|
|
Engine Water Pump O-ring (large) - Hepu 9146614 Saab 30551915.
Water Pump O-ring For The Larger End (water Pump Side) Of The Short Coolant Pipe Which Connects The Water Pump Housing To The Engine Block. Saab Oe. 1 Per Car.
Manufacturer: Hepu
ID: 9146614
Category: Cooling Systems
SKU: 6235
|
|
|
A/c Compressor (new) - Sanden 2007846 Volvo 8601550.
New A/c Compressor For Any 94-mid 94(sedan Up To Chassis#42231 Wagon Up To #16671) 960. Genuine Volvo Sanden Unit.
Manufacturer: Sanden
ID: 2007846
Category: A, c , amp, Heating
SKU: 7575
|
|
|
Bolt - Genuine Saab 8125213.
Cylinder Head Bearing Cap Retainer Bolt For Any 900 2.0l 16v 85-93 & 94 Convertible 9000 2.0l All 2.3l 90-93. 12 Per Car.
Manufacturer: Genuine Saab
ID: 8125213
Category: Other
SKU: 33186
|
|
|
Bmw Suspension Kit - Front (e39) - Eeuroparts.com Kit.
This Front End Suspension Kit Includes Upper And Lower Control Arms And Both Tie Rod Assemblies Made By Karlyn.
Manufacturer: Eeuroparts.com Kit
Category: Front Suspension
SKU: 48245
|
|
|
Exhaust System Kit (cat-back) (performance) - Mototec Mtebm320 Bmw.
Made From T304 Stainless Steel This Kit Includes Dual 2 Tubing Which Collects Into A Single 2.75 Tube Leading To The Muffler And Exhaust Exits Out Of Two 2.75 Round Tips. This Kit Will Increase The Sound And Performance Of Your Exhaust System By Eliminating The Muffler Baffles And Using A Center Perforated Tube To Absorb Exhaust Noise And Reduce Back Pressure. This System Offers A Deep Sound Under Acceleration And A Softer Tone While Cruising. Made In Sweden.
Manufacturer: Mototec
ID: Mtebm320
Category: Exhaust System
SKU: 80996
|
|
|
Volvo Exhaust System Kit (cat-back) (performance) (stainless Steel).
Stainless Steel 2 Inch Tubing Cat-back Exhaust System Kit With 4 Inch Oval Tail Pipe From Swedish Car Parts. This Kit Will Increase The Sound And Performance Of Your Exhaust System By Eliminating The Front Muffler And Rear Muffler Baffles Which Helps To Reduce Back Pressure. Hardware And Clamps Included.
Manufacturer: Swedish Parts
ID: 8684279kitss
Category: Exhaust System
SKU: 88483
|
|
|
Engine Air Intake Kit (performance) (carbon Fiber) - Dinan D7600032 Bmw.
The Dinan High Flow Air Intake Kit Serves Two Unique Purposes. Two Additional Air Inlets Are Added Which Include Two High Flow Air Filters. The Factory Air Intake Remains Intact Which Means There Are Four Intakes Leading To The Engine. Since There Is Limited Room In The Engine Compartment Dinan Has Engineered A Strut Brace Into Their Intake Kit To Provide Support To The Strut Towers During Cornering. Estimated Power Gains Of +10hp And +8lb-ft Of Torque With Software Upgrade.
Manufacturer: Dinan
ID: D7600032
Category: Other
SKU: 164169
|
|
|