Omix-ada Replacement Steel Fender - 12042.02
    Omix-ada Replacement Steel Fender - 12042.02.

    Direct Oe Replacement Jeep Parts And Accessories Built To The Original Specifications By Omix-ada. Limited Five Year Manufacturers Warranty. Replacement Steel Body Parts Are Sold As Is. Some Minor Imperfections Or Damage Can Occur During Shipping. Professional Installation Recommended. Claims For Freight Damage Must Be Placed Directly With Freight Carriers. Black Primer;driver Side;minor Body Work May Need Completed For Replacement Steel Fender



    Manufacturer: Omix-ada
    ID: 12042.02
    Category: Replacement Exterior Parts, gt, replacement Body Parts, gt, cj2a, 3a And 3b Replacement Parts
    SKU: Oai12042.02




Artec 14 Bolt Rear Modular Truss - Tr1405
    Artec 14 Bolt Rear Modular Truss - Tr1405.

    Perfect For That One-ton Swap In The Back Of Your Tj Or Yj, The 14 Bolt Modular Axle Truss Is The Most Versatile Truss Available For The Popular 14 Bolt Axle. This Heavy Duty Truss System Is Designed To Take Serious Abuse And Reinforce Your Axle While Also Providing A Flat Surface To Mount Your Upper Links. The 3/8 Thick Truss Top And 1/4 Thick Gussets Incorporates A Unique Design To Strengthen Both The Axle And The Link Mounting Surface. This Truss Is Available By Itself, But You Can Add-on Our Leaf Spring Perches Designed For Use With A Yj Wrangler Or Coil Spring Perches Designed For Rear Tj Wrangler Coil Springs. Regardless Of Your Choice, We Offer Our New High Clearance Shock Mounts. These Place The Lower Shock Mounts Either In Front Or Behind The Axle In The Lowest Mounting Position Possiblew Ithout Giving Up Ground Clearance. These Items Are All Available For Purchase Separately. This Kit Requires General Welding And Fabrication Skills. Made From 3/8 Inch An D 1/4 Inch Thick Mild Steel;reinforced Truss For Maximum Strength;bare Steel



    Manufacturer: Artec Industries
    ID: Tr1405
    Category: Fabrication , amp, Tools, gt, brackets, Gussets , amp, Tabs, gt, axle Truss
    SKU: A/itr1405




Artec Ultimate Dana 60 Double Ended High Steer Arm - Hs6030p
    Artec Ultimate Dana 60 Double Ended High Steer Arm - Hs6030p.

    Whether You Are Just Starting Out With Crossover Steering Or Going Full Hydro, These Arms Are Meant To Handle It All And Give You Options As Well! Paired With Our Optional Knuckle Bolt Kit (sold Separately), The Exclusive Design Of These Arms Not Only Allow You To Set How You Attach Your Steering Links But Where As Well And Increase Overall Knuckle And Steering Strength At The Same Time. Rather Than Use The Factory Kingpin Springs, The Knuckle Is Held Together With A Springless Design That Uses A Set Screw To Adjust The Torque Required To Hold Together. This Eliminates Some Of The Slop That Is Commonly Found In Axles That Receive Moderate Off-road Abuse. The Hardware For A Springless Conversion Is Included And Consists Of A 3/4 Set Screw, Jam Nut, Grease Zerk, .250 Thick Load Washer, And Upper Kingpin Bushing For Each Arm. Studs And Nuts Are Not Included And Are Available For Purchase Separately. Please Note: Wheels With Extremely Large Backspacing Should Not Be Used In Conjunction With This High Steer Arm. These Arms Have Been Confirmed To Fit 17, 4.75 Backspaced Wheels. Will Not Work With Factory Backspaced H1 Wheels. The Bulge On The Side Of The Arm Measures 1.25 From The Spindle Mounting Surface. Please Confirm You Have Adequate Space Between Arms And Wheels/tires Before Purchasing. Image Is For Illustrative Purposes, You Will Receive A 5 Bolt High Steer Arm. Passenger Side;fits 5 Hole Oem And Reid Dana 60 Knuckles;clear Zinc Plated;machined Black To Allow Customizable Tie Rod Location;proper 9 Degree Angle To Compensate For Knuckle Kingpin Inclination;springless Designcnc Machined From 1.25 Inch Thick 1018 Cold Rolled Steel;grease Zerk Fitting For Kingpin Lubrication;sold Individually



