We Understand Saab Owners Want To Get As Much Performance Out Of Their Cars As Possible And Upgrading The Suspension To Koni Sport Struts And Shocks With H&r Lowering Springs (estimated Lowering Amount Of 1.4 Inches In The Front And 1.3 Inches In The Rear) Will Improve The Handling Of The Vehicle While Also Lowering Its Center Of Gravity. The Result Is A Vehicle With Improved Suspension Dampening Less Body Roll And Shorter Braking Distances. Konis Sport Struts Are Rebound Adjustable Using An External Knob At The Top Of The Strut. They Are Perfect For Use On The Street Or Track With H&r Lowering Springs. Replacing Front Struts Can Be A Simple Diy Job But It Also Requires Specialized Tools And Training To Compress The Coil Spring. At Eeuroparts We Have Compiled A List Of Parts To Assemble The Front Struts For You. With The Difficult Part Completed You Can Simply Bolt On Your New Strut Kit. *a 4-wheel Alignment Is Required After Installation*

Distributor Cap - Saab: 99 (all) 900 79-93(+94 Conv) All Engines 9000 86-89 All Engines. Volvo: Ignition Distributor Cap For Any 76-93 240 Model(turbo And Non/turbo) 760t 83-84 940 Non-turbo Regina Mid 93-95. Covers The Distributor And Its Internal Rotor. Cap Eventually Succumbs To Heat And Vibration But It Very Easy And Inexpensive To Replace. Original Bosch

2-bolt Connection. Front Right/passenger Side Lower Control Arm With Ball Joint For Mid 94-97 850 (4dr From Ch. # 131537 5dr From Ch. # 37528) And S/v70 Non/turbo 98-00.

Touch Up Paint Bottle For Color Code (267) (dakar Yellow). Color Code Can Be Found On A Seperate Sticker Under The Hood. The Sticker Will Be Labeled With The Paint Color (in German) With The 3 Digit Color Code Below It.

1.25 Amp Battery Charger/trickle Charger With Integrated Btp Micro Chip Designed To Reach And Maintain Proper Charge Allowing Safe Storage Of Any Lead Acid Battery. Features Include Temperature Compensation And Reverse Polarity Protection Powder Coated Aluminum Chassis.

Universal Three-wire O2 Sensor Can Be Spliced In As A Substitute For Any Bosch Narrow-band 3-wire Sensor. Includes 22 Of Wire And Water Proof Connector.

These Hoses Are Entirely Manufactured In High Quality Silicone For Best Finish And Durability. With Three To Five Layers Of Armory Depending Of The Inner Diameter The Hoses Withstand High Pressure Rates And High Temperatures For A Long Time. The Original Hoses Are Manufactured In Rubber That Not Seldom Cracks From Age. This Is The Durable Solution For You That In Addition Improves The Looks!

This Tool Set Is Used To Remove And Install The Front Crankshaft Seal. For N54 Engines This Tool Will Be Used To Install A New Seal. To Remove The Front Crank Seal On An N54 Engine Use 110370.

This Plate Was Designed For Our Balance Shaft Removal Kit To Block The Balance Shaft Chain Tensioner Oil Galley.

Latest Style Ball Pivot For Clutch Fork. Located At Top Of Clutch Bell Housing. Very Early Production 78 Cars May Require Drilling And Tapping To Accommodate The Larger Thread Diameter. Use With Pivot Bushing # 92811614503

Valved Motor From The Oe Exhaust Is Requiredtransform Your Vehicles Style Performance And Sound By Installing A Milltek Sport Exhaust Kit. Made From 3.00 Anti-magnetic T-304 Stainless Steel An Exhaust System Upgrade Provides Sharper Throttle Response Improved Exhaust Gas Flow Through The Use Of Mandrel Bends Increased Power By Utilizing Larger Diameter Tubing And Substantial Weight Savings Over The Stoc Exhaust. Stainless Steel Construction Prevents It From Corroding Inside And Out. Most Kits Are Offered In A Resonated Or Non-resonated Version With Non-resonated Versions Having A Louder And More Aggressive Exhaust Tone. Includes Quad 100mm Polished Gt Style Exhaust Tips.

A/c Line (connects Condenser To Rear Evaporater Line) For Any 91-92 240.

A/t Pump Front O-ring For Any 85-90 740 Non-turbo With Zf4hp22 Transmission.

L Shaped. Inlet To Additional Thermostat Heater Hose.

Lh Side Of Heater Core To Heater Valve Hose. 1 Per Car.

Glove Box Handle Located On The Outside Of The Glove Box Door.

Hex Bolt For Catalytic Converter On E36 And E46 Models. M8x45

Course Thread Torx Head Screw Used On The Blower Motor Housing Box. 4 Per Car.

Sway Bar Link Bushing For Any 86-98 9000 Model. 4 Per Car.

Compressor - Reciever/drier A/c Hose For Any 93-97 850 S/v 70 98-00 C70 98-00.

Hydraulic Lift Cylinder For Convertible Top. Bow 1.

Oem Mass Airflow Sensor For V8 Audi Q7 Volkswagen Phaeton Toureg. Also Fits 2 Liter Vw 4cyl Cars.

Rectangular Shaped Hood Seals Near Hinges. For 08+ 9-3. 2 Per Car

Crankcase Ventilation Oil Trap From Chassis # 240000

Subframe Bolt For Center Subframe Mounting To Chassis. 2 Per Car.