|
|
Nitto Lt245/75r-16 Tire, Dura Grappler - 205-090.
The Dura Grappler Is A Highway Terrain Tire That Provides Outstanding Mileage, Durability And Traction. Revolutionary Dura-bely Three Steel-belted Technology Reinforces And Stabilizes The Tread Blocks To Prevent Heat Build Up. This Reduced Irregular Wear And Improves Tread Life. The Dura Grappler Will Be Available In Popular 'e' Load Range, Heavy-duty Lt Sizes And With Two Different Sidewall Designs So You Can Customize Your Look. Whether You're Working On A Construction Site Or Towing Your Toys, The Dura Grappler Was Designed To Meet Your Durability And Mileage Needs. Tire Size: Lt245/75r16;tread Depth = 15.6/32;overall Diameter: 30.47;load Rating: E;speed Rating: R;approved Rim Size: 6.5 - 8;black Side Wall
Manufacturer: Nitto
ID: 205-090
Category: Tires , amp, Wheels, gt, jeep Tires
SKU: Nit205-090
|
|
|
Body Armor Pro-series Stubby Front Winch Bumper (black) - Jk-19536.
The Pro-series Stubby Front W Inch Bumper Is Loaded With Features That Make This Bumper One Of The Best On The Market. It Features An Integrated Front Skid Plate That Runs Down To The Crash Bar. An Aggressive Approach Angle Makes Steep Climbs Easier. It Also Uses An Integrated Shorty Stinger Hoop With Gusset Support Braces. The Winch Plate Is Constructed Of Beefy 1/4 Steel Plate. The Massive Recovery Points Are Tied Directly To The Frame. To Add A Wider Profile You Can Add Optional Bumper Wings (b/ajk-19536-wc For Cube Lights Or B/a195 36-wr For 3 Round Lights). There Is Also No Need To Relocate The Vacuum Pump On Newer Models. 2 And 4-door Models;textured Black Powdercoat;3/16 Inch Steel Plate Construction;massive Recovery Points Tied To Frame;aggressive Approach Angle;integrated Front Skid Plate;optional Bumper Wings For A Wider Profile
Manufacturer: Body Armor 4x4
ID: Jk-19536
Category: Bumpers, Tire Carriers , amp, Winch Mounts, gt, front Bumpers
SKU: B/ajk-19536
|
|
|
Bestop Rear Seat Cover (black Diamond) -- 29229-35.
As You Enjoy The Open-air Experience, Your Seats Are Suffering. Ultraviolet Light, Dust, Mud, Water - All That Stuff, Will Cause Permanent Damage. Protect Or Make Presentable All The Seats In Your Wrangler Or Cj. These Custom Seat Covers Are So Easy To Install (no Tools Required!) That In A Mere 10 Minutes You Can Have Them On Or Off - Whatever The Need May Be. The Fit Is Tight (no Shifting Or Bunching) And Does Not Inhibit Any Seat Functions. Comes Complete With Instructions And All The Necessary Hardware. Black Diamond;easy Bungee-cord Attachment;custom Designed To Fit Over Factory Original Seats;water Resistant
Manufacturer: Bestop
ID: 29129-35
Category: Interior, gt, jeep Seat Covers
SKU: Bst29229-35
|
|
|
Bilstein 5100 Series Shock Absorber - 24-064576.
Bilsteins 5100 Series Shocks Offer Traditional Bilstein Technology With Applications For Liftted Trucks, Jeeps And Prerunners. 5100 Series Shocks Feature Bilsteins Superior Single Tube High Gas Pressure Design For The Upmost In Consistent Fade-free Performance And Long Life. Features Include:monotube Gas Pressure Construction, Self-adjusting Deflecting Disc Valving, High-flow Piston Reduces Harshness, Independent Rebound & Compression Tuning, Larger Working Piston Area For Exact Damping, Superior Control For Large Diameter Tires And Designed For Specific Manufacturer Lift Kits Utilizing The Stock O.e.m. Mounting Configuration. Bilstein 5100 Series Shock Absorber;collapsed Length (in.): 16.97;extended Length (in.): 28.44;travel Length (in): 11.47;lower Mount: Eye 12.7mm;upper Mount: Stem;shaft Diameter: 14mm;reservoir: No;finish: Zinc Plated;body Design: 46mm Id Smooth Body (non-coilover);internal Design: Mono Tube;boot Included: Yes
Manufacturer: Bilstein
ID: 24-064576
Category: Suspension And Shocks, gt, shock Absorbers
SKU: Bil24-064576
|
|
|
Borla Stainless Steel Exhaust System - 140218.