    Manufacturer: Artec Industries
    ID: Hs6030p
    Category: Brakes , amp, Steering, gt, performance Steering Upgrades, gt, steering Arm
    SKU: A/ihs6030p




Auto Meter Sport-comp Pc Oil Pressure Gauge - 3652
    Auto Meter Sport-comp Pc Oil Pressure Gauge - 3652.

    Auto Meters Sport-comp Series Of Gauges A Black Dial With White Letters And A Bright Orange Pointer. The Silver Anodized Bezel Gives A Competition Look That Auto Meter Is Known For. Oil Pressure Gauge;0 - 100 Psi;8 Ft. Wiring Harness;full Sweep



    Manufacturer: Auto Meter
    ID: 3652
    Category: Performance Parts, gt, engine Oiling System, gt, engine Oil Pressure Gauge
    SKU: Amg3652




Arb Jeep Jk Wrangler Rockbar Rear Bumper (black) - 5650200
    Arb Jeep Jk Wrangler Rockbar Rear Bumper (black) - 5650200.

    Rockbars Are Manufactured With Todays Latest Technology: Computer Designing, Laser-cut Components, Mandrel Bending And Clean Quality Welds. The Mounting System Is Engineered To Each Specific Vehicle Rather Than The More Commonly Found Universal Approach. This Ensures Uncompromised Vehicle Protection As Well As Proper Strength For Winching. Dual Hi-lift Jacking Points;low Slip Tread Plate-easy Access To Cargo Area Through Center Recess;durable Black Powdercoat Finish;compatible With Factory Tow Package;integrated Tow Points



    Manufacturer: Arb 4x4 Accessories
    ID: 550200
    Category: Bumpers, Tire Carriers , amp, Winch Mounts, gt, rear Bumpers
    SKU: Arb5650200




Atk Cylinder Head (natural) - 2a34
    Atk Cylinder Head (natural) - 2a34.

    When You Purchase An Atk Cylinder Head You Can Rest Assured That You Are Buying Something That Is Better Than New Quality. Why Does Atk Have Better Than New Quality? Every Head That Atk Remanufctures Is Reverse Engineered To Ensure That Any Original Factory Defects Are Removed, Saving You Time And Money And Keeping Your Jeep On The Road And Out Of The Shop.*retail Price Does Not Include The Manufacturer Core Charge. A Sales Rep Will Contact You When Your Order Is Received Regarding The Core Charge And Availability. 4.0l 6 Cylinder Engines;head Cas T#0331;complete With Valves And Springs;core Charge Added Till Core Returned;head Gasket Sold Separately



    Manufacturer: Atk North America
    ID: 2a34
    Category: Performance Parts, gt, engines , amp, Assemblies, gt, engine Cylinder Head
    SKU: Atk2a34




Bushwacker Jeep Jk Wrangler Fender Flare Set 10919-07 - Flat Style
    Bushwacker Jeep Jk Wrangler Fender Flare Set 10919-07 - Flat Style.

