This Unique Locking Differential Has Two Operation Modes. The First Is An Open Differential Mode For Smooth Street Driving. The Second Mode Is A Full Spool Mode To Provide You With The Maximum Available Traction. This Differential Goes From Open To Lock With The Flick Of A Switch. This Differential Includes A Forged Differential Cover With An Integral Air Cylinder For Smooth And Reliable Operation And Serviceability. All Components Are Fully Machined Here In The U.s.a. Requires Use Of External Air Source Not Included. For Use With 35 Spline Axle Shafts;for Use With 4.10 And Down Gears;requires Use Of External Source Not Included;includes Differential Cover With Integral Air Cylinder

Afe Power Is Proud To Introduce The All New Glide Guard On-board Compressor & Tank Mount. The Glide Guard Comes Powder-coated In A Matte Black Finish With Counter-sunk Compressor &a Mp; Tank Mounting Holes For Protection. Once The Required Afe Left Side Exit Exhaust System (sold Separately) Is Installed, The Skid Plate Mounts Neatly In The Former Factory Muffler Location Tucking Your Air Compressor And Tank As High As Possible (air Compressor And Tank Not Included). The Glide Guard Is Constructed Out Of 3/16 Thick Steel To Withstand Extreme Off-road Conditions. This System Bolts In Utilizing Factory Locations And An Additional 4 Drilled Holes With Heavy-duty Nut Plates For A Hassle-free Install. Notes: This Glide Guard Mount Requires The Installation Of An Afe Hi-tuck Rb (rock Basher) Exhaust System (p/n: 49-08040/41 Or 49-46231/32). It Does Not Fit With The Factory Exhaust System. These Systems Relocate The Muffler To A Forward Position, Where It Is Less Vulnerable To Off Road Damage And Add Additional Power & Performance To Your Jeep. While The Glide Guard Is Designed To Fit With Most Aftermarket Suspensions, Some Aftermarket Rear Suspension Systems (ie; Coil-over Conversion) And /or Swa Bar Setups May Interfere With Fitment. 4-door Models;constructed Of 3/16 Inch Thick Steel For Strength And Rigidity;matte Black Powdercoat;counter-sunk Compressor / Tank Mounting Holes;hi-tuck Design;utilizes Factory Attachment Points (rear Trailer Hitch Bolts);minor Drilling For Simple Installation;designed For Arb Compressor;does Not Work With Factory Exhaust Systems

Unique And Universal Designs Have Been Developed To Transform Truck And Suv Stock Hoods Into Simulated Performance Hood S, Providing A High-performance Style Without The High Performance Cost. These Are Manufactured With A Heat-resistant, Uv-protected Tri-flex Abs Thermoplastic Material To Allow For Maximum Strength And Flexibility, With No Chalking. The Finish Is A Smooth Black With Chrome Trim Accents That Are Paint-ready, And Is Easily Adhered To The Hood With 3m Automotive Tape. Unique And Customizable Designs;heat-resistant, Durablw Tri-flex Abs Thermoplastic That Is Uv-protected To Eliminate Chalking;easy No-drill Installation - Adheres To Hood With 3m Automotive Tape;made In The U.s.a;limited Lifetime Warranty

Protect The Lenses And Add Some Style With Our New Tail Light Covers. They Install Easily Over The Existing Lenses With New Hardware Provided. Machined From 6061-t6 For Strength And Durability. Made In The Usa And Available In Three Finishes; Black Powder Coat, Chrome, And Polished. Sold As A Pair. 2 And 4-door Models;black;6061-t6 Aluminum;added Style;custom Look;easy Installation;sold As A Couple

Laser Cut From High Strength Steel And Precision Formed On A Cnc Press Brake. This Bumper Is Not Made From Simple Box Tube. The Bumper Body Is Constructed From 3/16 Thick Steel And Measures 53 Wide To The Ends. The Internal Structure Of The Bumper Is Made From 1/4 Plate. It Bolts Into The 8 Factory Bolt Holes On The Rear Of The Jeep And Also Bolts To 2 Factory Bolt Holes On The Bottom Of The Frame. Btf Logo Laser Cut Into Each End Of The Bumper. No Drilling Is Required To Install This Bumper. The Bumper Is Shipped In Bare Metal. Bare Steel;constructed From 3/16 Inch Thick Steel;measures 53 Inch Wide To The Ends;no Drilling Is Required To Install This Bumper;btf Logo Laser Cut Into Sold Individually End Of The Bumper

