|
|
Omix-ada Oxygen Sensor - 17222.32.
Direct Oe Replacement Jeep Parts And Accessories Built To The Original Specifications By Omix-ada. Limited Five Year Manufacturers Warranty. 4.0l And 4.7l Engines;front After Catalytic Converter
Manufacturer: Omix-ada
ID: 17222.32
Category: Replacement Under Hood Parts, gt, replacement Electrical Parts, gt, kl Cherokee Electrical
SKU: Oai17222.32
|
|
|
Artec Jk 1 Ton - Front Dana 60 Swap Kit With Daystar Bushings - Jk6011.
Artec Industries Is Excited To Announce The Jk One Ton Axle Swap Kit For Front Dana 60 Axles. This Heavy Duty Truss And Bracket System Is Designed To Take Serious Abuse And Reinforce Your Entire Axle While Also Providing The Factor Y Link, Spring, Anti-sway Bar, And Shock Locations. The 1/4 Thick Truss Incorporates A Unique Design To Strengthen Both The Axle And Incorporate The Link Brackets For Ease Of Installation And Added Strength. By Incorporating The Link Mounts Into The Truss, Hours Of Work And Trial And Error Can Be Avoided When Compared To Other Bracket Systems. Simply Tack Weld The Truss Together, Place It On The Axle And All The Other Brackets Fit Into Place Exactly Where They Need To Be. The Front Dana 60 That Works With This Kit Is From Ford 3/4 And 1 Ton Trucks From Model Years 85-91.5 (kingpin) And 92-97 (ball Joint). This Truss Is Not Intended For Older Axles Due To Different Differential Offsets Or Newer Superduty Axles (kit Currently In R&d). The Easiest Way To Identify If The Axle Will Work With This Kit Is If The Axle Has 3.0 Of Driver Side Axle Tube And 24.5 Of Passenger Side Axle Tube. Please Ensure It Is A Dana 60 Because These Model Years Also Had Dana 44 Available. Due To The Larger Casting On The Dana 60 Differential, The Lower Control Arm (lca) Brackets Are Wider Than Factory Location. Modifications To Your Lower Control Arms Will Likely Be Necessary. If You Have Adjustable Arms With Flexible Style Joints (heims, Johnny Joints, Etc.), Modifications May Not Be Necessary. Upper Control Arm (uca) Brackets Are Also Slightly Higher Than Factory So Adjustable Arms May Be Necessary. Dana 60 Axles Do Not Match The Factory Jk 5 Lug Wheel Bolt Pattern. New Wheels Will Need To Be Purchased To Do This Swap. Brake And Steering Components Not Included In This Product, But Will Be Available Soon. This Will Likely Require Bumpstop Extensions And A New Tracbar Since The Steering Is Different On This Axle From Fctory Axle. The Tracbar Bracket Is Higher 2 And 4-door Models;all The Brackets Necessary To Swap Front Dana 60 Axle Into Jk;1/4 Inch Thick Mild Steel Truss And Brackets For Much Higher Strength Than The Factory Bracket And Other Afftermarket Brackets;precision Cnc Cut And Bent For Great Includes All The Brackets Necessary For A Complete Axle Swap Including Upper And Lower Control Arm Mounts, Shock Mounts, Anti-sway Bar Mounts, Tracbar Mount, And Coil Spring Mounts;save Hours Of Installation Time. Brackets Are Jigged Into Truss And Set Exact Position Automatically;;tracbar Mount Includes 4 Locations For Those Who Have Aftermarket Lifts;easily Upgradeable For Future Link Geometry Changes;truss Is Reinforced Using Interlocked 1/4 Thick Gussets For Maximum Strength And Easy Assembly
Manufacturer: Artec Industries
ID: Jk6011
Category: Fabrication , amp, Toolss, gt, brackets, Gussets , amp, Tabs, gt, axle Truss
SKU: A/ijk6011
|
|
|
Genuine Packages G.e.a.r Seat Cover Bundle (tan) - Tjtancacc.