    Be Ready For Anything - Equip Your Jeep Wrangler With Bushwacker Flat Style Fender Flares. They Are The First And Only Flat Style Flares Made To Absorb Impact, Using Our Proprietary Du Ra-flex 2000 Tpo - The Thickest, Most Flexible Material Available. Flat Style Fender Flares Maximize Your Tire Coverage And Wheel Articulation For Severe Off-road Use. Yet They Are Carefully Engineered To Install With A Minimum Of Extra Tools And Bodywork (see The Installation Guide For Your Specific Vehicle For Details). Foor Example, Our Mounting Brackets Bolt Straight Onto Your Jeep For Added Strength And Simpler Fitting. Our Design Integrates Neatly With The Factory Rocker Guards, And Incorporates Dot-compliant Led Side Marker Lights And Fully Molded Wheel Well Protection. The Flares Are 100% Uv Protected, Too, To Stop Chalking In Its Tracks. If You Want The Look - And The Real-world Performance - That Best Fits An American Icon, Nothing Goes With Your Jeep Better Than Bushwacker Flat Style Fender Flares. 2-door Modelsfront And Rear Flares;adds Up To 9.5 Inch Of Tire Coverage From Debris;installs Easily With No Drilling Or Cutting;provides Oe Tire Coverage Required By Most State Laws;includes Dot-compliant Led Marker Light;oem Matte Black



    Manufacturer: Bushwacker
    ID: 10919-07
    Category: Exterior Parts , amp, Car Care , Fender Flares, gt, fenders , amp, Flares, gt, jeep Fender Flares
    SKU: B/w10919-07




Bedrug Bedtred Floor Kit (charcoal) - Btjk07f2
    Bedrug Bedtred Floor Kit (charcoal) - Btjk07f2.

    This Fully Custom-molded Die Cut System Provides A Rugged Spray-in Look In Minutes Without The Need Of Any Labor Intensive Prepping Or Removal Of Seat Brackets Or Center Console. Sold As A Separate Front And Rear Kits, Individual Pieces Can Be Quickly Reomved An D Hosed Off After A Long Day On The Trail If Desired. The Bedtred Material Is 100% Waterproof, Will Not Absorb Water, And Will Never Stain, Stink, Mold Or Mildeew; Dries Quickly And Resists All Harsh Chemicals. The 1/4-inch Thick 100% Polypropylene Foam Insulates Your Interior From Road Noise And Heat. Bedrug Does Not Recommend Additional Mats And Liners Because The Nibs On The Back Of Mats Or Liners Will Not Grip, But Rather Slide On The Bedtred Material. 2-door Models;3 Piece Front;includes Heat Shields;100% Polypropylene Waterproof Spray-in Look;uv And Fade Resistant;quick And Easy Installation;3-year Warranty;installs In An Hour;hook And Loop Fasteners (velcro);made In The U.s.a



    Manufacturer: Bedrrug
    ID: Btjk07f2
    Category: Interior, gt, carlet Kits , amp, Sound Deadening, gt, floor Carpet
    SKU: Bedbtjk07f2




Borgeson Steering Heavy-duty Upper Steering Shaft With Vibration Damper - 872
    Borgeson Steering Heavy-duty Upper Steering Shaft With Vibration Damper - 872.

    By Now, The Miles, Big Tires, Or All The Off-roading You Have Done With Your Tj Has Left The Steering With That A Little To Be Desired Feel. Borgeson Now Has Just What You Have Been Waiting For! By Incorporating Their Famous Zero Radial Play U-joints That Require No Maintenance And Heavy Duty Telescopic Shafts, These Upper And Lower Tj Steering Shafts Make Your Tj Handle Tighter Both On And Off Road. The Upper Shafts Include An Airtight Firewall Seal And Can Accommodate Up To A 3 Body Lift. A Vibration Reducing U-joint Combination And Clamp Style Coupler Is Included With Every Shaft. Five-year Limited Warranty. Zero Radial Play U-joints;heavy-duty Telescopic Sahfts;vibration Reducing U-joint



    Manufacturer: Borgeson Steering
    ID: 000872
    Category: Brakes , amp, Steering, gt, performance Steering Upgrades, gt, steering Shaft
    SKU: Buc000872




Crown Automotive Body Mount Master Kit (black) - 55176180mk
    Crown Automotive Body Mount Master Kit (black) - 55176180mk.

    Includes: Upper And Lower Grille Mount Bushings, Grille Mount Retainer, Upper And Lower Body Mount Bushings, Body Mount Retainers And Bolts.



