Vivid Opaque Water Based Poster Paint. Highly Opaque Pigment Ink With Superior Water And Fade Resistant Performance Suitable For Use On Card, Metal, Plastic, Glass/porcelain, Wood/crates, Rubber, Stone, Etc. Ideal For Posters, Menu Boards And Sign Writing. Besides, It Allows Over-painting Without Bleed-through. Easily Washes Off Non-porous Surfaces. Acid & Xylene Free.writing Width: 2mm.acrylic Fibre Tip.water And Fade Resistant.bullet Style.available In 19 Colours.box Of 12 Pieces.

Mw192-20dmeasuring Range: 0 - 6"/0 - 150mm. Accurac: 0.0015".reading: Inch/metric/fractional.

Carbide Straight Shank Stub Drills Metricfor Drilling Into Steel, Cast Steel, Cast Iron, Chilled Cast Iron, Malleable Cast Iron, Non-ferrous Materials And Abrasive Plastic. Point Angle: 118ã‚â°, Helix Angle: 30ã‚â°, Tolerance Of Diameter: H7, Tolerance Of Shank: H6.manufactured To Works Standard.

Designed For General Use And Best Suited To Softer Materials Such As Wood, Plastics, Fillers, Leather And Lead.

Cordless Die Grinder Powered By 18v Li-ion Batteries Featuring The Same Easy-to-grip Slim Motor Housing As Used For Makita Angle Grinders. This Model Has The Long Nose.ã¢â‚¬â¢ Ergonomically Designed, Easy To Grip, Slim Body For Grinding In Tight Spotsã¢â‚¬â¢ Internal Labyrinth Construction Seals Motor And Bearings From Contaminationã¢â‚¬â¢ Torque Limiterã¢â‚¬â¢ Anti-restart Function With Warning Lamp - The Motor Doesn't Start If The Battery Is Inserted While The Switch Is Locked Onã¢â‚¬â¢ Easily Accessible Carbon Brushã¢â‚¬â¢ Round Collet Nut Reduces The Risk Of Scratches And Damages To Workpiecebatteries Or Charger Are Not Includedmachine Compatible With Makita Bl1830 And Bl1840 And Bl1850 Batteriesmax. Wheel Diameter 36mmmax. Mandrel (shank) Diameter 6.35mmmax. Mandrel (shank) Length 44mmcharging Time: 22min.

The Bi-metal Fast Cut Holesaws Combine A New Tooth Material, With Enhanced Heat And Wear Resistance, And A New Tooth Design, Providing A Smoother, Faster Cut On A Wide Range Of Materials, When Compared Against The Previous Constant Pitch Saw. Specifically Suited To Cutting Stainless And Mild Steel Sheet, The Fast Cut Will Also Cut Through Tubes With A Wall Thickness Of Up To 3mm (1/8").

2 Piece Setstwo Piece Sets For Drilling Through Glass, Tiles, Mirrors And Ceramics. Set What Is Contained: 1x Masonry Drill Bit And 1x Tile And Glass Drill Bit.

Using An Energy Saving 38w 2d Fluorescent Bulb That Generates The Same Light As Halogen But Using Far Less Energy. Tough Poly-carbonate Case And Virtually Shatterproof Lens. Supplied With 3m Rubberised Mains Lead. Ideal For All Trades. Ip44 Rated. For Use Indoor Or Outdoor.

60ã‚â° Inclusive Angle. Manufactured To Bs 328 : Part 2 : 1986, Din 333a, Iso 866, Iso 2540, Iso 2541.sizes: Bs1, Bs2, Bs3, Bs4 And Bs5.

This Push-on Gauge Is Suitable For Cars, Vans And Light Commercials, Where Readings Of Up To 120psi Are Necessary. It Is Of Chrome Plated Brass Contruction With A Pen Type Pocket Clip.

Wypall X70 8383 The Patented Brag Dispensing Box, Is A Portable Dispensing System With Large Capacity For Dispensing X70 High Perform Wipes That Are Fast Absorbing. They Are Ultra Absorbent And Durable For Quickly And Efficiently Wiping Away Oil, Grease, Grime And Solvents. Ideal For Keeping Tools And Machinery Clean. Sheet Colour: White. Sheet Size: 42 X 31cm. Sheets Per Box: 150.

Set Of 4 Engineer's Files Fitted With Ergonomically Designed Handles For A Comfortable Improved Grip. Files Manufactured From T12 Carbon Tool Steel, Hardened And Tempered. Supplied In A Woven Wallet For Easy Storage.set Contains Hand, Flat, Round And Half Round Second Engineer's Filesmanufactured To Bs498:1990 And American Federal Standard Ggg-f325b.sets Available In 6" (150mm), 8" (200mm) And 10" (250mm) Versions.

Professional Belt Drive. Two Year Warranty On All Protech Compressors.this Range Uses Extra Hard Wearing Slow Running Pumps With Aftercoolers To Provide Resistance To Wear And Long Lasting Reliability. An Oversized Crankcase Further Improves Lubrication. These Machines Are Ideal For Heavy, Continuous Use - The Right Choice For Professional And Industrial Applications.slow Running.strong Plastic Belt Guard.big Wheels - For Better Mobility Around The Workshop.