The Ultimate Storage Solution For Your Off Road Vehicle! The G.e.a.r. Seat Cover Is A Completely New Way Of Looking At Storage For Your Off Road Needs. Each Cover Is Manufactured From 600 Denier Polyester With A Pvc Liner And Is Completely Adjustable. The G.e.a.r. Comes With Seven Different Pouches That Securely Fasten Using A Molle/pals Restraint System Which Will Not Come Loose Under The Harshest Off Road Conditions. Its Offered In Three Different Colors; Black, Coyote Tan And Olive Drab Green And Is Completely Uv Stable. Smittybilt Provides The Best In G.e.a.r For All Of Your Off Road Needs. Available In Black (01), Tan (24) And Olive Drab (31). *if You Have Side Airbags In The Seat, You Must Leave The Velcro Band Loose. Tan;includes Two Gear Seat Covers And One Tailgate Cover;7 Individual Storage Pouches Per Seat Cover;2 Large Storage Pouches Attached Tailgate Cover;600 Denier Polyester With Pvc Liner;interchangeable With Pal/molle Pouches
Manufacturer: Genuine Packages
ID: Tjtancacc
Category: Interior, gt, jeep Seat Covers
SKU: Addtjtancacc
|
|
|
Alloy Usa Dana 44 Tj Rubicon Grande Chromoly Rear Axle Shaft Kit With Arb Locker - 12137-arb.
Alloy Usa Has Combined Their High Tensile Strength Big Spline 4340 Chromoly Axles And An Arb Into One Complete Package To For A Complete Axle Upgrade In One Package. Dana 44 Jeep Tj 97-05 Grande Axle Kit;35 Spline;chromoly Axle Shafts;wheel Bearing And Seal Kits;wheel Studs;includes Arb Air Locker;compressor Sold Separately
Manufacturer: Alloy Usa
ID: 12137-arb
Category: Drivetrain , amp, Differential, gt, axle Shaft
SKU: Aly12137-arb
|
|
|
Auto Meter Phantom Electric Fuel Pressure Gauge - 5761.
Auto Meters Phantom Gauges Feature Its Bright White Dial Featuring Unique Outlined Block Letters With A Led Back Lighting Feature And Glowing Red Needle. Electric Fuel Pressure Gauge;0 - 15 Psi;8 Ft. Tubing Or Wiring Harness;full Sweep
Manufacturer: Auto Meter
ID: 5761
Category: Performance Parts, gt, gauges, gt, gauge Set
SKU: Amg5761
|
|
|
Bushwacker Jeep Xj Cherokee Front Fender Flares 10035-07 - Cut-out Style.
For Extreme Off-road Use, There Is Nothing Else Like Bushwacker Cut-out Fender Flares. Each Set Of Cut-out Fender Flares Is Individually Designed For Your Jeep Cherokee, To Maximize Off-road Wheel Travel And Maintain Adequate Tire Coverage. That Custom Approach Means A Smoother Appearance, Greater Strength, And Easier Bolt-on Installation With Tough Stainless Steel Hardware. As The Name Says, Cut-out Fender Flares Require Cutting Body Sheet Metal To Achieve Maximum Articulation And Coverage For Oversized Tires (see The Installation Guide For Your Specific Model For Complete Details). Cut-out Fender Flares Are Made From Thick, Warp-proof Dura-flex 2000 Tpo, Our Own Proprietary Material, Engineered For Added Durability And Flexibility In Severe Conditions. Its Uv Protection Guards Against Chalking, While Its Pro-grade Matte Black Finish Looks Great As-is, Or Custom Painted To Create Your Own Personal Look. Cut-out Fender Flares Offer Extreme Performance With Style To Match. Pair Of Front Flares Only;sheet Metal Removal Maximizes Wheel Articulation;oem Matte Black Finish Is Easy To Paint;100% Uv Protected Dura-flex 2000 Tpo No Chalking;made In The Usa With A Limited Lifetime Warranty;set Part # 10912-07 Or 10911-07
Manufacturer: Bushwacker
ID: 10035-07
Category: Exterior Parts , amp, Car Care , Fender Flares, gt, fenders , amp, Flares, gt, jeep Fender Flares
SKU: B/w10035-07
|
|
|
Corbeau Seat Bracket - D123t.