With 30 Years Of Race-proven Engineering Behind Them Borla Is One Of The Premier Manufacturers Of Performance Exhaust Systems In The World. Manufactured From High Quality Materials And With The Latest Technology Borla Provides You With Just What You Are Looking For, Sound, Performance And Looks. Borla S Signature Sound Is Well Recognized By Automotive Enthusiasts Around The World. Join The Winning Team With A Quality Borla Exhaust Systemm. 4-door Models;3.8l 6 Cylinder Engine;split Rear Exit;high Brand Austenitic Stainless Steel;million Mile Warranty
Manufacturer: Borla
ID: 140218
Category: Performance Parts, gt, exhaust Systems, Headers, Pipes And Hardware, gt, ex Haust System Kit
SKU: Bor140218
|
|
|
4wd Cat-back Exhaust Kit - 1022030.
Fits Grand Cherokees With 4.0l, 4.7l Or 5.9l Engines. Are You Looking For An Exhaust System That Will Produce That Deep Throaty Sound When You Crank It Up But Not Cost An Arm And A Leg? Then Check Out The New 4wheel Drive Hardware Exhaust Systems For Grand Cherokee. These High-quality Systems Are Available In Either Aluminized Or Stainless Steel At Prices That You Can Easily Afford! These Kits Are Made Of 2-1/2 Or 3 Aluminized 16 Gauge Mandrel Bent Steel Tubing Tailpipe. They Also Include A Double-wrapped Welded Aluminized Steel Turbo Muffler And All Steel Clamps And Hangers. 4.0l 6 Cylinder, 4.7l Or 5.9l 8 Cylinder Engines;2-1/2 Inchaluminized Tubing
Manufacturer: 4wheel Drive Hardware
ID: 1022030
Category: Performance Parts, gt, exhaust Systems, Headers, Pipes And Hardware, gt, exhaust System Kit
SKU: Cre1022030
|
|
|
Crown Automotive Clutch Kit - 52104732ab.
For Over 50 Years, Crown Automotive Has Been The Leading Manufacturer And Distributor Of Replacement Parts For Jeep Vehicles. With Over 8,000 Different Part Numbers, Including Many Factory-discontinued Items, We Offer You Exceptional Quality That Is Only Matched By An Exceptional Warranty. 2 And 4-door Models;with 3.8l V6 Engine;includes: Pressure Plate And Clutch Disc Only;clutch Kit
Manufacturer: Crown Automotive
ID: 52104732ab
Category: Replacement Drivetrain Parts, gt, replacement Clutch Parts, gt, vintage Clutch Linkage Parts
SKU: Cro52104732ab
|
|
|
Pro Comp 4 Inch Lift Kit With Es3000 Shocks - K3068.
Pro Comp Is Driven By Genuine Off Road Enthusiasts. Pro Comp Suspension Products Reflect Customer-driven, Racing Influenced Technology And Engineering With A Focus On World-class Manufacturing Processes And Techniques. When It Comes To Your Vehicles Handling, Look And Performance, We Know You Don't Make Compromises And Either Do We. From The Middle Of Downtown To The Middle Of Nowhere Pro Comp Will Get You There And Back. Front Lift: Leaf Springs;steering Correction: Pitman Arm;rear Lift: Springs And U-bolts;shocks: Front/rear Es3000 Shocks;max Tire Size: 33x12.50;wheel Size Range: 15-20 Inch;wheel Width Range: 8-12 Inch;min-max Backspace: 3.25-4.5
Manufacturer: Pro Conp Suspension
ID: K3068
Category: Suspension And Shocks, gt, suspension Lift Kits
SKU: Expk3068
|
|
|
Flaming River Gm Ignition Key Columnshift Column - Fr30101ss.
