Skyjacker 2 Inch Poly Value Lift Kit With Hydro Shocks - Jk20-h
    Skyjacker 2 Inch Poly Value Lift Kit With Hydro Shocks - Jk20-h.

    Skyjacker Suspension Lift Kit With Shocks. Whether You're Looking For A Mild Lift To Add Larger Tires Or Looking To Make An Off-road Monster Skyjacker Has A Lift Kit For You. Lift Height: 2 Inch;front Coil Spring Spacers;rear Coil Spring Spacers;front Hydro Shocks;rear Hydro Shocks;bump Stops;hardware Kit;max Tire Size 33x12.50



    Manufacturer: Skyjacker
    ID: Jk20-h
    Category: Suspension And Shocks, gt, suspension Lift Kits
    SKU: Skyjk20-h




Genuine Packages Bf Goodrich All-terrain T/a Ko2 35x12.50r17 And Method Racing Nv 17x8.5 Wheel Package - Set Off 4 - Tirepkg148
    Genuine Packages Bf Goodrich All-terrain T/a Ko2 35x12.50r17 And Method Racing Nv 17x8.5 Wheel Package - Set Off 4 - Tirepkg148.

    Save Time And Money With Our Tire And Wheel Packages. Bf Goodrich All-terrain T/a Ko2 Has A 20 Percent Tougher Sidewall And Features Race-proven Coregard Technology To Take On The Toughest Road Hazards With Confidence. The Split And Bruise Resistant Sidewall Rubber Is Derived From Bf Goodrichs Race Proven Baja T/a Kr2 Tire. Adding A Thicker, Extended Shoulder Rubber Down The Sidewall Helps To Protect More Of The Critical Sidewall Failure Zone. Bfg Has Longer Teadlife Tires That Extend Your Adventures On And Off-road. 2 And 4-door Models;set Of 4 Tires And Wheels;35x12.50r17, Bfgoodrich All-terrain T/a Ko2 Tires;17x8.5 Method Racing Nv Series Wheels;bolt Pattern: 5 On 5;backspace: 4.75;center Caps And Lug Nut Kit Included;tpms Sensors Included;mounting And Balancing Included;mounted Tire And Wheel Packages Are Non-returnable



    Manufacturer: Genuine Packages
    ID: Tirepkg148
    Category: Tires , amp, Wheels, gt, jeep Tire And Wheel Packages
    SKU: Addtirepkg148




Bilstein 9100 Series Smooth Body Shock Absorber - F4-boa-0000387
    Bilstein 9100 Series Smooth Body Shock Absorber - F4-boa-0000387.

    Bilsteins 9100 Smooth Body Series Shock Was Developed For The Professional Off-road Racer, The Bilstein 9100 Series Is Truly State-of-the-art. The Standard Body Is An Extreme Duty Take-apart Damper Designed For Off-road Racing. The 9100s Features Include: Monotube Gas Pressure Construction, 2.65 Or 2 (od) Body. Hose Length And Fittings Options Are Available In Straight, 90 Degree Or 45 Degree. Valving Can Be Adjusted Internally For Rebound And Compression, Completely Owner Rebuildable. Collapsed Length (in.): 19.72;extended Length (in.): 29.9;travel Length (in): 10.18;compression: Custom;rebound: Custom;lower Mount: 1/2 Inch Heim;upper Mount: 1/2 Inch Heim;shaft Diameter: 22mm;reservoir: Yes;finish: Electroless Nickel;body Design: 46mm Id Smooth



    Manufacturer: Bilstein
    ID: F4-boa-0000387
    Category: Suspension And Shocks, gt, shock Absorbers
    SKU: Bilf4-boa-0000387




Borla Touring Cat-back System - 140460bc
    Borla Touring Cat-back System - 140460bc.

    With 30 Years Of Race-proven Engineering Behind Them Borla Is One Of The Premier Manufacturers Of Performance Exhaust Systems In The World. Manufactured From Hihg Quality Materials And With The Latest Technology Borla Provides You With Just What You Are Looking For, Sound, Performance And Looks. Borla S Signature Sound Is Well Recognized By Automotive Enthusiasts Around The World. Join The Winning Team With A Quality Borla Exhaust System. Truck Single Split Rear Exit



    Manufacturer: Borla
    ID: 140460bc
    Category: Performance Parts, gt, exhaust Systems, Headers, Pipes And Hardware, gt, exhaust System Kit
    SKU: Bor140460bc




Crown Automotive Dana 44 Zj Rear 30 Spline Passenger Side Axle Shaft - 4856332
    Crown Automotive Dana 44 Zj Rear 30 Spline Passenger Side Axle Shaft - 4856332.

