Drivers Side Door Mounted Airbag Emblem Cover In Grey.

Genuine Bmw Antifreeze Coolant. This Is A 1 Gallon (3.8l) Bottle Of Concentrate Antifreeze. Mix 50/50 With Distilled Water Effectively Makes 2 Gallons Of Coolant.

Automatic Transmission Fluid Cooling Line (inlet). Also Requires (2) 32 41 1 093 597 Seals (1) 17 22 1 707 533 Fitting.

Throttle Cable For Vehicles Equipped With Automatic Transmission. Please Use 9157600 For Vehicles Equipped With Manual Transmission.

Kit Includes 20 M12x1.5x82mm Studs And 20 M12x1.5 Titan Extended Conical Lug Nuts Along With Blue Thread Locker. This Is A Complete Kit To Retrofit Your Vehicle From Wheel Bolts To Wheel Studs. This Conversion Kit Is Needed When Using Wheel Spacers And It Makes Wheel Installation Easier. A Perfect Upgrade For Daily Driven And Track Cars. Because The Titan Lug Nuts Tend To Be Used More On Show Vehicles We Have Included A Protective 17mm Lug Nut Socket Which Will Prevent Marring Of The Wheel During Removal And Installation. Exercise Caution When Selecting Lug Taper And Size Due To The Variety Of Factory And Aftermarket Wheel Options. The Lug Nut Type Must Be Matched To The Wheel.

The Dinan Performance Springs Lower The Vehicle For Improved Suspension Geometry And Better Control Over Body Roll. The Dinan Springs Are Cnc Wound With High Tensile Chrome Silicon Wire And Shot Peened For Stress Relief. The Stiffer Springs Will Reduce Rear Suspension Compression On Acceleration And Reduce Front Suspension Compression Under Braking. Reduced Body Roll Allows For More Responsive Steering And Driver Input. The Spring Set Lowers The Vehicle 1/4 In The Front And 1/4 In The Rear.

These Are The Long Body (48mm) Universal Motorsport Injectors Made By Bosch. 550cc Or ~50lb/hr These Injectors Hae An Excellent Spray Pattern And Atomization For Optimized Idle And Tuning. E85 Compatible.

Transform Your Vehicles Style Performance And Sound By Installing A Milltek Sport Exhaust Kit. Made From 2.75 Anti-magnetic T-304 Stainless Steel An Exhaust System Upgrade Provides Sharper Throttle Response Improved Exhaust Gas Flow Through The Use Of Mandrel Bends Increased Power By Utilizing Larger Diameter Tubing And Substantial Weight Savings Over The Stock Exhaust. Stainless Steel Construction Prevents It From Corroding Inside And Out. Most Kits Are Offered In A Resonated Or Non-resonated Version With Non-resonated Versions Having A Louder And More Aggressive Exhaust Tone. Includes Dual 100mm Gt Style Polished Exhaust Tips.

Valve Cover Gasket For Any 85-95 B230 (including Turbo) 240 740 760 780 940.

A/c Compressor For Any 86-mid 89( To Vin K2011975) 9000 Model. Suitable For R12 Or R134a.

Water Pump And Gasket For Any 81-93(+94 Conv) Saab 900 With Any Engine. Genuine Saab.

Engine Mount For Any 960 S/v 90. Left And Right Are The Same. 2 Per Car.

Headlight Bulb Ballast And Control Unit Not Included.

Rear Shock Mount For Any 850 With Nivomat S/v 70 98-00 With Nivomat Rear Shocks. 2 Per Car.

Bottom Section Seat Heater Pad For Any 93-97 9000 Aero.

Drivers Side Tie Rod Assembly. Includes Inner Tie Rod Lock Nut And Outer Tie Rod.

Drivers Side Front Upper Control Arm With Bushing. 1 Per Car.

Drivers Side Hatch Mounted Inner Taillight. Includes Seal Bulbs And Bulb Holders.

Coolant Inlet Tube Gasket For Any S80 6cyl 99-06 Xc90 T6 03-06.

Trunk Emblem For Bmw 3 Series Convertibles And M3 Convertibles.

Passenger Side Front Window Regulator Without Motor

Rear Shock Absorber For Audi A4 Quattro Moxels With Sport Suspension.

Repair Broken Negative Terminal Studs With This Inexpensive Repair

Control Arm Assembly - Front Driver Side Upper (front)

Rear Bushing Mounted In Axle Carrier For Differential.