: Automotive , gt, Tools , gt, Workshop , amp, Roadside Assistance , gt, Specialist Tools
    SKU: Ken5039930k




Kennedy 19.0x19mm Cut 1/4"shk. 2f L Mortising Bit
    Kennedy 19.0x19mm Cut 1/4"shk. 2f L Mortising Bit.

    Two Flute Hinge Mortising Bits Designed With Large Chip Clearance At Base. Suitable For Hinge Recessing And Shallow Flat Bottom Apertures.this Special Design Is Best For Plunging And Mortising Shallow Grooves.



    Manufacturer: Kennedy
    ID: Mb31904
    Category: Power Tools , gt, Consumables , amp, Accessories , gt, Router Cutters
    SKU: Ken2870740k




Kennedy 6"/150mm Coolant-proof Ip 67 Digital Caliper
    Kennedy 6"/150mm Coolant-proof Ip 67 Digital Caliper.

    Available In A Range Of Sizes, This Digital Caliper Is Coolant, Water And Dust Proof To Ip67 Level. It Has A Large Lcd Display, Fast Response Speed, Dual Readout (mm/inch) And Can Be Used For Inside, Outside, Depth And Step Measuring. Also Enables Absolute And Relative Reading.extra Batteries Available - Order Code Edi -904-4000k.



    Manufacturer: Kennedy
    ID: 110-801-30
    Category: Measuring , amp, Test Equipment , gt, Mechanical Gauges , gt, External Micrometers, Clipers , amp, Gauges , gt, Calipers - Digital
    SKU: Ken3311200k




Kennedy Mini-mag Stand
    Kennedy Mini-mag Stand.

    Mini-mag Standwith One Magnetic Face. Light Duty With Standard Clamp, 30mm Diameter Keeper.mounts: 1/4" I/d Lug, Stem/spigot Diameter: 5/16".column Height X Dia.: 120 X 6.3mm.clamp Hole: 8mm.magnetic Pull: 14.75kg.base Dimensions: 30 X 35mm.



    Manufacturer: Kennedy
    ID: E909
    Category: Measuring , amp, Test Equipment , gt, Test Gauges , amp, Accessories , gt, Instrument Stands , gt, Magnetic Stands
    SKU: Ken3332010k




Mitutoyo 2417s Dial Indicator
    Mitutoyo 2417s Dial Indicator.

    Series 2conventional Size, Easy To Read Indicator For General Applications.



    Manufacturer: Mitutoyo
    ID: 2417s
    Category: Measuring , amp, Test Equipment , gt, Test Gauges , amp, Accessories , gt, Dial Gauges , gt, Dial Test Indicators - Plunger Type
    SKU: Mit3253776b




Kennedy 36mm Impact Socket 1/2" Sq Dr
    Kennedy 36mm Impact Socket 1/2" Sq Dr.

    1/2" Drive Metric, Support Length, 6-pointconform To: Din 3129.l = Overall Length Of Socketl2 = Socket Depthd1 Ãƒëœ = Socket End Diameterd2 Ãƒëœ = Drive End Diameter Manufactured From High Quality Chrome Molybdenum Steel. Black Oxidised Finish With Permanent Laser Etched Markings.



    Manufacturer: Kennedy
    ID: 60520036
    Category: Hand Tools , gt, Sockets , impact, , gt, 1, 2, quot, Square Drive , gt, Standard Impact 1, 2, quot, Sd
    SKU: Ken5832250k




Kennedy 12" Coco Broom C/w 15/16" X 48" Stale
    Kennedy 12" Coco Broom C/w 15/16" X 48" Stale.

    Kennedy Brushware Products Are Suiting For All Janitorial Requirements And To Simply Sweep Up. Within The Range Are Slimline Wire Or Nylon Brushes, Wire Scratch Brushes, Twisted Wire Tube Brushes, Mops, Banister Hand Brushes, Complete Brooms And Replacement Broom Heads. Everything You Need To Make A Clean Sweep Of It!



    Manufacturer: Kennedy
    ID: 611.600.120
    Category: Cleaning , amp, Hygiene , gt, Cleaning Hardware , gt, Brooms
    SKU: Ken9071980k




Moldex 8090 Particulate Filter Holders (pr)
    Moldex 8090 Particulate Filter Holders (pr).

    Clips Onto Gas Cartridge And Holds 8060, 8010, 8070, Or 8080 Particulate Filter Pad.