    For Over 50 Years, Crown Automotive Has Been The Leading Manufacturer And Distributor Of Replacement Parts For Jeep Vehicles. With Over 8,000 Different Part Numbers, Including Many Factory-discontinued Items, We Offer You Exceptional Quality That Is Only Matched By An Exceptional Warranty. Passenger Side;29.25 Inch Long;dana 44 Passenger Axle Shaft



    Manufacturer: Crown Automotive
    ID: 4856332
    Category: Drivetrain , amp, Differential, gt, axle Shaft
    SKU: Cro4856332




Crown Automotive Dana 44 Performance Axle Shaft - 4856332p
    Crown Automotive Dana 44 Performance Axle Shaft - 4856332p.

    For Over 50 Years, Crown Automotive Has Been The Leading Manufacturer And Distributor Of Replacement Parts For Jeep Vehicles. With Over 8,000 Different Part Numbers, Including Many Factory-discontinued Items, We Offer You Exceptional Quality That Is Only Matched By An Exceptional Warranty. Dana 44 Axle;29.14 Inch Long;passenger Side Axle;4340 Alloy Steel;high Strength



    Manufacturer: Crown Automotive
    ID: 4856332p
    Category: Replacement Drivetrain Parts, gt, replacement Axle Parts, gt, cj Model 44 Rear Axle
    SKU: Cro4856332p




Crown Automotive Dana 35 Yj/xj Rear 27 Spline Driver Side Axle Shaft - 83502883
    Crown Automotive Dana 35 Yj/xj Rear 27 Spline Driver Side Axle Shaft - 83502883.

    For Over 50 Years, Crown Automotive Has Been The Leading Manufacturer And Distributor Of Replacement Parts For Jeep Vehicles. With Over 8,000 Different Part Numbers, Including Many Factory-discontinued Items, We Offer You Exceptional Quality That Is Only Matched By An Irregular Warranty. 30.35 Inch Driver Side;non-abs Models;dana 35 Driver Axle Shaft



    Manufacturer: Crown Automotive
    ID: 83502883
    Category: Replacement Drivetrain Parts, gt, replacement Axle Parts, gt, sj Full Size Model 20 Rear Axle
    SKU: Cro83502883




Crown Automotive Dana 30 3.73 Up Differential Case Assembly - 68026549aa
    Crown Automotive Dana 30 3.73 Up Differential Case Assembly - 68026549aa.

    For Oer 50 Years, Crown Automotive Has Been The Leading Manufacturer And Distributor Of Replacement Parts For Jeep Vehicles. With Over 8,000 Different Part Numbers, Including Many Factory-discontinued Items, We Offer You Exceptional Quality That Is Only Matched By An Exceptional Warranty. 2 And 4-door Models;with 4.11 Ratio;with 3.73 Ratio;standard Differential;dana 30/186mm Front Axle



    Manufacturer: Crown Automotive
    ID: 68026549aa
    Category: , gt, gt, jk Wrangler Model 35 Rear Axle
    SKU: Cro68026549aa




Daystar 2 Inch Body Lift Kit - Pa972
    Daystar 2 Inch Body Lift Kit - Pa972.

    The Performance Accessories 972 Body Lift Kit Is A Popular Method To Raise Jeep Wrangler Tj By Providing Two-inches Of Additional Lift And Allowing The Use Of Up To 32-inch Diameter Tires. This Kit Includes All The Necessary Components To Raise The Vehicle In 4 To 5 Hours. This Kit Includes High Pressure Fiberglass Reinforced Nylon Lift Blocks, Manual Transmission Shift Extension, Automatic Transmission Extension Bracket, Transfer Case Pivot And Radiator Dropdown Brackets. Add A Set Of Performance Accessories Urethane (gap-guards 4wd Pn-6908) To Extend The Inner Wheel Well Covers And Hide Any Visible Gaps Between The Body And Frame (sold Separately) No Bumper Brackets Included;proudly Made In The Usa



    Manufacturer: Daystar
    ID: Pa972
    Category: Suspension And Shocks, gt, body Lifts , amp, Bushings, gt, suspension Body Lift Kit
    SKU: Daypa972




Dynomax Thrush Glass Pack Muffler - 24224
    Dynomax Thrush Glass Pack Muffler - 24224.

