Differential O-ring (passenger Side) For Any 900 94-98 5spd 9000 94-98 5spd 9-3 99-02 & 03 Convertible 5spd (not Viggen). 1 Per Car.

Heater/blower Motor Resistor For Cars With Manual Climate Control (without Automatic Climate Control). 1 Per Car.

Passenger Side Headlight Moulding For Any 94-97 850 (94 With Dual Bulb Headlights Alt 2) And Headlight Wipers.

Direct Ignition Cassette For Any 99-03 9-5 V-6. These Cassettes Are Sold Each So If You Are Replacing Both Cassettes You Should Purchase Two (2).

Touch Up Paint Bottle For Color Code (307) (dark Green). Color Code Can Be Found On A Seperate Sticker Under The Hood. The Sticker Will Be Labeled With The Paint Color (in German) With The 3 Digit Color Code Below It.

Headlight Switch Socket Assembly For Any 900 79-98 All 9000 All 9-3 99-02 & 03 Convertible All. 1 Per Car.

Kit Includes Our Lightened Flywheel That Accepts Only Late Pressure Plate Pattern (1990+ Turbo) As Well As The 228mm Upgraded Clutch Kit (pressure Plate Clutch Disc And Release Bearing) That Came Standard On 2l 9000 Turbos. Core Charge Is For The Flywheel.

Saab Rear Brake Hose (body To Rear Caliper) For Any Mid 99 (from Vin# X3025752) And On 9-5 Model. 2 Per Car.

As With Our Standard Coil Spring And Strut Assembly Kits We Also Offer This Performance Kit For Saab 9-5 Models. We Understand Saab Owners Want To Get As Much Performance Out Of Their Cars As Possible And Upgrading The Suspension To Koni Fsd Struts And Shocks With Suplex Oe 9-5 Sport Springs Will Improve The Handling Of The Vehicle While Also Lowering Its Center Of Gravity. The Result Is A Vehicle With Improved Suspension Dampening Less Body Roll And Shorter Braking Distances. Konis Fsd (frequency Selective Damping) Technology Provides For Exceptional Handling And Ride Quality In All Situations. Fsd Allows For The Strut Or Shock To Change The Dampening Force In Relation To The Frequency Of The Movement Of The Vehicle. Now You Can Have A Lowered Vehicle With Stiffer Sport Springs And Maintain Ride Quality For The Street Or Track. Replacing Front Struts Can Be A Simple Diy Job But It Also Requires Specialized Tools And Training To Compress The Coil Spring. At Eeuroparts We Have Compiled A List Of Parts To Assemble The Front Struts For You. With The Difficult Part Completed You Can Simply Bolt On Your New Strut Kit. *a 4-wheel Alignment Is Required After Installation*

Accessory Drive Belt (13x1184) (a/c) (power Steering)

Fuel Door Spring For Any 01-current V70 V70xc Xc 90 S60 All S80 All.

Expansion Tank Hose For Any 99-01 9-5 V6. Connects Expansion Tank To Radiator.

Front Brake Hose For Any 95-97 960 S/v 90 All. 2 Per Car.

Ignition Aperture For Any 99-01 S/v/c 70 Turbo S60 Turbo 01.

Front Wheel Bearing (outside) Hub Dust Cap. 2 Per Car.

Air Filter Housing Diaphragm For Any 9-5 99-09. 1 Per Housing.

Front And/or Rear License Plate Mount. See Fitment Notes For License Plate Position.

Accessory Drive Belt (5k 1300) (alternator) (water Pump)

Door Panel Clip - Lower (garnish Molding To Side Panel)

8-way Power Seat Control Module With Memory Function.

Audi Wheel Bearing Kit With Snap Rings And Hardware.

Filter Kit For 2.5l And 2.0l Engines With 6 Speed Automatic Transmission

Heated Mirror Glass For Cars With Auto-dip Feature.

Auto Trans. W/ Original Flex Plate.1.0kw; 9 Tooth Gear; Direct Drive

Seat Belt Assembly - Front Driver Side (light Beige)