Direct Oe Replacement Jeep Parts And Accessories Built To The Original Specifications By Omix-ada. Limited Five Year Manufacturers Warranty. 134 4 Cylinder Engine;.030 Oversized

This Heavy Duty And Light Weight Truss System Is Designed To Take Serious Abuse And Reinforce Your Front High Pinion Dana 30 Xj Axle. The 1/4 Thick Truss Top And 10ga. Gusseting Incorporates A Unique Design To Strengthen Both Axle Tubes, Not Just The Long Tube. The Precision Cut And Formed Components Of This Setup Ensure A Hassle-free Installation. Truss Only- No Bushings/joints/keyed Tabs Included. Key Hole Slots On Top Of Truss Where Keyed Tabs Would Go Must Be Filled With Weld. Use This Only If You Aren't Connecting The Passenger Side Uca. This Kit Requires General Welding And Fabrication Skills. Image Is For Illustrative Purposes Only. Truss Only;made Of 1/4 Inch Mild Steel;spans Length Of Long And Short Side;bare Steel

A Tough Powder Coat Finish Protects The Bumper From The Elements. Also, Our Expert Welders Handcraft Each Bumper To Exact Specifications. Choose To Add A Set Of Rigid Industries Dually Or D2 Led Lights Behind The Bumper For Added Rear Lighting. Features: .120 Wall Steel Tube Construction Laser Cut Skid Plates, Tabs And Plates For A Precise Fit Direct Fit - No Cutting Or Weldin Grequired Stainless Steel Hardware **a.d.d. Rear Bumpers Are Designed To Work With Factory Tow Equipment** Bumper Color:hammer Black;panel Color: Satin Black;dually Light Mounts;lights Not Included

High Tensile Strength 4340 Chromoly Is Heat-treated, Tempered And Induction Hardened To Produce These Heavy-duty Axles That Are Up To 40% Stronger Than Stock 1040 Axles. Each Axle Shaft Is Backed By Alloy Usas Exclusive Ten-year Warranty! We Use The Latest Splining Technology To Produce Splines That Are Stronger Than Traditional Cut Splines. The Shafts Are Then Precision Cnc Machined And Magnaflux Inspected For Cracks Before Receiving A Slick Black Anodized Finish. For Use With 94 And Up Or Aftermarket Inner Axle Shafts;30 Spline Outer Chromolly Axle5;alloy Chromolly 5-297x Series U-joints;full Circle Snap Rings;10 Year Warranty On Axle Shafts;3 Year Warranty

Simple Three Wire Installation, Works Where Copper/stainless Steel Tubing Will Not, Ultimate High Performance Dial Face Look, Precision Movement And Extreme Accuracy,1 Year Limited Warranty Electric Oil Pressure Gauge;0 - 100 Psi;0.25 Npt Adapter Fitting;air-core Meter Movement

Bilsteins 7100 Series Shocks Are Available With, Or Without A Remote Reservoir And Are Equipped With A Schrader Valve Fitment. The 7100 Series Are A Totally Versatile Shock That Was Designed To Be Effective In Stock Trucks, Prerunner Trucks, Limited Race Buggy Applications, Sand Buggies And Other Recreational, Off-road Vehicles. The Bilstein 7100 Is Completely Owner Rebuildable For A Lifetime Of High Performance Damping. Other Features Of The 7100 Include: Monotube Gas Pressure Construction, Self-adjusting Deflecting Discvalving, 2 Diameter Shock Body, High-flow Piston Reduces Harshness, Choice Of Valvings, Schrader Valve Shocks With Dividing Piston, Available With 8, 10, 12, & 14 Of Travel. Collapsed Length (in.): 16.1;extended Length (in.): 25.77;travel Length (in): 9.67;compression: 500;rebound: 1500;lower Mount: 1/2 Inch Heim;upper Mount: 1/2 Inch Heim;shaft Diameter: 14mm;reservoir: No;finish: Electroless Nickel With Clear Powdercoat;body Design:

Two-piece Doors Fit Factory Soft Top, Supertop 51609 And Sunrider 51699. Sold As A Pair. *2001-newer Model Tjs Use Different Factory Soft Top Fabric And Will Not Match. 2-piece Door Kits Are The Most Versatile Doors On The Market And Offer: Passenger And Driver Side Upper And Lower Complete With Rotary Or Paddle Handler Kits. Compatible With Supertop #174;, Sunrider; #174;, And Halftop. Snug Fit Is Ensured By Using Adjustable Lower Door Pins And Door Collars. Velcro To Fasten Upper And Lower Doors Together. Double-bulb Weather Stripping Surrounds The Door To Facilitate A Good Seal. Exterior Fabric Color Matches Bestop And Factory Original Soft Tops. Black Vinyl;slide Style Door Latches (strikers Included);passenger And Driver Side Upper And Lower Complete With Rotary Or Padcle Handle Kits;compatible With Supertop, Sunrider And Halftop