Replace That Old Worn Out Steering Column The Easy Way, With One Of Flaming Rivers Tilt Steering Columns. These Flaming River Six-position Tilt Steering Columns Feature All New Components And 2 Tubes So They Fit Perfectly To Your Stock Dash Panel. Every Floor Shift Style Column Comes With Stainless Steel Tilt/turn Signal Levers And Hazard Knob, A Gm 4-1/4 Wiring Connector, And Canceling Cam. Automatic Column Shifts Come With The Same Features As Floor Shift Columns With Added Gearshift Lever, Illuminated Gearshift Indicator And A Removable 12 Position Linkage Arm For Easy Alignment And A Neutral Safety Switch. Existing Ignition Switch Will Need To Be Relocated To The Dashboard And Will Requir Ea New Lock & Cylinder (sold Separately). *column Dash Mount Must Be Used To Install Column. **flaming River Steering Shaft Must Be Used With Column. ***4-1/4 Plug Adapter Kit Is Required To Install Ignition Switch To Column. Polished Stainless Steel;33 Inch Column
Manufacturer: Flaming River
ID: Fr30101ss
Category: Brakes , amp, Steering, gt, replacement Steering Components, gt, steering Column Tube
SKU: Flmfr30101ss
|
|
|
Jw Speaker Evolution 8900 Led Headlight (black) - 550111.
The Evolution Is A High Performance Led Headlight, Designed To Be A Direct Replacement For 5 X 7 Headlights. It Offers Superior Visibility, Safety And Durability Making It The Most Advanced Led Headlight. Sold Individually. Black Inner Bezel;uv-resistant Polycarbonate Lens;46,000 To 60,000 Candela;sold Individually
Manufacturer: Jw Speaker
ID: 0550111
Category: Lighting , amp, Lighting Accessories, gt, replacement Headlights, Tail Lights, And Factory Lighting, gt, headlight Assembly
SKU: J/w0550111
|
|
|
Kentrol Door Hinge Set (stainless Steel) - 30576.
Why Buy Kentrol Stainless Steel? Because It Is The Best! Not All Stainless Steel Products Are Created Equal. Kentrol Products Are Constructed Of Virgin Metal, 304 Surgical, Stainless Steel. This Stuff Just Will Not Rust! It Is Easy To Care For Too - An Occasional Waxing Will Keep The Mirror-like Shine Looking Brand New. And To Top It Off - All Kentrol Products Come Complete With Stainless Steel Hardware. 4-door Models;8-piece Set
Manufacturer: Kentrol
ID: 30576
Category: Replacement Exterior Parts, gt, replacement Windshield And Wiper Parts, gt, tj Wrangler Windshield Frame Parts
SKU: Ken30576
|
|
|
Kentrol Backsidel Icense Plate With Led - 80707.
Kentrol's Backside License Plate Mount With Led For Your Jk Wrangler, Rubicon And Unlimited Comes In A Black Textured Finish That Resembles Your Oe Door Handles And Side Mirrors. Each Set Is Inspected For Fit, Finish, And Function. It Comes Complete With All Hardware Needed For Installation. All Kentrol Products Come With A Limited Lifetime Warranty. Black Powder Coat;304 Stainless Steel;relocates License Plate;led 3rd Brake Light;includes Stainless Steel Hardware
Manufacturer: Kentrol
ID: 80707
Category: Exterior Parts , amp, Car Care , Fender Flares, gt, body Styling, gt, license Plate Bracket
SKU: Ken80707
|
|
|
Omix-ada Top Cowl (primer) - 12023.47.
Direct Oe Replacement Jeep Parts And Accessories Built To The Original Specifications By Omix-ada. Limited Five Year Manufacturers Warranty. Black Primer;sold Individually;top Cowl
Manufacturer: Omix-ada
ID: 12023.47
Category: Replacement Exterior Parts, gt, replacement Body Parts, gt, cj2a, 3a And 3b Replacement Parts
SKU: Oai12023.47
|
|
|
Omix-ada Steering Dampener - 18040.02.
Direct Oe Replacement Jeep Parts And Accessories Built To The Original Specifications In The Name Of Omix-ada. Limited Five Year Manufacturers Warranty. Steering Dampner
Manufacturer: Omix-ada
ID: 18040.02
Category: Replacement Brakes, Steering And Suspension Parts, gt, replacement Suspension Parts, gt, zj Grand Cherokee Replacement Suspension
SKU: Oai18040.02
|
|
|
Poison Spyder Hood Louver - 11-53-010-pc.