    The Glass Pack Muffler Has Been Around Since The Beginning Of Hot Rodding. These Thrush Glass Pack Mufflers By Dynomax Have A Heavy-gauge Shell For Maximum Durability, Str Aight-through Design For Maximum Flow And Power And Crf (continuous Roving Fiberglass) For Powerful Tone And Long Life. Universal;steel;red;3 Inch Inlet;dual 2.5 Inch Outlets;29 Inch Length



    Manufacturer: Dynomax Exhaust
    ID: 24224
    Category: Performance Parts, gt, exhaust Systems, Headers, Pipes And Hardware, gt, exhaust Muffler
    SKU: Dyn24224




Drawtite Class Iii/iv Round Tube Max-frame Trailer Hitch - 75838
    Drawtite Class Iii/iv Round Tube Max-frame Trailer Hitch - 75838.

    Drawtite Receiver Hitches Are Built Using All Welded Construction For Maximum Strength And Built To Fit Your Specific Vehicle No Adapters Used For The Strongest And Safest Receiver Hitches Available. All Drawtite Hitches Are Backed By A Nation Wide Lifetime Warranty For Piece Of Mind. Class Iii/iv;round Tube Max-frame;trailer Hitch;rear;5000lb Gross Trailer Weight / 6000lb Weight Distributing;600lb Tongue Weight / 600lb Weight Distributing



    Manufacturer: Drawtite
    ID: 75838
    Category: Towing, gt, hitches, gt, trailer Hitch
    SKU: Dra75838




Pro Comp 2.5 Inch Leveling Lift Kit - 62160
    Pro Comp 2.5 Inch Leveling Lift Kit - 62160.

    Pr O Comp Is The Fastest, Safest, Least Expensive Way To Bring The Front Of Your Vehicle Level With The Rear. This Gives You The Clearance And Ability To Add Wheels And Tires Up To 35 In Dia. Pro Comp Products Do Not Affect The Factory Oem Ride Quality Or Comfort. That's Why Pro Comp Also Offers A Lifetime Warranty For As Long As You Own Your Vehicle Against Defects For All Of Our Products. Lift Height: 2.5 Inch;front Strut Spacers;bolt-on Installation;max Tire Size: 35x12.50



    Manufacturer: Pro Comp Suspension
    ID: 62160
    Category: Suspension And Shocks, gt, leveling Kits, gt, suspension Leveling Kit
    SKU: Exp62160




Firestone Ride-rite Rapid Response Air Accessory System - 2283
    Firestone Ride-rite Rapid Response Air Accessory System - 2283.

    Easy Installation, Very Reasonable Cost, Fast Inflation/deflation Rapid Response;air Accessory System;incl. Elec. Sw.;2 Compressors;two 3 Gal. Air Tanks;control Panel;solenoid Block;wire Harness;oem# Wr17602283



    Manufacturer: Firestone Ride-rite
    ID: 2283
    Category: Suspension And Shocks, gt, air Ride Suspensions, gt, suspension Air Compressor Kit
    SKU: Fir2283




Flex-a-lite Direct-fit Radiator And Fan Combo - 67108
    Flex-a-lite Direct-fit Radiator And Fan Combo - 67108.