    Manufacturer: Crown Automotive
    ID: 55176180mk
    Category: Replacement Exterior Parts, gt, replacement Body Parts, gt, tj Wrangler Body Parts
    SKU: Cro55176180mk




Crown Automotive Connecting Rod Bearing Set - 68029429k
    Crown Automotive Connecting Rod Bearing Set - 68029429k.

    For Over 50 Years, Crown Automotive Has Been The Leading Manufacturer And Distributor Of Replacement Partts For Jeep Vehicles. With Over 8,000 Different Part Numbers, Including Many Factory-discontinued Items, We Offer You Exceptional Quality That Is Only Matched By An Exceptional Warranty. 5.7l Engine;standard Set Of 8 Pairs



    Manufacturer: Crown Automotive
    ID: 68029429k
    Category: Replacement Under Hood Parts, gt, replacement Engine Parts, gt, mj Comanche 4, 0l 6 Cylinder Engine
    SKU: Cro68029429k




Dorman Replacement Tail Light - 1611643
    Dorman Replacement Tail Light - 1611643.

    Dormans Comprehensive Line Lighting Components Includes Headlights, Side Marker Lights, Tail Lights And More! All Dormans Lighting Components Are Direct Replacements For A Proper Fit. 2 And 4-door Models;passenger Side;replacement Helps You Pass State Inspection And Avoid Tickets And Fines;wiring Harness Included (where Applicable);no Special Tools Required;manufactured To Strict Engineering Quality Standards



    Manufacturer: Dorman
    ID: 16111643
    Category: Replacement Exterior Parts, gt, replacement Lighting Parts, gt, jk Wrangler Lighting
    SKU: Dor1611643




Flex-a-lite Translife Transmission Oil Cooler Kit - 41166jk
    Flex-a-lite Translife Transmission Oil Cooler Kit - 41166jk.

    This Is A Direct-fit Translife Transmission Oil Cooler Kit With -6 An Fittings For The '07-'13 Jeep Wrangler (jk). The Translife Cooler Provides Additional Cooling To Protect Your Transmission, Using Turbulators Inside The Tubes For Superior Heat Transfer. Tests Have Proven That A 20 Degree Drop In Transmission Fluid Temperature Can Double The Life Of Automatic Transmission Components. Cooler Transmission Oil Gives More Reliable, Consistent Shifts Under Racing Conditions And Prevents Transmission Damage. 2 And 4-door Models;direct Includes: Ccooler,-6an Made In The Usa



    Manufacturer: Flex-a-lite
    ID: 41166jk
    Category: Heating , amp, Cooling, gt, engine , amp, Transmission Cooling, gt, auto Trans Oil Cooler
    SKU: Flx41166jk




Flex-a-lite Electric Fan Variable Speed Control Module - 33054
    Flex-a-lite Electric Fan Variable Speed Control Module - 33054.

    Allows Greater Control Over Engine Temperature, Reduces Charging Spikes And Current Load On Charging System. Directs Fan To Run For 30 Seconds After Vehicle Is Turned Off. Temperature Range: 160-220 Degrees F. Load Capacity: 25 Amps. Electric Fan Variable Speed Control Module;replacement For Pn[262/264/278/284/292/294/295/410/430/480];made In The U.s.a



    Manufacturer: Flex-a-lite
    ID: 33054
    Category: Heating , amp, Cooling, gt, engine , amp, Transmisison Cooling, gt, hvac Control Module Fan
    SKU: Flx33054




Fox Racing Shox 2.5 Bump Stop - 980-02-245
    Fox Racing Shox 2.5 Bump Stop - 980-02-245.

