Poison Spyder Defender Front Fenders (bare Steel) - 14-02-050
    Poison Spyder Defender Front Fenders (bare Steel) - 14-02-050.

    Defenders Are Fabricated Entirely From Cnc Laser-cut, Precision Brake-formed 3/16 Plate Heavy Duty P&o Steel. The Defender Has An Extra Return, Or Lip Along The Underside Of The Fender, Which Provides Better Protection From Cutting Into A Fully Stuffed Tire, While Also Lending Extra Strength To The Outer Edge Of The Fender, Where It Is Most Likely To Come In Contact With Rocks, Canyon Walls, Trees, Etc. The Defender With Negative Flare Provides The Maximum Clearance For Tire Articulation And Tight Trails. We Call It The Negative Flare Because It Actually Subtracts From The Stock Fender Width, Tapering Inward To Closely Hug The Edge Of The Jeeps Hood, Leaving Just Enough Of A Fender Edge To Mount The Hood Latch And Provide A Beefy Steel Rub Rail To Protect The Side Of The Hood. For Those Looking To Maintain A Low Center Of Gravity By Running Big Tires With Minimal Lift, The Negative Flare Is A Great Way To Allow Full Suspension Articulation While Still Having A Beefy, Armored Non-highline Fender. Why Deal With The Cost Or Hassle Of Replacing Your Existing Inner Fenders? Defenders Are Designed To Work With Your Jeeps Oe Inner Fenders, Saving Cost As Well As The Hassle Of Removal/installation/relocation Of All Of Your Under-hood Gear. Even On The Non-highline Version, The Defender Provides A Much Larger Wheel Opening Than Stock Or Some Competitors' Tube Fenders. The Back Of The Wheel Opening, Where Larger Tires Tend To Rub When The Steering Is At Full-lock, Is Approximately 2.5 Further Back Compared To Typical Tube Fenders, And About 4 Further Back Than The Stock Jeep Flares. Shipped Unpainted And Ready To Install On Your Jeep. Bare Steel;negative Flare;made From 3/16 Inch Steel Plate;retains Inner Fender;mounting Location For A 3/4 Inch Led Marker



    Manufacturer: Poison Spyder Customs
    ID: 14-02-050
    Category: Exterior Parts , amp, Car Care , Fender Flares, gt, fenders , amp, Flares, gt, tube Fenders
    SKU: Psc14-02-050




4wd Shifter Knobs And E-brake Cover Pak (billet Aluminum) - Jp-181109jkapkg2
    4wd Shifter Knobs And E-brake Cover Pak (billet Aluminum) - Jp-181109jkapkg2.

    Add A Touch Of Style To The Inside Of Your Jeep With This Custom Shifter Knobs And E-brake Package From Drake Off Road. The Kit Includes Automatic Transmission Shifter Knob, 4wd Shifter Knob And Gray E-brake Handle Cover.



    Manufacturer: 4wheel Drive Hardware
    ID: Jp-181109jkapkg2
    Category: Interior, gt, interior Accessories, gt, interior Style Kit
    SKU: 4wdjp-181109jkapkg2




Afe Power Magnumflow Intake Pro-guard 7 Air Filter - 72-90040
    Afe Power Magnumflow Intake Pro-guard 7 Air Filter - 72-90040.

    Afes High Performance, High Flow Air Filter Replaces The Restrictive Factory Paper Filters And Lets Your Engine Breathe Better. Paper Filters Do A Good Job In Keeping Dirt Out But Can Clogged Easily So That They Need To Be Replaced Frequently. Foam Filters Also Clog Easily. A Washable/reusable, Cotton Gauze Filter Like Ours Allows More Airflow And Is Washable And Reusable. Filter Type: Oil;washable: Yes;filter Material: Cotton Gauze With Synthetic Fabric;replacement Type: Aftermarket Replacement;use W/pn Afe75-11342/ Afe75-11343



    Manufacturer: Afe Power
    ID: 72-90040
    Category: Performance Parts, gt, intake Kits, Air Filter , amp, Throttle Body Spacers, gt, air Filter
    SKU: Afe72-90040




Auto Meter Pro-comp Electric Water Temperature Gauge - 5437
    Auto Meter Pro-comp Electric Water Temperature Gauge - 5437.