The Trektop Nx Plus Brings A Tight, Clean Fabric Soft Top Look To Your 2-door Jeep. Run It As A Fully-enclosed, All-season Soft Top For Protection From The Elements Or Remove The Sides And Rear Window And Enjoy It As A Bikini Allowing You To Feel The Breeze As You Experience Your Outdoor Adventure. Zippered Pockets Above The Driver And Passenger Provides For Organization Of Small Gear Items. Zipperless Technology Allows For An Improved Fit And Easier Installation. Use Of The Tailgate Bar And Clips Allows For Hassle-free Opening Of The Tailgate. This Improvement On The Best-selling Trketop Nx Is A Step-up In Fit, Quality And Durability. Pebble Beige;tinted Windows;run It As A Fully-enclosed, All-season Soft Top Or Remove The Sides And Rear Window And Enjoy It As A Bikini;easier-than-ever Access To Sunshine With The Sunrider Design Which Allows The Top To Open From Inside The Vehicle;hybrid Zipper/zipperless Design Utilizes Patented Zipperless Technopogy To Allow For Easy Removal Of Window Panel While Zippers On Rear Panel Provide Security And Easy Changes In Configuration;works With All Factory Half And Full Steel Doors As Well As Bestop Door Kits (sold Separately)

The Lg1 Racing Seat Is A Consume R Favorite When It Comes To Comfort. The Second You Sit In This Seat You Desire See Why So Many Customers Are Ranting And Raving About This Seat. Its Unique Curves And Contours Re-define Comfort. Whether On Street, The Track, Or Off-road, The Lg1 Racing Seat Will Enhance Your Overall Driving Experience. As A Rule Of Thumb, The Lg1 Will Fit Up To A 38-inch Waist, While The Lg1 Wide Will Fit Up To A 42-inch Waist. High Wear Patches Are Strategically Placed To Protect Your Seat From Abuse In The High Wear Areas. The Lg1 Racing Seat Is Available In Cloth, With Leatherette High Wear Patches, Micro Suede, With Leather High Wear Patches, And 100% Black Leather. Sold As A Pair;lg1;black Leather;infinite Recline Positions;bolster Support;harness Capability;injection Molded Foam;100% Automotive Grade Leather;steel Frame;requires Additional Mounting Brackets For Your Application

For Over 50 Years, Crown Automotive Has Been The Leading Manufacturer And Distributor Of Replacement Parts For Jeep Vegicles. With Over 8,000 Different Part Numbers, Including Many Factory-discontinued Ite Ms, We Offer You Exceptional Quality That Is Only Matched By An Exceptional Warranty. Ax15 Transmission;25 Teeth;measures 2-1/2 Inch Outside Diameter And 1-1/2 Inch Thick

For Over 50 Years, Crown Automotive Has Been The Leading Manufacturer And Distributor Of Replacement Parts For Jeep Vehicles. With Over 8,000 Different Part Numbers, Including Many Factory-discontinued Items, We Offer You Exceptional Quality That Is Only Matched By An Exceptional Warranty. 2.5l Engine;oval Style

Reduce Engine Temperature With These Rugged, Easy-to-install Hood Vents. Customize Your Jeep Wrangler With These Stylish, Easy-to-install Hood Vents. With A Few Simple Tools, And Using The Vent Template (supplied) You Can Take Your Jeep From Mellow To Mean Machine In Minutes. So Let The Hot Air Out From Under Your Hood And Inject Some Style Into Your Ride With These Hard Poly Black Vents. Like All Daystar Products These Are Made In The Usa, And Features A No Questions Asked Lifetime Warranty. 2 And 4-door Models;reduces Under Hood Temperatures;structural Integrity Of The Hood Remains Intact;templates Provided For Precise Installation;under Hood Insulation Is Retained;sold As A Pair

Drawtite Class Ii Light Duty Receiver Hitches Are Built Using All Welded Construction For Maximum Strength And Built To Fit Your Specific Vehicle. All Drawtite Hitches Are Backed By A Nation Wide Lifetime Warranty For Piece Of Mind. Class Ii;frame;trailer Hitch;rear;3500 Lbs. Gtw;300 Lbs. Tongue Weight;incl. Ball Mount/pin/clip;install Time 15 Min.;no Drilling Required