Many Of The Problems Jeeps And Slow-moving Rockcrawlers Encounter On The Trail Are Due To Overheating. At Slow Speeds There Simply Isn't Enough Airflow Through The Engine Compartment To Keep Things Cool. Worse, Engine Compartments On Most Vehicles Are Poorly Vented, With No Way For Hot Air (which Rises) To Escape From The Upper Areas Of The Engine Bay. Poison Spyders Hood Louvers Solve That Problem By Promoting Proper Airflow Through And Out Of The Engine Compartment, While Adding Great Looks To Your Jeep. Fits 1976 To 1986 Cj;black Powder Coat;promotes Airflow Through And Out Of The Engine Bay, Keeping Under-hood Temperatures Cooler;made Of Cnc Laser Cut L Ight Weight Aluminum;template And Instructions Included For Easy Installaton (requires Cutting Hood);stainless Steel Button-head Hardware Included
Manufacturer: Poison Spyder Customs
ID: 11-53-010-pc
Category: Exterior Parts , amp, Car Care, gt, exterior Billet Accessories, gt, hood Vents
SKU: Psc11-53-010-pc
|
|
|
Rubicon Express Mono-tube Shock Absorber - Rxj703b.
Rubicon's Extreme-duty Mono-tube Shocks Are Developed And Tuned Specifically For Each Application. This Is Tbe Only Way To Deliver Maximum Control While Not Compromising Ride Quality, High-speed Stability And Comfort For Those Extended Trips Over The Toughest Terrain. 2 And 4-door Models;mounting Location: Front;extended Length: 23.50 Inch;collapsed Length14.90 Inch;travel Length: 8.60 Inch;includes Black Shock Boot;sold As: Each
Manufacturer: Rubicon Express
ID: Rxj703b
Category: Suspension And Shocks, gt, shock Absorbers
SKU: R/erxj703b
|
|
|
River Raider Oil Pan And Transmission Skid Plate - R/rarm-1090-1pc.
On Your Next Trail Ride, Protect Your Oil Pan And Transmission On Your Jk With The River Raider Off Road Oil Pan And Transmission Skid Plate. Available In Steel Or Aluminum, In Bare Metal Or With A Black Satin Smooth Finish. Our Aluminum Skid System Weighs Approximately 1/2 The Weight Of Our Steel Skids. 2 And 4-door Models;black Powder Coat;3/16 Inch Steel
Manufacturer: River Raider Off Road
ID: Arm-1090-1pc
Category: Armor , amp, Protection, gt, skid Plates
SKU: R/rarm-1090-1pc
|
|
|
Rugged Ridge Receiver Hitch Kit - 11580.61.
Looking For An Add On Accessory So That You Can Easily Tow A Trailer? Rugged Ridge Has You Covered With This Kit That Includes A Receiver Hitch And Rugged Ridge Hitch Cover. 2 And 4-door Models;kit Includes: Receiver Hitch And Hitch Plug
Manufacturer: Rugged Ridge
ID: 11580.61
Category: Towing, gt, hitches, gt, trailer Hitch
SKU: Rug11580.61
|
|
|
Rugged Ridge Round Led Light And X Clamp Kit - 15210.04.
Looking For The Ultimate Lighting Combination For Your Off-road Adventure? The X-clamps Exclusive Pivotal Fit Technology And Round Led Light Kit Combination Offers Value And Convenience For A Easy Diy Installation And A Better Off-road Lighting Experience. 3.5 Inch Round;black Light And Black X Clamp;uses 18 Watts;6 Leds Inside Light;driving Light Pattern;marine Grade 316 Stainless Steel Hardware;x Clamp Fits 2.25 Inch To 3 Inch Tubing;includes One Led And One X Clamp
Manufacturer: Rugged Ridge
ID: 15210.04
Category: Lighting , amp, Lighting Accessories, gt, off-road Lighting
SKU: Rug15210.04
|
|
|
Smittybilt Xrc Gen2 Front Bumper With Winch Plate - Light Texture Finish (black) - 76807lt.
The Xrc Gen 2 Max Front Stubby Bumper Has A High Degree Approach Angle And Raised Corners To Maximize Ground Clearance. The Bumper Is Manufactured From 3/16 Cold Rolled Steel And Then Robotically Welded To The Exact Specifications. The Solid D-ring Mounts Are Welded On The Inside And Outside (d-rings Sold Separately). Welds Are Ground Down Andd Smoothed Out, Then A Three Stage Light Texture Black Powder Coat Is Applied For The Ultimate Look. The Front Stinger Is 1.75 Tubing And Has Light Tabs That Can Hold Up To Two 9 Lights (lights Sold Separately). The Bumper Is Winch Ready And Can Carry Winches Up To A 10,000 Lb. Rating. The Gen 2 Front Bumper Comes With Fog Light Cutouts. Light Texture Black Finish;new Gen2 Solid D-ring And Jack Point Mount - Welded On The Inside And Out;aggressive Design For With Raised Corners For Better Entry And Exit Angles For The Most Extreme Conditions;1.75 120 Wall Over Rider And Kickers;lower Design Winch Plate Allows Greater Air Flow And Rated To Accommodate Up To 12k Winch;o.e. Fog Light Provision;manufactured From 3/16 Cold Rolled Steel;tow-able D-ring Mounts;powder Coat Finish With 5-year Limited Warranty;smittybilt Advantage Lifetime Warranty
Manufacturer: Smittybilt
ID: 76807lt
Category: Bumpers, Irk Carriers , amp, Winch Mounts, gt, front Bumpers
SKU: S/b76807lt
|
|
|
Skyjacker 2.5 Inch Lift Kit With Hydro Shocks - Yj21bkh.