    Red Pointer For Quick Glance Monitoring, Safeguard Against Dangerous Conditions, Precision Movement And Extreme Accuracy,1 Year Limited Warranty Electric Water Temperature Gauge;100 - 250 Deg. F;air-core Meter Movement



    Manufacturer: Auto Meter
    ID: 5437
    Category: Performance Parts, gt, gauges, gt, water Temperature Gauge
    SKU: Amg5437




Bestop Trailmax Ii Vinyl Fixed Rear Bench Seat (black) - 39437-15
    Bestop Trailmax Ii Vinyl Fixed Rear Bench Seat (black) - 39437-15.

    The Fixed Rear Bench Provides Comfortable Seating For 2 And Fits 1955-95 Yj Rangler And Cj Vehicles. Black Denim Vinyl;low Back Seat;atlas Frame Is Strong And Durable;includes Mounting Hardware;dimensions 33.5 Inch Wide X 16.5 Inch Deep X 17 Inch Tall



    Manufacturer: Bestop
    ID: 39437-15
    Category: Interior, gt, seating, gt, seats
    SKU: Bst39437-15




Crown Automotive Front Bumper Fascia - 5066606ab
    Crown Automotive Front Bumper Fascia - 5066606ab.

    For Over 50 Years, Crown Automotive Has Been The Leading Manufacturer And Distributor Of Replacement Parts For Jeep Vehicles. With Over 8,000 Different Part Numbers, Including Many Factory-discontinued Items, We Offer You Exceptional Quality That Is Only Matched By An Exceptional Warranty. Primed;paintable;front Bumper Fascia



    Manufacturer: Crown Automotive
    ID: 5066606ab
    Category: Bumpers, Tire Carriers , amp, Winch Mounts, gt, bumper Accessories, gt, bumper Cover
    SKU: Cro5066606ab




Crown Automotive Differential Disc And Plate Kit - 83500263
    Crown Automotive Differential Disc And Plate Kit - 83500263.

    For Over 50 Years, Crown Automotive Has Been The Leading Manufacturer And Distributor Of Replacement Parts For Jeep Vehicles. With Over 8,000 Different Part Numbers, Including Many Factory-discontinued Items, We Offer You Exceptional Quality That Is Only Matched By An Exceptional Warranty. With Trac-lok;with Trac-lok;with Trac-lok;with With Trac-lok 3.73 Ratio;with Trac-lok;dana 35 Differential Disc And Plate Kit



    Manufacturer: Crown Automotive
    ID: 83500263
    Category: Drivetrain , amp, Differential, gt, jeep Oem Replacement Axle Parts, gt, differential Disc Kit
    SKU: Cro83500263




Curt Manufacturing Q16 Fifth Wheel Head Unit - Crt16043
    Curt Manufacturing Q16 Fifth Wheel Head Unit - Crt16043.

    Q16;fifth Wheel Head Unit;incl. Q16 Head Unit Pn[16520];fifth Wheel Trailer Hitch Leg Kit Pn[16021];ram Oem



    Manufacturer: Curt Manufacturing
    ID: 16043
    Category: Towing, gt, hitches, gt, fifth Wheel Trailer Hitch Head Unit
    SKU: Crt16043




Fabtech 4 Inch Basic Lift Kit W/stealth Shocks - K4001m
    Fabtech 4 Inch Basic Lift Kit W/stealth Shocks - K4001m.

    This 4 Inch Basic System For The Tj Utilizes Conventional Urethane Bushings In The Link Arms. System Includes Coil Springs, Bump Stops, Fixed Sway Bar Links, Rear Trac Bar Bracket And More. Stealth Is The First All Black Monotube Shock Absorber, With An Identifiable Raised Metal Nameplate, That Represents The Signature Of Quality You Can Reyl On For A Superior Ride At An Affordable Price. Use 33/1250r15 Tires W/ 15x7 Wheels W/ 3 3/4 Inch Bs W/ Minor Trimming. Front Driveshaft Will Need To Be Shortened On 2003 And Up Rubicon Models Due To Increased Travel. Basic System;w/ Stealth Monotube Shocks



    Manufacturer: Fabtech
    ID: K4001m
    Category: Suspension And Shocks, gt, suspension Lift Kits
    SKU: Fabk4001m




Husky Liners Weatherbeater Cargo Liner (gray) - 20622
    Husky Liners Weatherbeater Cargo Liner (gray) - 20622.