Firestone Air Compressors Are Available In Standard And Heavy Duty Styles. All Firestones Air Compressors Are Direct Drive Units That Contain No Oil Or Belts. This Means Your Compressor Can Be Mounted In Any Position Without Effecting The Compressors Performance. Firestone Air Compressor And Gaage Kits Offer The Broadest Variety Of Air Fill Accessories Available On The Market Today. Voltage: 12 Volt;outlet Fitting Size: 1/8 Npt;max Air Pressure: 150 Psi;duty Cycle:15%;amp Draw: 18 Amps

Jcroffroad Has Strived To Be The Common Off-roaders Friend! They Provide A High Quality Product That Will Not Break The Bank. As Wheelers, They Know You Want To Spent Your Extra Money Getting Out On The Trails And With Their Product Line, They Aim To Help Keep As Much Of Your Hard Earned Cash Lining Your Own Pocket! 1-3/4 Inch Round Tubing;roughly 32 Inch Wide By 13 Inch Tall;same Center Hoop Used On Swb Crusader And Vanguard Bumpers;includes Jcroff-road Sticker;hand Built In The Usa;mfg Sku: Diy-hp3213

Jcroffroads Axle Truss Kit Allows For Reinforcement Of The Factory Axle Housing. 2 And 4-door Models;made Front 3/16 Inch Steel;weld On Installation;made In The U.s.a;mfg Sku: Jkr-truss-44

A 31 Spare Tire May Rub On This Bumper When Opening And Closing. A 30 Tire Shouldn't Give You Any Problems. The Plastic End Caps Are Not Included. Part Number 5105 Rear Passenger Side And 5104 Rear Driver Side. Why Buy Kentrol Stainless Steel? Because It Is The Best! Not All Stainless Steel Products Are Created Equal. Kentrol Products Are Constructed Of Virgin Metal, 304 Surgical, Stainless Steel. This Stuff Just Will Not Rust! It Is Easy To Care For Too - An Occasional Waxing Will Keep The Mirror-oike Shine Looking Brand New. And To Top It Off - All Kentrol Products Come Complete With Stainless Steel Hardware. Stainless Steel;plastic End Caps Are Not Included;includes Hardware;31 Inch Spare Tire May Rub On This Bumper When Opening And Closing

Our Original Console, The Perfect Mixture Of Strength, Convenience, And Good Looks, The Max-bilt Command Center Console Is The Ultimate Centerpiece For Your Cj, Yj, Bronco, Blazer, Or Any Vehicle With 8.5 Inches Of Space Between The Seats Or More. What Makes Our Command Center Console So Special? One Word. Lights! Did That Little Light Bulb In Your Head Just Utrn On? Just Imagine A World Where You Will No Longer Need That Flashlight Duct Taped To Your Roll Bar. Oh And It Gets Better; No More Will You Need To Use Your Cell Phone To Light The Inside Of Your Console. The Max-bilt Command Center Console Features Led Lighting Both Inside And Out. The Heavy-duty, 16 Gauge Steel Construction And Max-duty Cam Lock Gives You The Comfort Of Knowing Your Gear In The Console Is Safe And Secure When The Top Is Down. Extra-large, Removable Cup Holders Will Hold Your 20 Oz. Water Bottle In Plsce, Even On A Bumpy Off-road Ride. Dimensions: 8 1/2 Inch Wide X 23 3/4 Inch Long X 13 1/2 Inch Tall With Automatic Or Manual Transmission;8-1/2 Inch Wide;black Powder Coat;max-duty Cam Lock Keeps The Lid Sealed Tight;interior Lights For The Console And Interior Of Jeep;two 20 Amp Auxiliary Switches;marine Grade 12 Volt Power Socket

These High Power Ignition Boxes When Combined With Special Coils, Will Add Power And Economy By Providing A Hotter More Powerful Spark To Ignite Fuel More Efficiently. 6 Pin Weather Tight Connector

This Timing Kit From Omix-ada Includes A Crankshaft Sprocket, Timing Chain, Timing Chain Tensioner, And Timing Chain Guide. 5.7l Engine With Variable Valve Timing;factory Style Replacement;direct Limited 5-year Warranty

The Power Stop 1-click Oe Replacement Brake Kits Include Brake Rotors And Matching Ceramic Pads At Reduced Savings Over Standard Cross-drilled Kits. The 1-click Units Match The Correct Pad And Rotor Combination For Faster And Safer Stopping. They Include Power Stop Evolution Ceramic Brake Pads To Provide More Brake Pad Bite Without Noise Or Dust. Power Stop 1-click Daily Driver Brake Kits;front;incl. Oe Replacement Rotors W/z16 Ceramic Scorched Brake Pads