Whether You're Looking For A Mild Lift To Add Larger Tires Or Looking To Make An Off-road Monster Skyjacker Has A Lift Kit For You. Sport Lift Kit;2.5 Inch Lift;incl. Front/rear Leaf Springs;front/rear Leaf Spring Bushings/sleeves;front/rear U-bolts;front/rear Hydro 7000 Shocks
Manufacturer: Skyjacker
ID: Yj21bkh
Category: Suspension And Shocks, gt, suspension Lift Kits
SKU: Skyyj21bkh
|
|
|
Superwinch C1000 Crane Winch - 3002.
Need A Winch That Will Safely Lift And Hold Up To 1,000 Lbs. For Your Home Or Business? Superwinch Has Just What You Need With Their C1000 Crane Series Winches. This Winch Can Be Used As An Overhead Hoist Or To Suspend A Load. This Winch Also Has A 5:1 Safety Factor Standard Features Power In And Power Out; Wire Rope Tensioning Plate; Handsaver; Full Load Mechanical Brake; Twin Wire Rope Set Screws12v Dc With Roller Fairlead, Motor Cover And 15' Handheld Remote Rated Line Pull = 1000 Lbs.;voltage: 12v;motor: = 1.3 Hp;remote Control And 15 Ft. Lead;gear Ratio: = 159:1;weight: 33 Lbs.;wire Rope: = N/a;fairlead: = Roller;winch Type: = Electric
Manufacturer: Superwinch
ID: 03002
Category: Winches And Trail Accessories, gt, winches
SKU: Swi03002
|
|
|
Warrior Sideplates (black Steel) - S936.
Sideplates Protect The Rocker Panel Area Below The Door And Enhance The Appearance Of The Vehicle Too. 2-door Models;black Powder Coat Steel;hardware Included;drilling Required;sold As A Pair
Manufacturer: Warrior
ID: S936
Category: Exterior Parts , amp, Car Care , Fender Flares, gt, body Styling, gt, rocker Panel Molding
SKU: W/is936
|
|
|
Warn Winch Mountting Plate (black) - 88418.
For Use With Factory Front Bumper Only, Mounts The M8274-50 Winch Only. 2 And 4-door Models;for M8274-50 Only;will Only Work With Factory Front Bumper
Manufacturer: Warn
ID: 88418
Category: Winches And Trail Accessories, gt, winch Accessories, gt, winch Mount Plate
SKU: War88418
|
|
|
Wilco Offroad Mc2x Front Bumper Combo - Worjksbk1.
If You Are Like Us, Your Jeeps Build Is Constantly Evolving. The Mc2x Front Bumper Was Born From A Need To Be Ready For Whatever Your Next Adventure Has In Store. With Two Base Metal Options, Four Stinger Variations, And A Plethora Of Accessories, The Wilco Off-road Mc2x Front Bumper For Jeep Jk Is Ready For Whatever The Adventure Calls For. Built From High-strength Carbon Steel For Maximum Strength. Or For Extreme Duty Upgrade To The Aluminum Chromoly Composite Option That Combines The Strength Of 4130 Chromoly Steel With The Weight-saving Attributes Of 6061 T6 Aluminum Alloy To Protect The Vehicle, Reduce Weight, And To Better Slide Over Rock Obstacles On The Trail. 2 And 4-door Models;black Powder Coat Steel;modular Design For Customized Look And Function;with Recovery Modular Bar;bolt On Installation;limited Lifetime Warranty;made In The U.s.a
Manufacturer: Wilco Offroad
ID: Jksbk1
Category: Bumpers, Tire Carriers , amp, Winch Mounts, gt, front Bumpers
SKU: Worjksbk1
|
|
|