    A Direct Bolt-in Flex-a-fit Aluminum Radiator. Flex-a-fit Aluminum Radiators Made By Flex-a-lite Fature Patented Sidetank Tank Technology. The T Channels Offer 130 Percent Better Heat Transfer, A Durable Mounting System For The Radiator, Electric Fan And Optional Oil Cooler Or Expansion Tank. System Comes With Three 10-inch Electric Fans, Moving A Total Of 2,400 Cfm Of Airflow. The Dual 5/8-inch All-aluminum Radiator Core Is Hand Welded In The U.s. To The Flex-a-fit Sidetanks. 3 Electric Fans;variable Speed Controller;o.e. Radiator Mounting Points;brackets Are Included For No-drill Installation;includes Variable Speed Controller;no Automatic Transmission Cooler;made In The U.s.a



    Manufacturer: Flex-a-lite
    ID: 67108
    Category: Heating , amp, Cooling, gt, engine , amp, Transmission Cooling, gt, radiator And Cooling Fan Kit
    SKU: Flx67108




Genright Rocker Guards (bare Aluminum) - Rcg-8104
    Genright Rocker Guards (bare Aluminum) - Rcg-8104.

    This Is The New Lightweight Rocker Guard For The 4 Door Jeep Jk. Its Sleek Design Is Molded To Fit The Jks Curved Body's Shape. This Is A Great Upgrade For Anyone Looking For A Functional Step On Their Jk. Installaion Requires Minor Drilling Of The Kick Plate Mounting Locations. If Still Running The Factory Plastic Flares, These Rockers Will Require Trimming About 5/8 Off The Bottom Of The Factory Flares. 4-door Models;laser Cut And Cnc Formed From Solid 3/16 Inch Aluminum;sold Un Painted;3 Piece Design Ties Into Multiple Points For Maximum Durability;wraps All The Way Under And Ties To The Body Mounts;will Work With Metal Tube Flares Or The Factory Plastic Flares;shape Design Acts As A Nice 4 Inch Wide Step For The Vehicle Occupants;sold As A Pair;made In U.s.a.



    Manufacturer: Genright
    ID: Rcg-8104
    Category: Armor , amp, Protection, gt, rocker Protection, gt, rock Sliders And Guards
    SKU: G/rrcg-8104




Holley Performance Efi Fuel Pump Kit - 526-4
    Holley Performance Efi Fuel Pump Kit - 526-4.

    Holley Efi Fuel Kits Are The Perfect Addition To Your Terminator Or Holley Efi Kit. They Are Engineered Using Holley Fuel Pumps, Regulators And Filters Coupled With Quality Earls Plumbing To Provide A Fuel System Tailored To The Needs Of Your Terminator Efi System. Efi Fuel System Kit;for Use W/terminator Efi;incl. In Line Fuel Pump;billet Regulator;metal Filters And Earls Super Stock Hose



    Manufacturer: Holley Performance
    ID: 526-4
    Category: Performance Parts, gt, carburetors, Intake Manifolds, And Throttle Body, gt, electric Fuel Pump
    SKU: Hol526-4




Odyssey Batteries Extreme Racing, Universal, 450 Cca, Top Post - Pc950
    Odyssey Batteries Extreme Racing, Universal, 450 Cca, Top Post - Pc950.

    Whether For Everyday Or Emergency Use, Todays Vehicles Are Loaded With More Electronics Than Would Have Been Imaginable Just A Few Years Ago. Odyssey Batteries Have Been Designed To Keep Up With The Changes. Because Their Plates Are Made Of Pure Virgin Lead (unlike The Lead Alloy In Most Batteries), We Can Pack In More Plates. And More Plates Mean More Plate Surface Area, And Much More Power - Twice The Overall Power And Three Times The Life Of Conventional Batteries - Up To 400 Cycles At 80% Depth Of Discharge! 950 Phca;450 Cca;rc Min. 60;w/ Tin Plated Brass M6 Stud Terminals



    Manufacturer: Odyssey Batteries
    ID: Pc950
    Category: Electrical, gt, battery , amp, Battery Accessories, gt, battery
    SKU: Odypc950




Olympic 4x4 Products Tuff N Ez Tire Carrier In Textured Black - 750-174
    Olympic 4x4 Products Tuff N Ez Tire Carrier In Textured Black - 750-174.