Corbeau Carries The Most Comprehensive Inventory Of Custom Mounting Seat Brackets In The Industry. Don't Be Fooled By Companies Claiming To Have Universal Seat Brackets For Your Vehicle. If You Want To Install Seats Correctly, And For Your Own Safety And Sanity, You Must Order A Custom Seat Bracket! The Price Shown On The Brackets Includes Sliders. In Some Cases Adapter Brackets Are Made To Adapt To Your Stock Seat Brackets. Browse Through Our List To Find The Bracket To Match Your Vehicle. Passenger Side
Manufacturer: Corbeau
ID: D123t
Category: Interior, gt, seating, gt, seat Mounting Brackets
SKU: Cbud123t
|
|
|
Drawtite Class Iii/iv Max-frame Trailer Hitch - 75712.
Drawtite Receiver Hitches Are Built Using All Welded Construction For Maximum Strength And Built To Fit Your Specific Vehicle No Adapters Used For The Strongest And Safest Receiver Hitches Available. All Drawtite Hitches Are Backed By A Nation Wide Lifetime Warranty For Piece Of Mind. Black Powder Coat;class Iii/iv;2 Inch Square Receiver Tube Opening;all Frame Attachment Points;rated Up To 3,000 Lbs. (gtw) Weight Carrying (wc);solid, All-welded Construction;custom Built Per Vehicle Application;no Drilling Required
Manufacturer: Drawtite
ID: 75712
Category: Towing, gt, hitches, gt, trailer Hitch
SKU: Dra75712
|
|
|
Ebc Brakes Stage 4 Signature Front Brkae Kit - S4kf1474.
Manufactured Using Premium Disc Blanks Mentioned Above, The Narrower Multi Slot Design Of The Ultimax Sport Rotor And The Progressive Angle At Which The Slots Are Machined Creates A Quiet Running Sport Rotor That Still Has Benefits Of Removing Gas, Dirt, Water And Debris And Maintaining Parallel Pad Wear. Ebc Have Always Been Honest Enough To Say That The Biggest Advantage Of Slotted Rotors Is The Fact That They Promote Flat And Parallel Padd Wear Rather Than Allowing Ridges To Develop On Pads And Rotors Which Is Typical Of Drilled Only Sport Rotors. By Preventing These Ridges Brakes Stay More Consistent Throughout Pad And Rotor Wear Life (simple Physics!). Includes Rotors And Pads;front;brake In Coating For Easy Brake In Period;very Little Dust;guaranteed Noise Free;stop Faster And Last Logner Than Stock Pads
Manufacturer: Ebc Brakes
ID: S4kf1474
Category: Brakes , amp, Steering, gt, disc Brake Pad And Rotor Kit
SKU: Ebcs4kf1474
|
|
|
Ten Factory Dana 30 Front Axle Kit With Arb Locker - Mg22129arb.
Original Equipment Front Axle Shafts Are Designed For Original Equipment Tire Sizes And Moderate Off Road Use. When You Upgrade Your Jeep Or 4x4, You Need To Upgrade Your Axle Shafts. Ten Factory Designs Our Front Axle Shafts To Maximize Strength And Durability, And Back Them With An Exclusive Ten-year Replacement Warranty. Ten Factory Jeep Front Axle Kit;dana 30;30 Spline;for Use In 76-81 Cj Narrow Track;includes Arb Air Locker;no Compressor Included
Manufacturer: Ten Factory
ID: Mg22129arb
Category: Drivetrain , amp, Differential, gt, axle Shaft
SKU: Midmg22129arb
|
|
|
Omix-ada Rear Floor Panel Assembly - 12008.01.
Shipped Via Truck Freight For $135.00, Standard Ground Charges Do Not Apply. Rear Floor Panel Assembly
Manufacturer: Omix-ada
ID: 12008.01
Category: Replacement Exterior Parts, gt, replacement Body Parts, gt, m38a1 And Vintage Body Parts
SKU: Oai12008.01
|
|
|
Omix-ada Liftgate Wiring Harness - 56019748.
Wiring Harness Body To Liftgate For Tailgate With Powerlocks. Omix-ada Factory Direct Fit Replacement Part.