    There Will Be Mud, Snow, Slush, Sand, Muck, And Worse. But That's Okay Because Husky Liners Let You Do What You Do Without Worrying About The Messy Consequences. Husky Liners Brand Weatherbeater Floor Liners Offer Superior Carpet Protection Against Mud, Spills And Mess With A Fresh Appealing Design Complimenting Todays Current Model Trucks And Suvs Interior Styling. Protection Prevents Stains & Soiling Of Your Carpeted Areas. Increaess Your Vehicles Resale Value. Form-fit Edge Patented Design Gives Your Floor Liner A Finished Look While Keeping Damaging Spills Off Your Doorsill And Carpet. Custom Fit Designed Using The Latest In Laser Scanning Technology To Fit The Complex Surfaces Of Your Specific Vehicles Floorboard. Patented Molded In Nibs On The Back Of The Floor Liner Help Prevent Annoying Shifting Of The Liners. Tough & Durable Patented Rubberized Material Is Resistant To Most Chemicals And Minimizes Cargo Shifting. Available For Front Seat, 2nd Seat, And 3rd Seat Black, Grey Or Tan. Designed And Manufactured In The Usa. Gray;form-superior Carpet Protection Against Mud,spills,and Mess;custom Patented Molded In Nubs On The Back Of The Floor Liner Help Prevent Shifting Of The Liners;designed And Manufactured In The Usa



    Manufacturer: Husky Liners
    ID: 20622
    Category: Interior, gt, floor Mats , amp, Cargo Liners, gt, cargo Area Liiners
    SKU: Hus20622




Hi-lift Jack Jack Accessory Kit - Ork
    Hi-lift Jack Jack Accessory Kit - Ork.

    Includes 8' Strap, Winch Tensioner, Custom Nose Attachment, Gloves, Hardware And Carrying Case. Includes 8 Foot Strap, Winch Tensioner, Custom Nose Attachment, Gloves, Hardware And Carrying Case



    Manufacturer: Hi-lift Jack
    ID: Ork
    Category: Winches And Track Accessories, gt, trail Jacks , amp, Vehicle Recovery Equipment, gt, trail Jacks
    SKU: H/lork




Omix-ada Replacement Steel Hood - 12035.01
    Omix-ada Replacement Steel Hood - 12035.01.

    Direct Oe Replacement Jeep Parts And Accessories Built To The Original Specifications By Omix-ada. Limited Five Year Manufacturers Warranty. Replacement Steel Body Parts Are Sold As Is. Some Minor Imperfections Or Damage Can Occur During Shipping. Professional Installation Recommended. Claims For Freight Damage Must Be Placed Directly With Freight Carriers. Black Primer;minor Body Work May Need Completed For Fitment;replacement Steel Hood



    Manufacturer: Omix-ada
    ID: 12035.01
    Category: Replacement Exterior Parts, gt, replacement Body Parts, gt, cj2a, 3a And 3b Replacement Parts
    SKU: Oai12035.01




Omix-ada Tail Light - 12403.26
    Omix-ada Tail Light - 12403.26.

    Direct Oe Replacement Jeep Parts And Accessories Built To The Original Specifications By Omix-ada. Limited Five Year Manufacturers Warranty. Passenger Side;sold Individually;tail Liight



    Manufacturer: Omix-ada
    ID: 12403.26
    Category: Replacement Exterior Parts, gt, replacement Lighting Parts, gt, jk Wrangler Lighting
    SKU: Oai12403.26




Omix-ada Master Clutch Kit - 16902.21
    Omix-ada Master Clutch Kit - 16902.21.

    For Over 50 Years, Crown Automotive Has Been The Leading Manufacturer And Distributor Of Replacement Parts For Jeep Vehicles. With Over 8,000 Different Part Numbers, Including Many Factory-discontinued Items, We Offer You Exceptional Quality That Is Only Matched By An Exceptional Warrranty. 2 Or 4 Door Models;with 3.6l V6 Engine;kit Includes A Clutch Disc, Pressure Plate And Release Bearing



    Manufacturer: Omix-ada
    ID: 16902.21
    Category: Drivetrain , amp, Differential, gt, clutch , amp, Bellhousing Components, gt, clutch Kit
    SKU: Oai16902.21




Omix-ada Air Conditioner Condenser - 17950.06
    Omix-ada Air Conditioner Condenser - 17950.06.