    Making It Easy To Get To Your Jeeps Rear Storage. Eliminates The Hassle Of Struggling With Typical Tire Carriers Release Mechanism That Hold The Tire Carrier In Place On The Bumper. With The Tuff N Ez Installed The Weight Of Your Spare Tire Is On The Bumper And Vehicle Frame. When You Open Your Tailgate The Tuff N Ez Tire Carrier Opens In Perfect Harmony With The Tailgate And Closes Just As Easily. The Uff N Ez Has Three Tire Vibration Dampening Depressors. Olympic Has Engineered A Unique Vibration Minimizing Adjustable Receiver That Is Part Of The Unique Tailgate Mounting Assembly. It Has Virtually Eliminated Any Vibrations Compartment. Olympic 4x4 Products Are Available In Your Choice Of High Gloss Black, Texture Black And Pink Stuff Powder Coated Finishes Or Unpainted In Raw Steel For Builders. 2 And 4-door Models;textured Black Powdercoat;for Rear Smuggler, Boa And Rock Bumpers;fits On 1-3/4 Inch Hub Spindles



    Manufacturer: Olympic 4x4 Products
    ID: 750-174
    Category: Bumpers, Tire Carriers , amp, Winch Mounts, gt, spare Tire Carriers
    SKU: Oly750-174




Poison Spyder Rocker Knockers With Sliders (bare Steel) - 17-08-020
    Poison Spyder Rocker Knockers With Sliders (bare Steel) - 17-08-020.

    The Most Vulnerable Areas On The Body Of The Jeep Jk Are The Rocker Panels. Poison Spyder Rocker Knockers Protect Your Jks Rocker Panel Area While Enabling You To Slide Over Rocks And Obstacles. Rocker Knockers Enhance Your Jeeps Trail Performance While Adding Rugged Off-road Looks To Your Jk. Poison Spyder Jk Rocker Knockers Are Engineered For Brute Strength And Impact Resistance By Attaching To The Jeeps Body In 14 Strategic Bolt Locations. The Mounting Plate Is Cnc Laser Cut From 3/16 Plate Steel And Prec Ision Brake-formed For A Perfect Fit. The Tubular Rocker Rail Is Rugged 1.75 X .120 Wall Dom Structural Tubing. The Slider Rail Is Fabricated From Cnc-bent 1.5 X .120 Wall Dom Tubing. The Space Between The Slider And The Main Tube Of The Rocker Knocker Is Filled With A Cnc Laser-cut Slider Skid. The Skid Features Poison Spyders Exclusive Oval Dimples For Structural Strength As Well As Great Poison Spyder Looks. The Skid Attaches With Countersunk Stainless Steel Flat Head Cap Screws For A Flush Surface. The Slider And Skid Mount At An Angle To The Main Tube Of The Rocker Knocker To Provide Boatside-like Protection From The Rocks While Keeping The Jeeps Doors And Body A Safe Distance From Higher Level Trail Hazards. Another Quality Element Of The Poison Spyder Rocker Knocker Is The Ability To Remove The Outer Slider Skid. The Outer Skid Is Built From 1/8 Steel And Is Secured To A 3/16 Base Plate Welded Into The Slider Hoop Assembly. The Slider Does Not Rely On The Skid For Structure. The Advantage Of Having The Ability To Remove The Skid, Is To Allow You To Replace It If It Becomes Damaged To A Level That It Has Lost Its Aesthetic Appearance Or Functionality. Also You Wwill Be Able To Customize The Sliders To Match Your Jeep, And To Easily Be Able To Remove It For Re-finish. Poison Spyder Jk Rocker Knockers Are Compatible With All Known Suspensions And Body Lifts, Including Long Arm Kits. Because The Rocker Knockers Mount Directly To The Jeeps Body Tub, They W 2-door Models;cnc Laser Cut From 3/16 Inch Plate Steel;slider Rail Is Fabricated From Cnc-bent 1.5 Inch X .120 Wall Dom Tubing;features Poison Spyders Exclusive Oval Dimples For Structural Strength



    Manufacturer: Poison Spyder Customs
    ID: 17-08-020
    Category: Armor , amp, Protection, gt, rocker Protection, gt, rock Sliders And Guards
    SKU: Psc17-08-020




Rubicon Express Extreme-duty Long Arm Suspension Upgrade Lift Kit - Re7230
    Rubicon Express Extreme-duty Long Arm Suspension Upgrade Lift Kit - Re7230.