    Manufacturer: Moldex
    ID: 809001
    Category: Personal Protection , amp, Clothing , gt, Respiratory Protection , gt, Reusable , amp, Disposable Respirator Accessories
    SKU: Mdf9593860a




Iscar Dgtl 1616-2 Do-grip Holder
    Iscar Dgtl 1616-2 Do-grip Holder.

    Dgtr/l: Integral Shank Parting And Grooving Tools.



    Manufacturer: Iscar
    ID: 2301253
    Category: Cutting Tools , gt, Parting , amp, Grooving , gt, Inserts , amp, Blades , gt, Parting Blades
    SKU: Ist1311534d




Oxford Compact Push Button 4 Mag Stand
    Oxford Compact Push Button 4 Mag Stand.

    With Four Magnetic Faces, One At 45ã‚â°. Standard Clamp.mounts: 1/4" I/d Lug, Stem/spigot Diameter: 5/16".base Dimensions: 48 X 44 X 51mm.column Height X Dia.: 185 X 12mm.crossbar Length X Dia.: 165 X 6.3mm.clamp Ring: 6.35mm.magnetic Pull: 30kg.



    Manufacturer: Oxford
    ID: Oxd-333-7080k
    Category: Measuring , amp, Test Equipment , gt, Test Gauges , amp, Accessories , gt, Instrument Stands , gt, Magnetic Stands
    SKU: Oxd3337080k




Kennedy Compact Mod System-495x350x445mm-full Length Hdl
    Kennedy Compact Mod System-495x350x445mm-full Length Hdl.

    Lightweight Reinforced Body For Added Strength And Durability. Includes 4 Removable Organisers With Lids And Removable Tote Tray With Handle. With Ergonomic Aluminium Handle And Metal Clasps With Holes For Padlocks. V Groove With Rule Built Into The Lid.



    Manufacturer: Kennedy
    ID: Compact Module System
    Category: Storage , amp, Handling , gt, Storage , gt, Tool Storage , gt, Toolboxes
    SKU: Ken5932810k




Mascot Tondela Black Pilot Jacket - Size M
    Mascot Tondela Black Pilot Jacket - Size M.

    Breathable, Wind And Waterproof. Taped Seams. Detachable Hood With Detachable Faux Fur Trim And Adjustable Drawstring. Lining Of Quilt. Fastening With Zip, Storm Flap And Hidden Press Studs. Zipped Pockets Under Storm Flap. Chest Pockets - One With Flap, One With Zip. D-ring. Front Pockets With Zip. Inner Pockets In Mesh, One Open And One With Zip. Formed Cut Sleeves. Zipped Sleeve Pocket. Imitation Leather On Part Of The Product. Rib (hidden In Storm Flap) And Press Stud Fastening At Cuffs. Elastic At The Sides And Waist. Zip At Lower Back For Logo Printing/ Embroidery. Orange Contrast Stitching. Reflectors. 100% Polyamide.



    Manufacturer: Mascot
    ID: 08135-127-09
    Category: Personal Protection , amp, Clothing , gt, Clothing , amp, Workwear , gt, Coats, Jackets , amp, Fleeces
    SKU: Msc9627251b




Proto J2120 Aligning Pry Bar 18
    Proto J2120 Aligning Pry Bar 18.

    Application: For Prying, Positioning, And Aligning Applications.black Oxide Finish To Help Prevent Rust Corrosion; Extending Tool Life And Performance.



    Manufacturer: Proto
    ID: J2120
    Category: Hand Tools , gt, Building , amp, Construction , gt, Cold Chisels, Wrecking , amp, Pry Bars
    SKU: Pto5821127c




Colop Ptr20/1 Printer Diy Text Stamp
    Colop Ptr20/1 Printer Diy Text Stamp.

    Diyp20/1no Stamp Pad Required. Four Lines Of Text. The Kit Contains: Self-inking Stamp With Ribbed Back Reusable Rubber Type Containing Letters, Numbers And Symbols, Plus A Set Of Tweezers.



    Manufacturer: Colop
    ID: Ptr20/1
    Category: Office Supplies , amp, Stationery , gt, Office Essentials , gt, Stamps , amp, Ink Pads
    SKU: Clp8170003k




Vale Mi4hp British/din Standard Plug Black
    Vale Mi4hp British/din Standard Plug Black.