The Original Led Light Bar - The Rigid Industries E-series Was The First Projected Led Light Bar. Since Its Introduction In 2006, The E-series Light Bar Has Set The Standard In The Industry Through Continuing Advances In Technology And Superior Engineering. Available In A Wide Range Of Lengths And Configurations, Our Flsgship Is The Light Bar Of Choice For Everything From Light Truck / Car Applications And Vehicle Race Teams To Farming Equipment And Police / Fire Rescue Vehicles. The E-series Light Bar Is Designed To Project Light At Extreme Ddistances While Consuming Very Little Power. It Features An Extruded Aluminum Housing And Polycarbonate Lens That Is Sealed Against The Elements To Provide Years Of Trouble-free Operation. E-series;amber Led Light Bar;hybrid - Spot;30 Watts

Rock Krawler Suspension Is The Premier Jeep Suspension Manufacturer. Being A True Made In The U.s.a. Company And Take Pride In All Of The Components That Leave Their Doors. They Are Also The North Easts Premier Up-fitter For Jeeps. Over Their Many Years In Business, They Have Built Many Show Quality Jeeps And Also Purpose Built Competition Rigs. 4 Inch Stretch;long Travel Multi Rate Coil Springs;allows 33 Inch Tire With Stock Fenders;independent Front 3 Link;triangulated Rear 4 Link;upgradable To Coilovers;includes Emulsion Shocks;lifetime Warranty

Special Design Actually Contours The Rear Tail Light Of Your Jk Wrangler. Custom Fit To Install Directly Into Factory Mounting Points For Ease Of Installation And Secure Attachments. Constructed Of Durable Powder Coat Painted Steel Or Polished 304 Stainless Steel For Long Life And Great Looks. Rubber Inserts Arround The Mounting Screws Keep The Metal Euro Guard Off The Tail Light-prevents Scratching And Rattles. 2 And 4-door Models;stainless Steel;sold As A Pair

The Last Thing You Want On A Trail Ride Is To Damage The Drivetrain That Keeps Your Jeep Moving. Rugged Ridge Designed It To Protect Both The Engine And Transmission On Dana 30 And Dana 44 Equipped 12-13 Jeep Wranglers. This Skid Plate Is A Must For Those Who Want That Extra Protection On Their Off Road Adventures. Made Of 3/16 Powder Coated Steel With Rust Resistant E-coating, This Skid Plate Is Designed To Take Whatever The Trail Throws At You! Bolt-on Installatiion Using Existing Frame Mounting Locations. 2.5 Or More Of Lift Required To Prevent Drive Shaft Rubbi Ng. 2 And 4-door Models;3.6l 6 Cylinder Engines;3/16 Inch Black Powdercoated Steel;use On Lifted Jks Only;dana 30 And Dana 44 Front Axles;2.5 Inch Lift Is Recommended For Proper Clearance;bolt-on Installation Using Existing Frame Mounting Locations

Want More Horsepower, Better Throttle Response, And Improved Acceleration? A Rugged Ridge Air Intake System Can Boost Your Performance, While Helping You Keep Extra Cash In Your Wallet. Our Polished Aluminum Mandrel Bent Intake Tube Replaces The Restrictive Factory Air Box To Help Improve Fuel Economy And Performance. A Black Powder Coated Heat Shield Separates The Filter From Engine Heat, Dirt And Debris, As Cold Air Is Drawn Through A High-flow Conical Air Filter. Unlike Other Reusable Air Filters, Our Dry Panel Design Never Needs Oiling, Which Keeps Your Air Flow Sensor From Being Damaged By Excess Oil! The Simple Bolt On Installation Gives You Power You Can Feel, Adding Up To 10hp And 12ft Lbs. Or Torque, Depending On Application. Polished Mandrel Bent 6063 Aluminum Air Intake Tube;simple No-drill Installation Bolts On Using Simple Hand Tools;includes A High-flow Conical Dry Panel Filter That Never Needs Oiling;intakes Kit Black Powdercoated Heat Shield;49 State Legal Not For Sale Or Use In Ca

The Teraflex Disc Brake Kit Comes Complete With Emergency Brake Cables. Rubber Flex Lines, Calipers, Internal Emergency Brake Mechanism, Rotor With Dual Wheel Lug Pattern For More Wheel Options. Disc Brake Kit;rear;incl. Emergency Brake Cables;rubber Flex Lines;calipers;internal Emergency Brake Mechanism;rotor W/dual Wheel Lug Pattern