    Direct Oe Replacement Jeep Parts And Accessories Built To The Original Specifications By Omix-ada. Limited Five Year Manufacturers Warranty. A/c Condenser;4.0 With Serpentine



    Manufacturer: Omix-ada
    ID: 17950.06
    Category: Replacement Under Hood Parts, gt, replacement Cooling Parts, gt, jk Wrangler Cooling Parts
    SKU: Oai17950.06




Omix-ada Air Conditioner Condenser - 17950.03
    Omix-ada Air Conditioner Condenser - 17950.03.

    Direct Oe Replacement Jeep Parts And Accessories Built To The Original Specifications By Omix-ada. Limited Five Year Manufacturers Warranty. A/c Condenser



    Manufacturer: Omix-ada
    ID: 17950.03
    Category: Replacement Under Hood Parts, gt, replacement Air Conditioning Parts, gt, wj Grand Cherokee Air Conditioning
    SKU: Oai17950.03




Rcv Axles Ultimate Dana 44 30 Spline Front Cv Axle Set For Rubicon Models - Cvj44 30 Spline Front - Cvj44-jk
    Rcv Axles Ultimate Dana 44 30 Spline Front Cv Axle Set For Rubicon Models - Cvj44 30 Spline Front - Cvj44-jk.

    Rcv Performance Ultimate Cv Axles Simply Replace Your Jeep Jks Weak Dana 44 U-joint Axle Shafts With A High-strength Constant Velocity Design. Tests Prove Ultimate Cv Axles To Be Twice As Strong As Oem Jeep Jk Shafts, And They're Just As Tough At A Straight Angle As They Are At Extreme Angles - Where U-joints Are Weakest. Ultimate Cv Axles Also Eliminate U-joint Binding To Allow Smooth Transfer Power To The Ground. Even If You Have Big Tires And Big Power There Are No Worries. Ultimate Cv Axles Are Low Maintenance And Operate With A Smoothness You Can Feel - Whether Off Road Or On The Street. And We Back It All With A No Questions Asked Limited Lifetime Warranty. 2 And 4-door Models;dana 44 Front Axle;rubicon Models Only;inner Spline 30;outer Spline 32;includes Driver And Passenger Side Cv Axle Shafts And Sst Seals And Installation Tool;includes Installation Instructions, Synthetic Moly Grease, And Installation Hardware;black Oxide Coating Is Standard;eliminates U-joint Binding To Allow Smooth Transfer Power To The Ground;no Questions Asked Limited Lifetime Warranty - Void If Running Over 40 Inch Tires



    Manufacturer: Rcv Axles
    ID: Cvj44-jk
    Category: , gt, gt, axle Shaft Assembly
    SKU: Rcvcvj44-jk




Rugged Ridge Hid Off Road Lighting - 15206.01
    Rugged Ridge Hid Off Road Lighting - 15206.01.

    Rugged Ridge Hid Off Road Lighting Takes Off Road Lighting To The Next Level! We Mated The Brilliance Of High Intensity Discharge Bulbs With The Rugged Construction Of Our Traditional Halogen Off Road Lights. The Result Is More Efficient And Powerful Beam Better Capable Of Illuminating The Night Sky. Hid Lights Are 2-1/2 Times More Powerful Than Halogen Lights And Draw 60% Not So Much Current Than A Standard 100w Fog Light. Ouur 6 Inch And 5 Inch Hid Lights Are Constructed With Heavy-duty Stamped Steel Housings, And Are Available In Corrosion Resistant Black Or Stainless Steel Finish. Rugged Ridge Lights Feature Waterproof Connections, Internal Ballast, And A Reinforced Multi-directional Mounting Base. The Lights Are Available Individually Or In Kits Containing Pre-terminated Wiring Harness, Relay, Impact Resistant Stone Guards And Illuminated Dash Switch. Studies Have Demonstrated Drivers React Faster And More Accurately To Obstacles With Hid Lighting Rather Than Halogen Ones. So, Upgrade Your Lighting Today! 6 Inch Round;stainless Steel;12v 35w 4200k Hid Bulb;internal Ballast;waterproof Connections;reinforced Multi-directional Mounting Base;hid Lights Include Impact Resistant Stone Guard;sold Individually