    Fox Has Made High Quality Shocks For 30 Years, So You Can Bet Fox Knows How To Design And Manufacture The Best Shocks You Can Buy. Fox Started Out As An Engineering Company And Things Have Not Changed. Fox Will Always Focus On Making High Performance Products Without Compromise. This Philo Sophy Doesn't Always Go Over Well With The Bean Counters, But Fox's Owner Is An Engineer - And The Boss Is Always Right! Fox Knows That Passion Is What Drives You Out On The Trails And Tracks Of This World. It Is This Passion That Pushes Fox To Make Unequalled Shocks And Suspension Products. Black And Zinc Finish;body Diameter: 2.5 Inch;travel: 3.75 Inch;shaft Size: 15/8 Inch Diameter;extended Length: 14.82 Inch;collapsed Length: 11.07



    Manufacturer: Fox Racing Shox
    ID: 980-02-245
    Category: Suspension And Shocks, gt, shock Absorbers
    SKU: Fox980-02-245




Jcroffroad Front Narrow Width Fenders (bare Metal) - Swbfx-m-tj
    Jcroffroad Front Narrow Width Fenders (bare Metal) - Swbfx-m-tj.

    At Jcroffroad They Manufacture Bumpers, Sliders, And Armor For Your Jeep. They Have A Dedication To Qyality Fabrication And Are Proud To Build Their Products In Portage, Michigan On American Made Manufacturing Equipment And They Stand Behind Their Products With A Lifetime Warranty. Cnc Cut And Formed From 3/16 Inch Steel;fully Fabricated Fenders Offer Unmatched Fit And Design;re-uses The Factory Inner Fender;replacement Inner Fenders Are Available Separately;provisions For 3/4 Inch Round Led Marker Light (lights Sold Separately);sold As A Pair;easy Bolt-on Installation;includes Mounting Hardware;made In The U.s.a



    Manufacturer: Jcroffroad
    ID: Swbfx-m-tj
    Category: Exterior Parts , amp, Car Care , Fender Flares, gt, fenders , amp, Flares, gt, tube Fenders
    SKU: Jcrswbfx-m-tj




Omix-ada 4.2l Plastic Valve Cover Kit With Cork Gasket (black) - 17401.04
    Omix-ada 4.2l Plastic Valve Cover Kit With Cork Gasket (black) - 17401.04.

    Direct Oe Replacement Jeep Parts And Accessories Built To The Original Specifications By Omix-ada. Limited Five Year Manufacturers Warranty. 4.2l 6 Cylinder Engines;plastic;with Factory Plastic Cover;includes Cork Gasket And Hardware



    Manufacturer: Omix-ada
    ID: 17401.04
    Category: Replacement Under Hood Parts, gt, replacement Engine Parts, gt, tj Wrangler 2, 5l 4 Cylinder Engine Parts
    SKU: Oai17401.04




Omix-ada T90 Internal Parts Kit - 18802.01
    Omix-ada T90 Internal Parts Kit - 18802.01.

    Direct Oe Replacement Jeep Parts And Accessories Built To The Original Specifications By Omix-ada. Limited Five Year Manufacturers Warranty. With T90 Transmission;with 4 Cylinder Engine;with 9-1/16 Inch Input Shaft;includes: Mainshaft, Input Shaft, 1st Gear, 2nd Gear, 2-3 Synchronizer Assembly, Cluster Gear And Shaft, Reverse Idler Gear With Shaft, Front And Rear Bearings, Gasket Kit And Small Parts Kit



    Manufacturer: Omix-ada
    ID: 18802.01
    Category: Replacement Drivetrain Parts, gt, replacement Transmission Parts, gt, vintage T150 Tranmission
    SKU: Oai18802.01




Go Rhino 4 Inch Oe Xtreme Plus Wheel To Wheel Side Steps (stainless Steel) - 661096ps
    Go Rhino 4 Inch Oe Xtreme Plus Wheel To Wheel Side Steps (stainless Steel) - 661096ps.

    Go Rhino! Oe Xtreme Plus Wheel To Wheel Sidesteps 4in;polished Stainless;oval;brackets Sold Separately



    Manufacturer: Go Rhino
    ID: 661096ps
    Category: Side Steps , amp, Running Boards, gt, nerf Bars , amp, Steps, gt, step Nerf Bar
    SKU: Orp661096ps




Spod Mini Bezel Kit - 600-mini-07
    Spod Mini Bezel Kit - 600-mini-07.