For Over 50 Years, Crown Automotive Has Been The Leading Manufacturer And Distributor Of Replacement Parts For Jeep Vehicles. With Over 8,000 Different Part Numberrs, Including Many Factory-discontinued Items, We Offer You Exceptional Quality That Is Only Matched By An Exceptional Warranty. 2 And 4-door Models;right Hand Drive Models;left Tie Rod End On Tie Rod

E16;fifth Wheel Hitch Head Unit;incl. E16 Head Unit Pn[16515];fifth Wheel Trailer Hitch Leg Kit Pn[16021];ram Oem

The All New G2 Heavy Duty Jk Rear Dana44 Heavy Duty Coil Buckets Are Designed To Be Used With The G2 Rear Axle Truss And Armor System To Give Your Jk The Strength It Needs To Take Serious Abuse. Constructed From 1/4 Thick Main Components And 1/8 Thick Reinforcement Plates, All Components Are Laser Cut To Precise Specifications To Ensure A Perfect Fit For Easy Installation. Welding Is Required. Professional Welding Skills Are Strongly Recommended. Rear Coil Buckets For 68-2052-1;2 And 4-door Models;heavy-duty Steel Construction;unpainted;welding-required

Dish: 3-3/4. Spoke: Polished Aluminum. 14-3/4andquot;diameter;dish: 3-3/4andquot;spoke: Polished Aluminum;grip: Black Hand-stitched Leather;will Not Work On Column Equiped With An Airbag

The K&n 57-1567 Fipk Air Intake System Replaces The Restrictive Factory Air Filter And Air Intake Housing In Specific Jeep Patriot And Jeep Compass Models. K&n Air Intakes Are Designed To Dramatically Reduce Intake Restriction As They Smooth And Straighten Air Flow. This Allows Your Engine To Inhale A Larger Amount Of Air With Less Effort Than The Factory Air Filter Assembly. More Air Means More Usable Power And Acceleration Throughout The Engines Rpm Range. This Air Intake Comes With A Black Rubber Topped K&n High-flow Air Filter And A Heat Shield That Installs Into The Original Air Box Space. Air Is Directed Through An Aerodynamically Engineered Intake Tube Into The Engines Throttle Body For A Guaranteed Power Gain. The Tube Accommodates The Factory Air Temperature Sensor And Crank Case Vent Hose. The Oversized Cone Shaped Air Filter Can Be Used For Up To 100,000 Miles Before Servicing Is Needed Depending On Driving Conditions. This Air Intake Is Relatively Easy To Install Usually In 90 Minutes Or Less Using Existing Factory Mounting Points. The Tools Needed Are A Screwdriver, Pliers, A Ratchet Set And Several Wrenches. Filtercharger Injection Performance Kit;incl. Air Filter/heat Shield/tubing;estimated Horsepower Gain 6.35 Hp At 4397 Rpm

Fuel Wheels Are Available In Just About Any Bolt Pattern And Offset Combination. Fuel Up Your Truck With The Latest In Off-road Design. Whether You Are On Or Off The Road, Fuel Off-road Wheels Offer The Perfect Blend Of Style, Size, And Application For Your Truck Or Suv. Wheel Size: 20x9;8 On 170 Bolt Patter;noffset: -12;backspace: 4.5;max Load: 3500;finish: Black

Has Your Jeeps Wiper Fluid Reservoir Cracked? Is It Time To Fix It So You Can Clean Your Windshield? Omix-ada Has The Exact Replacement You Need.

Chevy Silverado Front Winch Bumper 2008-2012 Silverado 2500/3500, Round Light Mounts And Pre Runner Guard, Unfinished Raw Steel From The Road Armor Stealth Series. Recessed Light Pods For Dual 4-inch-diameter Lights (piaa 510 Or Warn 350f Recommended For Most Applications), Fully Welded Front And Back Shackle Mounts Standard, Winch Mount To House Up To A 12k Non-integrated Winch , Faceted 3/16 Outer Shell, 1/4-inch-thick Internal Mounting Brackets And Gussets, All Guard Tubing Is .120-wall.combat Proven And Trusted By The United States Military, Life Time Guarantee Against Breakage. Bare Steel;winch Mount;prerunner Guard;hot Rolled And Laser Cut 3/16 Inch Plate Steel;works With Factory Front Sensors;lights Are Not Included

