Diameter Range: 46.99 To 65.28mm.for All Dimensional Specifications Please Refer To Our Catalogue.

95ã‚â° Approach For Negative 80ã‚â° Trigon Inserts.

Waterproof Upper With W-tex Lining. 200 Joules Steel Toe Cap Impact Protection. Guards Against Falling Objects And Collisions. Steel Midsole To Prevent Sharp Object Penetration. Ideally Suited To Building Sites And Where Metal Swarf Is Present On Floors. Resists The Build-up And Conductance Of Static Electricity. Of Most Benefit When Walking On Synthetic Carpets Or Near Electrical Machinery. Dual Density Polyurethane/rubber Soles For Extra Comfort. The Sole Features A Nitrile Rubber Outsole, Resistant To Heat To 300ã‚â° And A Low Density Polyurethane Interlayer, For Increased Comfort And Shock Absorption. Water Penetration And Absorption Resistant. Helps Keep Feet Dry In Wet Conditions.s3 Classified.manufactured To En Iso 20345:2011.

Fc22 - Spacerfor Use With Jig Components For Increasing Height Or Extending Length.material: Medium Carbon Steel.hardness: Hrc 40.

Dcmt Turning Inserts 55ã‚â° Rhombic Insert7ã‚â° Positive Flank Inserts Used For Semi-finishing And Finish Turning. Chip Breaking In Moderate Feed Range. Positive Rake, Low Cutting Forces. Used For A Wide Range Of Materials Insert Grade Ic30niso Range - (p10-p30)(m10-m20)coating - Uncoated Uncoated Grade For Semifinishing And Finishing

Metriccan Be Used At Angles Up To 30ã‚â° From The Screw Head, Making Them Ideal For Awkward Ac Cess Areas. Hardened Carbon Steel With Fluted Handles.

3x 16amp 110v Sockets. Tough Water Resistant Housing, Ideal For On Site Use.

D-321rair Curing Dry Lubricant. For Metal/metal Combinations With Slow To Medium Fast Movements And High Loads. Suitable For The Permanent Lubrication Of Highly Stressed Sliding Guides With Low Sliding Speeds, Oscillating Movements Or Intermittent Operation. Improves The Running-in Process And For The Lubrication Under High Vacuum And At Extreme Temperatures.size: 400ml.

100% Oil Free - Leaves No Stains On Wood Or Other Porous Surfaces. Versatile - Available In A Choice Of Seven Grades For Industrial, Household, Garden And Trade Use. For Woodwork And Preparation Of Polished Surfaces Between Coats Use The Wire Wool Dry. For Removing Paint Spots - Use With A White Spirit, Turpentine Or Liquid Paint Remover. Always Wear Gloves. For Household Work - Use With Soap And Water As Required. Suitable For Use With Metallic Pots And Pans. 450gm (1lb) Per Pack.

Polyco's Double-layered Cotton Hot Glove With Nitrile Grip Coating Is Heat Resistant To 250ã‚â°c. The Double-layered Cotton Glove Provides Extra Heat Protection And Durability And When Coupled With A Nitrile Grip Pattern Offers Good Grip For Safer Handling. The Generous Fit Allows The Gloves To Be Easily Taken On And Off.conforms To En388 1232 & En407 X34xxx.cat Ii

Ratchet Handledisc Type Adjustment With Knurled Grip And Spring Loaded Ball Bearing Socket Retainer.spark-resistant Tools Are Used To Eliminate The Chances Of Accidental Fires Or Explosions In Potentially Combustible Or Explosive Environments. They Resist The Sparks That A Standard Tool Could Potentially Create When Striking Hard Surfaces. The Use Of Spark Resistant Tools Is Essential In Many Industrial Applications Such As Petroleum And Chemical Manufacturing, Spray Booth Operations, The Marine Industry, The Mining Industry, The Paper Industries, Or Any Location Where Flammable Vapours Or Combustible Residues Are Present. Beryllium Copper Are Manufactured To 30-10hrc And Offer A Breaking Strain Of 1117 N/m - 1236 N/m. Spark-resistant Tools Must Be Maintained With Special Care. Frequent Cleaning/re-dressing To Remove Ferrous Particles Or Contaminants, Which May Impair The Spark Resistant Properties, Is Essential.

3m Peltor Optimeoptime I: Versatile Protection And Lightweight For High Wearer Comfort. Snr = 26db.

Classic T-shirt - Uc301unisexreactive Dyedcrew Necktaped Shoulder To Shouldertwin Needle Stitching On Neck & Shouldersfabric: 100% Cotton 180 Gsm

Large Hard Cup That Supports And Holds The Pps Large Flexible Liner, Part Number 16023.