    2 And 4-door Models;includes 6 Installed And Pre Wired Switches;12 Position Terminal Block For Accessory Attachment;2 Piece Wire Harness Set With 8 Multi Color Leads Utilizing 18 Gauge Wires;8 Gauge Power Leads With Crimped And Soldered Terminal For Connection To The Battery;gives The Operator A Choice Of Having A Night Lighted Switch;all Wires Are Wrapped In High Temp Abrasion Resistant Nylon Braided Sleeving;no Extra Wiring Required;includes Mounting Brackets And Hardware.



    Manufacturer: Spod
    ID: 600-mini-07
    Category: Electrical, gt, electrical Components, gt, multi Purpose Switch Panel Kit
    SKU: Pod600-mini-07




Poison Spyder Defender Front Fenders (bare Steel) - 13-02-050
    Poison Spyder Defender Front Fenders (bare Steel) - 13-02-050.

    Defenders Are Fabricated Entirely From Cnc Laser-cut, Precision Brake-formed 3/16 Plate Heavy Duty P&o Steel. The Defender Has An Extra Return, Or Lip Along The Underside Of The Fender, Which Provides Better Protection From Cutting Into A Fully Stuffed Tire, While Also Lending Extra Strength To The Outer Edge Of The Fender, Where It Is Most Likely To Come In Contact With Rocks, Canyon Walls, Trees, Etc. The Defender With Negative Flare Provides The Maximum Clearance For Tire Articulation And Tight Trails. We Call It The Negative Flare Because It Actually Subtracts From The Stock Fender Width, Tapering Inward To Closely Hug The Edge Of The Jeeps Hood, Leaving Just Enough Of A Fender Edge To Mount The Hood Latch And Provide A Beefy Steel Rub Rail To Protect The Side Of The Hood. For Those Looking To Maintain A Low Center Of Gravity By Running Big Tires With Minimal Lift, The Negative Flare Is A Great Way To Allow Full Suspension Articulation While Still Having A Beefy, Armored Non-highline Fender. Why Deal With The Cost Or Hassle Of Replacing Your Existing Inner Fenders? Defenders Are Designed To Work With Your Jeeps Oe Inner Fenders, Saving Cost As Well As The Hassle Of Removal/installation/relocation Of All Of Your Under-hood Gear. Even On The Non-highline Version, The Defender Provides A Much Larger Wheel Opening Than Stock Or Some Competitors' Tube Fenders. The Back Of The Wheel Opening, Where Larger Tires Tend To Rub When The Steering Is At Full-lock, Is Approximately 2-1/2 Inch Further Back Compared To Typical Tube Fenders, And About 4 Further Back Than The Stock Jeep Flares. Shipped Unpainted And Ready To Install On Your Jeep. Bare Steel;negative Flare;made From 3/16 Inch Steel Plate;retains Inner Fender;mounting Location For A 3/4 Inch Led Marker



    Manufacturer: Poison Spyder Customs
    ID: 13-02-050
    Category: Exterior Parts , amp, Car Care , Fender Flares, gt, fenders , amp, Flares, gt, tube Fenders
    SKU: Psc13-02-050




Rigid Industries Adjustable Clamp System - 43220
    Rigid Industries Adjustable Clamp System - 43220.

    Rigid Has The Mounting System You're Looking For To Meet Your Vehicles Lighting Needs. Install Your New Rigid Leds In A Variety Of Configurations With One Of Rigids Vast Selection Of Installation Brackets, Cradle Mounts, Tube Mounts, Tab Mounts, Windshield Mounts And More. Adjustable Clamp System;pair



    Manufacturer: Rigid Industries
    ID: 43220
    Category: Lighting , amp, Lighting Accessories, gt, fog Light Brackets
    SKU: Rig43220




Teraflex 4 Inch Lift Kit With 8 Flexarms - 1156402
    Teraflex 4 Inch Lift Kit With 8 Flexarms - 1156402.