    Manufacturer: Rugged Ridge
    ID: 15206.01
    Category: Lighting , amp, Lighting Accessories, gt, off-road Lighting
    SKU: Rug15206.01




Rugged Ridge Hid Off Road Lighting - 15206.51
    Rugged Ridge Hid Off Road Lighting - 15206.51.

    Rugged Ridge Hid Off Road Lighting Takes Off Road Lighting To The Next Level! We Mated The Brilliance Of High Intensity Discharge Bulbs With The Rugged Construction Of Our Traditional Halogen Off Road Lights. The Result Is More Efficient And Powerful Beam Better Capable Of Illuminating The Night Sky. Hid Lights Are 2-1/2 Times More Powerful Than Halogen Lights And Draw 60% Less Current Than A Standard 100w Fog Light. Our 6 Inch And 5 Inch Hid Lights Are Constructed With Heavy-duty Stamped Steel Housings, And Are Available In Corrosion Resistant Black Or Stainless Steel Finish. Rugged Ridge Lights Feature Waterproof Connections, Internal Ballast, And A Reinforced Multi-directional Mounting Base. The Lights Are Available Individually Or In Kits Containing Pre-terminated Wiring Harness, Relay, Impact Resistant Stone Guards And Illuminated Dash Switch. Studies Have Demonstrated Drivers React Faster And More Accurately To Obstacles With Hid Lighting Rather Than Halogen Ones. So, Upgrade Your Lighting Today! 6 Inch Round;stainless Steel;includes Wiring;12v 35w 4200k Hid Bulb;internal Ballast;waterproof Connections;2-1/2 Times More Powerful Than Halogen Bulbs;hid Lights Include Impact Resistant Stone Guard;includes Pre-terminated Wiring Harness And Illuminated Das



    Manufacturer: Rugged Ridge
    ID: 15206.51
    Category: Lighting , amp, Lighting Accessories, gt, off-roas Lighting
    SKU: Rug15206.51




T-rex Grilles Upper Class Series Mesh Grille - 51792
    T-rex Grilles Upper Class Series Mesh Grille - 51792.

    T-rex Is A Billet Grille Manufacturer Dedicated To Delivering A Quality Product. T-rex Specializes On A Specific Market And Caters To The Needs Of The Customer. Focused In The Design Department Is In The Fit And Ease Of Installation Which Mean Bolt-on Billet Grilles With Less Tools And No Cutting Which In Turn Equals More Productivity. When It Comes To Manufacturing A Quality Product, It Starts In The Design Department But It Doesn't End There. T-rex Starts With Solid Stock Of Aircraft Quality T-5 Or T-6 Billet Aluminum Rather Than Extruded Aluminum As Used By Some Competitors. Every Billet Grille Is Treated To A Durable Glossy Powder-coat. The Final Stage Of Manufacturing Includes A Three-stage Polishing And Cleaning. The Entire Process Takes Place In Their Southern California Manufacturing Facility. Upper Class Sseries;mesh Grille;black Powdercoat Steel;w/ Oe Logo Plate



    Manufacturer: T-rex Grilles
    ID: 51792
    Category: Exterior Parts , amp, Car Care, gt, grilles, gt, grille Insert
    SKU: T/r51792




Teraflex Freedom Top Holder And Full Door Hanger - 1830702
    Teraflex Freedom Top Holder And Full Door Hanger - 1830702.

