Drivers Side Front Brake Rotor Protection Plate For Any 850 Mid 94 (sedan From Chassis # 131537 Wagon From Chassis # 37528) -97 (not For T-5r Models) S/v 70 98-00 All C70 98-04.

Cabin Temp Sensor For Any Mid 94 (sedan From Chassis# 131296 On Wagon From Chassis# 37364 On)-97 850 With Ecc(electronic Climate Control) S/v 70 98-00 With Ecc C70 98-04 With Ecc 740/940/960 91-95 With Ecc.

Set Of Control Arms. This Is A Genuine Bmw Service Kit. Includes Control Arms Control Arm Bushings And Hardware.

Set Contains: (1) 11121721475 Spark Plug Hole Seal (3) 11121721476 Spark Plug Hole Seals (1) 11121721876 Valve Cover Gasket And (14) 11121721879 Valve Cover Bolt Seals.

Electronic Stability Program Control. Chassis: 163154/06h 163157/06h 163172/06h 163174/06h 163175/06h. Requires Dealer Programming After Installation.

Threaded Junction Between Fuel Line And Fuel Filter. Male/male. Also Used To Connect Power Steering Pressure Line To Pump In Volvo 240 And 260 Series Cars.

Kit Includes 20 M14x1.5x82mm Studs And 20 M14x1.5 Titan Extended Conical Lug Nuts Along With Blue Thread Locker. This Is A Complete Kit To Retrofit Your Vehicle From Wheel Bolts To Wheel Studs. This Conversion Kit Is Needed When Using Wheel Spacers And It Makes Wheel Installation Easier. A Perfect Upgrade For Daily Driven And Track Cars. Because The Titan Lug Nuts Tend To Be Used More On Show Vehicles We Have Included A Protective 17mm Lug Nut Socket Which Will Prevent Marring Of The Wheel During Removal And Installation. Exercise Caution When Selecting Lug Taper And Size Due To The Variety Of Factory And Aftermarket Wheel Options. The Lug Nut Type Must Be Matched To The Wheel.

The Genuine Bmw Coolant Inlet Tube 11537558529 Is Only Sold As An Assembly And Requires The Removal Of Multiple Exhaust Components To Replace. Because Of This Rein Has Engineered A Hose To Replace Only The Rubber Hose On The Coolant Tube Which Will Save Time And Money During Service. Since The Rubber Portion Is The Main Area Of Failure This Kit Allows The Hose To Be Repla Ced The Same Time As The Water Pump For Preventative Maintenance. Includes Hose Clamps.

The Dinan Performance Springs Lower The Vehicle For Improved Suspension Geometry And Better Control Over Body Roll. The Dinan Springs Are Cnc Wound With High Tensile Chrome Silicon Wire And Shot Peened For Stress Relief. The Stiffer Springs Will Reduce Rear Suspension Compression On Acceleration And Reduce Front Suspension Compression Under Braking. Reduced Body Roll Allows For More Responsive Steering And Driver Input. Compatible With Edc Shocks. The Spring Set Lowers The Vehicle 7/8 In The Front And 3/4 In The Rear.

The Dinan Free Flow Exhaust Is An Axle Back System Made From 16 Gauge 304 Stainless Steel. A Helmholtx Chamber Is Used To Reduce Drone At Low Rpm While The Reduction In Back Pressure Allows For Increased Power. This Exhaust Has Been Designed To Use The Factory Mounting Brackets And Hangers And Has Twin 89mm Stainless Steel Exhaust Tips. The Factory Computer-controlled Exhaust Valve Is Eliminated With This Kit. Expected Power Gains Of 6hp @ 6600 Rpm And 5lb-ft Of Torque @ 6600 Rpm.

Upper Radiator Hose For Any 84-91 740/760/780/940 Turbo.

Rear Muffler Hanger For Any Ng 900 94-98(any Engine) 9-3 All. 3 Per Car. Saab Quality Starla

(3x938) A/c Belt For 93 Model 240s Only. Volvo Quality Continental.

Power Steering Pump Pulley For Any 95-97 960 S/v 90 All.

Negative (ground) Battery Cable For Any 89-93(and 94 Conv) 900.

Auxiliary Fan (engine Cooling Fan) Control Unit. Use With 30 Amp Fuse.

Push In Fastener For Under-hood Insulation Pad 94-98 900 90-93 9000 98-03 9-3.

This Is Also Used To Mount The Power Steering Pump.

Premium Front Strut Bearing Assembly With Oes Bearing

Aftermarket Ceramic Replacement Front Brake Pad Set.

Genuine Audi Front Brake Pad Set For Audi A4 And A6

Rear Mud Flap Kit For Xc90 03-14 After Chassis 328000-

Headlight Assembly For Xenon Equipped Cars With Alh

Vacuum Fitting On The Intake Manifold. Add One O-ring 9137993 To Make Complete.

For Models Without Amg Ceramic Brake System (b07).