Manufacturer: Omix-ada
ID: 56019748
Category: Bory Tubs , amp, Frames, gt, body Parts, gt, liftgate
SKU: Oai56019748
|
|
|
Piaa 9006/hb4 Led Ylelow Replacement Bulb - 17501.
Whether Your Trying To Match Oe Led Or Hid Headlights Or Just Looking For Maximum Visibility, Piaas New Led Performance Bulbs Will Give Your Vehic1ea Premium Look While Providing More Performance Compared To Your Stock Halogen Bulb. 2800k;1800 Lm;twin Pack
Manufacturer: Piaa Lighting
ID: 17501
Category: Lighting , amp, Lighting Accessories, gt, replacement Bulbs, gt, headlight Bulb
SKU: Pia17501
|
|
|
Painless Wiring Throttle Body Manifold Adapter - 60118.
Now You Can Convert From Carburetion To Throttle Body Injection Without Having To Replace Your Manifold! This Adapter From Painless Bolts On Any Square Or Spread Bore Manifold And Accepts Any 43mm Bore Throttle Body From Gm 4.3l, 5.0l, And 5.7l Engines. Convert From Carburetion To Tbi Without Having To Replace Your Manifold;this Adapter Bolts Forward Any Square Or Spread Bore Manifold;accepts Any 43 Mm Bore Throttle Body From 4.3l, 5.0l And 5.7l Gm Engines
Manufacturer: Painless Wiring
ID: 60118
Category: Performance Parts, gt, carburetors, Intake Manifolds, And Throttle Body, gt, carburetor Adapter Plate
SKU: Pwp60118
|
|
|
Rubicon Express 3.5 Inch Suspension Lift Kit Re7002.
The Standard 3.5 Suspension System Provides 3.5 Of Lift For Your Tj Or Lj At An Economical Price. This Suspension System Is Ideal For An Entry-level Vehicle Owner Or Those On A Smaller Budget. This Standard Lift System Features New Coil Springs, Bump Stops And Extended Sway Bar End Links. The Stock Control Arms, Track Bar And Other Components Are Retained. This System Will Perform Smoothly On And Off The Trail, And Is Easily Upgradeable To Either A 3.5 Or 4.5 Super-flex System. Front And Rear Replacement Coil Springs;bump Stops;rear Track Bar Bracket;extended Sway Bar End Links;easily Upgradeable To The Super-flex System;rubicon Express Advantage Lifetime Warranty
Manufacturer: Rubicon Express
ID: Re7002
Category: Suspension And Shocks, gt, suspension Lift Kits
SKU: R/ere7002
|
|
|
Rancho 4" Crawler Long Arm System - Rs66115b.
The New Rs66115b Crawler Long Arm Kit Is The Result Of Continuous Engineering Enhancements By Ranchos Research And Design Team To Give You The Best Possible On And Off-road Experience For Your Jk. The New And Improved Long Arm Kit Includes Progressive Rate Coil Springs And Fully Adjustable Extended Length Control Arms With D2 Bushings To Give You Improved Comfort, Durability And Worry Free Operation. This Kit Also Features Our New Heavy-duty Front And Rear Adjustable Track Bars With D2 Bushings To Center The Axles. The D2 Bushings Found In Our Control Arms And Track Bars Feature Pfte Teflon For Grease-free Opeeration Allowing The Sleeve To Rotate In The Bushing Without Resistance Reducing Wear. A Transmission Cross Member Rs886101 (2011-07) Or Rs886102 (2017-12) Must Also Be Ordered With This Kit To Make It Complete. Exhaust Cross Over Pipe Rs720003 Is Required For (2017-12) When Not Replacing The Front Driveshaft. The Rs66115b Supersedes Our Rs66105 And Rs66105b Kits. The Rancho Brand Offers A Limited Lifetime Warranty** For This Suspension System. Fits 2007 To 2017 Jk Wrangler, Rubicon And Unlimited;2 And 4-door Models;fits Up To 37-in. Tires;high-articulation Front And Rear Long Arm Design;heavy-duty Front And Rear Adjustable Track Bars Included;fully Adjustable Upper And Lower Control Arms With D2 Bushings;front And Rear Progressive Rate Coil Springs;100-percent Bolt-on System
Manufacturer: Rancho
ID: Rs66115b
Category: Suspension And Shocks, gt, suspension Lift Kits
SKU: Ranrs66115b
|
|
|
Rock Krawler 5.5 Rock Runner Lifft Kit With Coil Over Shocks - Jk55rnr-4s1.