    Safely Hang Your Jk Freedom Top And Full Hard Door With This Combination Kit. The Freedom Top Bracket Safely Stores The Panel When Not In Use. The Bottom Bracket Also Acts As A Full Door Hanger. The Bracket Fits Into The Window Track And Eliminates All Pressure Off Of The Window Seals And Gaskets. Fits 16 Or 24 On Center Stud Frame Construction Garage Walls. This Kit Will Hang Two Freedom Top Panels And Two Full Hard Doors. For Full Steel Doors And Two Freedom Panels;mounts To Wall Studs;holds A Pair Of Doors



    Manufacturer: Teraflex
    ID: 1830702
    Category: Exterior Parts , amp, Car Care , Fender Flares, gt, doors , amp, Door Accessories, gt, door Storage
    SKU: Ter1830702




Tuffy Security Glove Box (black) - 149-01
    Tuffy Security Glove Box (black) - 149-01.

    This 16 Gauge Steel, High Security Glove Box Is An Ideal Replacement For The Plastic Factory Glove Box. The Glove Box Can Be Used To Secure A Number Of Smaller Items. Tuffys Patented Latch System Allows The Glovebox To Be Latched Shut Without Having To Be Locked And Unlocked Each Time It Is Accessed. No Drilling Required. Security Glove Box;black;two Point Welded;1/2 Inch Solid Steel Striker;patented Pry-guard Ii Locking System With A 1/4 Inch Steel Latch Which Enables The Door To Be Latched Closed Without Locking;patented Anti-twist Push Button Lock System With A 10 Tumbler Double Bitted Security Key Containing Built In Weather Seals;factory Grab Handle Remains Installed;finger Pull Lever Included;mounting Hardware Provided;durable Textured Powdercoat Finish



    Manufacturer: Tuffy
    ID: 149-01
    Category: Interior, gt, storage , amp, Organizers, gt, glove Box
    SKU: Tfy149-01




Warrior Rocker Panel Side Plates (polished Aluminum) - 906pa
    Warrior Rocker Panel Side Plates (polished Aluminum) - 906pa.

    Protect Those Exposed Side Rocker Panels With These Heavy Duty Diamond Plate Side Plates From Warrior Products. Available With Or Without The 1 Lip That Wraps Under The Body Tub And In Polished Aluminum Or Black Powder Coat. Rivets Are Included For Mounting. The Image Is For Illustrative Purposes Only. Polished Aluminum;without Lip That Wraps Under The Body Tub;sold As A Pair



    Manufacturer: Warrior
    ID: 906pa
    Category: Exterior Parts , amp, Car Care , Fender Flares, gt, body Styling, gt, rocker Panel Molding
    SKU: W/i906pa




Xd Wheels Xd795 Hoss, 17x9 With 5 On 5 Bolt Pattern - Black-xd79579050318
    Xd Wheels Xd795 Hoss, 17x9 With 5 On 5 Bolt Pattern - Black-xd79579050318.

    The Revolution Is On...the New Styling And Technology Of Off-road Designs. Xd Series Wheels Feature The Kmc Reinforcement Ring. Look No Further For Quality And Stunning Style, Xd Series Wheels Are The Perfect Choice For Your Jeep. Wheel Size: 17x9;5 On 5 Bolt Pattern;offset: 18;backspace: 5.71;max Load: 2200;finish: Black



    Manufacturer: Xd Wheels
    ID: Xd79579050318
    Category: Tires , amp, Wheels, gt, wheels
    SKU: W/pxd79579050318




Westin Signature Series Wheel To Wheel Length Round Step Bars (black) - 25-0975
    Westin Signature Series Wheel To Wheel Length Round Step Bars (black) - 25-0975.

    Westin Signature Series 3 Inch Round Nerf Bars Are Made Of 3 Inch Diameter Round Tubing And Are Vehicle Specific Designs. Step Design And Mounting Technique Varies By Application (mounting Kit Included). Unique To The Signature Series, Each Application Is Offered In A Chrome Finish And Made Out Of Mild Steel Or In A Black Powder Coat Finish And Made Of Galvanized Mild Steel. Black;recessed Step Area;3 Inch Tube;galvanized Mild Steel;5-year Warranty;sold As A Pair



    Manufacturer: Westin
    ID: 25-0975
    Category: Side Steps , amp, Running Boards, gt, nerf Bars , amp, Steps, gt, step Nerf Bar
    SKU: Wes25-0975






Auto Parts | Brake | Steering | Auto | Ignition | Belts | Engine | Fuel | Vehicle
Copyright © 2024 MotorHolder.com All rights reserved.
With any using link to MotorHolder.com strongly required.