Ford F-150 Front Bumper Winch, Unfinished Raw Steel 2009-2014 Ford F-150, Square Light Ports With Lonestar Guard. Recessed Light Pods For Square Dually/d2 Series Lights, Fully Welded Front And Back Shackle Mounts Standard, Winch Mount Tk House Up To A 12k Non-integratde Winch ; Call For Specific Details On Vehicle Year Make And Model That Applies), Faceted 3/16 Outer Shell, 1/4-inch-thick Internal Mounting Brackets And Gussets, All Guard Tubing Is .120-wall, Combat Proven And Trusted By The United States Military, Life Time Guarantee Against Breakage. Front Stealth Bumper;w/ Winch Mount;lonestar Guard;light Mount;bare Steel;proudly Made In Texas, U.s.a.;hot Rolled And Laser Cut 3/16 Inch Plate Steel;lights Are Not Included

Replace Weak, Worn, Factory Rubber Bushings With These Polyurethane Kits From Rubicon Express And Keep Your Rigs Springs Free From Noise And Metal On Metal Contact. Does 2 Leaf Springs;for Use With Part Number R/ere1462

On Your Next Trail Ride, Protect Your Oil Pan And Transmission On Your Jk With The River Raider Off Road Oil Pan And Transmission Skid Plate. Available In Steel Or Aluminum, In Bare Metal Or With A Black Satin Smooth Finish. Our Aluminum Skid System Weighs Approximately 1/2 The Weight Of Our Steel Skids. Uhmw Stands For Ultra-high Molecular Weigh Polyethylene And These 3/16 Thick Panels Are Specially Designed For Sliding Over Rocks. They Can Be Used In The Opinion Of The Steel Skids, But Are Not Really Necessary With The Steel. We Do Recommend Them If You Are Getting The Aluminum. Our Aluminum Skids Are Made From 1/4 Material And Will Protect Your System, But They Will Get Scratched If You Wheel Them Hard So The Uhmw Protects The Aluminum And Helps Them To Slide Over The Rocks Ins Tead Of Getting Scratched Up. 2 And 4-door Models;with Hemi Engine;black Powder Coat;1/4 Inch Aluminum;uhmw Panels

Lifetime Warranty - Rugged Ridge Floor Liners Are Guaranteed To Weather The Elements And Climate. Other Manufacturers May Only Carry A 3, 5 Or 10 Year Warranty. Thermoplastic Material - Rugged Ridge Floor Liners Are Made Of High Pressure Injection Molded Oe-quality Thermoplastic That Looks And Feels Like Rubber, But Provides A Nonslip Surface. They Will Not Fade In The Sun & Our Proprietary Material Is Resistant To Oil, Gas And Battery Acid. Nibbed And Floor Hook - Rugged Ridge Floor Liners Take Advantage Of Factory Floor Hooks And Have Nibs On The Back Of The Liners Help Keep The Liner In Place. Raised Lip And Retaining Edges - Spills Ultimately Will Happen And Your Feet Drag Dirt, Mud, Snow Or Water Into Your Vehicle. Without A Way To Contain The Spils Or Corosive Material Your Shoes Pick Up The Mess Makes It To The Door Sill And Eventually The Carpet. Rugged Ridge Floor Liners Have A Raised Lip Retaining Edges Around Their Perimeter Of Your Floor Board To Keep The Spills And Mess Off Your Vehicles Carpet. Carpet Floor Mats Offer Very Little To No Protection. Custom Fit With Good Looks Rugged Ridge Floor Liners Deep Tread Technology With Chevron Shaped Pattern Are Custom Fitted For Your Vehicle. They Are Designed To Compliment Your Vehicle And Are Available In Black, Grey And Tan To Match Almost Any Vehicle Interior. Front & Second Seat Liners Are Made With Consistent Thickness This Means Strong Protection For The High-traffic Areas Of Your Vehicle.easy To Remove And Clean. Simply Hose Them Off And Go! 2-door Models;black;5-piece Kit Includes Front, Rear And Cargo Floor Liners;all Weather Construction;oe Quality Thermoplastic Elastomer;molded Chevron Shape Tread Pattern;raused Nibs On The Bottom Keeps Liner In Position

Everything You Need To Make The Interior Of Your Jeep As Useful As Possible! This New Package Features Our Most Popular Roll Bar Add-ons Adding Comfort, Storage And Safety To Your Jeep Wrangler. Each Pre-packed Package Includes A Pair Of Ultimate Grab Handles For Over The Driver And Passenger Doors, Rear Door Grab Handles That Attach Into Factory Mounting Points, Insulated Roll Bar Drink Cup Holders (2), A Roll Bar Sunglass/zippered Storage Pouch, A 3lb Fire Extinguisher Holder And A Handy Havy-duty Flashlight Holder. All Of These Accessories Easily Attach To Your Factory Roll Bar With Heavy-duty Velcro Straps Or To Factory Mounting Points. No Drilling Required! All Rugged Ridge Accessories Feature An Industry Leading Limited 3-year Warranty. 2 And 4-door Models;black;9-piece Kit;ultimate Grab Handles For Front And Rear;fire Extinguisher Holder;sport Bar Cup Holders;sport Bar Flashlight Holder;roll Bar Sun Glasses Holder