    The Teraflex Jk Suspension System With Full Flexarm System Gives You Everything That You Need To Tackle Some Serious Trails. This System Includes A Lift Kit, Shocks, Lower And Upper Flexarms, Front Swaybar Disconnects, Rear Swwaybar Links, Rear Trackbar Bracket, Bumpstops And All Necessary Hardware. The 4 Kit Will Allow You To Run Up To A 37 Tire (aftermarket Wheels With 4.5 Backspacing Or Less Are Required). Lift Height: 4 Inch;upper Flexarms;lower Flex Arms;front Coil Springs;rear Coil Springs;track Bar Brackets;extended Brake Lines;extended Sway Bar Links



    Manufacturer: Teraflex
    ID: 1156402
    Category: Suspension And Shocks, gt, suspension Lift Kits
    SKU: Ter1156402




Vision X Lighting 6 Inch Solstice Narrow Beam Solo Led Pod - 4007253
    Vision X Lighting 6 Inch Solstice Narrow Beam Solo Led Pod - 4007253.

    The Solo Xil-s6100 Series 60 Watt 6 Inch Round Off Road Lamp Producing 4800 Lumens (500 Watt Halogen Equivalent) In Only A 6 Inch Round Housing. Not Only Are They The Brightest, They Are The Most Efficient With The S1100 Drawing Only 5.00 Amps Due To Their Advanced Electronic Drivers Which Are Also Responsible For Their 50,000 Hour Life Span And Variable 9 - 50 Volt Dc Input. The Solstice Solos Main Feature Is The 4 Sided Channel Design That Allows You To Interlink It On All Four Sides With Another Solstice Solo Pod Or Other Various Available Mounting Hardware For Flat, Tube Or Even Helmet Mount Making It The Only Modular Light With The Ability To Make Any Shape Or Length. Key Features Are As Follows; Rugged Die-cast Aluminum Housing Provides Optimum Durability And Heat Dissipation. The Solstice Series Also Feature An Ip68 Ingress Protection Rated Housing Making Them Impenetrable To Dust And Submersible Under Water Up To 3 Meters. The Unbreakable Polycarbonate Lenses Are Housed By A 6061 Aluminum Face Plate Which Doubles As A Radiant Heat Sink To Melt Away Snow And Ice In Frigid Conditions. Their Stainless Steel Mounting Bracket Features Knurled Aiming Knobs For 90 Degrees Of Adjustment And Is Centered On The Profile Of The Lights Which Provides A Slim 1.5 Inch Mounting Depth. The Solstice Series Has Also Been Subjected To A 15.6grms Vibration Test To Ensure Their Performance In High Impact Conditions. Built To Last, These Vision X Lights Also Feature A Lifetime Warranty. Clear Lens;universal;black Aluminum Housing;unbreakable Polycarbonate Lens;50,000 Hour Life Expectancy;6 Inch Round;6 Leds Per Lamp;60 Watts;4800 Lumens;sold Individually



    Manufacturer: Vision X Lighting
    ID: 4007253
    Category: Lighting , amp, Lighting Accessories, gt, driving Lights
    SKU: V/x4007253




Warrior Removable Spare Tire Carrier - 201
    Warrior Removable Spare Tire Carrier - 201.

    This Carrier Has A Quick Release On/off Head In Which To Load And/or Remove The Tire. Plus, There Is An Additional Quick Release Head At Its Base That Allows The Entire Unit To Be Removed In Seconds! Constructed Of 12-gauge Steel, The Carrier Mounts To Any Flat Sheet Metal Surface, And Adjusts To Hold Up To A 44 Inch Tire Diameter. Universal;for Use With 5/6 Lug Wheels;quick Release;fits Up To 44 Inch Tire



    Manufacturer: Warrior
    ID: 201
    Category: Bumpers, Tire Carriers , amp, Winch Mounts, gt, spare Tire Carrierss
    SKU: W/i201






Auto Parts | Brake | Steering | Auto | Ignition | Belts | Engine | Fuel | Vehicle
Copyright 2018 MotorHolder.com All rights reserved.
With any using link to MotorHolder.com strongly required.