The Rock Krawler 5.5 Rock Runner System Is The Ultimate Trail Suspension For Wrangler Jk Owners Period! The Steering Geometry Has Been Engineered To Provide You With Stock On Highway Handling Characteristics. What Makes This Long Arm System Stand Out Above All The Rest Is The Revolutionary Independent Three Link Conversion Front And Rear. This Has Become A Rock Krawler Suspension Trade Mark. All Rock Krawler Long Arm Systems Feature This Very Same Design Up Front. On The New Wrangler Jks They Used It In The Rear As Well So No Gas Tank Modifications Would Be Required. The Independent Three Link Has Been Proven As The Best Suspension Design For High Articulation Demands While Maintaining Precise Street Control. There Is No Limit To What You Can Do With The 3.5 Rock Runner Long Arm System. No Detail Has Been Overlooked. The Rear Features Adjustable Anti-squat So You Can Tune Your Jk For Your Off-road Pleasure. All The Lower Control Arms Are Adjustable, Have High Clearance And Are Made From 2 Solid Alloy Steel For Extreme Use. We Provide You With Even The Little Things Such As Heavy Duty Rear Lower Control Arm Mounts With Integrated Coil Over Mounts That Are Raised 2 To Improve Ground Clearance. Like All Other X Factor Mid Arm And Long Arm Systems For The Wrangler Jk, The Rear Axle Has Been Moved Back 1 To Allow For Greater Clearance Between The Tire And Factory Sliders For Rubicon Owners. The Big Bonus Of This System Is The Inclusion Of Massive Long Travel Coil Over Shocks Front And Rear! The Rrd Coil Over Assemblies Feature A True Dual Rate Coil Assembly For Improved Off-road Ability With Massive Off Camber Gains! The Adjustability Of Height Both Front And Rear Allows You To Dial In The Stance Of Your Jk Just As You Want It. Includes 2-5/8 Diameter 13 Travel Coil Overs Up Front And 2-5/8 Diameter 11 Travel Coil Overs In The Rear. 4-door Models;coilover Front And Rear Conversion;high Clearabce 2 Inch Alloy Lower Control Arms;includes 2-5/8 Inch Diameter Coilover Shocks Front And Rear;3 Link Conversion Front And Rear;includes Rock Krawler Orp Steering Setup;requires Welding To Install;made In The U.s.a;max Tire Size: 37x12.50
Manufacturer: Rock Krawler
ID: Jk55rnr-4s1
Category: Suspension And Shocks, gt, suspension Lift Kits
SKU: Rksjk55rnr-4s1
|
|
|
Rotopax 3 Gallon Gasoline Pack - Rx-3g.
Roto-molded Gas Can That Is Durable With Thicker Walls And Stronger Construction Make It Leak-proof Along With A Sure Seal Gasket To Guarantee Your Spout Wont Leak Or Vibrate Loose. Rotopax Are The Only Epa And Carb Compliant Fuel Containers Available For Sale In The United States. This Is Thanks To A Patented Three Layer Roto-molding Process, Long With Specialty Formulated Plastic Barrier Material To Meet The Governments New Extremely Low Permeability Requurements. Red;gas Container Only, Mounting Kit Sold Separately;epa And Carb Compliant;spout Included;made In The U.s.a;size: 16 L X 15 W X 4 1/2 H
Manufacturer: Rotopax
ID: Rx-3g
Category: Exterior Parts , amp, Car Care, gt, fluid Storage, gt, fuel Storage Can
SKU: Rotrx-3g
|
|
|
Crown Automotive Upper Door Frames - Df100yj.