    Designed For Tj Owners Who Already Have A Rubicon Express Super-flex Short Arm Suspension System, These Kits Alow You To Upgrade To The Extreme-duty Long Arm System. Our Extreme-duty Long Arm System Will Provide Noticeable Improvements In Your Tjs On Road Handling, Returning A Nearly Stock Ride Quality. Off Road You Will See Unmatched Performance On The Most Extreme Trails. These Upgrade Systems Include A Three-piece Belly Pan For Easy Transfer Case And Transmission Access; Rear Stainless Steel Brake Lines And The Chromoly Rubicon Express Extreme-duty Long Arms. Lift Heights Depends On The System You Are Upgrading. Front And Rear Lower Chromoly Long Arms Along With Rear Uppers;new Pt-meg Super-ride Bushings, Designed For On And Off-road Performance;adjustable Control Arms With Serviceable Super-flex Spherical Ball Joints



    Manufacturer: Rubicon Express
    ID: Re7230
    Category: Suspension And Shocks, gt, suspension Components, gt, suspension Control Arms
    SKU: R/ere7230




Rugged Ridge Stainless Steel Short Base Light Mount Front Bumper Center Section (stainless Steel) - 11540.71
    Rugged Ridge Stainless Steel Short Base Light Mount Front Bumper Center Section (stainless Steel) - 11540.71.

    The Light Mount Base Includes Two Light Mounting Locations. Four Bolt Frame Mount Design Provides The Toughest Bumper Attachment Found Anywhere While Creating 2 Overbuilt Pull Points. Each Short Base Includes Side Filler Plates To Close Up The Ends Creating An Off- Roaders Dream Bumper. 2 And 4-door Models;polished Stainless;d-rings Included With Mount;includes 2 Light Mounting Locations



    Manufacturer: Rugged Ridge
    ID: 11540.71
    Category: Replacement Exterior Parts, gt, replacement Body Parts, gt, tj Wrangler Body Parts
    SKU: Rug11540.71




Rugged Ridge Xhd Replacement Soft Top With Tinted Windows (black Diamond) - 13722.35
    Rugged Ridge Xhd Replacement Soft Top With Tinted Windows (black Diamond) - 13722.35.

    New Xhd Replacement Soft Tops From Rugged Ridge Now Available! Each Fabric Soft Top Is Designed To Easily Fit The Factory Original Soft Top Hardware. Simply Take Off The Old Top And Slip On The New. It Is Just That Easy! These New Designs Feature Reinforced Stitching On The Heavy Pull Areas And Heavy Duty 30 Mil Thick Glass! All Xhd Soft Tops Boast 20 Oz Durable Vinyl Coated Polyester And Cotton Fabric That Last The Test Of Time. All Sewn Seams Use Marine Grade Thread To Make Sure It Does Not Deteriorate Or Discolor In The Sun. Each Seam Is Literally Welded Shut With Durable Heat Seal Tape To Keep Moisture Out While Keeping The Original Look Of The Top Intact. Attaching The Rugged Ridge Top Is Easy With The Factory Original Belt Rail Attachment Method; Simply Tuck Under The Rail And Go! All Our Tops Feature 2 Choices Of Door Options. Rugged Ridge Makes A Replacement Top Hat Fits Either! Each Top Is Backed By An Industry Leading 3 Year Limited Warranty Against Manufacturer Defects. Black Diamond;tinted Windows;upper Doorskins Included;must Reuse Factory Hardware;reinforced Stitching On The Heavy Pull Areas;heavy-duty 30 Mil Thick Glass;20 Oz. Durable Vinyl Coated Polyester And Cotton Fabric



    Manufacturer: Rugged Ridge
    ID: 13722.35
    Category: Tops , amp, Accessories, gt, jeep Soft Tops
    SKU: Rug13722.35




Tuffy Security Tailgate Enclosure - 299-01
    Tuffy Security Tailgate Enclosure - 299-01.