B30 V Belt By Dunlopthe Classical Wrapped Dunlop V-belt Is A Temperature And Oil Resistant Universal Drive Belt That Has Antistatic Properties With Good Power Transmission Capabilities. It Is Suitable For Both Industrial Machinery And Agricultural Equipment.construction And Featuresthe Tensile Member Consists Of A Specially Treated High Strength Polyester Cord To Transmit Tensile Forces And Withstand Shock Loads.the Fabric Jacket Provides Grip And Protection Against External Agents And Resistance To Abrasion.the Belt Compound Converts Tensile Forces On The Sidewalls Into Longitudinal Forces In The Tensile Member.standardsconform To 1s04184, D1n2215 And Bs3790, They Meet 1s01813 For Static Conductivity And Have An Operating Temperature Range Of -30ã‚â°c - +60ã‚â°c.dimension17mm Top Width X 11mm Deepoutside Length: 827mmpitch Length: 805mminside Length: 762mmbrand: Dunlop

Full S3 Protection At An Affordable Price. S3 Rigger Boot Complete With Protective Scuff Cap, Steel Toecap And Midsole With Side Tabs For Easy Donning. Fur Lined For Extra Warmth And Comfort.200 Joule Steel Toe Cap.pierce Resistant Steel Midsole.antistatic Footwear.energy Absorption Of Seat Region.slip Resistant Outsole.oil Resistant Outsole.dual Density Sole Unit.cold Insulation.

Extended Swivel Elbowsseries 7526these New Models Have Been Released In Technopolymer, Maintaining The Same Technical Characteristics As The Existing Camozzi Fittings Range. Lightweight, Adaptable And They Allow For Easy Maintenance Of The Collet And The Internal Seal. All Materials, Except For The Internal Seal, Can Easily Be Recycled.general Datatube External Diameters: 4, 6, 8, 10, 12 And 16 Mm.connections: G 1/8, G 1/4, G 3/8, G 1/2, G 3/4, M5 And M7.material Body: Technopolymer; Insert: Brass, Collet: Nickel-plated Brass; Seals: Nbr.threads: Gas Cylindrical Iso-228 (bsp). Operating Pressure: Min. 0.9 Bar, Max. 16 Bar.tube To Connect: Rilsan, Polyamide 6 - 11 - 12, Polyethylene, Pu.fluid: Compressed Air (for Other Types Of Fluid, Contact Our Engineers).temperature: -20ã‚â°c (see Data For Tubing Used).

Manufactured From Heavy Duty Polyester/cotton With A Teflon Finish And Reinforced Stress Points. Warm Quilted Lining For Cold Weather Comfort.

Desktop Unit With 6 Compartments To Store. Fastfold Automatic Assembly Outer Shell To Simplify Construction. An Ideal Way To Store Your A4 And Foolscap Lever Arch Files, Ring Binders, System 80mm Transfer Files And Magazine Files.can Be Stacked Up To 3 Units High To Save You Space. Made From Fsc Certified 100% Recycled Board, 100% Recyclable.dimensions W580 X H400 X D290mmfiles Not Included.

â€⢠Unique Biopolymer Palm Coating On A Cut Protection Blended Fibre Linerã¢â‚¬â¢ A Supple And Light Glove With Excellent Grip In Wet And Dry Environmentsã¢â‚¬â¢ Treated With Actifresh To Kill Bacteria And Promote Freshnessã¢â‚¬â¢ Breathable Back Of The Hand To Reduce Perspiration And Skin Irritationã¢â‚¬â¢ Elasticated Wrist Provides A Secure Fitã¢â‚¬â¢ Silicone Freeen388 4432cat Iiceadd Actifresh Icon

Short Bladed Light Duty Snips Used By Jewellers, Silversmiths And Model Makers.

Small Diameter, Short Solid Carbide Un Profile Threading Mills. High Cutting Speeds, Short Cycle Time, Low Cutting Forces Due To The Short Threading Contact Resulting In Accurate And Parallel Thread.

The Leo Is Suitable For Most Industrial Applications. Typical Applications Include Construction, Engineering, Mechanics, Local Authorities And Manufacturing. The Overcap Makes It Perfect For Jobs That Involve Kneeling Or Increased Abrasion To The Toe Area. Available In Sizes 3-13

09374 Machine Usable Swirl/scratch Remover Cutting Compound Intended For The Professional Car Polish Scratch Remover System.fast, Effective Action.achieves A Fine, High Gloss Finish.1kg Bottle.

The 29991 Is A Static Mixer For Use With Devcon Two Component Products In Cartridges.