For Over 50 Years, Crown Automotive Has Been The Leading Manufacturer And Distributor Of Replacement Parts For Jeep Vehicles. With Over 8,000 Different Part Numbers, Including Many Factory-discontinued Items, We Offer You Exceptional Quality That Is Only Matched By An Exceptional Warranty. With Half Steel Doors;sold As A Pair;frame Only - No Doorskins
Manufacturer: Rt Off-road
ID: Df100yj
Category: Exterior Parts , amp, Car Care , Fender Flarew, gt, doors , amp, Door Accessories, gt, door Frame Assembly
SKU: Rtodf100yj
|
|
|
Rugged Ridge Interior Trim Kit (silver) - 11151.97.
Make Your Jk Wrangler Unique With Rugged Ridge Interior Accents. These Injection-molded Plastic Accents Are Molded Directly From The Factory Interior Piece Sfor An Exact Fit. Installation Is A Snap, Thanks To The Preinstalled High Strength Adhesive Tape. 4-door Models;silver;manual Transmission;for Manual Windows Only
Manufacturer: Rugged Ridge
ID: 11151.97
Category: Interior, gt, interior Accessories, gt, interior Style Kit
SKU: Rug11151.97
|
|
|
Rugged Ridge All Terrain Floor Liner Kit (gray) - 14987.04.
Lifetime Warranty - Rugged Ridge Floor Liners Are Guaranteed To Weather The Elements And Climate. Other Manufacturers May Only Carry A 3, 5 Or 10 Year Warranty. Thermoplastic Material - Rugged Ridge Floor Liners Are Made Of High Pressure Injection Molded Oe-quality Thermoplastic That Looks And Feels Like Rubber, But Provides A Nonslip Surface. They Will Not Fade In The Sun & Our Proprietary Material Is Resistant To Oil, Gas And Battery Acid. Nibbed And Floor Hook - Rugged Ridge Floor Liners Take Advantage Of Factory Floor Hooks And Have Nibs On The Back Of The Liners Help Keep The Liner In Place. Raised Lip And Retaining Edges - Spills Ultimately Will Happen And Your Feet Drag Dirt, Mud, Snow Or Water Into Your Vehicle. Without A Way To Contain The Spills Or Corosive Material Your Shoes Pick Up The Mess Makes It To The Door Sill And Eventually The Carpet. Rugged Ridge Floor Liners Have A Raised Lip Retaining Edges Around Their Perimeter Of Your Floor Board To Keep The Spills And Mess Off Your Vehicles Carpet. Carpet Floor Mats Offer Very Little To No Protection. Custom Fit With Good Looks Rugged Ridge Floor Liners Deep Tread Technology With Chevron Shaped Patyern Are Custom Fitted For Your Vehicle. They Are Designed To Compliment Your Vehicle And Are Available In Black, Grey And Tan To Match Almost Any Vehicle Interior. Front & Second Seat Liners Are Made With Consistent Thickness This Means Strong Protection For The High-traffic Areas Of Your Vehicle.easy To Remove And Clean. Simply Hose Them Off And Go! 4-door Models;gray;3-piece Kit;front And 1pc. Rear;all Weather Construction;oe Quality Thermoplastic Elastomer;molded Chevron Shape Tread Pattern;raised Nibs On The Bottom Keeps Liner In Position
Manufacturer: Rugged Ridge
ID: 14987.04
Category: Interior, gt, floor Mats , amp, Cargo Liners, gt, floor Mats
SKU: Rug14987.04
|
|
|
Smittybilt Xrc Gen2 Front And Rear Bumper And Rock Slider Package (black) - Xrcjk1.1.