    The Unlimited Tailgate Enclosure Works In The 4-door Model With Hte Rear Seat & The 2-door Model With The Rear Seat Removed. This All Steel Cargo Enclosure Is Our Simplest Four-piece Design Yet That Creates A Lockable Storage Area Completely Protected On All Sides. In Comparison With Our #275 Jk Deck Enclosure, The Top Is Fixed And Outfitted With Tie-down Anchors. It Does Not Rotate Open But Instead Can Be Removed For Storage Of Taller Items. It Works In Conjunction With The Lockable Vehicle Tailgate To Secure The Area Cteated. The Enclosure Maintains The Use And Function Of The Rear Seat In 4-door Models And Will Work In 2-door Modles With The Rear Seat Removed Providing Tuffys Largest Secure Cargo Area Available For The 2-door Jk. This Jumbo Sized Enclosure Quickly Installs In Both The 4 & 2-door Jeep Jk Models With An Oem Hardtop Or Softtop. It Will Work In Vehicles Equipped With Or Without The Subwoofer And Functions With The Oem Storage Cover Or The Tuffy Cubby Cover, Part #143. The Lid Removes Without The Use Of Hand Tools To Allow For Storage Of Large Or Tall Items. Patent Pending. On Vehicles With Power Door Locks, Arming The Security Alarm Disables The Power Door Lock Switches And Ensures The Tailgate And Tuffy Enclosure Are Secure, Even On Softtop Models Or With The Top Removed. On The 2-door Models, Additional Hardware (not Supplied) And Drilling Is Required To Install The Front Panel To The Floor. 4-door Models With Or Without Oem Sub-woofer And Oem Hard Or Soft Top;2-door Models With Rear Seat Removed With Or Without Oem Sub-woofer And Oem Hard Or Soft Top;16-gauge Steel Construction;durable Powdercoat Finish;4 Heavy Duty Tie-down Rings Installed Standard;storage Enclosure Is Secured Shut When The Rear Vehicle Door Is Locked;includes Perimeter Weather Seal



    Manufacturer: Tuffy
    ID: 299-01
    Category: Interior, gt, storage , amp, Organizers, gt, cargo Area Security Enclosure
    SKU: Tfy299-01




Tuffy Series Ii Security Full Console (charcoal Gray) - 040-03
    Tuffy Series Ii Security Full Console (charcoal Gray) - 040-03.

    Each Series Ii Security Console Features A D Rink Holder, Removable Inner Storage Tray, Pry-guard 2 Lockable Weather Resistant Lid And A Built-in Lid Stop. Tj Console Does Not Have A Rubber Inner Floor Mat. Colors 01 And 25 Are Recommended For 1999-03 Wranglers With Agate Or Camel Interiors. Charcoal Powder Coat;16-gauge Steel;removable Inner Storage Tray;pry Guard Ii Weather Resistant Lid;limited Lifetime Warranty



    Manufacturer: Tuffy
    ID: 040-03
    Category: Interior, gt, storage , amp, Organizers, gt, center Console
    SKU: Tfy040-03




Warrior Front Wider Tube Fender Flares (black) - S7315
    Warrior Front Wider Tube Fender Flares (black) - S7315.

    Designed To Replace The Original Flares, Warriors New 12.5 Front Tube Fender Flares And 6.5 Rear Tube Fender Flares Mount Into Existing Fender Wells With Minimal Or No Drilling. Constructed Of 1.5 Steel Tubing, These Beefy Frames Are A Perfect Complement To Our Tube Doors. The Outer Mounting And Frame Of The Flare Comes In A Black Powder-coated Finish While The Flares Top Plate Comes In Three Finishes To Match Other Warrior Body Armor; Polished Diamond Plate, Black Powder-coated Diamond Plate And Textured Black Steel. Our Steel Topped Applications Are Available In An Uncoated Bare Steel Option For Paint Matching Purposes. All Fender Flares Are Sold In Front And Rear Pairs. An Optional Led Side Marker Light Can Be Incorporated Into The Leading Edge Of The Front Flare And Comes Complete With Wiring Harness For Easy Installation. Light Kits Are Sold Separately. 2 And 4-door Models;16-gauge Steel;12.5 Inch Wide;1.5 Inch Steel Tubing;no Drilling Required;sold As A Pair



    Manufacturer: Warrior
    ID: S7315
    Category: Exterior Parts , amp, Car Care , Fender Flares, gt, fenders , amp, Flares, gt, tube Fenders
    SKU: W/is7315






Auto Parts | Brake | Steering | Auto | Ignition | Belts | Engine | Fuel | Vehicle
Copyright © 2024 MotorHolder.com All rights reserved.
With any using link to MotorHolder.com strongly required.