    Blanking Plug - Black Finishbsptbritish Standard (bs 143)working Pressures And Temperatures: 25 Bar (360 Psi) @ -30ã‚â° To + 120ã‚â°c. 20 Bar (290 Psi) @ -+120ã‚â° To +300ã‚â°c.



    Manufacturer: Vale
    ID: Mi4hp
    Category: Fluid Power , gt, Pneumatic Fittings , gt, Standard Couplings
    SKU: Vle2977410a




Deb Stoko Kresto Citrus 4ltr
    Deb Stoko Kresto Citrus 4ltr.

    Cleanse - Appropriate Hand Cleansers To Meet The Specific Cleaning Needs And Preferences Of Each Workplace Environment.removes A Wide Range Of Ingrained And Difficult To Remove Industrial Soilingsfrom Oil And Grease To Many Paints And Adhesives. Contains Moisturiser To Help Ensure Regular Use Does Not Affect Skin Hydration. For Use With Cleanse Heavy 2000 And 4000 Dispensers. Super Heavy Duty.size: 2ltr And 4ltr.



    Manufacturer: Deb Stoko
    ID: Cit4ltr
    Category: Cleaning , amp, Hygiene , gt, Skin Care And Dispensers , gt, Dispensers , amp, Refills , gt, Hand Wash Dispenser Refills
    SKU: Deb7102652j




Kobe 18v Combi/impact Driver Twin Pack 2 X 2.0ah Li Ion
    Kobe 18v Combi/impact Driver Twin Pack 2 X 2.0ah Li Ion.

    Pack Comes With Carry Case And Includes Charger And 2x 2.0ah Li-ion Batteries. Both Drill And Driver Feature Ergonomic Soft Grip Handles, Built-in Led Light And Bit Holder, And Trigger With Speed Adjustment Feature.box Contents:ã¢â‚¬â¢ 18v Li-ion Combi Drillã¢â‚¬â¢ 18v Li-ion Impact Driverã¢â‚¬â¢ 2x 2.0ah Li-ion Batteriesã¢â‚¬â¢ 2.0ah Li-ion Battery Charger With Battery Power Indicator Lightsã¢â‚¬â¢ Carry Case With Shoulder Strapboth Combi Drill & Impact Driver Feature:ã¢â‚¬â¢ Ergonomic Soft Grip Handleã¢â‚¬â¢ Built-in Led Lightã¢â‚¬â¢ Built-in Bit Holderã¢â‚¬â¢ Forward And Reverse Switchã¢â‚¬â¢ Belt Clip Holderã¢â‚¬â¢ 60 Minute Charging Timeã¢â‚¬â¢ Trigger With Speed Adjustment Featurecombi Drill Features:ã¢â‚¬â¢ 13mm Single Sleeve Keyless Chuckã¢â‚¬â¢ Automatic Spindle Lock Functionã¢â‚¬â¢ Impact Functio Nã¢â‚¬â¢ 2-speed Gear Selectionã¢â‚¬â¢ Torque Adjustment Ringã¢â‚¬â¢ Function Ring To Switch Between Driving, Drilling And Drilling With Impactimpact Driver Features:ã¢â‚¬â¢ 1/4" Collet Sizeã¢â‚¬â¢ Quick Release Chuckã¢â‚¬â¢ Max. Torque 150nm



    Manufacturer: Kobe
    ID: Crkbe2792300k
    Category: Power Tools , gt, Cordless Power Tools , gt, Cordless Twin Packs , amp, Combi Packs
    SKU: Kbe2792300k




Swisstech M3x0.5 Green Sp/fl 371 Hss-ev Nit Tap
    Swisstech M3x0.5 Green Sp/fl 371 Hss-ev Nit Tap.

    Pro Series - Green Ring - Spiral Flute - Iso Metric Coarse - Nitridemanufactured To Din 371/376 Suitable For The Following Material Groupsspiral Flute - Hss-ev Nitride Finishfor Blind Holes. Taper Lead To Din Form C (2 X P To 3 X P). Tapping Tolerance To 6h.



    Manufacturer: Swisstech
    ID: Crpro1857009g
    Category: Cutting Tools , gt, Threading , gt, Taps - Production , gt, Hss-ev Production Taps
    SKU: Pro1857009g






Brake | Steering | Auto | Ignition | Belts | Engine | Fuel | Vehicle

Copyright © 2024 MotorHolder.com All rights reserved.
With any using link to MotorHolder.com strongly required.