Cnmp Turning Inserts80ã‚â° Rhombic Insertinsert Grade Kc850(m25-m45)(p25-p45). A Tri-phase Coating On An Extra Strong, Cobalt-enriched Substrate. For Heavy Cutting Of Low,medium, And High Carbon Steels, As Well As Medium Hardness Alloy And Tool Steels. Excellent Thermal And Mechanical Shock Rdsistance Makes This Grade Ideally Suited For Difficult Interrupted Cuts.

Series 91 - Weldon Shank - 7 Piece Setcentre Cutting. To Manufacturers Standards. Weldon Shank To Din 1835b. Shank Diameter To H6. Dimensions To Din 844. Contents: 3, 4, 5, 6, 8, 10 And 12mm.the Latest Enhancement Of The Swisstech Range, These Cutters Deliver Excellent Performance When Cutting Difficult Materials, Even At High Speeds.manufactured From Premium Pm (powder Metallurgy) Tool Steel, With An Excellent Cutting Geometry. Designed For Strength And Rigidity, Minimising Vibration In High Speed Cutting Applications And Providing Improved Productivity.these Cutters Are Further Enhanced By The Swisstech Peak Power Coating, Suiting Dry Cutting Applications, Having Higher Oxidization Resistance And Hot-hardness Than Conventional Tialn Or Ticn Coatings, Withstanding The High Thermal Loads Associated With High Speed Cutting Applications.

M18 Set2-h-503wprofessional 18v Lithium-ion Thunderbolt Kit Complete With 115mm Angel Grinder, Compact Percussion Drill, Tool Box, Charger And 3x 5.0ah Red Lithium-ion Battery Packs For Higher Performance.m18cagxpdb115 115mm Angle Grinderbrushless Powerstate Motor. Rapidstop For Fastest Disc Brake In Less Than 2 Seconds. Non-lockable Safety Paddle Switch. Premium Gearing System. No Load Speed: 8500rpm. Wheel Diameter: 115mm. M18fpd Compact Percussion Drillbrushless Powerstate Motor. Flexible Battery System: Works With All Milwaukee M18 Batteries.max. Torque: 135nm Impact Rate: 0 - 32,000bpm No Load Speed: 0 - 550 / 0 - 2,000rpm Max. Drilling Capacities: Steel 16mm, Wood 65mm, Masonry 13mm.

General Purpose Foil Productresists Flame, Moisture And Weather Ideal For Indoor And Outdoor Long Term Applications

With Compound Action And Self-opening Jaws, This 5-blade Pipe Crimper Provides Accurate Indentations In Round Duct And Stove Pipe. It Has Soft Grip Handles For Comfort And Rust Resistant Blades.

Work Best On Holes As Small As 1.5mm Diametermade Of H.s.s. Hardness 62-64rcincl. Angle 45 Degpack Weight 27 Grpack Quantity 10 Piecesfor Right Hand Users

With Hinged Link Permitting Operation At Varying Angles.

Dm664extra Large Digits, Temperature Probe And Short Lead Capacitor Adaptor. Features Include Continuity, Diode, Transistor Hfe, Auto Power Off, Overload Indication, Low Battery Indicator, Tilt Stand/hanger.voltage Max: 700v Ac, 1000v Dc.current Max: 10a Ac/dc.resistance Max: 200mw.capacitance Max: 2mf.frequency Max: 20khz.temp Max: -20 To 1000ã‚â°c.safety Rating: Cat Iii 600v, Cat Ii 1000v.warranty: 1 Year.

Iso 3315 - Din 3122 - Iso 1174-1.72 Tooth Mechanism.5ã‚â° Increment.angled Handle For Easy Access.long Handle For Stronger Untightening.socket Safety Lock.reversing Lever: Rotation Direction Indication.high Chrome Finish.ergonomic Bimaterial Handle.

For Drilling Into General Steel, Cast Steel, Cast Iron, Chilled Cast Iron, Malleable Cast Iron, Non-ferrous Heavy And Light Metal, And Abrasive Plastic. Self-centering. Point Angle: 140. Tolerance Of Diameter: M7. Tolerance Of Shank: H6. Manufactured To Din 6537. Metric Sizes Up To 20mm And Inch Sizes Available On Request.fire Coating:applied In Guhrings Own Coating Plants Using He Pvd Process. Akl Round Coating Can Achieve Two To Three Times The Performance Of Tin, And Considerably Better Than Tialn. Has Excellent Heat Resistance As Well As High Toughness, Therefore It Is Well-suited For Interrupted Cutting.

Designed With Point And Flute Geometry Specifically For Drilling Cast And Nodular Irons. The Thick Web And Narrow Flute Means Thedrill Is Rigid And Will Produce Accurate Size Holes Consistently. The Carbide Grade Used Is Particularly Resistant To Abrasive Wear Which Is Important When Cutting Cast Irons And Provides For Extremely Long Tool Life.cutting Diameter\t Tolerance (mm)over\t Up To\t\t-0mm\t 3mm\t0\t-0.0103mm\t 6mm\t0\t-0.0126mm\t10mm\t0\t-0.01510mm\t16mm\t0\t-0.018fc-ddsm (recommended For 4 X D)

Earth Hour Position : 6fitted With Cable Entry Glandbs En60309red