Synergy Manufacturing Products & Systems Have Been Designed By Real Engineers With 10+ Years Of Suspension Design & Experience In The Off Road Industry. All Synergy Products Are Designed With The Use Of The Latest Cad Engineering Software To Ensure The Highest Level Of Fit, Finish, And Performance. Rear Springs Only;excellent Off-road Performance While Preserving Ride Quality;frequency Balanced And Tuned Spring Rates To Maximize Suspension Performance On And Off-road;abrasion Resistant Black Powder Coat Finish For Maximum Durability And Corrosion Resistance;sold As A Pair;made In The U.s.a

The Teraflex Tera44 Heavy Duty Jk Rubicon Replacement Axle (r44) Is The Perfect Solution For Bent, Broken Or Damaged Front Axles In Jk Wrangler Rubicon Vehicles. The Tera44 Is A Direct Bolt-in Upgrade For Jeep Jk Owners Looking To Beef Up One Of The Weak Areas Of Their Jeep. The Differential Center Section Is Engineered For Extreme Use And Is Constructed With Increased Rib Gussets In A Ductile Cast Iron Housing. The Smooth Radius Bottom Is Designed To Glide Over Rocks & Obstacles, And Incorporates A Bottom Oil Drain Hole For Simple Fluid Changes. By Integrating The Upper Control Arm Mount In The Factory Location On The Housing Unnecessary Bracketry Is Eliminated. By Increasing The Aaxle Tube Diameter To The Largest In The Industry, The 3.25 Inch Od X 0.5 Inch Wall Dom Tubing Make Axle Bending And Breaking A Thing Of The Past And Is No Longer A Concern. Redesigned Forged Inner Knuckles Increase Section Strength To Eliminate Ball Joint Separation. The Replacement Axle Housing Assembly Includes The Tera44 Center Section, 3.25 Inch Od Tubes, 1/4 Inch Thick Cnc Laser Cut Axle Brackets With Integrated Lower Bracket Skid Plates, Reinforced Front Trackbar Mount (ties Into Spring Pad) For Greater Strength, And Forged Inner Knuckles. Pre-installed Inner Seals And Upper Control Arm Bushings Make The Upgrade Seamless. A Premium Uv Protected Triple-stage Powder Coat Process Provides Superior Corrosion Resistance. Simply Transfer Your Existing Internal Components, Outer Knuckle Assembly, And Brakes To The New Housing! The Tera44 Retains All Jk Esp, Abs & Speedometer Sensor Capability, And Maintains The Factory Jk Rubicon Locker (r44 Model Only). The Tera44 Is 100% Engineered, Designed, And Hand Assembled In The Usa With 100% New Components. The Tera44 Comes With A 1 Year Unlimited Mileage, No Excuses Warranty. Note: There Are Two Versions Of The Tera44 Available For Jk Wranglers; Tera44 R44= Direct Replacement Foor The Factory Jk Rubicon Dana 44 Housing (re-using Factory Locker & 2 And 4-door Models;for Rubicon Locker Applications;front Axle;direct Bolt-in Upgrade;with .5 Inch Wall Tube;1/2 Inch Axle Tube

Our Front Springs Feature A Full Military Wrap On The Front And The 1/4 Wrap On The Rear. Spirng Rate Is 220 Lbs Per Inch. Leaf Pack Is 6 Leaves. Springs Are 47 Long As Measured Along The Top Leaf. Pin To Center Of Front Mount Is 22 And Pin To Center Of The Shackle Mount Is 25. New Poly Bushings And Left Side Spring Pad Are Included With Springs. Super Flex Leaf Springs;lift Height: 5 Inch;mounting Location: Front;not A Direct Oem Replacement

480c Is A Truly Rated, 200 Psi-rated Compressor. It Features Horizontal Cooling Fins And A Trapezoidal Head Design, A Standard 3/8 Inch Stainless Steel Braided Leader Hose With 3/8 Inch Npt Inline Check Valve And Insulated Wiring.se Thread Sealant For Proper Installation. Teflon Tape Is Not Recommended. Properly Sealed, Recommended Torque Is 12 To 15 Ft. Lbs. 12-volt;permanent Magnetic Motor;duty Cycle: 100% @ 100 Psi (50% @ 200 Psi);max. Working Pressure: 200 Psi;max. Air Tank Size: 5.0 Gallon

Our Heavy-duty Rock Crawler Bumpers Are Designed For The Off-road Enthusiast Who Wants Rugged Construction, And A Rounded Underside To Provide Greater Entry And Exit Clearance. Constructed From High Quality Steel, Bumpers Are Black Powder-coated For Lasting Durability And Good Looks. Black Powdercoated;rugged Construction;rounded Underside To Provide Greater Entry And Exit Clearance