The Xrc Gen 2 Max Front Stubby Bumper Has A High Degree Approach Angle And Raised Corners To Maximize Ground Clearance. The Bumper Is Manufactured From 3/16 Cold Rolled Steel And Then Robotically Welded To The Exact Specifications. The Solid D-ring Mounts Are Welded On The Inside And Outside (d-rings Sold Separately). Welds Are Ground Down And Smoothed Out, Then A Two Stage Textured Matte Black Powder Coat Is Applied For The Ultimate Look. The Front Stinger Is 1.75 Tubing And Has Light Tabs That Can Hold Up To Two 9 Lights (lights Sold Separately). The Bumper Is Winch Ready And Can Carry Winches Up To A 10,000 Lb. Rating. The Gen 2 Front Bumper Comes With Fog Light Cutouts. With An Updated Look That Is Sure To Be A Hit With Jeep Owners, The Next Generation Xrc Rear Bumper Was Designed To Meet The Needs Of Off-road Enthusiasts. The New Bumper Features Raised Corners That Allow Greater Approach And Departure Angles - Perfect For Vehicles Running Over Sized Tires. The Redesigned Solid D-ring Mounts Feature An Integrated Recovery Point. Add A Tire Carrier To Your New Smittybilt Gen2 Xrc/src Bumper To Get Bigger Spare Tires On Your Jeep. This New Tire Carrier Design Bolts Directly To The New Xrc/src Gen2 Bumpers, And Includes Roto Pax And Cb Antenna Mounts. Manufactured From 3/16 Inch Solid Plate And Designed To Form To The Vehicle And Protect Your Ride From The Elements. Features A 1.75 Inch Over Rider Tube That Provides Extra Protection. Bolts Up To Factory Holes And Requires No Drilling Or Modifications. Finished In A Two Stage Matte Black Powder Coat. 5 Year Limited Warranty. 2-door Models;matte Black Powdercoat;front And Rear Tire Carrier Bumper With Rocker Guards;manufactured From 3/16 Inch Solid Plate;5-year Limited Warranty
Manufacturer: Smittybilt
ID: Xrcjk1.1
Category: Bumpers, Tire Carriers , amp, Winch Mounts, gt, front Bumpers
SKU: S/bxrcjk1.1
|
|
|
Stainless Steel Brakes Disc To Drum Brake Line Kit - A1480010ss.
Ssbc Includes Everything You Need To Do The Basic Routing Of Your Brake Lines. Ask Your Sales Rep For Information About Adding Brake Hoses To Your Kit To Fit Your Application Brake Line Kit;front Or Rear;incl. Two 20 Ft. Rolls Of 3/16 Inch Stainless Steel Brake Line/two 3 Inch Thru Frame Fittings/1 Chassis Tab
Manufacturer: Stainless Steel Brakes
ID: A1480010ss
Category: Brakes , amp, Steering, gt, brake Lines , amp, Fittings, gt, brake Hydraulic Hose
SKU: Ssba1480010ss
|
|
|
Vertically Driven Products Stubby Bumper End Caps - 31550.
Give Your Jk Wrangler A Rugged Look With The Aggressive Stubby Off Road Version End Caps, Adds More Tire Clearance As Well. Only Fits Factory Oe Bumper. This Is A Simple Do-it Yourself Kit That Reduces Your Bumper Width By 17.5 Inch For Custom Looks And Better Approach Angles. Kit Includes Easy-to-follow Instructions On Cutting Along With All The Necessary Fasteners. End Caps Are Made From 3/16 Inch Thick Roto Molded Plastic With Matching Textured Finish. Made In Usa. 2 And 4-door Models;made From 3/16 Inch Roto Molded Plastic;sold As A Pair;made In U.s.a.
Manufacturer: Vertically Driven Products
ID: 31550
Category: Bumpers, Tire Carriers , amp, Winch Mounts, gt, bumper Accessories, gt, bumper Corner Set
SKU: Vdp31550
|
|
|
Warrior Full Corner Body Armor (polished Aluminum) - 918apa.
Rear Corners Have A Material Thickness Of 1/8 And Not Only Provide Structural Support To The Corner Yard, But Enhance The Appearance Of The Vehicle Too. To Allow Easer Installation, Corners Have Precut Holes For The Gas Tank And Tail Light Openings, Unless Otherwise Specified. Sold In Pairs. Do Not Come Pre-drilled; May Contain 1 Or 2 Pre-drilled Holes For Powder-coat Purposes Tools Required: Drill, Pop-rivet Gun All Polished Aluminum Are Considered Special Order. This Means That They Are Not An Inventory Part Number, And Will Be Subject To An Estimated 4 Week Waiting Period. Special Orders Cannot Be Cancelled Or Returned. Special Order Items Will Still Carry The Standard Warrior Products Warranty. Smooth Polished Aluminum;rear;with Holes;sold As A Pair
Manufacturer: Warrior
ID: 918apa
Category: Armor , amp, Protection, gt, jeep Body Protection, gt, body Corner Guards
SKU: W/i918apa
|
|
|